PO Doc Error on Header Tab

A new tab has been added in the hdr of the PO doc.
1 How do I get the error to appear when you press enter? (error does appear when you do a check)
2 If you do a check and the error appears in the poupuscreen, if you select the error and press edit,how do I leaf to the new tab so the error can be corrected?

Have you got the answer,
Please share

Similar Messages

VF02 how to change Posting status on header tab

how can i change posting status in vf02. I have changed billing date from last month to current month. On the header tab there is posting block ( it its greayed out righ now ) - Error in Accounting interface. How can i remove that ?
Vanbills.

Hi,
1. Check Your Customer master xd02 - Sales area Data - Billing tab - Account Assighment group of Customer
2. Cechk your Material master mm02 - Sales Org2 - Account assighment group of Material
3. Check you Biling document vf02 - Header - header - Accounting data - Account Assighment group (Customer)
Item - Item detail - Accounting - Account Assighment group (Material)
4. Check Account determination -VKOA - Proper G/L Account maintained or not if not then try to correct them
5. After correcting all the above steps Goto Vf02 enter Billing doc. No. then click on Realse to Accounting or Press Shift + F4
Regards,
MH,

0DOC_CATEGR-Sales Document Category of Reference Doc. in Order Header

Hi,
I am extracting the standard datasource for Sales Order Header 2Lis_11_VAHDR to BW.I am getting error while loading data.I checked it in PSA there are around 30 records which were showing the error with the message
"Record 985 :Contents M from field VGTYP_AK(mapped to 0DOC_CATEGR) cannot be converted in type DEC ->longtext RSAR 198" and
"Error in an arithmetic operation in record 985 RSAR117".
I am not getting this error while loading the Order Item Data.
'M' is the Document Category of Reference Doc. in Order Header.For sales document type "RE".
In R/3 the reference was taken on Inv.No instead of Order number and also there is a User Exit written on MV45AFZZ program to check the referred quantities and also zero quantiity lines in case of back split.
As there is no customization done in BW and the only customization was in terms of an User Exit in R/3 please let me know what is the reason of this error.
Thanks in advance.
Venkat

Hi Venkat,
Assume the data mapping in transfer rule and update rule is correct
Maybe you can check the info object definition of 0DOC_CATEGR in your system. Based on the error message you mentioned below, it looks like 'data type' of the object concerned is NUMC? In our system it is CHAR (standard BC)...
Regards,
Lilly

Error in header detail, Can not solve the error

Hi All,
I'm new comer in SDN and also for SAP.
I had a problem in CRM Complaint.
When I tried to create a follow-up documents, it is prohibited if above 1000 USD.
And the error arose : "Header Error : Cannot Proceed"
After that, the error still there in the document. Nothing I can do to fix the error.
Is anybody can help me to solve this problem?
Coz when the complaint containes error and after the last status Settlement Process, I can't create Credit Memo Request.
TIA
Robin

Hi
Robin either your user id is not permmitted for creating followup docs or problem in Action profiles Settings , work flow , so rise a request so that you can configure according to .if you are authorised to create follow up they will give access to u r user id
Regards
Venkat

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?
Just bought the perpetual license online - student-teacher version. Received email confirming my eligibility and followed all instructions to a 't', but still got this 413 error message, and cannot continue.
Would anyone be able to help me?
Or how can I get in touch with Adobe themselves?
How do you get to the chat? I bought it with their help, but cannot remember how to get there again. Took me ages to find the chat.
Cheers!!! Thanks a million! Any help is welcome!!!!

Make sure you have cookies enabled and clear your browser's cache before you try downloading. If it continues to present that error try using a different browser.
As far as getting to a chat link goes, it can be hit or miss... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

Loans document error Document header does not have a reconciliation key

Hi All,
I am trying to post a loans document through EK25 and while saving the document following erros is coming
Formal error: Document header does not have a reconciliation key
Message no. >0037
Diagnosis
You tried to post a document but a reconciliation key is missing from the document header. Since mass processing does not apply here (where the reconciliation key is automatically created) you must enter a reconciliation key.
System Response
Error message. Processing is terminated.
Procedure
Contact your system administrator.
Procedure for System Administration
If the program error occurred in an
SAP standard program, enter a problem message
Own program, correct the program
Any input appreciated.
Thanks,
VR

Hi,
You need to assign the reconcilation group to the SAP user ID you are using to post the loan document.
The reconciliation group is required if user-specific reconciliation keys are to be proposed automatically.
The reconciliation group is freely selectable.
Go to the following path in IMG-
IMG->Financial Accounting->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document-.Define Default Values->Maintain Rules for Reconciliation Key Default Values->Maintain Reconciliation Groups for Default Values
Maintain the SAP User ID that you are using along with a reconciliation group.
After, you maintained the user ID and saved it, try to post the loan document again.
Hope it helps..
Thanks,
Amlan

Trying to download CS6 on my mac pro. when i click on Download, under my orders, it brings up an error page: JRun Servlet error, 413 Header Length to Large. It's been doing this each time I've tried that last few days. What can I do to download this?

Trying to download CS6 on my mac pro. when i click on Download, under my orders, it brings up an error page: JRun Servlet error, 413 Header Length to Large. It's been doing this each time I've tried that last few days. What can I do to download this?

clear your adobe.com cookies or use a different browser.

Error : Transaction header and line tables cannot be empty

please can some one help me.
when i want to create an invoice without anuy line, i have the error : Transaction header and line tables cannot be empty .
can some one tell me how can i solve this
regards.

Hi,
I really don't know if it is possible to create an invoice in AR with no transaction lines. When I interface invoices from another system to AR (and there is no need to detail inventory items), I use a single line with a dummy inventory item or with no inventory item (inventory_item_id and warehouse_id set to null) in transaction lines, and I use the description field to describe the link to the other software in a user-friendly way.
Regards,
Ketter Ohnes
Message was edited by:
Ketter Ohnes

Reg: Additional header tab strip in MIGO Transaction

Hi Experts,
I have added a new header tab strip in MIGO transaction. The tab strip is triggered using the BADI 'MB_MIGO_BADI' (PBO_HEADER method), I populated a selection screen using module pool program through the same BADI. Now i need to update the values in the selection screen fields to the data base table MKPF. I need a solution for update the screen field values to the data base table MKPF. Whether some other BADI i need to use? if yes how can i pass the screen field values to that BADI.
Please guide me.
Thanks
Vijay.R

Hi,
You may also try the exits available with the MIGO transaction. To find exits you can use the fillowing code by giving tranasaction code as input.
REPORT zrmexitfinder                               .
TABLES: modsap, modact, tstc.
PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
            input2 LIKE modsap-typ DEFAULT ' '.
DATA: search1(6),
      search2(3),
      search3 LIKE modsap-member.
DATA : first_row VALUE 'Y'.
CONCATENATE: '%' input1 '%' INTO search1,
'%' input2 INTO search2.
SELECT * FROM tstc WHERE tcode LIKE search1.
first_row = 'Y'.
CHECK tstc-pgmna NE space.
CONCATENATE '%' tstc-pgmna '%' INTO search3.
SELECT * FROM modsap WHERE typ LIKE search2
AND member LIKE search3.
    SELECT SINGLE * FROM modact WHERE member = modsap-name.
    IF first_row EQ 'Y'.
      WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
             45 modsap-member, 70 modact-name.
      first_row = 'N'.
    ELSE.
      WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
    ENDIF.
    CLEAR : modsap, modact.
ENDSELECT.
IF sy-subrc NE 0.
    WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
ENDIF.
CLEAR tstc.
ENDSELECT.
END-OF-SELECTION.
CLEAR: search1, search2, search3.
Regards,
Renjith Michael.

Error viewing variables tab after running edit UI

Hi,
I have a problem that seems to be somewhat like this:
http://forums.ni.com/t5/NI-TestStand/Error-viewing-variables-tab-in-Runtime-Operator-Interface/m-p/1...
The VI I am trying to run is an edit substep of a step type. LabVIEW checks to see if the "Step.Setup.ReadMeasName" property exists, populates a listbox with it if it does. Another listbox with all the available measurement names also appears on the UI. The user has an Add and Remove button to remove measurements from the "ReadMeas" listbox or add them to it from the "MeasNames" listbox. Multiple names can be added/removed at once depending on whats selected when the buttons are pressed. Once "Done" is clicked the VI writes the"ItemNames" property of the "ReadMeas" listbox to "Step.Setup.ReadMeasName", using a Set Property Value node which is passed the TestStand Sequence Context. If the property doesn't exist it creates it.
The only time I have any problem is when I try to remove items from the property after it is already initialized (i.e. not empty). In other words, if I run the VI from teststand, put several measurement names into "ReadMeas" click done, run the VI again (the names already added appear in the box when the UI comes up, LabVIEW reads "Step.Setup.ReadMeasName" ), and then remove some of the names. IF I had "ThisContext.Step.Setup.ReadMeasNames" opened in the step "Variables" tab when trying to remove the names this message appears in the Variables tab: "One or more errors have occurred. Please Save your work and restart the application." If I make sure not to have "ThisContext" expaded in the variables tab, but check the property before and after removing names from the list it does work properly and there is no error.
This isn't a big deal becuase I doubt the end-user will be checking to see that the property actually got populated, but I still would like to fix the bug if possible. I've installed the patch for TestStand 2010, and the .Net framwork 4.0. Anyone have any idea what could be going on here?
Thanks,
-Josh
Solved!
Go to Solution.

Josh -
It looks like you're running into a Known Issue 193751, which is documented in the TestStand 2010 and 2010 SP1 Known Issues List. This is an issue that we intend to fix in a future version of TestStand.
I hope this helps and am sorry for any inconvenience this issue may be causing you.
Manooch H.
National Instruments

Add Custom Header Tab to ME22N

Hi I want to add a Customer Header Tab to ME22n. For that I am using BADI : ME_GUI_PO_CUST . As I understand to publich the tab at header level all I have to do is implement method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE
i have implemented this method as mentioned below. However, the tab at header level is not displayed for some reason. Please advice
* we want to add a customer subscreen on the item detail tab
IF im_application = 'PO' AND im_element     = 'ITEM'.
* each line in re_subscribers generates a subscreen. We add one subscreen in this example
*    CLEAR re_subscribers[].
* the name is a unique identifier for the subscreen and defined in this class definition
   ls_subscriber-name = subscreen1.
* the dynpro number to use
   ls_subscriber-dynpro = '0101'.
* the program where the dynpro can be found
   ls_subscriber-program = 'SAPLYPDM_LINK'.
* each subscreen needs his own DDIC-Structure
   ls_subscriber-struct_name = 'YPDM_LINK_OBJCTS'.
* a label can be defined
   ls_subscriber-label = text-001.
* the position within the tabstrib can be defined
   ls_subscriber-position = 8.
* the height of the screen can be defined here. Currently we suport two screen sizes:
* value <= 7 a sevel line subscreen
* value > 7 a 16 line subscreen
   ls_subscriber-height = 16.
   APPEND ls_subscriber TO re_subscribers.
***to add Confirmations Tab to PO at Header level
ELSEIF im_application = 'PO' AND im_element = 'HEADER'.
     DATA: ls_next_subscribe LIKE LINE OF re_subscribers.
     CLEAR: re_subscribers.
     REFRESH: re_subscribers.
     ls_next_subscribe-name = subscreen2.
     ls_next_subscribe-dynpro = '9000'.
     ls_next_subscribe-program = 'SAPLZMM_PO_CONFIRMATIONS'.
     ls_next_subscribe-struct_name = 'YMM_CONFIRMATIONS'.
     ls_next_subscribe-label = text-002.
     ls_next_subscribe-position = 15.
     ls_next_subscribe-height = 16.
     APPEND ls_next_subscribe TO re_subscribers.
ENDIF.
In the code above the ITEM part was implemented by another developer and works fine. However the HEADER part I am implementing does not work. Structure YMM_CONFIRMATIONS is created in DDIC. Functional pool SAPLZMM_PO_CONFIRMATIONS also has been created with screen 9000 with just text on it for testing purposes. Please advice what else do I have to implemented to get the custom tab to be printed on Header level in enjoy transaction me22n.

Hi,
i had similer problem when adding custom fields in va01 traction in header level at Additional data B tab.
these subscreen are placed in subscreen containers.
and if you have more number of fields in subscreen some fields will not be displayed.
i solved the problem by increasing the size of subscreen container.
SAP NOTE NO. 302497 - Additional cust. fields not displayed in 'Additional data B'
this note say:
Enlarging the screen containers:
If there is insufficient space on the subscreens and you enlarge the
maintenance area, you must also adjust the lines and columns in the
subscreen containers.
You can do this using Transaction SE51 (Screen Painter).
1) In the initial screen, you must fill the following fields:
Program SAPMV45A
Screen number 4312 (or 4462)
2) Then activate the 'Attributes' selection field and choose
'Change'.
3) Adjust the size of the lines/columns in accordance with the
subscreen.
4) Check your changes, then save and activate the screen.
5) Exit the transaction.
NOTE : This is for VA01 transaction. for more details see the SAP NOTE NO. 302497

Error in Analyse Tab

Hi
I have received following error after analyse tab from db13
SAPDBA: Error - in analyzing index SAPR3.DSYAD~0
        of table DSYAD!
30.12.06 09:50     ORA-08100: index is not valid - see trace file for
                   diagnostics
Please suggest a solution.
Regards
Pankaj

Pankaj
This Error is very strange error, Have a look on trace file which is generated at user_dump_dest and alert<sid>.log file.
Reasons may be index might be corrupted or invalidated.Or may be due to block corruption.And there are some bugs on specific platforms for this error.
Try to drop and recreate index and analyze or better contact customer support with trace file.
Regards
Vinod

Error formatting Cross-Tab table

Hello!
My CR2008 reports include many cross-tab tables and till now, everything went smoothly.
...till I got the message "Error formatting Cross-Tab table" while viewing the print preview.
Technically the error comes up while clicking one of the groups itemized on the left.
The database hasn't changed. Besides it happened with two different reports associated with two different data bases.
Any idea ?
Any help would be appreciated as I've been lost for a while.
Thib'

Before I received your answer (thanks a million by the way), I have been installing/un-installing subreports in the main report 'til the 'Error formatting Cross-Tab table' stops.
The Error stopped occurring when I added a small Group Footer in the subreport : apparently the Error had begun when I had put it to a zero-height.
Having said that, an hour later and many changes here and there, I have just put a zero-height again and no Error anymore...
> Check in the main report design tab to see if the width of the subreport fits within the page of the main report.
> If it doesn't try shrinking the subreport to fit.
Within 'an hour later and many changes here and there', I did the opposite : I widened a subreport which did not fit in the main report. And the Error isn't raised anymore.
> What happens if you drill into the subreport?
You mean if I double-click the subreport to edit it ?
If that is your question, no Error has ever been raised in the subreport : always in the Preview tab of the Main Report.
Sorry for describing such an irrational behavior.
I will categorize my question as answered but if you have any idea, I'd be delighted : I feel like this can happen again and I'd be less under stress to know what detail/ 'parameter' makes CR raise this Error. But your hint about the subreport fitting or not within the main report might be a clue.
Thank you again
Thib'

Receiving an 'Error formatting cross-tab object' error when paging through preview

I have a report with two subreports in the group footer. One of the subreports contains a cross-tab report. When I preview the report as a whole, occasionally I get an error formatting cross-tab object and then no more pages of the report are displayed. If instead I choose to export the report to pdf, Crystal Reports crashes. Any ideas on what might be causing these problems?

Actually, you can search for them by entering the KBA number in the search box in the top right corner of this web page. KBA 1214209 comes up fine. KBA 1212875 does not, but it's not really applicable.
While we are at the search box, see if a search term like 'crystal cross tab' (or something like that) bring up other KBAs.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error:Administration header could not found for support message

Hi All,
we are creating the support message in CRMD_ORDER transaction. we are getting an error, "Administration header could not found for support message" while saving. And also it is coming out of the transaction.
The transaction type is SLFN.
Please advise.
Regards
kumar

Did you find the solution to this error? I am also getting this error and need to solve the same. Can you please help?

PO Doc Error on Header Tab

Similar Messages

Maybe you are looking for