PO not allowed beyond the target value of contract.
Hi Forum,
I have a Contract, when I create a PO with ref to the Contract, it should not allow the PO to be created beyond the target value of the Contract. Where should I make the configuration settings for this. Whenever the PO created beyond the target value it should give an error and should not allow to proceed further. Please advise.
Thanks in advance.
Ashish
Hi
Please maintain the message as an error
06-042 Target value of contract & exceeded by & &
in SPRO-> IMG-> Material Management-> Purchasing-> Environment Data-> Define Attributes of System Messages
Similar Messages
-
The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR
Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
ThiyaguHi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion. -
The value is not allowed for the field Cross-plant CM
Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar -
The value 1 is not allowed for the field variace key
Hi experts,
When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
Thanks & Regards,
Ravi.Hi
Can u tell me the field name . I cant get that field ref key. In which view does it come.
Reg
Raja -
Manual value adjustments are not allowed in the year of settlement
Hello Experts ,
We have an AUC which has a value of 683,969.70 . Now we have an unplanned depreciation of 82,500.00- which is yet to be posted .
My user wants to run AIBU to do an AUC settlement for the same asset .
However it is giving the following error .
Manual value adjustments are not allowed in the year of settlement
Message no. AW609
Diagnosis
It is not possible for technical reasons to settle an asset under construction (802438 0) with manual value adjustments in the year of settlement.
Procedure
Reverse the manual value adjustments in the year of settlement. Post them directly to the settlement receivers.
Please advice what needs to be done .
Regards
AnirbanHi:
By standard AUC assets are never subject to any kind of depreciation. They are assigned 0000 deo key in OAYZ . This is the cause of the error you are facing. Reverse unplanned depreciation and then settle it.
Regards -
Revision: 11359
Author: [email protected]
Date: 2009-11-02 05:20:01 -0800 (Mon, 02 Nov 2009)
Log Message:
Fixing MetadataWatcher not invoking a value change callback when the parent facet of the target value is added or removed.
Modified Paths:
osmf/trunk/framework/MediaFramework/org/osmf/metadata/MetadataWatcher.as
osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/metadata/TestMetadataUtils.asmikeporter wrote:
I'm sorry I'm not aware of any "cumbersome" subpanels - unless of course you don't know what you're doing. There is this wonderful invention called a "subVI" that can be used to organize and simplify your code, or are they too "cumbersome" as well? You should really learn a bit about what you are pontificating over before you start running off at the mouth.
Mike...
I didn't want to step on your toes. No need to get personal.
Subpanels make some additional code necessary that hasn't got to do anything with the actual program. And I AM using subIVs as I wrote in my first post, which is exactly the root of the problem.
Nevertheless I now solved it in a way that comes close to what I wanted. I don't know if some of you meant your suggestions to be understood that way (at least I didn't ). The subVIs will now "insert" themselves (via invoke node) into a subpanel on the main vi, which they are given a reference of at call. This adds minimal aditional code, especially on the main VI which I want to keep as clean as possible. By clustering the panel reference into the parameters the subVIs are already given (not used in the example I attached below), there isn't even a change on the terminals of the subVIs.
I got to check now if this works well with event structures within the subVIs or if it can create the same problems like multiple event structures within a single VI.
So no global variables anymore and no writing values by property node. I don't know if this just wasn't possible in previous Labview versions I had a try at that (I guess it was 8.6 and/or 2009) or I just didn't come up with the idea back then.
And if the text wasn't that helpful, here are two screens:
Parent VI:
SubVI:
Attachments:
main.png 2 KB
subvi.png 5 KB -
Junitreport 'redirect' is not allowed when the secure processing feature is set to true.
junitreport 'redirect' is not allowed when the secure processing feature is set to true.
Hello,
I'm running flexunit4.1.0-8 and I have an ant script running the test suite. I recently upgraded from FB 4 to 4.5 and now I'm getting
failures on junitreports. Here's the full error:
[junitreport] : Error! Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
[junitreport] Failed to process C:\TDMSE_2_6\tdmse\flex-test\flex_unit_reports\TESTS-TestSuites.xml
BUILD FAILED
C:\TDMSE_2_6\tdmse\build\flexunitbuild.xml:116: Errors while applying transformations: javax.xml.transform.TransformerException: java.lang.RuntimeException: Use of the extension element 'redirect' is not allowed when the secure processing feature is set to true.
Here's the junitreport section:
[code]
<target name="flex-unit-execute-tdmse-test-runner"
description="executes the test runner app">
<flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
toDir="${FLEX_UNIT_REPORTS_HOME}"
haltonfailure="false"
localTrusted="true"
verbose="true"
headless="false"/>
<junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
<fileset dir="${FLEX_UNIT_REPORTS_HOME}">
<include name="Test-*.xml"/>
</fileset>
<report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
</junitreport>
</target>
[/code]
And here's the full ant build:
[code]
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE project>
<!--
TDMS flex unit test suite
$Author:: hermannee $
$Revision:: 10963 $
$Date:: 2011-11-15 13:38:46 -0500 (Tue, 15 Nov 2011) $
$URL:: svn://ehsntpvld03.niehs.nih.gov/dev/tdmse_test_suite/trunk/build/flexun#$
-->
<!-- **** ADD THIS TO tdmes/build/build.xml *************
<property name="FLEX_UNIT_HOME" value="${tdmsedir}/../tdmse_test_suite" />
<target name="run_flex_units">
<ant antfile="${FLEX_UNIT_HOME}/build/build.xml" />
</target>
********************************************************* -->
<project name="flexunitbuild" basedir="." default="flex-unit-start-test-runner">
<tstamp>
<format property="build.date" pattern="MMMMM dd, yyyy" />
<format property="build.time" pattern="HH:mm:ss" />
</tstamp>
<property name="tdmsedir" value="${basedir}/.." />
<property name="builddir" value="${tdmsedir}/../build" />
<property name="FLEX_HOME" value="${builddir}/tools/flex-4.5.0" />
<property name="PARSLEY_HOME" value="${builddir}/tools/parsley-2.4.0" />
<property name="FLEX_UNIT_HOME" value="${tdmsedir}/flex-test" />
<property name="FLEX_UNIT_LIBS_HOME" value="${builddir}/tools/flexunit-4.1.0-8" />
<property name="FLEX_UNIT_REPORTS_HOME" value="${FLEX_UNIT_HOME}/flex_unit_reports" />
<property name="FLEX_UNIT_TEST_HOME" value="${FLEX_UNIT_HOME}/flex_unit_tests" />
<!-- ==== tasks ============================ -->
<taskdef resource="flexTasks.tasks" classpath="${FLEX_HOME}/ant/lib/flexTasks.jar"/>
<taskdef resource="flexUnitTasks.tasks" classpath="${FLEX_UNIT_LIBS_HOME}/flexUnitTasks-4.1.0-8.jar" />
<!-- dev -->
<echo>basedir: ${basedir}</echo>
<echo>tdmsedir: ${tdmsedir}</echo>
<echo>builddir: ${builddir}</echo>
<echo>FLEX_HOME: ${FLEX_HOME}</echo>
<echo>FLEX_UNIT_HOME: ${FLEX_UNIT_HOME}</echo>
<echo>FLEX_UNIT_LIBS_HOME: ${FLEX_UNIT_LIBS_HOME}</echo>
<echo>FLEX_UNIT_REPORTS_HOME: ${FLEX_UNIT_REPORTS_HOME}</echo>
<!-- =================================
target: run-tdmse-test
================================= -->
<target name="flex-unit-start-test-runner"
description="clean, compile and run tdmse flexunit tests"
depends="flex-unit-clean-tdmse-tests,
flex-unit-tdmse-compile-test-suite,
flex-unit-execute-tdmse-test-runner"/>
<target name="flex-unit-clean-tdmse-tests" description="Cleans the FlexUnit test and reports directories">
<delete dir="${FLEX_UNIT_REPORTS_HOME}" failOnError="false"
includeEmptyDirs="true" />
<mkdir dir="${FLEX_UNIT_REPORTS_HOME}" />
<delete dir="${FLEX_UNIT_TEST_HOME}" failOnError="false"
includeEmptyDirs="true" />
<mkdir dir="${FLEX_UNIT_TEST_HOME}" />
</target>
<target name="flex-unit-tdmse-compile-test-suite">
<mxmlc file="${tdmsedir}/flex-src/TDMSETestRunner.mxml"
output="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf">
<load-config filename="${FLEX_HOME}/frameworks/flex-config.xml"/>
<!-- ==== include tdmse resource bundles ====== -->
<locale>en_US</locale>
<source-path path-element="${tdmsedir}/flex-src/locale/{locale}" />
<include-resource-bundles>COMMON</include-resource-bundles>
<include-resource-bundles>OW</include-resource-bundles>
<include-resource-bundles>PREF</include-resource-bundles>
<include-resource-bundles>RD</include-resource-bundles>
<include-resource-bundles>RG</include-resource-bundles>
<!-- ==== compile parsley library ============= -->
<compiler.library-path dir="${PARSLEY_HOME}" append="true">
<include name="parsley-flex4-2.4.0.swc" />
<include name="spicelib-flex-2.4.0.swc" />
</compiler.library-path>
<!-- ==== compile all tdmse flex-src ========== -->
<source-path path-element="${tdmsedir}/flex-src" />
<source-path path-element="${tdmsedir}/flex-test" />
<!-- ==== compile all flexunit swc's ========== -->
<compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}" append="true">
<include name="*.swc"/>
</compiler.library-path>
<!-- ==== compile all flexunit swc's ========== -->
<compiler.library-path dir="${FLEX_UNIT_LIBS_HOME}/mocklibs" append="true">
<include name="*.swc"/>
</compiler.library-path>
<compiler.verbose-stacktraces>true</compiler.verbose-stacktraces>
<compiler.headless-server>true</compiler.headless-server>
</mxmlc>
</target>
<target name="flex-unit-execute-tdmse-test-runner"
description="executes the test runner app">
<flexunit swf="${FLEX_UNIT_TEST_HOME}/TDMSETestRunner.swf"
toDir="${FLEX_UNIT_REPORTS_HOME}"
haltonfailure="false"
localTrusted="true"
verbose="true"
headless="false"/>
<junitreport todir="${FLEX_UNIT_REPORTS_HOME}">
<fileset dir="${FLEX_UNIT_REPORTS_HOME}">
<include name="Test-*.xml"/>
</fileset>
<report format="frames" todir="${FLEX_UNIT_REPORTS_HOME}/html"/>
</junitreport>
</target>
<!-- ======================================================== -->
</project>
[/code]
I haven't seen much info about this problem anywhere on google except for this forum post:
http://forums.adobe.com/thread/740146
Thanks for any help!If you include the xalan.jar library to the build.xml execution classpath everything works!!!!!!.
I hope it will be userfull. -
ORA-56901: non-constant expression is not allowed for pivot|unpivot values
Getting following errors
ORA-56901: non-constant expression is not allowed for pivot|unpivot values
ORA-06512: at "APPS.PIVOT_AWARD", line 16
ORA-06512: at line 5
when i run the following function it is giving error as above.
can you please help me
create or replace
Function Pivot_award return sys_refcursor
IS
v_dept VARCHAR2 (20000);
v_query VARCHAR2 (1000);
op_rs sys_refcursor;
BEGIN
SELECT LISTAGG(award_number,',') WITHIN GROUP (ORDER BY award_id)
INTO V_DEPT FROM xxdl.XXDL_CD_SCHEDULE_K_GTT ;
v_query :=
'SELECT *
FROM (
select award_name, award_id,award_number from xxdl.XXDL_CD_SCHEDULE_K_GTT)
PIVOT(max(VAL) for award_number in ('||v_dept||'))';
OPEN op_rs FOR v_query;
return op_rs;
END;
SELECT LISTAGG(award_number,',') WITHIN GROUP (ORDER BY award_id)
INTO V_DEPT FROM xxdl.XXDL_CD_SCHEDULE_K_GTT ;
Result of 1st query is PPE_T_CAPITAL,XIBNG,XIABP,XIABQ,XIABR,XIABS,XIABT,XIABU,XIABV,XIABW,XIAAE,XIAAF,XIAAG,XIAAH,XIAAI,XIAAJ,XIAAK,XIAAL,XIAAM,XIAAN,XIAAO,XIAAP,XIAAQ,XIAAR,XIAAS,XIAAU,XIAAU,XIAAV,XIAAZ,XIABD,XIABE,XIABF,XIABG,XIABH,XIABI,XIABJ,XIABK,XIABL,XIABM,XIABN,XIAAA,XIAAB,XIAAC,XIAAD,XIABY,XIABZ,XIACA,XIACB,XIACC,XIACD,XIACE,XIACF,XIACG,XIACH,XIACI,XIABA,XIAAW,XIAAX,XIAAY,XIACN,XIACT,XIACU,XIACP,AAAEX,XIACW,XIADCHi Frank,
Here is the create table and insert script. This is needed for me to show in report rows to columns.
create table award_test(
AWARD_NUMBER VARCHAR2 (15) ,
AWARD_NAME VARCHAR2(30) ,
TOTAL_PROCEEDS NUMBER ,
EARNING_PROCS NUMBER ,
TOT_PROCS_EARNINGS NUMBER ,
GROSS_PROCS NUMBER ,
PROC_REF_DEF_ESCR NUMBER ,
OTH_UNSP_PROCS NUMBER ,
ISSUANCE_COST NUMBER ,
WORK_CAP_EXP NUMBER
--insert script
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAE','CEFA CP',300000000,200,300000200,300,500,600,0,700);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABG','CEFA K',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAS','Escondido Village #3',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('AAAEX','SU2009A',801806000,null,801806000,null,null,null,1806000,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABI','CEFA L-6',17815000,null,17815000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAP','CEFA R',115050508.15,null,115050508.15,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACG','CEFA D',53150000,null,53150000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAB','Stu Union-1962',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAA','Notes Payable-Commercial Paper',350000000,null,350000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABZ','CEFA L-3',9840000,null,9840000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAV','CEFA B',18106540,null,18106540,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAI','Medium Term Notes - Tranche 3',50000000,null,50000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAZ','Recycling Pool',473379904.44,null,473379904.44,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAY','CEFA T2',187550000,null,187550000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAM','GMAC',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAU','CEFA A/K',16922982,null,16922982,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAC','SU TB 2002A - PARS',50000000,null,50000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABL','CEFA L-9',15490000,null,15490000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABY','CEFA L-2',8775000,null,8775000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAJ','Frat 1&2',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAW','CEFA S',180727500,null,180727500,null,null,null,-472500,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAQ','Escondido Village #1',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACW','CEFA U',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACF','CEFA E',19753227.34,null,19753227.34,null,null,null,-106772.66,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIACN','CEFA T3',27562758.96,null,27562758.96,null,null,null,-47941.04,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAG','Medium Term Notes - Tranche 1',50000000,null,50000000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('PPE_T_CAPITAL','PPE_T_CAPITAL',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAK','Frat 3',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAF','Tresidder',0,null,0,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIABH','CEFA L',5055000,null,5055000,null,null,null,0,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAU','CEFA A/K',6605655,null,6605655,null,null,null,-74345,null);
Insert into "award_test" (AWARD_NUMBER,AWARD_NAME,TOTAL_PROCEEDS,EARNING_PROCS,TOT_PROCS_EARNINGS,GROSS_PROCS,PROC_REF_DEF_ESCR,OTH_UNSP_PROCS,ISSUANCE_COST,WORK_CAP_EXP) values ('XIAAD','SU 2024 Bonds',150000000,null,150000000,null,null,null,0,null);Expected output rows to columns (i took first two insert statements)
'XIAAE','CEFA CP',300000000,200,300000200,300,500,600,0,700
'XIABG','CEFA K',0,null,0,null,null,null,0,null
I need to have awardnumber and corresponding details below
'XIAAE' 'XIABG'
'CEFA CP' 'CEFA K'
300000000 0
200 null
300000200 0
This way i need to get all the information vertically with awardnumber. I have written following code but it is not working.
create or replace
Function Pivot_award return sys_refcursor
IS
v_dept VARCHAR2 (20000);
v_query VARCHAR2 (1000);
op_rs sys_refcursor;
BEGIN
SELECT LISTAGG('''' || award_number || '''',',') WITHIN GROUP (ORDER BY award_number)
INTO V_DEPT FROM award_test ;
v_query :=
'SELECT * from award_test
UNPIVOT(VAL for operator in(
AWARD_NAME,
TOTAL_PROCEEDS,
EARNING_PROCS ,
TOT_PROCS_EARNINGS ,
GROSS_PROCS ,
PROC_REF_DEF_ESCR ,
OTH_UNSP_PROCS ,
ISSUANCE_COST ,
WORK_CAP_EXP ))
PIVOT(max(VAL) for award_number in ('||v_dept||'))';
OPEN op_rs FOR v_query;
return op_rs;
END;throwing an error ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.PIVOT_AWARD", line 11
ORA-06512: at line 5
also when i run simple query
SELECT * from award_test
UNPIVOT(VAL for operator in(
AWARD_NAME,
TOTAL_PROCEEDS,
EARNING_PROCS ,
TOT_PROCS_EARNINGS ,
GROSS_PROCS ,
PROC_REF_DEF_ESCR ,
OTH_UNSP_PROCS ,
ISSUANCE_COST ,
WORK_CAP_EXP ))
PIVOT(max(VAL) for award_number in ('PPE_T_CAPITAL','XIBNG','XIABP')) Throwing an error
ora-01790 Expression must have same datatype as correspoding expression
Edited by: 893185 on Nov 10, 2011 2:00 PM -
This construct is not allowed as the origin of an assignment
Please help..
create or replace package testins as
x number;
y number;
z number;
end;
create or replace procedure p5 as
begin
for i in 1..5 loop
testins.x(i):=i;
testins.y(i):=i+1;
testins.z(i):=i+2;
end loop;
execute immediate
'begin
forall i in 1..:n
insert into test (a,b,c) values
(testins.x(i),
testins.y(i),
testins.z(i));
end;' using 5;
end;
Error:
*4/1 PLS-00308: this construct is not allowed as the origin of an assignment*
*4/1 PL/SQL: Statement ignored*
*5/1 PLS-00308: this construct is not allowed as the origin of an assignment*
*5/1 PL/SQL: Statement ignored*
*6/1 PLS-00308: this construct is not allowed as the origin of an assignment*
*6/1 PL/SQL: Statement ignored*Hi,
try this ...
create or replace procedure p5 as
begin
for i in 1 .. 5 loop
testins.x := i;
testins.y := i + 1;
testins.z := i + 2;
end loop;
execute immediate 'begin
for i in 1..n
loop
insert into test (a,b,c) values
(testins.x,
testins.y,
testins.z);
end loop;
end;'
using 5;
end p5;You have the package variables as numbers, not collections which is why you cannot use them with an array index viz.
testins.x(i):=i;Hope it is clear.
PS : code not tested -
The requested feature DSC-Service is not found on the target machine.
Hi,
I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
I then trid to execute that code on the localhost,
it came up with this error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
message: The requested feature DSC-Service is not found on the target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : localhost
Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
Thanks a lot.
P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
not found.
At line:1 char:1
+ Add-WindowsFeature
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
andHi Anna,
I'm in the same situation as Nathys.
I tried everything you indicated. However, it still does not work. I got the same error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : devops-01
The SendConfigurationApply function did not succeed.
+ CategoryInfo : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
+ FullyQualifiedErrorId : MI RESULT 1
+ PSComputerName : devops-01
PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.
I have restarted the computer, but it still does not work. -
BAPI CASESERVICE CREATEMULT - Alternative price not allowed for the service
Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help.Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help. -
Only the constants are showing up in the target values.
Hi Guys,
Please help me about my problem in message mapping..
Im quite knew in XI version 7.0.
How come Only the constants are showing up in the target values. my constant values are only doc_type and partn_role.
The rest are data from sql. How can I solve this..Please help.
This is the result of my test tab
Left side - sender
<?xml version="1.0" encoding="utf-8"?>
<ns:MT_TRAVEL_SENDER xmlns:ns="HTTP://TRAVEL.COM/TRANSACTIONS">
<row>
<DOC_TYPE>ZTRV</DOC_TYPE>
<SALES_ORG>4000</SALES_ORG>
<DISTR_CHAN>40</DISTR_CHAN>
<DIVISION>41</DIVISION>
<SALES_GRP>411</SALES_GRP>
<SALES_OFF>4101</SALES_OFF>
<PURCH_DATE>2008-10-24</PURCH_DATE>
<PMNTTRMS>Z015</PMNTTRMS>
<PURCH_NO_C>AVADIUDS </PURCH_NO_C>
<PARTN_ROLE>AG</PARTN_ROLE>
<PARTN_NUMB>0001100074</PARTN_NUMB>
<INSERTED>1</INSERTED>
</row>
</ns:MT_TRAVEL_SENDER>
right side -test result under receiver
<?xml version="1.0" encoding="UTF-8"?>
<ns1:BAPI_SALESORDER_CREATEFROMDAT2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
<ORDER_HEADER_IN>
<DOC_TYPE>ZTRV</DOC_TYPE>
</ORDER_HEADER_IN>
<ORDER_HEADER_INX>
<UPDATEFLAG>I</UPDATEFLAG>
<DOC_TYPE>X</DOC_TYPE>
<SALES_ORG>X</SALES_ORG>
<DISTR_CHAN>X</DISTR_CHAN>
<DIVISION>X</DIVISION>
<SALES_GRP>X</SALES_GRP>
<SALES_OFF>X</SALES_OFF>
<PURCH_DATE>X</PURCH_DATE>
<PMNTTRMS>X</PMNTTRMS>
<PURCH_NO_C>X</PURCH_NO_C>
</ORDER_HEADER_INX>
<ORDER_PARTNERS>
<item>
<PARTN_ROLE>AG</PARTN_ROLE>
</item>
</ORDER_PARTNERS>
</ns1:BAPI_SALESORDER_CREATEFROMDAT2>Hi leelaratnam morampudi ,
How can I check if im getting the data in sql? I think it get the data but dont pass the value in bapi
this is the test result in sender
<DOC_TYPE>ZTRV</DOC_TYPE>
<SALES_ORG>4000</SALES_ORG>
<DISTR_CHAN>40</DISTR_CHAN>
<DIVISION>41</DIVISION>
<SALES_GRP>411</SALES_GRP>
<SALES_OFF>4101</SALES_OFF>
<PURCH_DATE>2008-10-24</PURCH_DATE>
<PMNTTRMS>Z015</PMNTTRMS>
<PURCH_NO_C>AVADIUDS </PURCH_NO_C>
<PARTN_ROLE>AG</PARTN_ROLE>
<PARTN_NUMB>0001100074</PARTN_NUMB>
<INSERTED>1</INSERTED> -
Multiline FCC if row in source file increased--not posting in the target
Hi All
I am doing a multiline FCC.
If I give 2 rows of data in the source file then the file is picked up and posted in the target.
But if I give 3 rows of data, though the file is picked up but not posting in the target.
In Adapter monitor Receiver CC shows "up and running and no message processing now"
Where and What went wrong ?
ThanksHi Bhavesh,
Sorry for the delayed reply
The details are below
Source Data type:
CardAccount---Recordset 1 to unbounded
(SubStructure)
AccNumber
CardExpireDate
CardType
SpendingLimit
CostCenter
GLSubAcct
CardTransaction---Recordset 1 to unbounded
(SubStructure)
AccountNumber
PostingDate
Period
BillingAmount
TransactionDate
Document Name:HSBC_OB_MT
Document Namespace:http://----
.com
Recordset Name:Details
Recordset Structure:CardAccount,,CardTransaction,
Recordset per Message:*
Key Field Name:HSBCKEY
Key Field Type: String (Case-Sensitive)
CardAccount.fieldNames-----AccNumber,CardExpireDate,CardType,SpendingLimit,CostCenter,GLSubAcct,HSBCKEY
CardAccount.keyFieldValue--01
CardAccount.fieldSeparator---,
CardAccount.endSeparator---'nl'
CardAccount.processConfiguration---FromConfiguration
CardTransaction.fieldNames---AccountNumber,PostingDate,Period,BillingAmount,TransactionDate,HSBCKEY
CardTransaction.keyFieldValue---02
CardTransaction.fieldSeparator---,
CardTransaction.endSeparator--FromConfiguration
ignoreRecordsetName---true
sample source file
4666000000000003,06132002,2,0000000000200000,8273,7384-3,4666000000000003,06152002,08000,0000000000002500,06152000
4666000000000003,06132002,2,0000000000200000,8273,7384-3,4666000000000003,06152002,08000,0000000000002500,06152000
4666000000000003,06132002,2,0000000000200000,8273,7384-3,4666000000000003,06152002,08000,0000000000002500,06152000
Thanks,
Ashok -
PSA data change not loaded to the target.
Hi all,
We have the data in PSA (it is the master data)- while transferring the data from PSA to the target, system throws error - on analysing the error we found that the characters in the data is wrong, the same was corrected in the PSA - on reloading after correction to the target, system is ignoring the corrected records and loading only the other records.
What could be the reason for this behaviour.
Can experts help.
Regards,
M.MDear Mr.Goud/Murali,
Thank you for your immediate reply and instructions.
Mr. Goud,
The PSA QM status is only green but even then the corrected record is not loaded to the target.
Mr. Murali,
As per your information we do not have an Error DTP - i have only one DTP and we are in BI7.00 - I have deleted the request from the target and corrected the erroneous record and am trying to load only that record by using the filter option in the DTP - still the data is not loaded.
Can you suggest method of adopting - i am not able to understand why that corrected record is not loaded. Is it that manually corrected record in the PSA will not be loaded into the target?
Kindly clarify.
Regards,
M.M -
The update operation is not allowed in the current state of the request
When users have logged a request through the service manager 2012 portal and they go back in to add user input they sometimes receive a message that says " The update operation is not allowed in the current state of the request." The state of the
request has not changed it is still Active and has not breached its service level .
I can't seem to find any information about this error and don't know how to troubleshoot it. Any help and advice would be appreciated.
Thanks
Sarahok, so they're adding user comments after creating the service request. looks like this:
the first thing to check is that the user is added to the default, un-scoped "End User" security role, or the custom end user security role they are added to has a scope that includes all work items. The "user input" field adds a user comment related
to the SR, so the ability to create user comments is required to use this field.
Maybe you are looking for
-
Problem With Saved IR's And CSV Downloads.
Apex 3.2 I have found a strange problem. I have an interactive report and 2 of the columns (msg and msg_1) are based on the same data. One column (msg) is to display in the report and the other (msg_1) for the download. I do this by putting condition
-
Hi, We currently implemented "How to Load a flat file". All function modules, planning level, package and planning function are created succesfully. Still, when we're trying to load a file the same error message pops up "<b>Value x is not permitted f
-
Configure content presenter within webcenter spaces
Hi everybody, I want to display content in webcenter based on current local. For exemple: if the corrent local is en, the content presenter should display files which the name contains "_en". How can I do that either by customizing the content presen
-
Renaming the files present inside a war file.
Hi, I am using the java.util.zip API for reading a war file(a zip file). I wanted to know whether its possible to rename a particular file present in the zip using this API. Thanks in advance.
-
How to set va05 sales order list is backgroun job
Hi Friends, My problem is when the user trying to take the report of sales order from 1 st january to till date in va05 system is going into dump? My question is how can we set this as a background job can we solve this issue through background job?