Po Mail Title and texts

Hello,
Can you please suggest if it is possible to change mail title for a amended PO as 'Purchase Order Amendment' whenever a change is done to PO and then the output message is reprocessed?Any advice would be greatly appreciated.Thanks.
Kind regards,
Pinky

Hi Pinky,
             Yes it is possible.The change can be made from the process you are mailing the person.it may be work item or may be specified in any other process from where you have configured the mail.Please check the process.I am sure your query will be resolved.
Have a best day ahead.

Similar Messages

  • Report Title and Text Area issue when exported to pdf using Viewer

    Hi there,
    We are using OracleBI Discoverer Version 10.1.2.55.26
    We have reports that displays Report title containing the following
    - Report Title
    - Runt Date and Time
    - Page No
    And text area which displays 'Last Page'
    Following properties are set at the worksheet level using page setup
    Report Title --> 'Print on every Page'
    Text Area --> 'Print on last page'
    The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
    But when we try to export the same report to pdf from Discoverer viewer, it displays
    - Report title on first page only.
    - text area on all pages
    All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
    Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
    Please let me know... If you have any questions then please feel free to ask.
    Thanks in advance for your help...
    Manish

    but when opened on other os x machines some text is colored differently than it should be
    Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
    In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
    If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
    /hh

  • TITLE AND TEXT SYMBOLS disappear in report LDB

    Friends,
    Im changing a select-screen generated in a LDB program but when i add my select-screen cant see its titles and text elements. Need help please....

    Hi Darill
      You can check this information access report source code and follow steps below:
         - Se38
         - Inform report name
         - goto -> Text elements - > Selection  Texts
    Please, be ensure that this object is active in the system and check it there is texts or Dictionary ref flag is set.
    It should solve this issue
    Kind regards

  • Broadcast/SD Titles and Text: Workflow

    I'm curious what, when doing Broadcast Titles and Text, is your workflow.
    Do you exclusively make slates in Illustrator etc.? Do they look significantly better and function better for Broadcast product than making same in LIveType or Motion. Is there a big quality advantage in Vector based Titles/Text
    Do you make any of your Titles/Text in LiveType or Motion.
    Is there another workflow for high quality Titles/Text you would recommend?
    Thanks

    I've used both LiveType and Motion for titling some very large QuickTime files (1440 x 900 @ 25fps) and the quality is perfect. As high a quality as you could ask for.
    I can understand the rationale for saying that Illustrator would give better results that PhotoShop (vector vs. raster), but if you're working with the native LiveType file in FCP you're still in a vector environment (at least I think so - anyone care to comment?).
    It's the same argument for using vector-based files rather than pixel based ones for DTP applications that are going to be printed by a commercial printer: The printer's RIP rasterises the file just once at the correct imaging resolution.
    To my mind, a vector is a vector: I can't see how Illustrator can give you 'better' vectors than LiveType or Motion - if you're using FCP to 'RIP' either of the original files to pixels, that is. Perhaps using a 3rd party rendering engine would give you better quality, in the same way that different PostScript RIPs give better quality than others.
    Maybe that's the reason why some people use Illustrator - as the non-FCP RIP can't handle native LiveType/Motion files?

  • How do I set a default title and text style on Quick?

    On Adobe Premiere Essentials 13 video editing, if I use Quick is it possible to set a default style for titles and text? I see instructions for setting a default style in Expert, but that doesn't seem to work in Quick. Thanks.

    aperture14
    What is this Premiere Elements Essentials 13? I know the program only as Adobe Premiere Elements 13 for Windows or Adobe Premiere Elements 13 for Mac. On what computer operating system is it running and is it a pre-installed program from the computer manufacturer?
    So, if you have some modified version of Premiere Elements 13 Windows or Mac, I cannot give you a yes or no answer to
    if I use Quick is it possible to set a default style for titles and text?
    In Adobe Premiere Elements 13 Windows (assumed Mac also), there should be no problem in creating a text title in the Quick workspace and saving a particular text style and setting that created text style to the default. Are you OK with doing that in the Expert workspace if not the Quick workspace?
    Please give us more details of your situation so that we can customize a reply for you.
    Thank you.
    ATR

  • APE4  Title and Text Animation

    I am trying to animate some multi line titles.  I found that the animation, Scalein, only works on a single line of text. Is this correct or am I doing something wrong.  The animation worked on a singel line but not on a multi line title.
    Thanks.
    Cheers!  Phil

    For working with multiple lines of text and animation, you can create several Titles, each with one line of text. These would be stacked above any footage on higher Video Tracks (VT's). Each single line can then be animated with the same, or different Effects.
    Depending on what one needs and wants, another way would be to do the Title with a block (multiple lines) of text, and then Keyframe, say Motion>Position for that Title. An example would be to have the Title begin off-screen and then "move" into the scene from the right, with Moton>Position Keyframes, hold for a period of time, then move out of the screen left, again with Motion>Position Keyframes. You will probably have to grab the right side of the Title and drag it to get the desired Duration.
    Good luck,
    Hunt

  • Use of ABAP expression in the Send Mail Header and Text

    Hi Workflow Gurus,
    I have a requirement wherein I have to inform the Manager of a user that his/her request for leave availment has been approved. However, we need to show the users name for the Manager to easily identify the user.
    Now, I checked the send mail step and it is possible to insert an expression, but the available expressions are confined within the containers available. Hence, we only have the user id of the workflow initiator.
    Is there a way to place a code in the send mail expression which will determine the user's employee name given the user id as opposed to having to create an FM and a method to determine the users name? Or is the only recourse to develop and fm and a method to determine these details in the background and pass it to the containers for extraction?
    Regards,

    If you don't have for example the employee name in the available container elements, you need to add it and do the necessary coding/development for it. Classically employee or user data has been retrieved by using a certain standard background task to get the user/employee object based on the user ID. This will require an additional background step but no coding since the task includes the coding already.
    It is anyhow possible to try to get the data for example with functional methods by using container operations  in the workflow (or it is also possible to do this in binding too) - but then you need to develop a functional method(s). In other words you can use a functional method for example in your binding or in a container operation. Check for example Jocelyn Dart's blog about functional methods. Anyhow, how well the functional methods will work depends on the SAP system version.
    Regards,
    Karri

  • UITableView each cell has image, title and text

    Hi, I have a UITableView and right now each cell has an image and a text. I would like to change the layout a little bit.
    For each cell, on the left you have an image. On the right, the top portion has Title which is in large fonts and bottom portion has text which is in smaller fonts. Does UITableView already support it or I have to write my code to customize it?
    Thanks,
    ff

    You need to configure a custom cell, either in code or in IB using a subclass of UITableViewCell. There are excellent, well explained examples of both techniques in Chapter 8 of Mark & LaMarche (and based on many of your questions, I think a few hours with that book would save you months of looking for free sample code). However there's also a good discussion with sample code in the +Table View Programming Guide for iPhone OS+ under Customizing Cells.

  • Blurry Titles and text on HD 6.0!!!

    hello everyone, I just got my new 12' powerbook and its my first mac ever... and I LOVE IT!!! I have no idea why I have been using pc all my life, macs are so much better!
    anyways, onto the PROBLEM... I have the new ilife '06 and I have installed imovie HD 6 but when I try to add a title onto black (and I havent tried on clips) it turns out very fuzzy and very unprofesional... when I preview it, it looks great, but not when I add it to my timeline... CAN SOMEONE PLEASE HELP ME!!!!
    thanks...

    It's not a problem, it's an intention. You would need a quad g5 top of the line to run the video in full resolution in real time! Too much data, so they arteficially reduced the resolution in iMovie for us to be able to happily edit our movies on slower machines. Your final DVDs will look just fine, believe me, they simply will. Same with other codecs in .mov files for QT playback. If you choose any codec and the highest possible quality, you will get almost sharp titles. But not in iMovie itself. I personally have set up the lowest preview quality in iMovie, because I prefer application speed ahead of viewing quality. I rather look at fuzzy than jerky subtitles. But again, everyone has different opinion. The end product is what counts anyway, right?
    Cheers.

  • Change mail subject and body text

    Hi all,
    i activated access method M in tr. SPAD and via this method i'm sending various reports in PDF to external e-mails. But when recepitiens recive e-mail i have subject of e-mail composed of SYSTEM ID and SPOOL NUMBER (e.g. R3P-12345) and i also have defaulted mail body text :
    The Mail Attachment Contains the Print File Created by User XXXXX , with Number xxxx from SAP System R3P .
    To Print the Data, Open the Mail Attachment with a Suitable Program and Print the Document.
    How can i change mail subject and body text?
    Regards,
    PS*

    For the output type Maintian the Mail body and subject.
    You can do this at NACE==>Output Type ==> Mail title and texts
    rgds,
    TM
    See the link
    http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/UtilityCode.html
    Message was edited by: Thomas Mann

  • Setting Mail Subject and Body

    Hi,
    I have configured sending a mail with PDF attachment for Invoices in NACE. the program is RLB_INVOICE The mail goes fine with the PDF attachment to external mail address.
    Now I need put subject and Body for the email.
    There are 2 issues now.
    1. In transaction NACE i am using "Mail title and texts" node when i fill the Document title, the same document title appears for the e-mail subject as well as the name of the attachment. But i need different names for the subject and attachment and the invoice number must be present in the subject.
    2. Under the "Text" tab when i maintain some texts, this doesn't appear anywhere in the mail.
    How do i maintain Subject and Body for the e-mail.
    Regards
    Rajvansh

    Hi
    Keep break point at SO_OBJECT_SEND.
    In the first screen
    VF01 / VF02  ->
    Set the Output type not to process immediately, use custom own transaction.
    Save and come out of transaction.
    And again
    VF01/ VF02 ->
    Issue Output type select the Output with medium 5.
    and click on the OK button.
    It should stop.
    To pass value from driver program to Enhancement point.
    I used FIELD SYMBOLS.
    Since i am offline, i do not have exact syntax.
    It will be something like this
    FIELD SYMBOLS : <OUTPUTTYPE> type any.
    ASSIGN '( PROGRAMNAME(FIELD NAME)) TO <OUTPUTTYPE>
    IF <OUTPUTTYPE> IS ASSIGNED.
    ENDIF.
    Or
    If it is custom driver program, you can use memory ID's also
    Regards
    MD

  • Output RFQ : Mail Title

    Hi all,
    I can not manage to set the title of my output ZMAI, which is a mail automatically tigger when the RFQ is saved.
    I've already try Messages>Output Control >Message Types > Define Message Types for Request For Quotation >  Maintain Message Types for Request For Quotation > Mail Title and text. I enter my text and the title I wish, but it is not working.
    I've already read the SAP Note 191470, and find nothing I manage to do in it to solve my issue.
    Someone may help me ?
    Thanks
    Best regards
    Mathieu

    Dhruba
    Thanks for your answer. But I'm not able to find the general data tab you are talking about.The closest thing I found is in "Assign Form and Output Program for RFQ".
    I look in the customizing, in "Assign Form and Output Program for RFQ". The programe name was ZHA00000R00 (I think it is a specific one), I put SAPMM06E. I find a field Form Routine, I put "TEXT_SYMBOL_REPLACE" in it, but and I dont' find the field "Replacement of Text Symbol" there.
    But now when I create a RFQ, the mail is trigger, but I don't receive any mail (I put my own mail adress in the Vendor data to check the mail). So I look in SOST, and when I go in I got a message : <i>" Express document "Update was terminated" received from author "Mathieu PAINEAU" </i>" and the mail doesn't appear in the list "SAPconnect : Transmission Request".
    Before I made the change, the mail was send (but with the wrong title and text). Perhaps there is something else to do ? I continue to look by myself, please if you have other ideas let me know !
    Thanks and regards
    Mathieu

  • How do I copy playlist song titles and artists names to place in an e-mail

    There is an "export song list" option under "file" that I tried to use. It gives you an option of saving the text in "plain text," "unicode," or "XML" formats. I've tried all 3 and when I bring up the text in Word, its not organized in columns, its just one word after the next, with information I don't need like track numbers, date modified, etc. I don't want to have to go in and manually delete all the extraneous information. Is there a way to format the list in columns so that I could delete all but the song title and artist name for a 200 song list?

    Never mind, I figured it out. I went to "view options" under "edit." I deselected everything but artist, song, and album. I went to the playlist and opt-Aed the list, copy, and then pasted into the e-mail.

  • HT1296 I recently purchased songs from my iphone.  All good...  But I then went to put them on my ipod touch.  They seemed to have downloaded but the songs wont play and the song title/the text, appears in a grey colour.

    I recently purchased songs from my iphone.  All good...  But I then went to put them on my ipod touch.  They seemed to have downloaded but the songs wont play and the song title/the text, appears in a grey colour and there is a downlaod symbol in front of the song title.  what do i do next??  They play on my iphone and from the itunes library but not from my ipod touch.

    If the songs are still on your ipod, make sure autosync is disabled in iTunes on your computer, connect and right click on it in the device list, then choose "transfer purchases" to copy all bought media and apps from your ipod to your computer.
    If the songs are not on your computer and got deleted from your ipod as well, you can't get them back, unless you have a backup of your iTunes library as part of your computer backup.

  • How can I disable e-mail and text messages when I'm close to or over my data quota ?

    How can I disable e-mail and text messages when I'm close to or over my data quota ?
    Is this possible? I don't see any options?
    All I see is this:
      Receive confirmations of many account transactions via Email and/or free Text Alerts delivered right to your cell phone. You can receive these confirmations for  
       transactions done online, over the phone or from your handset. Account management Text Alerts do not count against any Messaging allowances.
          Your bill is ready for review.
         Payment Confirmations: Your payment has been  received    Your credit/adjustment     has been applied.1
         Account Activity Confirmations     Plan changes     Feature changes1

    What phone?
    You would need to disable data on the phone itself.  You wouldn't do it online on your account.
    Note also that text messages do not count toward your data allowance.

Maybe you are looking for