PO order number error in Sales order

Hai Everybody,
I have a problem of PO order number error in the sales order.
While creating Sales order, i am entering the PO order number in SO.
Though the document is complete, i am getting this error message : "ordering errors; tested ORGID: 7147144007" and unable to proceed further (saving order & delivery).
Please give me some inputs to solve the issue.
Thanks in advance
Jaya

Thanks for your inputs.
@Ram : i have created the same senaerio in Quality system though manual entries still i am facing the same problem i dont know how they have created in Production system, how to find out please tell me.
@Raghu.k : i have checked in VOV8 ( check po number is set blank which means no check ), still i am facing the problem.
Please suggest further to solve the issue.
Thanks
Jaya

Similar Messages

PO number change in Sales Order.

Hi,
We created one sales order. ( Here we given Sold to Party, Ship to party and PO number). After that we did partial delivery and Billing. We opened the sales order and removed the PO numer and saved for some reasons. Again we opened the sales order in change mode and given the same PO number as earlier. But system throwing the error like "Purchage order does not exist in the system".
Can u please tell me what is the reason.
Regards
JYOTHI.

Hi
The P.O number in the sales order will be controlled in the configuration of document type in T code VOV8
Kindly check there for the field Check purchase order no
Check for the message setting in OVAH t code for the message no V4115
Regards
Damu

Credit Card number entered CRM sales order is not appearing in R3 Sales ord

Hi,
We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
Appreciate your help on this.
Regards
Mohammed Roshan

Hi All,
Looking forward to your valuable inputs on this as to how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
Regards
Mohammed Roshan

Number of times sales order./delivery blocked

Hi,
Do we have a report which gives details about number of times sales order/delivery blocked because of credit management.
Or there is any work around for getting the same?
I request you to kindly suggest your valuable inputs.
Regards,
Phani Prasad.

Hi Balaji,
Thanks for your reply.Please find the below example.
Customer A was blocked for credit limit on 01.01.2011 and subsequently released using VKM3.
Again the same customer was blocked on 02.01.2011 and once again released.
How do I know the number of times Customer A was blocked and released for a given period.(2 times in the above example for that period).
Please explain.
Regards,
Phani Prasad.

Error in Sales order - Consumption account not found

Hi Gurus,
I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
Please help me . This is critical.
-Prashant

Hi,
Your observation is perfectly write, the possible errors are
1. Check the combination of Account modifier of Purchase order account assignmnet or PR. Based on the modifier and check the relevent combination in OBYC
Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
2. If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
Rewards if it helps
Regards
Goutham

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
Not able to book the sales order because of this issue

Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail). Allowing for such would therefore require customization.
As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it. And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM. The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing". OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent). OM customization is therefore required in order to hook any service item up to its corresponding product item. Many customers who configure service along with product have implemented such a customization.
(Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract. Customers have likewise developed customizations to address this, as well.)
As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous). It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
Eogan

Assignment number Field in sales order header

Hi All,
Can anyone let me know the ORDERS05 IDoc segment that corresponds to the Assignment number field in sales order header Accounting tab?
I need to specify the assignment number while creating a new order through IDoc.
Thanks.
Regards,
Riyaz

Hi,
Use transaction we60 to find the relevant documentation for your idoc type.
regards,
Jakub

What table where i can find the errors in Sales Order

hi,
what table where i can find the errors in Sales Order. here's my situations, I need to create a abap report of CRM sales order not replicated to R/3 and show what's the error. I can't find the actual error in CRMD_ORDDERADM_H and CRMD_ORDERADM_I. I also tried calling program "CRM_ORDER_READ" but the program doesn't display/returns error's on header and item level.
please help.
earl g. faren

hi,
what i need is a table where i can find the sales transaction errors. I'm doing a abap report to list down sales transactions with error(s). I checked the table CRMD_ORDERADM_H and CRMD_ORDERADM_I but there's no field for transaction errors.
please help me find a table where I can link the tables above to get the specific errors for a sales transactions.
thanks alot.

Itm cat Error in sales order

Gurus,
I am facing an error in sales order creation.
When I enter the material and qty and press enter, I am getting an error saying the Item category is not defined.
have anyone came across this error, kindly help

HI,
Generally item category is determined by the combination of
sales doc type + item cat grp +usage + high level itm cat(if any).
so check whether the above requirements are fulfilled i.e for the sales doc type (if customised) and item category (maintained in mat master sales org-2) are maintained in VOV4 or not.
Reward points if helpful.
regards,
gupta.

CRM - automated error monitoring tools to track errors in sales orders

could you please let me know whether we have any
automated error monitoring tools to track errors in sales orders
Thanks in advance

I wont recommend turning off cookies in production.
Turning off cookies was only from a Performance
Testing perspective, Not using cookies for a performance test but using them in production, sort of invalidates the test, since much of the issue I had was the testing tool waiting for data to be returned to the cookies so it could be used to move to the next page.
Partner Management uses all of them. I uses iStore for its external launch page, OA framework for its functionality, but then links to Sales online for Opportunities, and Quotes which I believe is AK framework. so you have a mixture of several
frameworks involved...... plus Discoverer Viewer...

How to get the ammendment sales order number and original sales order no?

Hello sir's,
Please tell me the table for ammendment(revised) sales order number and original sales order no.
Thanks in advance,
vikram

Solved

Alpha Numeric number Ranges for Sales order Acording to sales office wise.

Hi Experts,
         I have a Issue for genrating sales order numbers With Alpha Numeric Number Ranges for sales office wise Internaly . How can we get this is there any Userexits or badi for this . If Any one Come across this issue plz guide me.
   The Alpha characters should not change that will be sales office region code. only the Numeric numbers should change .
Ex;   Abc-123000 to Abc-200000
Regards,
Ravi.

This alpha-numeric format is not possible directly with SNRO settings.
You need to opt for external number range, and in the exit of your respective transaction you need to takecare of this number generation explicitly by programming.
http://www.sap-img.com/sap-sd/number-ranges-in-sales-order.htm
any more inputs from experts are welcome..
Hi,
1. goto include MV45AFZZ and to user exit Save_document This form is called before COMMITand double click on FORM USEREXIT_SAVE_DOCUMENT.
2.it will show the program MV45AF0B_BELEG_SICHERN from were this user exit is called, selcet the program and click on Display.
3. you can use the enhancement point enhancement-point beleg_sichern_01 spots es_sapmv45a. just below the PERFORM USEREXIT_SAVE_DOCUMENT to call the badi method on_costing_component.
regards.
santhosh reddy
Message was edited by:
        Santhosh Reddy
Message was edited by:
        Santhosh Reddy

How to get the delivery number for the sales order

hi
how to get the delivery number for the sales order

Hi,
1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
Hope it helps...
P.S. Please award points if it helps...

Pricing Error on Sales order :Critical:

Hi all,
I'm creating a sales order, where in I'm getting Pricing Error.
Condition record is maintained for PR00 in USD
It is getting populated but showing red signal.
VPRS also showing Red signal. If I go in analysis of VPRS , it shows message exchage rate error. But Company code currency & document currency is same USD.
so It should not give this error.
But If I go to customer master & in sales area tab & maintain currency as USD, then there is no error in Sales order. All is fine.
But logically , system should not ask the exchage rate as Company code & document currency both are USD.
I expect some quick replies as we are now in impact analysis & on verge of go live next month.

Thats what I mention in previous post that
Its a standard beheviour, Document currency is proposed/determined in sales order or billing doc on the bases of customer master record of the Sold-to Party.
And exchange rate for same currency is out of question.
Thats why, when maintain curreny in customer master (Sold-to Party), you don't get error.
As, system is able determine/propose a currency for document currency.
Further, what you can do is press F1 button on the following fie,lds for more clarification.
> Sales Order - Header - Sales Tab - Pricing & Statistics Section - Doc. Currency Field
> Customer Master - Sold-to Party - Sales Data - Sales Tab - Currency Field
I hope that clarifies.
Regards
JP

Custom number range to sales orders

HI Gurus
I have a requirement to keep a custom number range to sales orders. The number range should start with X.The next two characters should be based on the user name. The remaning part is the sequence number. Please advice the best way to do it.

HI Seshu
If we need to use that user exit we should assign the number range as internal. From here you can select a number range but not the number. If we assign any number in the user exit then the vbeln is refreshed. I am thinking of creating externel number range and write some code in the field exit of vbak-vbelen. Will it have any side effects. And is there any number range object in SAP. I know in oracle we can create a number (counter). Please advice

PO order number error in Sales order

Similar Messages

Maybe you are looking for