POL-4800

Hi to all,
I have a device (win32) which is not able to sync (using msync for example) because he has this error:
POL-4800
If I try to de-install and re-install oracle lite the problem continue to exist.
How can I solve this problem?
thanks for all
francesco

error is server side, rather than client side which is why the re-install does not work (there are similar errors like 'slot deleted' in the POL_32xx range that can be fixed by a re-install)
Problem is normally that there is an error in a publication item definition, so you first need to find out what it is
If you have not already done so, from the mobile manager go to data synchronisation>administration>trace settings and set the SYNC trace level to ALL, type to ALL and users to the problem user name. set the destination to file, file size to about 20 and files to 10 (if you are restricted on space may need to set them to lower).
Sync the user and you will get a number of trace files generated (data synchronisation>administration>trace files) in the format SYNC_username_number_fileid. ignore the .dat file for the moment (that is the data download), but open up the last file in the set and towards the botton you should find the error.
likely causes are
a) permissions problem preventing a read
b) CMP$ or CTM$ tables not set up
c) objects dropped in the main schema
d) re-publish failed to reset the user properly
e) problem with old version of upload tables
if only happening to one user d) or e) is most likely as all of the others would affect everyone. If just the one user, try resetting the user (go to users>select application>data subsetting and cut, paste and save one of the parameters) and then do a new build

Similar Messages

K8N Neo2 and X2 4800+ HT frequency?

Recently upgraded to the X2 4800+ processor, everyhting works fine. However, I saw somewhere that the HT bus on this guy is 2000 MHz, but the bios only has a 5X multiplier for the HT bus (ie 1000 MHz). Is this a limitation of the nforce 3 chipset or is something out of wack?

2000Mhz is double data rate of 1000Mhz.
Same thing.

Neo2 Platinum and X2 4800+ Wont POST

Alright, so I am have a really interesting problem that some of you may have possibly had or are having. I just upgraded my FX-53 (Revision CG) to a X2 4800+ (Revision E6) and I am having a issues getting to board to post. I just flashed my bios with the official v1.9 bios using the winflash utility, this caused no issues and my FX-53 works just fine with it. My 4800+ will work under the following conditions:
Condition 1: I lay the heatsink (Zalman CNPS7000B-Cu LED) lightly on the cpu without fastening it down and it will post, boot-up, and run stable for about 80% of the time.
Condition 2: I fasten the heatsink down and remove one of my 512MB memory modules from the purple slot, it will post, boot-up, and run stable.
If I place both memory modules in the dual-channel configuration with the heatsink fastened down, the system will not post. But thats not all, I also have tried another 4800+ (Revision E1) and a 4400+ (Revision E6) both of which would not even post with the heatsink unfastened/fastened, but they would both post, boot, and run stable with one of the memory modules removed from the purple slot.
The first thought that comes to mind is, bad memory? I doubt it. The memory run flawlessly with my FX-53 in all memory configurations. Another thought, is the CPU socket bad? This doesn't seem to make sense either, since my FX-53 runs well with it. However when the heatsink is fastened down, it is obviously flexing the board slightly, why would that cause a dual-core CPU to not post but let the FX-53 post?
I have noticed a slight high-frequency sound possibly coming from the inductor coils on the board. I speculate that the noise is coming from an increase in current--could this have to do with the board not wanting to post?
Any of you experts out there have any suggestions? Thanks.

Powersupply, unless defective, should be adequate.
It is probably not a great idea to run the cpu with a loose heatsink. Are you certain that there are no bent pins in your cpu? (That business about pressing down on it makes me nervous as there are static electricity dangers, etc.) Did you clear cmos properly and carefully (removing power cord, pressing start switch to discharge capcitors for 10 seconds, using jumper JBAT1 as described in manual, and then trying to boot again? Take a look at other posts with similar sounding problems and follow the troubleshooting procedures described, such as removing all nonessentail hardware starting with clearing cmos carefully, booting only with cpu, gpu and one stick of ram, etc., to isolate the problem.
Also do you have and use a D Bracket, and if so, report what it shows.
Hopefully some more people with greater expertise than me will take interest in your problem, but the specs of your system are going to make that harder for you than most.

Please help me regarding the law and telephone pol...

Hi guys this is my first post but I've been suffering for a few weeks with this matter and need some help from those in the know...
I had a new line put in to the house which is about 1m from the middle of the pair of semi detatched where I live.
The cable travels over my next door neighbours garden to the pole on the other side of the street at around 45 degrees.
They can open all the windows etc, it's over 3m high and doesn't pass over any buildings, but they have complained about the installation. I have had 3 or so visits from BT engineers who seem to want to move heaven and earth to keep my neighbour happy but don't seem so concerned with my opinion and I really don't want to move the cable to the other side of the house as all my cables enter on the same side and I don't want trailing wires across the render (plus it's not the point as theres a history between us).
I had another visit today saying that they are now looking at possibly installing a new pole outside my house for the cable which in my view is insane as there is another one about 10m away and I already have a bus stop outside my property.
Can anyone please help me to understand and advise on:
1. Where I stand in terms of having to move the cable.
2. If I have any grounds to object and prevent a new pole being sited outide my house (if he wants it outside the next door thats up to him).
3. Whether I can say even if a new pole is installed that I can still insist the cable remains in the original position.
4. Any other advice on how to make this harrassement stop without giving in to his bullying.
If anyone has any help/guidance/legislation to offer I'd really appreciate it as it's really upsetting both me and my elderly mother who I live with.
Thanks guys.

pete-r36 wrote:
Hi guys this is my first post but I've been suffering for a few weeks with this matter and need some help from those in the know...
I had a new line put in to the house which is about 1m from the middle of the pair of semi detatched where I live.
The cable travels over my next door neighbours garden to the pole on the other side of the street at around 45 degrees.
They can open all the windows etc, it's over 3m high and doesn't pass over any buildings, but they have complained about the installation. I have had 3 or so visits from BT engineers who seem to want to move heaven and earth to keep my neighbour happy but don't seem so concerned with my opinion and I really don't want to move the cable to the other side of the house as all my cables enter on the same side and I don't want trailing wires across the render (plus it's not the point as theres a history between us).
I had another visit today saying that they are now looking at possibly installing a new pole outside my house for the cable which in my view is insane as there is another one about 10m away and I already have a bus stop outside my property.
Can anyone please help me to understand and advise on:
1. Where I stand in terms of having to move the cable.
2. If I have any grounds to object and prevent a new pole being sited outide my house (if he wants it outside the next door thats up to him).
3. Whether I can say even if a new pole is installed that I can still insist the cable remains in the original position.
4. Any other advice on how to make this harrassement stop without giving in to his bullying.
If anyone has any help/guidance/legislation to offer I'd really appreciate it as it's really upsetting both me and my elderly mother who I live with.
Thanks guys.
Hi Pete.
Not sure about existing cables, but i am sure they would need your neighbours permission to cross over his land.
Michael (ypt) might come in here. he lives about 30ft from his nearest pole(second house away) Apparantly the original neighbour on the new builds gets his line from this pole but refused permission for the cable to go over his land to others, so for his property (about 30ft from the pole) it goes across the road to another pole, then down the road for about 100ft to another pole, and from there goes back across the road to his house.
Stupid I know.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Epson 4800 Ethernet IPP Network Cant Add PRINTER SETUP UTILITY

Greetings!
Any known issues?
Does anyone have this working??
I am having a time TRYING to ADD a new Epson 4800 printer, Epson Ethernet card onto new Mactel laptop and new quad G5 (both 10.4.7).
Epson NetConfig Utility sees the printer and set an IPP address.
However, Apple PRINTER SETUP UTILITY Add IP printer isn't working.
I had qualified Epson support taking me through the steps...he said some issues with the Intel books, but that doesn't explain why the G5 isn't working.
Three hours yesterday and I'm back on it later today...any tips/info appreciated.

Hi all,
I recently bought an Epson Stylus DX4850 and I'll be damed if I get the thing installed on my Intel based Mac! This is driving me mad, I've been told that it is compatable. I've downloaded all the drivers from the Epson website but when I go to add the printer it's not listed. Does this mean that I need to use a different driver or gimp driver?
Any help would be greatly appreciated and would prevent me from going insane!
Many thanks, Jon
Mac OS X - Intel Mac OS X (10.4.7)

Update error: POL - 4008 null buffer for attribute is not allowed

I am attempting to update a column in my Oracle Lite database through JDBC.
The statement is:
ds = getDataSource();
conn = getConnection(ds);
stmt = getStatement(conn);
int results = stmt.executeUpdate("UPDATE SYSTEM.PM_PASSENGERS SET CURRENT_STATUS_EVENT_ID = 267 WHERE PASSENGER_ID = 1");
System.out.println(results+" rows affected.");
conn.commit();
which results in the message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 rows affected.
[POL-4008] null buffer for attribute is not allowed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I am not sure what that means exactly. Does that mean there is some problem with the commit?
Thanks,
Allen

Is it necessary to update the entire record in Oracle Lite, or should it be possible to update select columns only when performing an update query?
Thanks,
Allen

Windows 7 / Server 2003 Roaming profile synchronization error at logoff (ntuser.pol)

Hi all,
I have implemented Roaming Profiles for a few test users on Windows 7 PC's (Windows Server 2003) and everything is working well aside from one error I'm seeing at logoff ('Your roaming user profile was not completely synchronized. See the event log
for details or contact your administrator.')
The event log reveals event ID's 1504 and 1509. 1504 is flagging the fact that Windows cannot update the roaming profile completely. 1509 shows the following:
'Windows cannot copy file C:\Users\jtest\ntuser.pol to location \\server\Profiles$\jtest.V2\ntuser.pol. This error may be caused by network problems or insufficient security rights.
DETAIL - Cannot create a file when that file already exists.
Other observations:
This issue occurs with all test users upon each logoff attempt except for the very first logoff, where there is no network share copy of ntuser.pol to get in the way.
Prior to logoff, the network share copy of ntuser.pol has an older timestamp than the local copy. This is not a cause or symptom but it leads me to believe updating the network copy of the file at logoff is normal/required behavior.
If I delete the network share copy of ntuser.pol prior to logoff the error does not occur. I don't suspect file permissions are the cause since I used the same user having difficulty logging off to delete the network share copy of the file.
ntuser.dat has no problem overwriting itself upon logoff.
I was able to repeat the problem with two windows 7 clients.
I've been all over the usual suspects (i.e. group policies affecting roaming profiles, file/folder permissions, installed every hotfix relating to roaming profiles and folder redirection, and googled every keyword) and came up empty. I confirmed offline
caching for the profile share is disabled.
Does anyone know what may be going on here? I'd greatly appreciate a point in the right direction. Thanks in advance.

You could too run a process monitor to watch what happen. With filter you can easilly configure it on the server to not log everything except read|write on the profile.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Mercury playback is always greyed out in Quadro FX 4800 + GTX 260

Hi guys,
As the title mentioned above, I have two cards installed on Win 7 64-bits. The Quadro FX 4800 is for main video card, and the GTX 260 is for the Physx only. I tried to manully assign the Physx to FX 4800 but it didn't work. Could you guys please advise me what should I do? Thanks in advance.
Best regards,
Margirbee

If you have the Nvidia 258.xx or higher Nvidia drivers, then there is a CUDA GPU listing under manage 3D settings. There is a global selection and individual application setting for that. The default setting for that is all GPU's. Select that under the Global and uncheck the 260 GPU. That should fix the problem.
Eric
ADK

Using Logic Pro 9 and Tascam DM-4800. Can't get the Tascam to work as a control surface via firewire... any help would be appreciated! Thanks!

The DM-4800 and Logic see each other, the firewire shows as 'locked' on both. Can pass audio back and fourth, no automation from the Tascam though. I know its either a midi setting or control surface settings... but I'm stumped. Newbie at Logic here. Any ideas what to check? Thanks in advance!

Plug in the usb lead.

Problem with Pole zero analysis using multisim

Problem with Pole zero analysis using multisim
When I tried to find input impedance function's pole zero of a parallel LC network using Multisim
pole zero analysis, I get following message
| | doAnalyses: matrix is singular
| |
| |
| | pz simulation(s) aborted "
The circuit as well as log file attached.
How to correctly perform pole zero analysis?
Solved!
Go to Solution.
Attachments:
Parallel LC.JPG ‏8 KB
parallel LC.txt ‏7 KB

dear sir,
thanks for your earlier reply to my question on pole zero analysis
one more problem on pole zero analysis ;
i tried to do pole zero analysis for circuit(shown in attached file where C1=1/6F(167mF) C2=5/18F(278mF) for which
z(s)= (s^2+9)(s^2+1)
s(s^2+4)
for which zeros are at +/-3j ,+/-1j
poles at 0 ,+/-2j as per theory:
But multisim gives different values (shown in attached file)
what is the problem?
please clarify.
thanks & regards
sagar vanarase
Attachments:
1portLC.JPG ‏219 KB

MSI 4800 se 8x (8900)

I just bought of course a MSI 4800 SE 8X (ms8900) Card installed hardware and when I went to install drivers they will not take.
Says "Bad Data"after installation of drivers and then "video card not installed properly there may be problems."
When I go to look at driver version there is no information displayed for it.
I have tried uninstalling old drivers and even tried it in safe mode.
Are there know issues of installing to (home)xp? what can i do to correct this.
this is supposed to work with a 4xagp board correct?
here are my specs
1.6 P4
80 gig western dig 8/mb buffer
asus P4b533
2 sticks of 256 ddr 2100 total (512)
350 powersupply
O/S XP (home)
Old Card was A (Leadtek GF3 TDH)now removed
PLEASE HELP!
Thank you for reading
also the update program does not seem to work as well.

Ntorres,
Since your MSI Product is a Vid Card and not a Motherboard and you posted in the nVidia/AMD/SiS Motherboard Forum, I moved the thread to Mutlimedia Forum for you.
Good Luck,
Richard

4800 SE VTD Problem tv-out

When i use tv-out (DualView) the image crash in the monitor and tv after some time (+- 10minutes), and i have to reset the computer.

Sorry, i am put more information .
About 10 minutes de screen show vertical bars and some garbage. i have to reset de computer.
Xpc Power Pack (St-450W)
+3.3V => 28A
+5V => 45A
+12V => 18A
+3.3V & +5V => 230W
+12V => 216W
-5V => 0.8A 4W
-12V => 1A 12W
+5Vsb => 2.5A 12.5W
******************** RESUMO DO SISTEMA ********************
Versão do Windows: Windows 5.1 Service Pack 1 (Geração 2600)
Tipo de computador: AT/AT COMPATIBLE
Versão do BIOS do sistema: KT400 - 42302e31
Data da BIOS do sistema: 09/02/03
Tipo de processador: x86 Family 6 Model 6 Stepping 2
Fornecedor de processador: AuthenticAMD
Número de processadores: 1
Memória física: 1024 MB
******************** INFORMAÇÕES DA UNIDADE DE DISCO ********************
Unidade A:
Tipo: Unidade de disquete de 3,5" e 1,44MB
Espaço total: 1.474.560 bytes
Cabeças: 2
Cilindros: 80
Setores por trilha: 18
Bytes por setor: 512
Unidade C:
Tipo: Unidade de disco fixa
Espaço total: 31.453.437.952 bytes
Espaço livre: 14.868.799.488 bytes
Cabeças: 255
Cilindros: 14946
Setores por trilha: 63
Bytes por setor: 512
Unidade D:
Tipo: Unidade de disco fixa
Espaço total: 91.473.305.600 bytes
Espaço livre: 12.049.399.808 bytes
Cabeças: 255
Cilindros: 14946
Setores por trilha: 63
Bytes por setor: 512
Unidade E:
Tipo: Unidade de disco fixa
Espaço total: 81.956.655.104 bytes
Espaço livre: 31.601.451.008 bytes
Cabeças: 255
Cilindros: 9964
Setores por trilha: 63
Bytes por setor: 512
******************** RESUMO DE IRQ ********************
Resumo sobre o uso de IRQ:
(ISA) 0 Timer do sistema
(ISA) 3 Porta de comunicação (COM2)
(ISA) 4 Porta de comunicação (COM1)
(ISA) 6 Controlador padrão de disquete
(ISA) 8 CMOS do sistema/relógio em tempo real
(ISA) 9 Microsoft ACPI-Compliant System
(ISA) 13 Processador de dados numéricos
(ISA) 14 Canal IDE primário
Relatório do resumo dos recursos - página: 2
(ISA) 15 Canal IDE secundário
(PCI) 16 NVIDIA GeForce4 Ti 4800 SE
(PCI) 16 Realtek RTL8139 Family PCI Fast Ethernet NIC
(PCI) 18 HighPoint HPT3xx ATA RAID Controller
(PCI) 19 Creative EMU10K1 Audio Processor (WDM)
(PCI) 21 VIA Rev 5 or later USB Universal Host Controller
(PCI) 21 VIA Rev 5 or later USB Universal Host Controller
(PCI) 21 VIA Rev 5 or later USB Universal Host Controller
(PCI) 21 VIA USB 2.0 Enhanced Host Controller

I recently received a pop up from 'euro-pol' asking me to pay money to unlock my safari.

I recently received a pop up from 'euro-pol' asking me to pay money to unlock my safari. I searched google on another computer and found it is quite a common malware issue. I found instructions of unlocking safari by resetting safari completely. Safari now works fine but I am frightened as I had student finance a banking details on my history etc. should I reformat and restore from backup? I am running mountain lion. I do have a windows partition, would this affect this? Should I not worry or what should I do? Please help...

This is not any kind of malware, it is purely a fraudulent javascript-based "scare tactic" which fools people into giving away their money. It stores nothing on your computer, nor does it have any access to your files or personal information.
As you've found, quitting Safari and restarting it with no windows open (hold down Shift as you launch it) will avoid reloading it.
So you have nothing to worry about in this regard.
Matt

4 Pole mini plug to 9 pin Mini DIN Adpater cable in Australia?

I have been trying to contact Creative Labs Australia about this particular adpater cable but i am only getting a reply saying that, only the manager knows about it so i have been leaving messages for him to contact me for the last 4 days!!!!!!!!!!!
Does anybody know where i can buy this cable in Australia? Creative part number is CB2032000002.
This cable is used to connect the Audigy2 Platinum Ex I/O Module to either DTT2500 or DTT3500 speakers using the the DIN connector. As the I/O Module doesn't have the DIN output i will need to use the 4 pole 3.5mm miniplug to be converted into 9 pin mini DIN.
Desperetely seeking this product. Can anyone help me please

If it makes you feel any better theres no where to buy this cable in the States either. Theres only 2 places I've found so far that sells this cable. One is creative which currently lists it as "out of stock" and this place:
http://www.globalsources.com/gsol/I/Mini-DIN-Plug/p/2000000003844/30000004968/bg/006604.htm
Only problem with that site is that it only sells the cable in lots of 3000, so you have to buy 3000 of them. If anyone knows of a place to get this cable please let me know as well.

4-pole Minijack-toRCA? (Digitally connect Audigy 2 SZ to Inspire 5500 speakerset)

Hello forum/Creative,
After searching and searching, I'm just confused. And I'm quite an audiophile and I know quite a lot about cable and connections. I still have a problem getting (Dolby) Digital from my Audigy 2 SZ card, to my Creative 5500 (Digital) speakerset. There's a couple "paradoxes" if you will so I hope someone (of Creative) can explain this to me.Because my situation is different than everything I read before.Now the "problem" is that the 5500 digital speakerset uses an external Dolby Digital decoder that is connected to the subwoofer by a DIN-to-DIN cable. Then there are the 3 minijacks (output) that connect from the decoder to the sub. (This also enable volume control per channel via the external decoder/remote) Then there's a coaxial (digital) input that goes from the decoder to any digital out source, which at first was at the coaxial out of my DVD player, which gave the Dolby Digital 5. channel sound as it should. No problem so far.But then I bought an Audigy 2 SZ card for my pc and the problems is that the Digital Out of this card is not a coaxial one, but a minijack output.Strangly however, the 5500 speakerset includes a minijack-to-rca cable, so I can connect the coaxial input on the decoder to the minijack digital out of the Audigy 2 SZ card. Then I got just front L/R channels. I realized the included cable was a 2-pole minijack, with one ground connection and audiostream (Front L/R) What I need is a 4-pole Minijack-to-RCA (. ground 2. Front L/R 3. Rear L/R 4. Sub/Center) , but I dumbfounded so far and I wonder if this cable even exists. After looking in the manuel again and checking the Creative forum and other audiofora, all I can see is a 4-pole minijack-to-DIN (digital din)Here'smy problem with that:st of all my external decoder is connected to the subwoofer via a DIN-to-DIN cable. So if I would get that 4pole Minijack-to-RCA my external decoder becomes nothing more then a nice piece of decoration. Since power from the sub goes to this decoder via the DIN cable (do I wonder if it's a Digital DIN at all)But since this decoder is also used to control volume (per channel) and has the infrared remote receiver + Dynamic Mode setting which can only be set via the remote, I would loose all these functions?I know the Audigy 2 SZ has it's own Dolby Digital (EX), DTS (ES) etc, but I don't want the soundcard output alone and not use the external decoder (again, since this decoder does more than just decode alone).Now a 4-pole Minijack-to-RCA would solve all these problems and I REALLY hope these exists. (Should be possible at least).Currently I have unplugged the 3 minijacks-to-minijacks from the external decoder and plugged them into my Audigy 2 SZ card for Analog Surround. But it doesn't sound good (well at least compared to real Dolby Digital) and via this setup I lost volume control (per channel) functionallity of the external decoder.So please help me out on this. I would really appreciate it.Regards,Felix.

P.S. The 4pole Minijack-to-RCA I mention is a female RCA connector to accept the male-to-male coaxial RCA cable. I also noticed the Audigy 2SZ Quick start manual states to hook up 5. digital speakers to use a 4pole minijack-to-4pole minijack, but this is impossible since there is only a coaxial input and minijack output.So a minijack-to-minijack cable is completely wrong. After (again) checking my Inspire 5500 user's guide, I noticed ONLY THIS manual has the ONLY correct solution to hook up the set. The aformentioned 4pole minijack-to-RCA (female).Creative, why do you supply a useless 2-pole minijack-to-RCA for the digital connection of the Inspire Dolby Digital 5500 speakerset instead of the 4pole one?I mean, you buy the Dolby Digital set to get real Dolby Digital sound, but to get that from your own Audigy (2 SZ) card, you need another cable!! (and when you get it, the other cable will never be used for anything else, since it can only transfer the Front L/R signal!!
Message Edited by Felix2 on 0-09-2006 05:43 PM

POL-4800

Similar Messages

Maybe you are looking for