PO creation exact time

Hi Gurus,
Where we can see the exact time of Po creation time
please suggest
regards
subbu

hi
not possible to find time of po creation
but u can get the time from the messages as the message is generated at time of po saving only
so go to me23n
here click on messages and click on further data button u will get the date and time at left
http://www.sap-img.com/materials/how-to-get-the-po-create-date-and-time.htm
regards
KI

Similar Messages

Incrementing creation date times to preserve sort

I've got bunches of scanned analog photos. The creation dates were the scan time, not when the photos were taken. And some are out of order.
I don't remember the exact times and dates, but I do recollect the sequence. And I can use a "user order" within LR.
But how do I preserve that order in the metadata in the files for use in other applications, etc? I can set a creation date, but it appears to be the same for all. How I could increment the date/time so that I'd end up with the same sequence when sorted by "capture time"?
Rob

John, your memory is better than mine. And some of the shots have an obvious sequence, but I don't even know the year (old old photos). Unfortunately with many the service that scanned them also tossed them like salad, and the frames on prints, which sometimes had month/date info, were cut off on the scans.
So arbitrarily adding dates could result in duplicates, but most importantly it may delude those I distribute the files to into thinking they are somehow valid dates. So I'll stick with the scan date and file renaming. Don't want somebody to see a picture of granny and wonder why she was looking so young when the picture was snapped.
I've been looking around, thinking there might be a convention for sets of photos and sequences, with perhaps a "x of y" type parameter which would indicate it was part of a set, since photos were commonly taken that way (I have old photos with names like "Roll 1 -3" for example), and since it might be a holdover from then, even when sequential filenames came into use. Even today with camera phones and such I still get lots of filename dups. Or perhaps it was useful when one is shooting sequences or bursts in sports. But I haven't found anything explicit yet. The IPTC extension "object title" might be suitable, since it's used for accession numbers. But not many applications would sort on that.
And aside from sequence, historical dates can be entered into the IPTC extension "date [object] created." But if the sequence matters, and you only know the year, it's still a problem.
So overall I think the file renaming is the way to go, with some keywords or descriptors in IPTC to indicate the name of the set. Like filename "1 of 42 Aunt Matilda's wedding." So even if the photos get moved around, separated, etc the new owner will be able to discern they're part of a set, and with access to metadata get even more info if the filenames somehow got borked.
Rob

How to get the exact time when condition records has been created?

Hello All,
Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
Await your valuable inputs on the same.
Regards,
Hrishi

Dear Hrishi,
Try with this
Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
I hope this will help you,
Regards,
Murali.

Creation of Time Dependent Hierarchy in R/3

Any ideas on how to create a time dependent Hierarchy in R/3?
Do we have any existing functionality we can leverage in R/3 for creating and maintaing time dependent hierarchy or through ABAP coding in R/3?
Any ideas or documentation will be helpful.

Hi Jasmine,
check this documents/links to get an idea how to set up hierarchy extractor in R/3
[How to Create a Hierarchy Extractor for Employees and their Department Managers|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20a709c1-0a8e-2a10-21b4-f779728c63bf]
Re: Build Hierarchy with ABAP
How to create datasource for hierarchy
Double post: Creation of Time Dependent Hierarchy in R/3
Regards
Andreas

Need to get the exact time of each picture that I saved ( maybe as a excel sheet or word )

Hi guys,
I am actually a new labview user. I have successfullly been able to save pictures. But unfortunately I got two problems. The first one is that I need to use two cameras at the same time. The program I have so far is for one camera. The second problem is that I need to get the exact time for each picture saved in the profile.
I would appreciate if someone can help me with that. Anyway plz find attached the subvi.
Regards,
Abbas
Attachments:
Abbas progress.vi ‏54 KB

Hi Abbas,
First, I notice that you are using IMAQ for USB. Is there any particular reason you are not using IMAQdx? This is the newer, supported driver for use with USB cameras that supports acquiring from multiple cameras at the same time.
Check these two articles:
Can I Acquire from Multiple USB Cameras Simultaneously Using IMAQdx?
Can I Acquire from Two USB Cameras Simultaneously with NI-IMAQ for USB Cameras 1.0?
And also this example (if you camera does not support acquiring from multiple cameras at the same time):
Toggle Between Multiple USB Cameras
As for timestamps, some cameras output them with the frame timing. However, usually this is not a feature of USB cameras; if it is not, you can look into timing options within LabVIEW. Try playing with the property node for IMAQdx and the Acquisition Attributes.
Cheers,
Marti C
Applications Engineer
National Instruments
NI Medical

How to determine the creation date/time for a file?

The important operating systems maintain both a creation date/time and last modified date/time for files. But in the File class there is only a lastModified() method. How does one determine the creation date/time for a file?

As far as i know, there is no way to know creation time, since it is a OS dependant information.

What exact time is the ipad mini preorder begin?

What exact time is the ipad mini preorder begin? Been waiting here and really want to know when it releases.....

It will be interesting to see how we'll it sells considering its premium price and size. If it sells well then Apple marketing did their homework.

Find exact time a database was recovered to

Oracle 11gR1
How can I find out the exact time a database was recovered to, assuming I do not know what value was used in the "SET UNTIL TIME" clause?

>Will the resetlogs time show the time I issued the "alter database open resetlogs" command at or will it show the time that the database was actually recovered to
The RESETLOGS_TIME in V$DATABASE shows when the ALTER DATABASE OPEN RESETLOGS was issued.
It does NOT show the time the database was recovered to.
Thus, today, 14-Jun I restore a database backup of 11-Jun and do an Incomplete Recovery to 12-Jun. My SET UNTIL TIME was 12-Jun.
V$DATABASE.RESETLOGS_TIME shows 14-Jun.
The only way to know the time the database was recovered to is to query a table which you know holds transaction timestamps and would have had a transactions just at or before the SET UNTIL TIME. (e.g. an audit table ?)
Hemant K Chitale

Help--how to check the exact time?

Pls help me:
How to check the accurate down-time when the Sun machine (with solaris 8 sparc) abnomally shutdown (eg. power failure)?
or
Is there any way to detect the exact time when I shutdown the Sun machine ?
thanks.

check /var/adm/messages ; uptime ; last ..
there are quite a few method u can use

Exact time of SQL query execution.

Hi,
Is there any way to get the exact time of execution of particular SQL query.
Oracle Version : 10.2.0.4.0
OS : Sun OS.
Thx,
Gowin.

In general it's pretty hard.
Look at V$SQLSTAT.ELAPSED_TIME and DBA_HIST_SQLSTAT.ELAPSED_TIME_TOTAL/DELTA (need a license).
It will give you accurate results for a non-parallel query. For parallel queries you'll get a total time spent by all slaves.
Also you can enable tracing either on database or session level and analyze the trace files generated.
Edited by: Max Seleznev on Nov 4, 2011 12:06 PM

How to find the exact time backup run

Hi,
I would like to know the specific date ( hour + minute) a backup was executed.
For example the output of rman command : list backup of database;
show Completion Time : 08-MAY-12 . I would like to get the exact time .
Please advice.
BS Key Type LV Size       Device Type Elapsed Time Completion Time
33627   Incr 1 256.00K    SBT_TAPE    00:00:05     08-MAY-12    <<<<<<======
        BP Key: 33994   Status: AVAILABLE Compressed: NO Tag: TAG20120507T230332
        Handle: bzq1<bzq1_inc_889661:782699508:1>.dbf   Media:
List of Datafiles in backup set 33627
File LV Type Ckp SCN    Ckp Time Name
279 1 Incr 8042759810240 08-MAY-12 /bzq1/oracalls_2011_data2/y0211pricing_internet04.dbf
.....Thanks

I took level 0 rman database backup.
The problem is that there are also level 1 backup which seems to be run at the very same time.
For eample :
BS Key Type LV Size       Device Type Elapsed Time Completion Time
31891   Incr 1 3.00M      SBT_TAPE    00:01:25     07-MAY-12                               <<<<<=== level 1
        BP Key: 32278   Status: AVAILABLE Compressed: NO Tag: TAG20120507T230332
        Handle: bzq1<bzq1_inc_889062:782696160:1>.dbf   Media:
List of Datafiles in backup set 31891
File LV Type Ckp SCN    Ckp Time Name
103 1 Incr 8042758295621 07-MAY-12 /bzq1/oradata3/data06_ts_17.dbf
BS Key Type LV Size       Device Type Elapsed Time Completion Time
31892   Incr 0 1.18G      SBT_TAPE    00:00:34     07-MAY-12                                        <<<<<=== level 0
        BP Key: 32279   Status: AVAILABLE Compressed: NO Tag: TAG20120507T200203
        Handle: bzq1_full<bzq1_889069:782696225:1>.dbf   Media:
List of Datafiles in backup set 31892
File LV Type Ckp SCN    Ckp Time Name
528 0 Incr 8042758303427 07-MAY-12 /bzq1/oracalls_2011_data3/q311_calls_ts_10.dbf
BS Key Type LV Size       Device Type Elapsed Time Completion Time
31893   Incr 1 256.00K    SBT_TAPE    00:01:24     07-MAY-12                                              <<<<<=== level 1
        BP Key: 32280   Status: AVAILABLE Compressed: NO Tag: TAG20120507T230332
        Handle: bzq1<bzq1_inc_889065:782696196:1>.dbf   Media:
List of Datafiles in backup set 31893
File LV Type Ckp SCN    Ckp Time Name
154 1 Incr 8042758299495 07-MAY-12 /bzq1/oradata5/tc_deb_cred_tb_11.dbf
BS Key Type LV Size       Device Type Elapsed Time Completion Time
31894   Incr 0 1.36G      SBT_TAPE    00:01:55     07-MAY-12                                                    <<<<<=== level 0
        BP Key: 32281   Status: AVAILABLE Compressed: NO Tag: TAG20120507T200203
        Handle: bzq1_full<bzq1_889064:782696169:1>.dbf   Media:
List of Datafiles in backup set 31894
File LV Type Ckp SCN    Ckp Time Name
576 0 Incr 8042758296792 07-MAY-12 /bzq1/oracalls_2012_indx1/Q112_icalls_ts_07.dbf

How to find out the exact time in UK with daylight savings.

Hi,
how can i get the exact time in UK even if the daylight savings time is implemented in UK..,
now my code is implemented for IST ,how can i get the BST timings?
Thankx.

the setTimeZone method of SimpleDateFormat (actually inherited from DateFormat). Use it to set it to your timezone when parsing or formatting a date string for your timezone and set it to the UK timezone when parsing or formatting a date string for their timezone.
Edit: IOW SimpleDateFormat was the answer, not a question.

Finding exact time for table drop

Hi,
yesterday i dropped one of the important table ...i have rman backup...i want to use until time incomplete recovery method.. but i dont know the exact time of table dropped ..i tried alert and trace files ..but no use...
is their any method to find out the exact time of table dropped..
Oracle 9.2
Redhat 5.3
Thank u
selva..

So the database is not in ARCHIVELOG mode?
If you don't have the redo from the time in question, you haven't enabled auditing of DDL operations like DROP, and you don't have a DDL trigger that would have recorded the time of the drop, you're probably out of luck. Oracle won't have that information. You'll have to take your best guess.
If you were on a more recent version of Oracle, the dropped table would be in the recycle bin. But that wasn't available back in the 9.2 days.
Justin

Assigning an exact time to poll data using JDBC Sender?

Hi,
Can I set an exact time to poll data from DB table?
I means, I want to poll data every 6 pm.
But I cannot find fields to set starting time.
There exist only poll interval fields in JDBC Sender.
Regards,
hiyoung.

Hi,
This might help you out.
To run a scenario exactly once in a specific time every day / schedule a adapter
Note:You will need to have the authorizations of the user group SAP_XI_ADMINISTRATOR with the role modify.
Go to Runtime Workbench -> Component Monitoring -> Communication Channel Monitoring
Locate the link Availability Time Planning on the top right corner of your Communication Channel Monitoring page.
In your case, the requirement is to schedule the Sender file adapter daily once at 12:00 at midnight.
In Availability Time Planning, choose the Availability time as daily and say create.
Provide the details like the time 12:00
Then select the communication channel , goto the Communication Channels tab and filter and add the respective channel (File Sender).
Once all the above has been done 'Save' the changes.
<b>Cheers
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

Finding exact time for sequence change

Hi,
for incomplete recovery purpose , i want to know the exact timing of sequence number change or SCN change...i tried some of the views like v$loghist, V$log_history..provide only date ..these didnt provide exact time...
SQL> select * from v$loghist;
THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM SWITCH_CHANGE#
1 1 944409 31-MAY-09 945995
1 2 945995 31-MAY-09 947470
Oracle 9.3
Redhat 5.3
Thank u
selva..

Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
SQL> alter session set nls_date_format='dd.mm.yyyy hh24:mi:ss';
Session altered.
SQL> select * from v$loghist where rownum < 10;
   THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIME          SWITCH_CHANGE#
         1       2035     760254081 28.04.2009 00:45:41      760391689
         1       2036     760391689 28.04.2009 06:30:44      760479542
         1       2037     760479542 28.04.2009 10:18:58      760566251
         1       2038     760566251 28.04.2009 11:18:23      760686034
         1       2039     760686034 28.04.2009 11:33:20      760802082
         1       2040     760802082 28.04.2009 12:00:44      760916445
         1       2041     760916445 28.04.2009 12:18:07      761027875
         1       2042     761027875 28.04.2009 12:33:28      761147250
         1       2043     761147250 28.04.2009 12:49:01      761262830
9 rows selected.

PO creation exact time

Similar Messages

Maybe you are looking for