PO - Decimal Places

HI,
Can we raise Purchase orders in decimal places ? If Yes how digits are allowed.
Thanks & Regards,
Mani.

Hi
U can set the decimal place in CUNI .
Then while create PO. it will allow.
SAM

Similar Messages

  • Error while updating decimal places in general settings

    Hii All
             I have got an error while updating Decimal places in General Settings
    Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
    Note : there are no postings yet, a fresh database for a new client
             what could be the possible reason
                                                                 thanks
                                                                         RIYAZ

    Hiii All
          As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
              would be helpfull if there is any other way..
                                                Thanks
                                                         RIYAZ

  • Decimal places in report painter

    Hi experts.  I have a financial report written in report painter.  I want to show two decimal places on a single row.  The rest of the report is in whole dollars, but this one row is a percentage, so I want to show decimal places.  I know that you can format an entire column, but I can't figure out how to format a single row.  Can anyone help?
    Thanks
    Janet

    YES U CAN
    SAME AS ABOVE PROCEDURE
    BUT SELECT ROW INSTEAD OF COLUMN
    Edited by: Anil Kumar Potnuru on Feb 10, 2009 9:02 PM

  • Can not change the number of decimal places in the normalization of result

    dear all
        i want to see the proportion of some data, for example, the income of May is 300, and the total income is 1000, i need to display it like 33.33% . so i set the
    Calculate single values as normalization of result, and then it display 33.333%, i like to display only two number of decimal places, so i set the number of decimal places as 0.00, but i doesn't work, it still display three decimal numbers.
        maybe you say i can use the percentage function like %CT %GT %RT, but i need to allow external access to my query, so the i can not use those functions.
        can somebody helps me ? your advice is appreciated.

    hi,thanks for your advice, but that doesn't suit for my problem.
    before i set the normalization of result, i can change the decimal values. After that i cann't.
    In your thread, someone proposes use the T-code OY04. but this wouldn't help. As i change to other key figure, such as user quantity, when i set normalization of result, it still display 3 decimal values.
    i think the point maybe lie in the normalization of result. please advise... thanks...

  • Problems with decimal places and formatting

    Hi , we are having problems with an add on running on different localization companies. Decimal places separatd by "," differ from other localizations. We dont know if this is a SQL collation setting or somethng related to code or requirements to run add ons on different servers and languages.
    Any ideas??
    Thanks

    Hello
    Follow up with this thread:
    [Re: How to get the numeric value of DocTotal from UI API]
    Regards,
    J.

  • Decimal Places in Item Cost must be 6 characters while in Journal Entry 2.

    I have the following problem:
    Accounting needs to see and work with 2 decimal places, but the item cost is needed in 6 decimals.
    If I register a A/P Invoice and i go to the Journal Remark, the Journal Entry should be in 2 decimals. If i look for the Item Cost on the Wharehouse this cost should be in 6 decimals.
    Is there a way to handle Accounting in 2 units and Cost in 6 Units
    Thank You very much

    Hi Saul,
    The request appears illogical, how can the accountant work with 2 decimal places & the item valuation is held with 6? The stock account with 2 decimals will never match the stock audit report with 6 decimals.
    I'm afraid the SAP Business One core functionality does not cater for this need. There are no 'behind the scenes' journal entries. A JE is legally binding so you need to decide whether you wish to work with the most accurate calculations regarding item cost as possible (6 decimals) or accommodate the accountants & work with 2 decimals in the journals.
    You might want to take the nature of the stock into consideration, if there are huge quantities at small individual prices 6 decimals might be better, if you use mainly standard cost &/or have no major cost fluctuations when using MAP/FIFO, 2 decimals might be sufficient.
    All the best,
    Kerstin

  • Decimal places in standard input schedule templates

    Hi Gurus
    I have created some input schedules using standard template. User here will be entering some values in 2 decimal places (like 1.25) but when I enter any values in the cells, it automatically round off the values and displays values without any decimal places.
    I have tried changing the formats in Format control panel by changing the DATA / DEFAULT 's PATTERN / ALL for ROWs but it did not help.
    Please help how to resolve this.
    Cheers
    Swathi

    Hi nilanjan,
    Thanku, I resolved the issue using Format Range option with the below code
    CRITERIA    EVALUATE IN  FORMAT     USE     PARAMETERS    APPLY TO
    INPUT          ROW                1234,56      ALL                --                   DATA
    Thanku

  • DIsplaying WRBTR (AMOUNT FIELD)WITHOUT  DECIMAL PLACES

    Dear all,
    I am facing a problem in displaying amount field  in alv report. I have two currency keys (US dollar and Japan yen). if it is japan yen I should not have to show decimal places and if it is US dollar I should show decimal places.
    How can I do it in a alv report if I have only one output amount field?
    thanks
    Ranjan.

    Hi chittaramjan,
    1. use this kind of funda (just copy paste in new program)
    Important things
    a) one extra field in internal table
      declared in the same exact fashion
    waers LIKE tcurc-waers,
    b) Populate this field
    c) REST THE System will take care
       (based upon country settings)
    2.
    REPORT abc.
    TYPE-POOLS : slis.
    DATA : alvfc TYPE slis_t_fieldcat_alv.
    DATA  : BEGIN OF itab OCCURS 0,
            f1  LIKE P0008-BET01,
            waers LIKE tcurc-waers,
            END OF itab.
    START-OF-SELECTION.
      itab-f1 = '-4.15'.
      itab-waers = 'KRW'.
      APPEND itab.
      itab-f1 = '4.68'.
      itab-waers = 'GBP'.
      APPEND itab.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name     = sy-repid
          i_internal_tabname = 'ITAB'
          i_inclname         = sy-repid
        CHANGING
          ct_fieldcat        = alvfc.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          i_callback_program      = sy-repid
          it_fieldcat             = alvfc
        TABLES
          t_outtab                = itab
        EXCEPTIONS
          OTHERS                  = 2.
    regards,
    amit m

  • Key figure, number of decimal places are not showing in report output

    Dear experts,
    At cube level PO qty value is getting 0.010 where as in bex report output of PO qty showing as 0. I have chosen decimal places as 0.000 in key figure additional properties tab. In query designer also I have chosen no of decimal places as 0.000 in display propertiesu2026please help me out. How can I get 0.010 value in report o/p.
    Thanks in advance.
    Srivalli.

    Hi,
    Try to run the query in RSRT. CHeck if you are getting the same output. Also make sure that in the reports all the filters are same as you have applied in the info -cube to see the data.
    - Jaimin

  • PO print preview displays incorrect setting in decimal places

    Dear Experts
    Please help me on the following condition.
    I have a problem in print preview of a PO. It displays the incorrect setting for decimal place in currency.
    It shows USD 1.404,00 whereby the amount should be USD 1,404.00
    This only happens to a certain vendor that is doing PO for the first time from that country
    Example:
    I'm creating a PO for vendor 123. Vendor 123 is located in country A. No PO has been created for any
    vendor in country A before. When I saved my PO, in print preview, the decimal setting is not correct.
    But when I'm creating another PO, for vendor 234. Vendor 234 is located in country B. There have been
    several POs created for vendors in country B before. When I saved my PO, in print preview, the decimal
    setting is correct.
    Both vendor 123 and vendor 234 is using currency of USD.
    Is there any other setting with the vendor master in regard with the currency decimal setting for each
    country for the vendor? Or something that I've missed out?
    Diagnosis:
    I've checked with the user profiles->default-> decimal notation. It displays 1,234,567.89 correctly
    I've also run OY04, but the decimal setting is correct.
    Thank you
    Regards
    Syukri

    this has nothing to do with print preview, it is just basic country setting (OY01) how a quantity and value is written on a PO to a vendor is country xyz.
    German uses to comma to seperate decimals, while USA uses the point to seperate decimals
    this would be the German version 1.404,00, and this the US version:: 1,404.00
    so if an American sends a PO to a German vendor, then the document will show 1.404,00 so that the German can understand that he wants 1404. (and not 1000 times less)

  • U261B An Issue due to 3 Decimal Places in Percentage - Help Required

    I've an Issue in BEX report output, which is like when I try to create a 'Percentage' computation on a Key Figure Value, I'm getting 3 decimal places as 'default' output.
    The 'Calculations' settings I made for this KF is
    > Calculate Result as ... Nothing Defined
    > Calculate Single Values as .... Normalize According to Next Group Level Result
    > [✔] Apply to results
    > Calculation Direction - Along Rows
    ☹  I ran SAP_RSADMIN_MAINTAIN and set object 'IGNORE_T006_ANDEC' to the value 'X' - Not woking! Should I choose Update/Insert/Delete??
    ☹  T006-ANDEC & T006-DECAN for '%' has 0 decimal places only. Am I checking the correct stuff?
    ☹  OSS note 866505 not helpful for my issue. BW 7.0 Stack
    I'm getting my output as expected, but the only worrying factor is 3 decimal places due to the 'Calculations'. I'm unable to resolve using existing methods. Should I raise an OSS Note for this?
    Please help...

    Hi, I posted a message to SAP on this topic and got an explanation - it is a behaviour that cannot be changed in certain cases:
    it is the known design that it is always displayed with three decimal
    places for normalized values and the setting in Query Designer for
    decimal place doesn't take effect. This is because that normalization
    changes the number dimension of this structure element.
    You may refer to below notes about more details.
    > 869135 Decimal places and scaling for "Calculate Single Values As"
    You cannot set the number of decimal places or the scaling for some
    columns or structural components.
    For 2: Some "Calculate As" functions change the number dimension of a
    KID. In this case, the scaling and the number of decimal places set for
    the KID are no longer relevant. In this case, the system ignores the
    original setting and selects a setting that corresponds to the new
    number dimension. This cannot be overwritten. The following functions
    are affected:
    Calculate Single Values as Scale to Result, Overall Result or Query
    Result: Scaling 1 and three decimal places.
    > 501930 Number of decimal places setting is not applied
    As a result, normalized values resulting from the list calculation are
    displayed with three decimal places and without scaling by default.
    best regards, thom

  • Display amount in ALV Grid with different Decimal Places based on Currency

    HI Experts,
    Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2.
    we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
    im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
    AED---22.56
    KWD---225.65
    i need to display values like AED : 22.56

    HI Experts,
    Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2. we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
    im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
    AED---22.56
    KWD---225.65 (converting this value to 22.565 using BAPI_CURRENCY_GETDECIMALS according to currency in my Report)
    i need to display values like AED : 22.56
                                             KWD---22.565 but here field is NETWR with 2 decimal.
    Need to Display amount in ALV Grid with different Decimal Places based on Currency
    Regards,
    Dileep Kumar Reddy

  • How to get the number of decimal places configured for a site column

    Hi,
    I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
    The column conatins a value, but when retrieved programatically is displayed as 5.00000000  instead of 5.00.
    I am retrieving this column using listitem.Properties[field.InternalName].
    I need to trim the decimals based on  number of decimal places configured for the site column.
    How to get the number of decimal places configured for a site column?
    Thanks in advance,
    dhijit

    Get the field as SPFieldNumber and then check DisplayFormat which returns
    SPNumberFormatTypes
    SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
    SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

  • Decimal places in Query generator

    Hi All,
    I am observing a weird behavior in Query generator's execution of a simple sql query. the query is :
    Select 0.002834
    now, in the general settings - display - amounts , I put the decimal value as 4 or 6,  then only it prints 0.0028 or 0.002834.
    else it prints 0.00 (if the decimal place is 2). it should ideally have nothing to do with the display of amount. any idea?
    (the effect is shown only after you change the decimal display, update it and close and reopen the SAP application.
    Thanks,
    Binita
    Edited by: Binita  Joshi on Apr 12, 2010 4:03 PM

    Hello Binita,
    >I have tried converting it to numeric(19,4) and numeric(19,6) but still the result was same.
    Check your decimal places settings in
    \Administration\System Initialization\General Settings\Display tab
    Check the following values:
    - Units (For meaurement)
    - Decimals in Query
    Now let' s say,
    - Unit set to 6 decimal places
    - Decimals in Query set to 2
    run the following query in query generator:
    select cast(0.000245 as decimal(19,6))
    result will be
    0.00
    run the same query as FMS on item master data in any measurement field (lenght)
    select cast(0.000245 as decimal(19,6))
    result will be
    0.000245
    Now set the - Decimals in Query set to 6 on  \Administration\System Initialization\General Settings\Display tab
    run the following query in query generator:
    select cast(0.000245 as decimal(19,6))
    result will be
    0.000245
    This is a normal habit of SAP B1 rounding engine / displaying engine.
    Regards
    J.

  • Problem while changing decimal places in SAP B1 2007

    Hi Experts,
    I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
    Please help me if you have any solution on this issue..
    Thanking you in advance

    Paul,
    Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
    Eddy

  • Cannot Update Decimal Places in General Settings

    When I try to update the decimal points in the Administration > System Initialization > General Settings > Display path, SAP B1 gives me the following error:
    "Cannot update while another user is connected to the company."
    I am the only one on the system as "manager" with "Super User" and "Full Authorization"...
    The SAP B1 Guide titled "How to Make Initial Setting in Business One - US" says "you can change these settings at any time".
    QUESTION:  What might be stopping this change, and more importantly, how do I get around this error to be able to change the decimal points?
    Thanks all - Zal

    Hi Zal,
    I agree with you about the strange messaging used by SAP.
    But blocking the possibility to decrease the decimal places is extremely important.
    Suppose you have inserted a sales document with two items in this way:
    Item 1 ___Qty 1,234  ___Unit price 1,22  ___Line total  1,51
    Item 2 ___Qty  5,756 ___Unit price 3,15  ___Line total 18,13
    ____Document total 19,64
    Then, someone wants to change the number of decimal places of the quantity from 3 to 2.
    What happens would be:
    Item 1 ___Qty 1,23  ___Unit price 1,22  ___Line total  1,51
    Item 2 ___Qty  5,75 ___Unit price 3,15  ___Line total 18,13
    ____Document total 19,64
    If you try to do the calculations manually you will see that the results are not correct. In fact all the document would have to change in:
    Item 1 ___Qty 1,23  ___Unit price 1,22  ___Line total  1,50
    Item 2 ___Qty  5,75 ___Unit price 3,15  ___Line total 18,11
    ____Document total 19,61
    Also if the document total will show correct (in the case of rounding the second decimal position of item 2), the totals of any line is wrong. In fact there is no recalculation at all in SAP (and must not be done).
    Imagine such a modification over thousand of documents and all of the descendants (mainly if the have lead to printouts - as say confirmations - sent to customers or vendors).
    None of the economic figures will match.
    BR
    Antonio

Maybe you are looking for

  • Getting back phone number

    Verizon just took my wireless phone number away from me (my actual carrier is Straighttalk), during approximately 6 hours between my Straighttalk's monthly plan ended and when I went to reactivate my number. I've had the number for 10 years ... start

  • Replace mode not functioning?

    For some reason, replace mode is not "replacing" old audio on any given track. This used to work for me all of the time. Typically I would set up an autodrop zone, place the SPL before it, and put the transport into replace mode. Once I hit record th

  • Database creation in oracle 8.0.4

    Hi, I'm creating a database in Oracle 8.0.4. I choose the custom option to give all the parameters. One of these parameters is the password of internal user. I give it as oracle. After giving all the other parameters and then click on finish to creat

  • Can you overlay type on a photo in pages

    Can you overlay type on a photo in pages? thanks!

  • How much to cancel plan? I have two lines

    My two years is coming up in Jan. when I opened the account I opened two lines. For my mother and myself. I'd like to cancel it early and surprise her for Christmas with a new phone on Sprint or AT&T. Is the cancellation fee for each line? Or all tog