PO line items are deleted but showing as commitment in S_ALR_87012999

Hello All,
in one PO all line items are deleted but still in "Report output for S_ALR_87012999 Orders: Actual/plan/commitment", it is showing commitment against the PR.
Any pointers on this will help
Thanks & Regards,
Prashant

Hi,
Report RKANBU01 resets commitments on orders and ranges of orders.
(please see the note 152571).
Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
(See Notes 100409 & 152571).
Report RKACOR04 corrects mistakes between total and line items in database tables.
(See notes 21649 & 152571).
regards
Waman

Similar Messages

  • 2LIS_02_ITM deleted line items are not reflected in BW

    Hi,
    Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
    I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
    In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
    If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
    I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
    Thanks

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • Line items are not showing in fbl1n/fk10n

    hello all,
    Again i needs your help. this time i am not able to see the line items in fbl1n and fk10n. system shows 360 line items are displayed but no line item are showing in screen.In fk10n i am just able to see the period wise balance. but line item not showing. this issue is only with my 5 vendor. in case of other vendor, i am able to see as i wish.
    please suggest me how to solve it.
    regards
    konishko

    Hi,
    check the Reconciliation of that vendor.for that recon account line display should be selected.
    For other vendors, reconciliation account is with line item display .selected. That might be the reason to show line items for remaining items.
    check GL master of Recon acccount.

  • The result list for activities is empty but items are coming but invisible.

    Hi ,
    The result list for activities is empty / blank - nothing shown at all. but the line items are coming but all are invisible.
    please guide me to find the root cause of this issue.
    Thanks,
    Prem.

    Hi Rene,
    When I am click on 'Search' , the view area is created but records are not being displayed. I checked in the background and data is being fetched.
    Moreover, When I am copying one line item(which is viewed blank after the search being performed but has data)  and after saving press 'previous' all the records are being displayed.
    Do you have any idea on this? Can you share your ID , I can mail you the screenshot .
    Thanks,
    Prem
    Edited by: prem kumar on Jun 7, 2010 1:17 PM

  • Sales order some line items are showing not relavant

    Hi SD Guys,
    In sales order some line items are showing not relavant.
    Why are they showing a status of not complete or "not relevant"?
    Thanks
    Sunny

    Hi sunny,
                     plz check the each line item in the sales order controls by the item category, so check the item category , depends on the item category, pricing,delivery and billing takes place.
    regards,
    ram.

  • Open Item and Line Items are not matching

    Hi Gurus,
    I ran the EFT for vendor #1600109 for payment on 10/18/07.  If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403). 
    When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403). 
    User wants the open item report should tally the line item display.
    I will assign good points.
    Thanks for your help
    Prashanth

    Hi Gurus,
    EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
    We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
    Clearning date is 18th
    Posting Date is 15th.
    Thanks
    Prashanth

  • Sales order line items delivery cancelled but still appears in MD04.

    Hi PP Gurus,
    In the sales there are 6 line items are there out of which for 1 line item delivery and PGI happened. And for remaining line items delivery got cancelled, but these line items for which delivery cancelled appearing in the MD04, I have rejected the sales order line items but these line items still shows in MD04. Please advise how to remove these line items from MD04.
    Thanks and Regards,
    SHARAN.

    Hi
    Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
    Regards
    Brahmaji

  • PO will not print if line items are trash-canned

    Hello, 
    We have an instance where we had to cancel both line items on a PO. However, the system will not allow a printout, since there are no line items.  How can we get a printout to send to the vendor to confirm that both line items are cancelled?  Config looks right.  Deletion is a change relevant field, but the system displays a message when trying to print 'no print relevant information changed'. 
    Please advise.
    Thank you.

    Yes. We get change messages when qty or delivery date is changed, but for some reason, when you delete all line items, it doesn't generate any change. The checkbox is not checked therefore we can't print. If only 1 item is deleted, then it's OK, but if you delete all items, no printout.

  • Bank line items are only permitted in one company code Error

    Hi Experts,
    While doing MIRO with retention money i get the following error
    "Bank line items are only permitted in one company code"
    The transaction i am trying is in only one company code. Also i refered the following links in SDN
    http://forums.sdn.sap.com/thread.jspa?threadID=2100162
    http://forums.sdn.sap.com/thread.jspa?threadID=2100332
    As per the first link i tried to apply the note 1548167 but it has dependancy to numerous notes including
    146691, 1469138, 1477908, 1226698 and so on
    This scenario was working earlier without these notes
    Please advice

    sir
    thanks for your reply. as per your suggestion i am trying to change in fs00 to uncheck the line item management but  i am unable to do that,system shows that i have to uncheck the open item managemt also but the said account contain the open item. so i am not able to change the same. is there any other way to do that. can you please suggest me in detail? and one more thing that i am able to see only the balaces in fs10n. but not able to see the line item.this is probably for missing the business area in line item.
    but i needs to see the line items.
    can you please tell me any alternate way in detail to solve this problem?
    thanks and regards
    konishko

  • FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

    Dear Expert
    FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

    Hi,
    It seems from the screen shot you are seeing different documents as in the first screen shot it clearly shows you have booked the multiple expenses under one see the below screen shot we have circled it
    whereas FB03 screen shows different.
    You can do one thing click on circle item and check the expenses involved in it and accordingly go to FBL3N and display documents for that G/L for the date 05.04.2014.
    Hope your issue has been resolved else revert.
    Regards,
    Tejas.

  • Line items are missing during transferring ITS to EBP--tricky problem

    Hi,
    We are using EBP 2.0 version.
    Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
    This is happening randomly.we had checked all the shoppping cart related tables in EBP.
    For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
    In account assignment table for this particular shopping cart only 3 items are updated except first one.
    This is happening randomly for few of the shopping carts that too most of the cases first  item of  the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
    I have debugged entire scenario,but i couldn't find the problem.
    any one could you please advise me....why this is happening?whether it is a version problem?
    Thanks,
    Ravi

    Hello Ravi,
    I guess you already checked OSS notes for this.
    Have you checked in the area of ITS ?
    When ITS sends data to EBP, only the actual screen data is sent:
    - item procurement data from basic data
    - item accounting data from accountig tab
    then this data is used to update the SC.
    If you have debugged those 2 screens, you should see what is happening.
    You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
    If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
    Finally, there are two options:
    - this is an ABAP error, so you should catch it in debug
    - this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
    Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
    Rgds
    Christophe

  • TDS line items are not Display in FB60

    Hi Experts,
    when in simulate a document in  T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed.  when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
    why not shown in FB60 when simulating a document??

    Hi
    If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
    Regards
    Sanil Bhandari
    <a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60

  • Asset Line items are not updating in table ANEP

    Hi friends,
    I found that asset line items are not getting updated in ANEP table,.
    This is my precedure for posting of depreciation.
    I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
    In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
    Where is the mistake in my process..
    thanks in advance..
    Naveen

    HI Naveen
    The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
    ANEA should be the solution you are looking for.
    Hope it helps!
    Cheers
    Z

  • Line items are not summarized due to taxes

    Hi Friends,
    According to note no:36353,I maintained settings in OBCY and sales revenues,deductions are summarized if my billing document(VF01) having above 999lineitems.But if my customer is liable for taxes, then revenues,deductions are not summarizing in accouting document if line items are more than 999 and I am unable to release it to accounting(VF02).
    Can some one please advice me.
    regards,
    Seetaram

    HI,
    In my billing document (customer is liable for taxes)I have two tax condition types, one is JR1 & UTXJ, but both conditon type values are ZERO.So zero value is not posted to any G/L account.But my issue is when these two conditon types are appearing in billing document, I am unable to release billing document (VF02)to Accounting if more than 999 line items are there.
    If above two conditon types are not there ( it customer is not liable for taxes)in billing document, I am able to release billing document to accounting if line items are more than 999.
    someone please advice me.
    regards,
    Seetaram

  • Line items are not appearing in F-32

    Dear All,
    There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
    Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
    Regards,
    Rupa.

    hi,
    as seen from above mails,
    entries are existing in BSID table
    entries are passed as part of period end closing entries
    entry passed in month end and reversed in next month
    proposed sol
    1. check the mode of passing the  entry in tcode
    if tcode is coming from FBS1 the entries will not appear in F-32
    if 1 entry in FBS1 and other entry in F-32 then automatic reversal  entries were not passed.
    there was manual entry.
    that is the reason 1 entry in FBS1 and other in F-32.
    Thxs,
    GB

Maybe you are looking for