Podcast - works on iTunes page but not when subscribed

Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.

It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3

Similar Messages

  • Fixed headers while scrolling works fine in bids but not when deployed to reportserver

    Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
    Thanks in advance...............
    Ione

    Hi ione721,
    Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
    View in Internet Explorer 9 by following steps:
    When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
    When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • Load swf works in Publish Preview but not when published

    Hi Folks,
    I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
    SecurityError: Error #2000: No active security context.
    I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
    Any help would be much appreciated and rewarded with Karma
    movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
    var fl_Loader_9:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_9:Boolean = true;
    function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
    if(fl_ToLoad_9)
      fl_Loader_9 = new Loader();
      fl_Loader_9.load(new URLRequest("search.swf"));
      addChild(fl_Loader_9);
    else
      fl_Loader_9.unload();
      removeChild(fl_Loader_9);
      fl_Loader_9 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_9 = !fl_ToLoad_9;
    movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
    var fl_Loader_10:Loader;
    //This variable keeps track of whether you want to load or unload the SWF
    var fl_ToLoad_10:Boolean = true;
    function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
    if(fl_ToLoad_10)
      fl_Loader_10 = new Loader();
    fl_Loader_10.load(new URLRequest("refunds.swf"));
      addChild(fl_Loader_10);
    else
      fl_Loader_10.unload();
      removeChild(fl_Loader_10);
      fl_Loader_10 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_10 = !fl_ToLoad_10;

    I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

  • Podcast episode in iTunes feed but not on preview page

    I have been experiencing different behavior with my podcast in the iTunes store this week. My latest two episodes took a couple of days to update in the iTunes feed when for the past two months they have appeared within an hour.  What concerns me is that they are not displaying on the preview page for my podcast in the iTunes store, even the one that was published two and a half days ago. Apple's email support persists in telling me how to submit a podcast to the store and suggesting that I phone support and ask my question for a fee. Liberated Syndication tells me that the feed URL is accurate and that the episodes in question have been published. It also says several of its customers are experiencing this problem currently with iTunes.
    Any ideas?
    My feed URL is http://astroinsight.libsyn.com
    My iTunes URL is http://itunes.apple.com/us/podcast/astroinsights-podcast/id479652731

    Your feed is at http://www.cooksux.com/theahhashow/podcast/podcastblaster.xml
    iTunes is unable to read this feed because there is a fatal error in the episode of 27 November. The 'itunes:subtitle' tag contains an ampersand ('&') by itself - because an ampersand indicates the beginning of a code sequence which is never completed, and this renders the feed unreadable. You need instead to use the code
    &
    as you have in fact done elsewhere. Since this is in episode 5 this is why your subscription stopped at episode 4. I'm not clear how the Store has managed to keep updating, except that the Store and the iTunes application are quite different things and it may be that the Store software has been arranged to ignore this error. Anyway, make the change and it will work again. (Make sure there aren't any more instances of this.)

  • MP3 tags work in iTunes 11 but not in Windows 7 - Fixed

    I tagged a bunch of MP3 downloads in iTunes 11, but the artist/track/album and other information did not show up in Windows 7 file information or in Windows Media Player.
    The fix that worked for me was to convert to MP3 tags to ID3 tags to version 1.0.
    Steps:
    -Open iTunes
    -Find the songs you want to convert in the Songs view
    -Right click the songs
    -Choose Convert ID3 Tags...
    -Check the box for ID3tag version
    -Choose v1.0
    -Click OK
    Your mileage may vary, of course, but this worked for me and all of the embedded info was properly updated. Note that I did not have album art and I don't know if rolling back the version will affect that. Good luck.

    Thanks turingtest2.
    I tried your None>2.3 path and it appears to be a superior method to my original suggestion.
    I hadn't noticed, but the track #s did not come through to Windows using my original method. They come through when converting to None then to 2.3. Your method, as you note, also provides the advantage of longer field lenghts. I am sure there are other advantages to 2.3 over 1, if  nothing other than it's closest to the most up to date standard.
    I tried converting to 2.4, but none of the data comes through to Windows.
    Here is a revised set of steps. Note that this method will clear artwork.
    -Open iTunes
    -Find the songs you want to convert in the Songs view
    -Right click the songs
    -Choose Convert ID3 Tags...
    -Check the box for ID3tag version
    -Choose None
    -Click OK
    -Choose Convert ID3 Tags... again
    -Check the box for ID3tag version
    -Choose v2.3
    -Click OK
    Last comment: There may be better solutions using other software such as id3tagit, but the solution above works right from iTunes.

  • AJAX with PageMethods works in Application Pages but not with PageLayouts

    Hi All,
    I have created a class which contains public static method decorated with WebMethod and SciptMethod attributes
    Public class BasePage : Microsoft.SharePoint.Publishing.PublishingLayoutPage
            [WebMethod(EnableSession = true)]
            [ScriptMethod(ResponseFormat = ResponseFormat.Json, UseHttpGet = false)]
            public static string HelloWorld()
                return "Hello world is working!";
    Now I changed the <%Page ..> Tag of the PageLayout to inherit from the above class.
    There is a ScriptManager in the master page with EnablePageMethods = true
    I can see the Javascript methods are generated for HelloWorld(..) however the return result is "The Server Method HelloWorld failed." Error code is 500
    However the exact same code when I use with a application page (_layouts) and change the Page tag to inherit from the same base class above - it works OK.
    Both of them Page Layout and Application Page use the same master page - but one works and other does not.
    Additional Information:
    a) Am using Jquery and JqueryUI in the master page.
    b) Site use Publishing Template
    c) Variation is enabled on site
    d) Site has both Anonymous and Windows NT authentication
    The method Path for Application page shows as
    /_layouts/test.aspx/HelloWorld
    and for the page created using the Page layout is:
    /en-us/Company/Pages/Default.aspx/HelloWorld.
    Could anyone please advise what could be wrong where it does not work with Publishing Pages?
    Would please appreciate ideas / thoughts.
    Thanks,
    Mohan
    -- Mohan | My Blog

    Are you sure that you are getting HTTP 500 error ?. Usually HTTP 500 error denotes service unavailable at the server side or at the server end point. What is the exact fiddler trace you are getting ?
    If it is still HTTP 500, then one of the referenced components in the page layouts conflicts the ajax page methods call. Please let me know your findings
    Please mark the replies as answers if they help or unmark if not.

  • I can find my Podcast in the Itunes store but not in the Podcast list.

    If I search for my podcast in the Itunes store it shows up. So, I click subscribe, and everything looks like its working. When I check the Podcast section of my library I don't see it. The link to my podcast is http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=358348024. The feed is http://www.rodsotr.com/RODSOTR/Podcast/rss.xml. I'm hoping the issue is just with the itunes on my computer. Any ideas?
    Thanks,
    Rod

    It works perfectly well for me: I can't suggest why it isn't for you. When you click the 'Subscribe' link in the Store page you should see a 'Downloads' item appear in the sidebar below 'Purchased' showing the progress of downloading the top episode, and above all that in the top section of the sidebar under 'Podcasts' you should see the podcast.
    If you don't: try going to the 'Advanced' menu, choosing 'Subscribe to podcast' and entering the URL of your feed and see what happens.

  • Includes work on one page, but not another.

    Hello all.
    I made a Spry naviation bar. It works on the orginal page, but when I put it on other pages, the menu bar is there, but the spry functionality is gone.
    I've also had problems with my CSS stylesheet.  I tried putting it in my header include, but it doesn't work on all my pages, but it does work on some.  I've checked the links and they seem to be right as well
    Any tips?
    Gregg

    As a guess, I would say that you are using doc relative paths inside your include files, and the parent page that does not work is in a different directory than those that do work. But like most questions here, without seeing your code we can only guess.

  • Cloudfront signed url works with "setup page", but not local copy

    I generated a signed url so I could do rtmp streaming through cloudfront from a S3 bucket.
    When I put this url as the "src" of the player found here: http://osmf.org/dev/2.0gm/setup.html, I can see my video, however, it doesn't work on my local copy of Strobe Media Player.
    I went and grabbed the latest available versions from source forge (2.0 of OSMF and 1.6 of SMP), compiled them, and tried to play the file, but it wouldn't work on my compiled copy.
    My player works fine with normal videos, only when using signed urls from cloudfromt do I get ths error
    It uses a signed url like this:
    rtmp://s161ki0ys7euuz.cloudfront.net/cfx/st/vid_cdntest001?Signature=RSS0PV4RCq6lsF7gKE202 sHJw0lxCE9zwJbISVuovaBnARQFCVZ2e6SSejHXN4uIT5uotDBT8iYZVvfUC3rq0A571CWVETsnlJ4jhEir1JE5w-p jC-cx~CjxkcVQSj8EC07zozoNCypiBggLy0w2Id8TUxTuX9KrIDlN~BImwBjN1cnuZMpms9dpfuw-MLFefHtTDwfZZ Yh00LSUAEqA0BwqhA6NECHbrkaXQjUM7r5TRSP3ZH5uFIWhUWLMH3WWYLyz5bQab3FQxZhI4BhdFPJm6Z0m6HVVnuz eMqibMWDGybtoepjkTUYJqeTaYQUpIHrp1-0-dDVhhCx7BxCOlA__&Key-Pair-Id=APKAJSRQXYNPUENHF6HQ&Exp ires=1387398525
    And it requires a flashvar "urlIncludesFMSApplicationInstance" to be set to true. The flashvar is set in my local copy of the player.
    I set "verbose" to true, and I get "Playback failed. Failed to play(stream ID: 1)"
    The AWS people were able to play the file on their debug player, so it isn't a problem with the video. It's just something about my copy of the player or the environment I'm on.

    I'm initlaizing the player using swfObject like this:
    $(document).ready(function(){
            callPlayer("rtmp://s161ki0ys7euuz.cloudfront.net/cfx/st/vid_cdntest001?Signature=EYvGzU2I4CRLE4h8pD8fec3A6fwfIqadzuAtVBQcsDeh0zU9rexKJqq-5GVNG~PdNlV~nbdSlUl4FAJ6rCuOTAh7BrXkieg26z4y3uMgzLm3I3p8GSjTyUBe5rIbZhnxUulSFfHoOWFDV-keORil3~zG91OVDKxvsbIrZv6-IsYTJQzYA7w6R2jy6SiJEJwfqNvD5xdiv2w87GuR472kELQ79yvI6twgeDnZOkN~w9khQSVLcqqmAkkTHQxxkBR8hs954VaUEAKZO~ejwZ3ju8xTUAeuuQu3y06r6SHNGwhLdQh00qV1PUHSMdPdHp3SzZdCxwAepV6xUx2~TR2idw__&Key-Pair-Id=APKAJSRQXYNPUENHF6HQ&Expires=1387466710");
        function callPlayer(x){
        $("#PlayerHolder").html("<span id='PlayerDiv'></span>");
            var flashvars = {};
            flashvars.verbose=true;
            flashvars.src=x;
            var parameters = {};
            parameters.urlIncludesFMSApplicationInstance=true;
            var attributes = {};
            attributes.name="player";
            attributes.id="player";
            swfobject.embedSWF("StrobeMediaPlayback.swf?ID="+Math.random()*100,"PlayerDiv","470","320","11.2","scripts/expressInstall.swf", flashvars, parameters, attributes);

  • 4g iPod works w/iTunes 5, but not with iTunes 2

    I have two G4s, one with OSX.2.8 and iTunes 5, the other has OS9.0.4 and iTunes 2.0.4. My iPod will mount and work with the G4 with iTunes 5, but I haven't been able to get it to mount on the G4 with iTunes 2. I've used the same firewire cable for both machines, and the firewire ports seem to be working on the G4 w/iTunes 2. My iPod software is up to date. I tried resetting the firewire ports, but the iPod still doesn't show up. Is iTunes 2.0.4 too outdated to work with an updated 4G iPod? Any ideas?
    Thanks,
    Gary

    I imagine that's the problem as well. What's the latest version of iTunes that is compatible with OS9? Is iTunes 2.0.4 it? My kids have a bunch of older games that they play on OS9 because the games freeze on OSX's classic environment, so I'm hesitant to move them over to X, but I bought my daughter an iPod mini for Christmas, and I want her to have her own iTunes library.

  • Report works in Crystal Reports, but not when scheduled in Crystal Server

    Hi,
    I have a pretty simple report designed in Crystal Reports 2008. Basically it shows a list of call notes (memo field) from customer activities in our CRM system. The report works fine in Crystal reports, but when run or scheduled in Crystal Server 2008 the output is always blank. Furthermore, the page format etc. is "lost" in crystal server, so that the output is PDF of a quadratic blank sheet (not my standard A4 format)... Exporting to other formats - excel, Word etc. all gives the same result.
    I have tried to strip out various formulas, formatting etc from the report, but nothing helps. Which leads me to thinking that the real problem is that the report contains a memo field? Anyone else had this problem?
    wkr
    Claus
    Edited by: Claus Poulsen on Nov 9, 2010 3:34 PM

    Hi Claus,
    I've had issues between what Crystal does and what the Report Server does.  To resolve this, we found out Crystal Reports 2008 latest service pack has some things that will fix Server 2008 and they aren't in the latest Server update. 
    We updated Crystal Reports 2008 on our machines.  Installed the latest update for Crystal Server and then installed Crystal 2008 on the Report Server and installed the Crystal Reports 2008 update.  A lot of our compatibility issues went away after that. 
    Good luck,
    Brian

  • Form validation working on one page, but not the other....

    Hope someone can help with this.
    I have a page below with a load of contact forms which all work fine :
    http://www.goodsafariguide.com/judges/judges.php
    I've trued to recreate (admittedly mostly by saving as....) the same functionality here :
    http://www.goodsafariguide.com/awardssite/judges/
    They do work when fulled in correctly, but there's a glitch with the validation.
    Basically when you fill in a form incorrectly, the page reloads, with the form's accordion closed. When you open it up, its showing the ugly looking error at the top of the form.
    Any ideas what's causing it to act like this, as opposed to the way it works in the first link?
    Thanks.

    Iain71 wrote:
    I've trued to recreate (admittedly mostly by saving as....) the same functionality here :
    http://www.goodsafariguide.com/awardssite/judges/
    They do work when fulled in correctly, but there's a glitch with the validation.
    When looking at the source code I note that - unlike the first page - this one doesn´t contain any references to the ADDT form validation libraries ("../includes/tng/scripts/FormValidation.js" and "../includes/tng/scripts/FormValidation.js.php"), meaning that the validation can´t work.
    Cheers,
    Günter

  • Works fine in debug but not when published

    So I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands).
    The code:
    stop();
    stage.addEventListener(KeyboardEvent.KEY_DOWN, slideNav);
    function slideNav(event:KeyboardEvent):void
    switch (event.keyCode)
      case Keyboard.DOWN:
       nextFrame();
       break;
      case Keyboard.UP:
       prevFrame();
       break;
      case Keyboard.HOME:
       gotoAndStop(1);
       break;
      case Keyboard.END:
       gotoAndStop(this.totalFrames);
       break;
    When I test it using the debug (Ctrl+Shift+Enter) it works fine.  When I publish it, the up and down arrows work but the Home and End keys do not work.  They do nothing, no error messages, nothing.
    Using Flash CS4 Pro 10.0.2.  ActionScript 3.  Windows 7 64-bit.
    Any suggestions?
    Thanks.

    Nevermind.  That was stupid of me.  Have to disable the keyboard shortcuts or it doesn't work.

  • FM CRM_PRIDOC_READ_OW works in source system but not when executed from BW

    Hello All,
    I have extended an extractor in the source system by adding additional fields.
    One of the FM I've used is CRM_PRIDOC_READ_OW. When I run an extraction test in the source system eveything works and data does populates into the new fields.But when I run the infopackage from the BW side, I get an error message which saids the transaction has been terminated. I've been able to trace and pinpoint the possible cause of the error. When I do not call this FM, the infopackage finishes but I do not get data for the new fields and when I do call this FM, I get the error.
    Has anyone experiance this issue before?
    Your assistance will be much appreciated. Here is a portion of the code I wrote:
      loop at I_TABLE into l_s_ZASCRM_OPPT_I.
        lv_guid = l_s_ZASCRM_OPPT_I-GUID.
        lv_item_guid = l_s_ZASCRM_OPPT_I-ITEM_GUID.
        call function 'CRM_PRIDOC_READ_OW'
          exporting
          iv_header_guid = lv_guid
          importing
          ES_PRIDOC = ls_pridoc.
        loop at ls_pridoc-PRIC_COND into ls_pric_cond.
          if ls_pric_cond-kposn = lv_item_guid.
            case ls_pric_cond-STUNR.
              when '40'.
                l_s_ZASCRM_OPPT_I-zz_gpm_ttl_i = ls_pric_cond-kwert.
              when '55'.
                l_s_ZASCRM_OPPT_I-zz_gpd_ttl_i = ls_pric_cond-kwert.
              when '60'.
                l_s_ZASCRM_OPPT_I-zzfy_sp_i = ls_pric_cond-kwert.
              when '70'.
                l_s_ZASCRM_OPPT_I-zzfy_gpm_i = ls_pric_cond-kwert.
              when '80'.
                l_s_ZASCRM_OPPT_I-zzfy_gpd_i = ls_pric_cond-kwert.
            endcase.
          endif.
        endloop.
        append l_s_ZASCRM_OPPT_I to l_s_ZASCRM_OPPT_Itab.
        clear l_s_ZASCRM_OPPT_I.
      endloop
    Thanks,
    Jeff

    Hello Geo!
    Thank you for your question. I think we mapped all the systems you show. Always the same error. Concerning your systems my transport log would say:
    Source system R3DEV does not exist
    We mapped this.
    Any ideas? Is there maybe something in customizing to do what could be forgetten? The system is newly connected and there have never been a transport compounded to this source system before.
    Best regards,
    Peter

  • MySQL : works in the IDE, but not when i launch the webapp

    Hello,
    when i setup a mysql connection, everything seems to be ok in the IDE, i can see my datasource, i can open my tables, see the content, etc. But when i click on the green arrow to deploying and testing my webapp, the server returns me a very long error page : javax.faces.FacesException: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: com.mysql.jdbc.Driver
    What should i do ?
    thanks.
    PS : the entire error page is here, http://gpglinux.free.fr/error.html

    Hello,
    Can you give me the full path to where you placed the mysql jar?
    I just installed 6.1 and it is confusing in its directory structure.
    Thanks
    Frank

Maybe you are looking for

  • PDF Printing Issues in R12

    We have setup the PASTA drivers and have run into issues printing. We are running AIX 6.1 If we use pdf2ps the PDF documents will not print if we are using a MICR font. If we print other reports (no MICR) it prints out fine. If we use xpdf the PDF do

  • What is the DW CS3 license ?

    Hi there, I am a single programmer/web developer. Who has a workstation as my main computer and a notebook for when visiting client's and travelling. With the CS3 products requiring activation, am I permitted to install on both my computers ? TIA - D

  • Compile of forms on Oracle 11g database Rel1 very slow

    I think the following statement is causing the issue : SELECT COUNT (*) FROM ALL_OBJECTS WHERE ( OWNER = 'SYS' AND OBJECT_NAME = 'DBMS_JAVA' AND OBJECT_TYPE = 'PACKAGE' AND ALL_OBJECTS.STATUS = 'VALID' ) OR ( OWNER = 'SYSTEM' AND OBJECT_NAME = 'ORA_D

  • HT2538 I get nothing but a grey screen at startup

    When I turn on my 2008 iMac, I get nothing but a grey screen . . . put in the rescue disk (and held down the "C") and got the Apple logo and the little spinning think, but then to black screen?  What to do?  What is causing this?

  • Premiere CC crash while playing and zooming timeline

    Regularly crashing Premiere CC now while playing back the timeline, I zoom in and out on the timeline using my +/- hot keys and Premiere CC will crash.  I hate to say it but Premiere is starting to become unstable like my prior copy of Sony Vegas Pro