PO number not displaying for STO PO between storage locations in VL10B

Hi Experts
I have created a STO PO for stock transfer between 2 storage locations.
The PO has been created correctly - along with the "Shipping" details aptly.
However, when I execute VL10B along with the PO, the output screen doesn't show the PO created.
I have checked various discussions and verified the same. However, I am unable to create the outbound delivery for the PO.
Please help me on this.
Best Regards
Sudhi

Remove everything from the selection screen (including shipping point and delv. date). Just put the PO in the Purchase Order tab. Check all the other tabs, material, user role etc for extraneous/incorrect info.
Does the PO appear then?

Similar Messages

Define Shipping Data for Stock Transfers Between Storage Locations

Hi Guru,
Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
Purchasing --> Purchase Order -->
Set up Stock Transport Order-->
Set Up Stock Transfer Between Storage Locations-->
Define Shipping Data for Stock Transfers Between Storage Locations

The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
It is for the transfer of stock between storage locations with any movement type.
Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
You have to create a internal Vendor and Customer.
Hope it helps.

MRP - Create STO for Stockk Transfer between Storage Locations

Hi Everyone,
I have a scenario where MRP run should create Planned Order as well as STO for a VSF Requirement. The reason is our Plant has got 2 Storage Locations. One is the Production Storage Location and the other is Warehouse Storage Location. The Planned Order should be for Production SLoc and STO should for Stock Transfer from Production to Warehouse Storage Location. Your suggestions are much appreciated to resolve this issue.
Thanks,
Jay.

new releaes bring new features........
not all new features can run in old environments.
I know that companies did already Storage location to storage location STOs in 4.6c but they had z-tables to assign customer numbers at storage location level, and they had changed some coding to make it happen.
I am not sure if there is an OSS note that explains the steps and modifications needed......but try to search OSS.

IPad phone number not displaying for FaceTime

How do I get my iPad phone number to appear as the contact number for FaceTime and messaging? I have gone into settings for these apps but the iPad phone number is not an option.

Use an email address (free gmail.com).
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Replenishment between Storage Location with MRP Planning

Dear PP Gurus,
I need you expertise on the below question.
I have a plant with multiple Storage Locations. One Storage Location is Main Warehouse and another ilocation s External Warehouse (3PL) where excess stock are kept due to storage capacity in the Main Warehouse.
Now the requirement is replenish the stock to Main Warehouse from the External Warehouse with Stock Transfer using MRP trigger the Stock Transfer.
I know the setting in MRP 4 View in the material master, the Indicator to set to 2, maintain a reoder point in the Sloc: 1200 and Replenishment Qty: 1500 and Special Procurement Type: (what should be the setting)
My question is where to set the target Sloc and source Sloc, then only system will trigger the replenishment Stock Transfer?
The storage location which is plan separately, will have a different segment. Therefore, in terms of the availability check for the Sales Order it will consider as normal based on the scope of check.
Appreciate the reply
Thanks & Regards
Pooja

Dear ,
1.You need to set up the MRP for Plant with group of storage location and run MRP-MD01 .You can try SCOPE of planning -OM0E.
As an information : In standard MRP I, f you have several storage location for your plant, you cannot plan for them separately unless you assign them to a separate MRP area.If a storage location (alone) is assigned to an MRP area, it means you wan to plan for it separately. If several storage locations are assigned to an MRP area (or let's say to a plant), it means you want to plan using all of them - and you cannot choose only one and plan for it (you can exclude a SLoc from planning w/o assigning it to MRP area).
2.Find steps for config for activating Sloc to Sloc transfer within plant using STO : -
follow path: SPRO--> Materials Management -->Purchasing -->Purchase Order -->Set up Stock Transport Order -->Set Up Stock Transfer Between Storage Locations
1. Activate Stock Transfer Between Storage Locations
2. Assign Delivery Type and Checking Rule According to Storage Location
purchase document category 'F' , here use PO type UB, supplying plant, issue sloc and delivery type , (prefer to create new delivery type by copying delivery type 'NL' replenish delivery
3. Define Shipping Data for Stock Transfers Between Storage Locations
for plant defind sales org and distribution chenal and devision
select the pline and go to sloc
assign there customer (created for sloc)
4. Define Rule for Determination of Shipping Point
for newly created delivery type set L storage location specific shiping poing determination
5. Assign Shipping Points According to Storage Location, assign her sloc based shiping poing determination
at last when you will create PO put issue storage location, system will determine shiping data based on config done.
after this process will be same as STO plant to plant using shiping.
You will need to mention the issuing storage location during posting the delivery,
ie, ME21N - Create STO
VL10B - Create Delivery
VL02N - Post Goods issue - here you will need to mention the issuing storage location
Refer : STO process -Std in SAP
Hope it is clear to you .
Regards
JH
Edited by: Jiaul Haque on Jul 7, 2010 10:23 AM

Excise Invoice number not display in case auto generate

Dear Experts,
we have use auto excise invoice generation functionality, it is working properly, but only Excise Invoice number not display after saving billing document. what to do for display the same after saving billing document.
Regards
BK GAIKWAD

Thank you Lakshmipathiji,
My question is when we have create excise invoice through J1IIN excise invoice number has been display in bottom line after saving billing document.
But in case we have creating auto generate Excise invoice, Excise Invoice number not display in same screen. How to do to display excise invoice after saving billing document.(Excise invoice generating in background but number not display in same screen)
We have changeover manual to auto generate excise invoice system.
Regards
BK GAIKWAD

CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls

Hi Team,
we are running CUCM 9.1(2a),
we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
Regards
Ananthakumar

Are A and B both Avaya phones?
So it looks like you're not seeing the alerting name/connected name getting updated then? Do you have alerting names configured on the directory numbers? Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it. Might just be something that needs to be tweaked in the 46xxsettings.txt file.

FBL5N_Excise Invoice Number not display

Hallo Experts,
I am SD Consultant, when after create the Excise invoice, number will be display in FBL5N_Customer ledger (Ref. key 3 field) but only 10% cases it will not display with same customer / Excise group / series group
I am unable to address it. please help
Regards
BK GAIKWAD

Thank you Lakshmipathiji,
My question is when we have create excise invoice through J1IIN excise invoice number has been display in bottom line after saving billing document.
But in case we have creating auto generate Excise invoice, Excise Invoice number not display in same screen. How to do to display excise invoice after saving billing document.(Excise invoice generating in background but number not display in same screen)
We have changeover manual to auto generate excise invoice system.
Regards
BK GAIKWAD

Material Description is not displaying for few records in Report

Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.

Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk.

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

There's an error while delivery note creation for STO order

There's an error while delivery note creation for STO order even stock available in unrestricted stock
Edited by: sharma aman on Nov 8, 2011 9:00 AM

Dear Sharma Aman,
Check whether the following link helps you.
Mesaage : while creation of delivery : An item with no delivery quantity .)
Please search in google with the error message and definitely you will get some older posts in SDN which is solved.
In that case , you need not wait for the solution as it is already available.
If the solution provided do not suit you, then post it in SDN so that it will be a learning for others.
Try to search in the forum or in google before posting further queries
Thanks & Regards,
Hegal K Charles

Contact Names Not Displaying for My Conversations ...

Hi Contact Names are Not Displaying for My Conversations in C7.
I took C7 in April 2011.Suddenly today (July 26th 2011).Names are not displaying and also my mobile became very slow when accessing ..
Please tell me what to do

You are welcome. Please resolved the thread?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Link Button Not Display for Tax Amount

Hi Experts,
I have one Problem
I am creating A/R Invoice Document and I have assing Tax Code for Item
It will show Tax Amount but link button or drill button not display for tax amount
pls give me solution
Warm Regards,
Sandip Kokate

HI
How to Clear Chumb
And I am Selecting Tax Code but still it will not show Tax Amount Link button but Tax Amount is perfectly Match
Regards,
Sandip kokate

Stock data of serial number not suitable for movement

We have a situation where we have had to put some serialized parts on a rework production order. When we are trying to bring them back into stock, we're getting a message that says "Stock data of serial number not suitable for movement." I'm guessing that this is because this serial number had existed in stock before (since this is a rework of an existing material/serial number.) We need to receive this back into stock using this same serial number. How is that possible?
Thanks in advance for your help.
Sybil

Dear,
Please refer these threads,
Re: Removing Serial number Profile
IQ02 Shows Blocked Stock for Serial Number
Hope it will help you.
Regards,
R.Brahmankar

PO number not displaying for STO PO between storage locations in VL10B

Similar Messages

Maybe you are looking for