Podcast home page not showing all podcasts

Hello fellow podcasters!
I've successfully created a podcast, but am now in a bit of a jam. See, the home page of my podcast is now not showing all my podcasts.
Click here for my podcast:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=277495620
Now, I'm not sure if the home page only shows the most recent ones (If so, how do they define, "most recent"?) and moreover, if it only shows the most recent ones, how do I change it so it shows ALL of the podcasts created?
Appreciate any help you can provide me.
Sincerely,
Dennis Chin

iTunes Store shows the number of podcasts that are listed in the XML file. Some podcast-making programs and online services which create the XML file for you limit the number of episodes in the XML file - usually there is a setting somewhere to adjust this.

Similar Messages

  • List view not showing all podcasts

    Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
    Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
    Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
    I'm running iOS 7.0.6 and iTunes 11.1.5

    Hey there sporry,
    It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Restart the app
    Close the app and open it again.
    Restart your device
    Turn the device off and on.
    Update your device software and your apps
    Update your device to the latest version of iOS.
    Update your apps:
    Open the App Store and tap Updates.
    If updates are available, tap Update All.
    If asked, enter your Apple ID password. The updates will download and install.
    You might need a Wi-Fi connection to update some apps.
    Install another app from the App Store
    If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
    Remember to use the same Apple ID that you used to download the app that you're having issues with.
    Reinstall the app
    Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
    Delete the app.
    Press the Home button.
    Go to the App Store and download the app again.
    Wait for the app to download, then open it from the Home screen.
    If the download stops, you can resume it.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • APS metrics page not showing all CPU's

    I have installed BO 4.0 SP02 patch 11. I have seperated the CR
    Scheduling service as a seperate job server form AJS.
    My CR jobs are running fine however, I have 8 CPU on that machine but
    in matrics page of Job server, it is showing
    only 4 CPU. Why it is not showing all the 8 CPU?
    does it mean that its limited to work for 4 CPU only.

    Hi Atul,
    Would it be possible that you have in fact 4 CPUs which are all dual cores?
    So it's like you have 8 CPUs but in reality it's only 4 CPUs?
    Regards,
    Philippe

  • Podcast Search results not showing all episodes

    I'm new to podcasting & our podcast isn't showing up properly.
    When you look at our podcast in the search results, only one episode shows up.
    There are three episodes total, but they show up only if you subscribe to the podcast.
    Is there a way for the search results to show all of our episodes?
    Our iTunes link is http://itunes.apple.com/us/podcast/the-hills-fellowship/id448179201
    Our RSS feed is http://sermon.net/rss/client/thehillsfellowship
    Please help if you can!
    Also, they were uploaded last week...so it's been enough time for them to be processed & show up.

    I'm afraid I can't give you a comforting answer.
    The feed at the URL you quote contains the tag
    <itunes:new-feed-url>http://sermon.net/rss/thehillsfellowship/main</itunes:new-feed-url>
    so the feed iTunes is now using is
    http://sermon.net/rss/thehillsfellowship/main
    and that is the one you should be updating - though in fact they are almost identical and it's possible that the method you are using updates them both.
    The feed at http://sermon.net/rss/thehillsfellowship/main is valid and I can't see anything wrong with it. As you say, it can be subscribed to and shows all three episodes: but the Store page (and thus the search results) show only the first episode.
    The Store should have updated by now: it's not unknown for the Store to get stuck and fail to update for several weeks: usually it eventually updates and I have no idea why it does this. It doesn't happen often, but I have seen the occasional complaint.
    However there is another issue which may be relevant: although the date of the latest episode is July 17th, the feed was updated today:
    <lastBuildDate>Mon, 15 Aug 2011 16:11:23 GMT</lastBuildDate>
    <pubDate>Mon, 15 Aug 2011 16:11:23 GMT</pubDate>
    This raises the possibility that there was something wrong with the feed before (hence the failure to update) but that whatever you've done today cleared it. That would indeed result in the three episodes showing on subscribing but not in the Store - it would take a couple of days or so to catch up.
    If that is the case the Store should update in a day or two. If not, then it might update at some future date or it might not: I can't explain that.
    I should at least give it two or three days and see what happens. Check the Store page using the link you gave, not the Search results as these often lag behind.
    If you don't get a result after several days you could try iTunes Support, but I have to tell you that they don't have a good record for helpfulness and the chances are you won't get anywhere with them.  Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

  • Itunes 10.1.1 will not show all podcast updates via Refresh function

    I am having a problem with my podcast not refreshing on the itunes podcast page when a publish a new episode. If I use the "show all available episodes" function the episode appears but if I click refresh or the automatic update functions the podcast is not new seen.
    This is only a problem with itunes 10.1.1 on OS X 10.6.5, the refresh function operates on my windows machine using the latest itunes version. I am awaiting a response from Libsyn where my podcasts are based but I was wandering if anyone is having any similar problems.
    Once the podcast is selected as previously mentioned, download and play is normal

    Thank you but alas the Store's check available downloads facility does not work for podcasts.
    This problem has only appeared since the last itunes update to my knowledge. It may well be an rss related issue as it does not seem to effect other podcast's new episodes, though I cannot see why it should only be a problem on my Mac...and all subscribe settings are constant for all podcast issuers on both platforms...It might just be a hidden setting somewhere but I've tried everything

  • CS Home Page not showing

    Hi all,
    I am facing a stragnge problem. when go to portal page and enter the Username password instead of landing on home page some junk characters are shown. as below "�����“KÓ0…×ĸc«zÜ2, I+ ÎCš—:KǹM,œ8Ø7}ðëq’Vtà ²‰œ{νǟøìêi‘|^Âmòpϯ_îïÀ¸wËäZˆ«äª«±|dó7ø Òto”Ù|8ˆK$ ¶™F^Vž{tzur¯aÛžúåu^Ð4µ&‹¶:£"ÔÆï¢ÔºO-‘-§“zޝAjB¦h[hBîk©pZÙ“uÔç>>Ö»6ê ÖeÞ©ÖIeðuñ t0{á  ¤D)µiYè*Díy®×lþ¾J}𠾡Q¶D /G@wуsGFWÈ‹~/,YW®ÿ…Ó)˜?à>nµÌÚ¬Üàú8l0ø_W&u{Æ¢½Ý%iÿØáo8Û,"
    can somebody please help.
    regards,
    swapnil

    Dont bother I could solve it.

  • Skype Home page not showing activity?

    When signed in to Skype through the MS account and linked Facebook side, when I clicked on the Skype Home page, I used to see all the current Facebook activity and postings from my Facebook contacts. now I only see the odd contact friend?
    I always thought this was a very useful part of Skype, has this now changed or is it me?
    Many thanks. 

    See this:
    http://community.skype.com/t5/News-and-Announcements/Important-notice-for-Facebook-users/ba-p/395181...

  • Sharepoint 2010 - Home Page not displaying, all other pages work fine

    The web page URL <server>/sitepages/Home.aspx is not displaying when accessed. All other pages work fine. We changed the default welcome page to another page, and that works. When we try to access the Home.aspx, it displays "An unexpected error
    occurred" message. The Home.aspx only contains a couple of Lists, with Links, and a calendar. The other odd thing is that the Home.aspx displays in SharePoint designer in Advanced Edit mode, but won't display in a browser. Any ideas?

    Hi Isepic,
    1) Check the approval of the page (Home.aspx) whether it is in pending state .
    2) OR might be some problematic webpart is added in the page. You can try to close it and access. To do that,you can try to access the web part maintenance page of home.aspx and test by closing the webpart one by one.
         To access the maintenance page,pass the parameters ?contents=1 after the home.aspx
           For example, http://site url/home.aspx?contents=1
    3) Also,check the ULS logs after accessing the home.aspx to know what is happening.
    Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem. 
    s p kumar

  • I just did an update to 6.0 on Lion. Now when I re-open Safari after closing it by clicking the red button  it re-opens to my home page, not all my previous tabs..  prior to the update it would re-open with all my previous tabs, which is what I want.

    I just did an update to Lion  10.7.4 with Safari  6.0. Now when I re-open Safari after closing it by clicking the red button,  it re-opens to just my home page, not to all my previous tabs as it did before the update.  I prefer having my old tabs re-open.  How can I fix this?

    I've had what I think is the same problem since the most recent software update.  I have Lion 10.7.4 and have updated to Safari 6.0.  The most noticeable difference is that where previously I had two boxes at the top of the Safari window (one to enter URL addresses, one for Google searches), there is now only one box for both functions.  I don't like that as well, but I can live with it.  However, since the most recent software update my "back button" only works about 5% of the time. Most of the time it is grayed out.  So I usually can't get back to previous pages using the back button.  Also, when I've clicked a link that opens a new window (for instance, going through the return process at Amazon, I clicked UPS locator and it opened a new window), where in the past I would have just clicked the red button after I had the information, the UPS locator window would have closed, and I would have been back at Amazon - now if I close the UPS locator window, all Safari windows close.  The Safari application doesn't close, but the Amazon window closes, I'm back to an empty screen, and I have to open a new Safari window and reenter everything.  I'm using a work-around of clicking on History and selecting the description of the window I want to get back too, but that only works part of the time. In the Amazon example, that's what I did once I had the UPS info, but even though I clicked the correct window description, it took me back to the beginning of the return process & I had to reenter all the info.  Of course, that info was easy to reenter, but if I'm in the middle of a complicated process, it's a big problem.  I've filed a bug report; I surely hope the Apple engineers are able to fix this.  I'm used to using the back button function a lot!

  • Podcast "home page" doesn't update

    Any help would be appreciated. Two of our five podcast "home pages" don't show new episodes. However, current subscribers receive the episodes. A lack of new episodes at the home page for these podcasts makes it look dated.
    I can't seem to find a difference in the feeds that work fine and the ones we produce that don't update. A link to see an example of a non-updating "home page" is below. Thanks [mjm]
    http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=203017732
      Windows XP  

    You can try:
    *http://kb.mozillazine.org/Firefox.exe_always_open
    Create a new profile as a test to check if your current profile is causing the problems.
    See:
    * [https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile Basic Troubleshooting: Make a new profile]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Podcast image is not showing during testing.

    I subscribed to my podcast feed to test it in iTunes before submitting to the iTunes store. All is working well except the podcast image is not showing. What do I need to do to get the image to show?
    Feed: http://www.lhfcaz.org/sermon_feed.xml
    The image is located here: http://www.lhfcaz.org/images/itunesimage.jpg
    Thanks,
    Wayne

    The image which appears on the Store page is referenced in the feed: but the image which appears when you subscribe (either manually or from the Store page) is not - it is embedded in each episode's media file. This page explains the situation and what to do about it:
    http://homepage.mac.com/rfwilmut/notes/faq.html#coverart

  • HT1351 My I Pod is not showing the Podcasts I have downloaded on the library section in my itunes and also on the Ipod but is showing in the spome 3000 plus eposides in the sync section but will not show on Ipod or Library section even after syncing pleas

    My Ipod is Classic is not showing any podcasts which I have downloads either on the library within itunes or on the ipod but is showing in the syncing section some 3300 plus podcasts but even after syncing they are noty showing on the library or on the Ipod am missing a step here as I have ticked all before syncing ??
    Is this a software failure ?

    I have sorted it myself!!
    Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem.

  • SharePoint 2013 site coll's created. Home page not displaying for any site collection in farm

    SharePoint 2013 site coll's created. Home page not displaying. Same issue for all site coll's in the farm. Done the basic checks. Any Ideas?

    Hi lakshita,
    Would you please check whether you can go to the page:
    http://siteurl/_layouts/settings.aspx page:
    http://siteurl/default.aspx page? If so, go to Site Features in site settings page, reactivate the Wiki Page home page feature, check the result.
    If not, please check whether there is related information in ULS log and event viewer log file? Does the page shows page not found or other errors? Check whether the site can be opened in other machine?
    Thanks,
    Qiao Wei
    TechNet Community Support

  • SelectOneChoice not showing all values from database

    Hi!
    I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
    P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
    Code:
    <af:selectOneChoice id="selAction" value="#{row.idCmd}"
    unselectedLabel="&lt;Selecione>">
    <af:forEach var="alertTypeNode"
    items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
    <af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
    label="#{alertTypeNode.dataProvider.nmCmd}"
    id="si1"/>
    </af:forEach>
    </af:selectOneChoice>

    In your page binding check the rangesize setting for the executable you use - set it to -1.

  • Dreamweaver CS5 not showing all recordsets in databases/bindings/server behaviors windows

    Dreamweaver CS5 is not showing all recordsets created on a page in the databases/bindings/server behaviors windows.
    I'm on XP, DW version 11.5 build 5344.
    Any idea of how I fix that?
    Thanks,
    Betty

    Dreamweaver CS5 is not showing all recordsets created on a page in the databases/bindings/server behaviors windows.
    I'm on XP, DW version 11.5 build 5344.
    Any idea of how I fix that?
    Thanks,
    Betty

Maybe you are looking for

  • What driver is making all clips be "white screen"?

    I'm using Premiere Pro CC on Windows 7.  I previously was able to import and edit clips via exactly the same workflow - but now, not matter what clips I import, they all appear as the 'white screen'.  The thumbnail is a frame of the video, but as soo

  • Magic trackpad question

    I posted this question in another section of this site and didnt get a response so I thought Id put it in another section and maybe Ill get a response this time.  Basically, my problem is after my computer goes to sleep and I click a key to wake it u

  • MMPV for last month of year

    Hi Guru's I am going to open MM period through MMPV for jaunary 2010. i am puting period = 01 and Fiscal year 2010 and getting error message that " 2010 is not your current cleander year. so what is my fiscal year in this case?? seeking your help. Re

  • I CANT EXPORT FILM!!!

    hey everyone, big problem here. ok so i have to get this wedding video out by today, but i cant get a full movie clip! my final run time is 30 minutes, and whenever i export, it'll take aobut 2-3 hours to render. but when the render is complete, i on

  • Encoder measurement

    I found this paper that shows how to take the encoder measurment,,, now there is VI front panel shown at the bottom of this paper.... Now Iam using an NI Elvis board to take measurement and I need to know the code for this front panel.. http://zone.n