PO is getting created and getting an error in the Message tab ME23N

HI everybody,
I am uploading the data and creating the PO through BAPI, and the PO is getting created. when i logged into ME23N and checking the PO it is everything fine without any error.
But when i click on the message button and checking the display PO output is giving an error message over as Incorrectly processed and when i check the processing log i am seeing the msg text as error in the address output.
and i checked the NACE transaction the output type is configured with program name, form routine name, form name and smartform name.
here in the form name and the smartform name which is present is having the different name and both are the smartforms only.
Can any one help me out in this issue how to resolve the error.
Thanks in advance

Hi,
Check the TNAPR Table by putting the Form Name / Program Name to find out the output type it is attached to.
Debug
The other method of checking is by setting up a break-point at smartform and manually entering a PO using the same upload data and try to save it. But this would not help you much. Because the root cause is the Determination of output type.
Thanks & Regards
Suresh Nair

Similar Messages

  • Where does the "Submit Form" button get created and how can I change the associated email address?

    I've created a pdf form using Adobe Live Cycle ES 8.2 and it has been working fine.  Now I need to change the email address it gets sent to when the user clicks on the "Submit Form" button.
    How can I change this email address?
    Thank you in advance

    Yes, that is correct.
    I did not manually add this button, so I am assuming it was somehow automatically created.
    It worked great up until now that I need to change the "To:" email address.
    I've look through the XML code associated this this email address and changed it every where I could find it, but it still hasn't changed my results.  So, I have no idea how to change this and as stated above, if I create a new form it automatically sets it up to be sent to the wrong email address.  Not sure why or how to change it?
    Let me know if you need further info to help me out.
    Thanks again

  • My shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

    my shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc    

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.

    I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.
    I can work the screen behind the message which stays in the centre of my screen.

    Windows version is...?
    What pages are giving you problems? [post links to same]
    Are you getting the script errors only when attempting to print or...?
    Has your printer's manufacturer confirmed that your currently installed printer software is IE11-compatible (yet)?
    ~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

  • I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date is created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    I have made a burn folder with photos exported from I-photo.  It now shows in information, that the date  created and modified is different from the original digitized date.  How can I get the original date to show in the info from Finder?

    The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
    Regards
    TD

  • Oct 22, 2013 11:58 PM downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guid

    Oct 22, 2013 11:58 PM 
    downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guidance.........running 10.8.5 til today................????????  Can run in safe boot, but what do i do now ???  thanks
    MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHz 

    Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
    SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

  • Downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'

    downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guidance.........thanx
    running 10.8.5 til today........................????????  Can run in safe boot, but what do i do now ???  thanks

    Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
    SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

  • Get date AND time to show in the menu bar

    What is that technique to get date AND time to show in the menu bar please?

    Install iStat Menu
    System Preferences -> iStat Menus -> Date & Time
    \[X] Show Date & Time
    Format .... \[Edit]
    (*) Custom (drag tokens to build a custom format)
    Drag a light blue token into the edit line below the token selections. If you want a space a colon a dash, etc... just type that character(s) before after draging a token into place.
    I created: 9:35 PM Sat 1-Aug-2009
    You can create anything you like in any order you like.
    The other alternative (if you happen to be a fan of the Unix strftime() function) would be to use the % formatting characters in the Expert time format expression box. Use the Terminal "man strftime" to find out all the available % formatting codes.
    But I think the Custom Drag & Drop section is the easiest to use.
    However, if this doesn't work for you, then I guess it is just a case of "Your Mileage May Vary".

  • Ctrl+S and file save just get ignored and I have to close the file to save docs

    I am using DW CS5.5.
    Ctrl+S and file>save just get ignored and I have to close the file to save docs.
    Any ideas? Thanks

    "If this configuration folder is the one in the Program Files hierarchy, you may have shot yourself in the foot.  Never mess with those."
    I had a neighbor one time who was annoyed that "that darn bolt on the bottom of my engine" kept scraping on the curb when he'd pull in or out of his driveway, so he ground it down till it was flat with the oil pan. It wasn't till about a year later when he took the car in to have the oil changed that he realized the error of his ways. Cost him $500 to have the pan pulled and replaced.
    If you don't know what it does, find out first or leave it alone.

  • Get-ADReplicationFailure and Get-ADReplicationUpToDatenessVectorTable

    Hi,
    Where does the Get-ADReplicationFailure and Get-ADReplicationUpToDatenessVectorTable cmdlets retrieve it`s data from?
    Lets start with Get-ADReplicationFailure: It shows 2 replication failures which is not current. Running the following in the same environment shows no errors:
    $dclist= get-addomaincontroller-filter *
    foreach($dc in$dclist) {
    repadmin /showrepl /csv | ConvertFrom-Csv
    Get-ADReplicationUpToDatenessVectorTable: This cmdlet returns a lot of Microsoft.ActiveDirectory.Management.ADReplicationUpToDatenessVectorTable objects. Many of them have old timestamps and
     no value for the Partner property:
    LastReplicationSuccess : 26.04.2010 21:01:02
    Partition              : DC=domain,DC=local
    PartitionGuid          : 7ddec540-31db-44d3-9ab5-d5adb479627e
    Partner                :
    PartnerInvocationId    : 0e2fbc85-8d50-4c30-ae65-27648a0888b9
    Server                 : dc01.domain.local
    UsnFilter              : 19853
    These are probably old domain controllers which is decomissioned years ago. Why does these show up? And where is the cmdlet getting this data from?
    The replication topology seems healthy using the legacy tools, but the new cmdlets isn`t giving the same impression.
    Some clarifications would be appreciated.

    Hi scripter42,
    The Get-ADReplicationFailure cmdlet returns all failures currently associated with a given domain controller or Active Directory Lightweight Directory Services (AD LDS) instance. The return object is of type ADReplicationFailure. This cmdlet returns the
    list of failures in the ADReplicationSummary object for a specific server.
    The ADReplicationUpToDatenessVectorTable displays the highest Update Sequence Number (USN) for the specified domain controller(s). This information shows how up-to-date a replica is with its replication partners.
    Regards,
    Lany Zhang

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

    I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

  • I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

    I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???

    i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
    APPLE need to do something here!!!!!!1

    Hi...
    Thanks for your repaly .
    and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing.

  • When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account

    When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account. Can anyone help with a solution?

    You haven't set up the SMTP (outgoing) mail server correctly. You probably didn't enter your user ID and password for the outgoing server. They are needed even though it says "optional".

Maybe you are looking for