Pol-5174 Connection doesn't exist

I have one PDA for multiple users. So on my mobile server, i publish my application and attach users.
When i do the first synchronization with user1, no problem, the db is created.
But after that, i want to do a synchronization with user2, and then an error occurs : POL-5174 Connection doesn't exist.
What's the problem ? Isn't possible to synchronize a PDA with different users ?

I registered a tar -> 4884342.993 but do not have an answer yet.
An interesting aside is I uninstalled the oracle lite PPC2003 ARMV4 Version 10.2.0.1.0 client.
I then put the oracle lite PPC2003 ARMV4 Version 10.0.0.0.0 client on the pda
and synced to the 10g r2 server and it works. I can sync both users and get the
appropriate data for each user.
I then put the client PPC2003 ARMV4 Version 10.2.0.1.0 client back on and now
get the famous pol-5174 error.

Similar Messages

HT201356 I have accidentally deleted my alternate iCloud (email) address. Are there any possibilities to retrieve it back because my iPad is connected to that email address, and now, I can't log out from it on my iPad, because it doesn't exist?

I have accidentally deleted my alternate iCloud (email) address. Are there any possibilities to retrieve it back because my iPad is connected to that email address, and now, I can't log out from it on my iPad, because it doesn't exist.
I have alternate icloud email attached to my iPad and I accidentally delete it from appleid.apple.com. And now I can't log out that iCloud account because it doesn't exist and it can't recognize my password.

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Where is sign when you call international number, but first you call local number and after connect open keyboard and see that sign doesn't exist only 0

Where is sign when you call international number, but first you call local number and after connect open keyboard and see that sign doesn't exist only 0

No that is not work. Try to call some number and when is connect click on keyboard and you can see that sign "+" doesn't exist.
So I use local number, when I'm connect I have option to call international number but like "+3193675xxxx" how I can put?
Before on iOS 6 I do it.

Oracle not Available, Shared Memory realm doesn't exist

Hi,
I have problem during XE installation on Windows 2003 R2 SP 2 Enterprise edition. I have uninstall the oracle xe and the result still the same. Finally I uninstall the windows and start all over again, surprisingly the result still the same. FYI, we normally has no issue during installation because this is part of our system we sell to our customer which require oracle xe. This is the first time we have seen this issue.
ORA-01034 : Oracle Not available
ORA-27101 : Shared memory realm doesn't exist.
Oracle XE and listener services is started in the windows services.
if we try to do startup the following message occured.
SQL> connect /as sysdba
Connected to an idle instance.
SQL> startup
ORA-44412: XE edition memory parameter invalid or not specified
SQL>
I can send you the oracle_xe log, init ora, and OpsBuildAll.log to create the database.
When we compare with the working installation, we saw that the size of oraclexe folder is less, it's just 233MB while the working one is over 1GB. After investigation, found out that the .dbf files is not avaiable in the oradata folder, i have tried to copy those files from the working one but the problem stay the same, probably there are a lot of files more missing.
Appreciate your help on this.
Thanks,
Agus

Hi,
Please find the log below
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-44412: XE edition memory parameter invalid or not specified
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
declare
ERROR at line 1:
ORA-01034: ORACLE not available
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Connected to an idle instance.
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
I have css log as well if you are interesting to see.
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 14:13:29 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5308M/6133M, Ph+PgF:7152M/8000M, VA:1933M/2047M
Tue Mar 20 14:13:29 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:30 2012
Starting ORACLE instance (normal)
Tue Mar 20 14:13:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:43:31 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5351M/6133M, Ph+PgF:7150M/8000M, VA:1932M/2047M
Tue Mar 20 19:43:31 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Tue Mar 20 19:55:39 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5254M/6133M, Ph+PgF:7052M/8000M, VA:1932M/2047M
Tue Mar 20 19:55:39 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:23:41 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5259M/6133M, Ph+PgF:6894M/8000M, VA:1932M/2047M
Wed Mar 21 05:23:41 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:29:12 2012
Starting ORACLE instance (normal)
Wed Mar 21 05:31:42 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 05:50:45 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5143M/6133M, Ph+PgF:6768M/8000M, VA:1932M/2047M
Wed Mar 21 05:50:45 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:02:38 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:04:03 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5205M/6133M, Ph+PgF:6866M/8000M, VA:1944M/2047M
Wed Mar 21 06:04:03 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:00 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6837M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:00 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:11 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5195M/6133M, Ph+PgF:6836M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:11 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:06:40 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6832M/8000M, VA:1944M/2047M
Wed Mar 21 06:06:40 2012
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Mar 21 06:07:18 2012
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5191M/6133M, Ph+PgF:6831M/8000M, VA:1932M/2047M
Wed Mar 21 06:07:18 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:07:38 2012
Shutting down instance (abort)
Wed Mar 21 06:07:51 2012
Starting ORACLE instance (normal)
Wed Mar 21 06:13:31 2012
Starting ORACLE instance (normal)
I have finished installing the XE on windows but result is the same, dbf file is not created on oradata folder.
Thanks,
Agus

Wired connection doesn't work if cable is not plugged in at boot time

Hey all,
I started using arch a few days ago and I simply love it, but I have a problem. The wired connection doesn't work if the cable is not plugged in at boot time, or if it was plugged in at boot time, then plugged out and in again. Switching it off and on again via the gui has the same effect. I am using NetworkManager with dhcpcd, NetworkManager is started via systemd, dhcpcd is not, I let NetworkManager do that. When I started investigating this problem there were some remnants of netctl, but now NetworkManager is the only networking-related service started at boot time. When the cable is plugged back in, NM-applet shows that it's connected, and an IP address is assigned, but the connection doesn't work.
Here's some information regarding the system:
It's a lenovo G50-70 laptop, it uses the r8169 driver for ethernet. (I dualboot it with windows 8.1, but arch is default and all this stuff happens also if i only use arch)
The router is a Linksys EA2700/N600
journalctl -u NetworkManager
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> NetworkManager (version 0.9.10.1) is starting...
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> WEXT support is enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkMan
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/Bokros
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/1. vezetékes kapcsolat
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/UPC1838142
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/iee
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC20
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WiFi hardware radio set enabled
aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WWAN hardware radio set enabled
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiFi enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WWAN enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiMAX enabled by radio killswitch; enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Networking is enabled by state file
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): link connected
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): carrier is ON
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): carrier is OFF
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): new Ethernet device (driver: 'r8169' ifindex: 2)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): exported as /org/freedesktop/NetworkManager/Devices/1
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka systemd[1]: Started Network Manager.
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): using nl80211 for WiFi device control
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): driver supports Access Point (AP) mode
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/2
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): preparing device
aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> use BlueZ version 5
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> wpa_supplicant started
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: starting -> ready
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
aug 26 19:14:42 arch_daboka NetworkManager[527]: <info> startup complete
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Auto-activating connection 'Bokros'.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) starting connection 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTING
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless): connection 'Bokros' has security, and secrets exist. No new sec
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'ssid' value 'Bokros'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'scan_ssid' value '1'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'psk' value '<omitted>'
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: set interface ap_scan to 1
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: inactive -> authenticating
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: authenticating -> associated
aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireles
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 3599
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:01 arch_daboka dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: version 6.4.3 starting
aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:01 arch_daboka dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
aug 26 19:15:02 arch_daboka dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:02 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> address 192.168.1.137
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Policy set 'Bokros' (wlp2s0) as default for IPv4 routing and DNS.
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) successful, device activated.
aug 26 19:15:14 arch_daboka dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:14 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: no IPv6 Routers available
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): link connected
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 4
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Auto-activating connection '1. vezetékes kapcsolat'.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) starting connection '1. vezetékes kapcsolat'
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) scheduled...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) starting...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: prepare -> config (reason 'none') [40 50 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) successful.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) scheduled.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) complete.
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) started...
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: config -> ip-config (reason 'none') [50 70 0]
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 4322
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) complete.
aug 26 19:15:34 arch_daboka dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: version 6.4.3 starting
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed nbi -> preinit
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: soliciting an IPv6 router
aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed preinit -> reboot
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> address 192.168.1.138
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> lease time 86400
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) started...
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) complete.
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Policy set '1. vezetékes kapcsolat' (enp1s0) as default for IPv4 routing and DNS.
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) successful, device activated.
aug 26 19:15:47 arch_daboka dhcpcd[4322]: enp1s0: no IPv6 Routers available
aug 26 19:15:47 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: no IPv6 Routers available
ping -c 10 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=4.38 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=2.79 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=4.89 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=5.30 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.59 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.61 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=4.37 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.40 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=6.47 ms
--- 192.168.1.1 ping statistics ---
10 packets transmitted, 9 received, 10% packet loss, time 9014ms
rtt min/avg/max/mdev = 1.599/3.759/6.471/1.627 ms
ping -c 100 8.8.8.8 - it's not completely disconnected, but it's always 8 packets at once that are received
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=20 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=21 ttl=46 time=40.0 ms
64 bytes from 8.8.8.8: icmp_seq=22 ttl=46 time=38.8 ms
64 bytes from 8.8.8.8: icmp_seq=23 ttl=46 time=39.3 ms
64 bytes from 8.8.8.8: icmp_seq=24 ttl=46 time=41.8 ms
64 bytes from 8.8.8.8: icmp_seq=25 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=26 ttl=46 time=38.4 ms
64 bytes from 8.8.8.8: icmp_seq=27 ttl=46 time=38.0 ms
64 bytes from 8.8.8.8: icmp_seq=56 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=57 ttl=46 time=49.8 ms
64 bytes from 8.8.8.8: icmp_seq=58 ttl=46 time=40.2 ms
64 bytes from 8.8.8.8: icmp_seq=59 ttl=46 time=44.3 ms
64 bytes from 8.8.8.8: icmp_seq=60 ttl=46 time=38.5 ms
64 bytes from 8.8.8.8: icmp_seq=61 ttl=46 time=43.4 ms
64 bytes from 8.8.8.8: icmp_seq=62 ttl=46 time=39.2 ms
64 bytes from 8.8.8.8: icmp_seq=63 ttl=46 time=40.5 ms
64 bytes from 8.8.8.8: icmp_seq=92 ttl=46 time=38.3 ms
64 bytes from 8.8.8.8: icmp_seq=93 ttl=46 time=43.7 ms
64 bytes from 8.8.8.8: icmp_seq=94 ttl=46 time=42.3 ms
64 bytes from 8.8.8.8: icmp_seq=95 ttl=46 time=46.6 ms
64 bytes from 8.8.8.8: icmp_seq=96 ttl=46 time=44.9 ms
64 bytes from 8.8.8.8: icmp_seq=97 ttl=46 time=42.9 ms
64 bytes from 8.8.8.8: icmp_seq=98 ttl=46 time=41.7 ms
64 bytes from 8.8.8.8: icmp_seq=99 ttl=46 time=37.8 ms
--- 8.8.8.8 ping statistics ---
100 packets transmitted, 24 received, 76% packet loss, time 99062ms
rtt min/avg/max/mdev = 37.886/41.455/49.829/3.000 ms
cat /etc/dhcpcd.conf - I tried clientid instead of duid and disabling IPv6, but neither of those helped.
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
duid
# Persist interface configuration when dhcpcd exits.
persistent
# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit
# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
# Some interface drivers reset when changing the MTU so disabled by default.
#option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# Generate Stable Private IPv6 Addresses instead of hardware based ones
slaac private
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook lookup-hostname
#noipv4ll
#Disable IPv6
#noipv6rs
#noipv6
cat /etc/NetworkManager/NetworkManager.conf
[main]
plugins=keyfile
dhcp=dhcpcd
## Set static hostname
#[keyfile]
#hostname=foobar
## HTTP-based connectivity check
#[connectivity]
#uri=http://nmcheck.gnome.org/check_network_status.txt
I couldn't find anything else to append, but if there are other log or conf files or anything else, which would help solving the problem, I should put here, please tell me.

Try to use dhclient perhaps? Might I also suggest letting systemd deal with the dhcp issue and not NM. That may seem incongruous but it is possible NM is mis-handling the dhcp hand-off to the network card. I'm no guru but I got thinking about this when I saw this in your output:
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
It is very possible that I'm mis-interpreting this information so please take it with a boulder of salt.

The Cube with ID = Rate doesn't exist in the collection Error Message

When doing a Full Optimization in the Rate cube I get a "The Cube with ID = Rate doesn't exist in the collection" error message. What is causing this error and how do I fix it?

I have seen this error when reporting services was not properly configured. can you connect to http://servername/reports ?
If not try to fix reporting services first, this solved the problem for me in the past.
But usually in this case all the aplications are giving this error when modifying. Is this also the case in your appset?
Does Apshell work when you modify the application there?
-Joost

Error while passing data to custom screen. Entry MUM doesn't exist in T001P

Dear All,
I have created a custom screen for PB10. I am getting below error while executing the screen.
Entry MUM doesn't exist in T001P (Check Entry) .
The detail error is
Entry MUM does not exist in T001P (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table T001P. The value or values ' MUM ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
I've checked the table and data is available. But still i am getting this error.
I've come across this error earlier while copying standard screen to custom screen.

The solution to this problem is you have to set your SET and GET parameter in the properties tab of the field.
regards,
sandeep

Error help- "the operation could not be performed ...file... doesn't exist"?

Hi,
I am experiencing some probmels with ICE and can't find a reason for why. I was able to edit the pages on the site through ICE about a month ago, but the client just let me know they can't do anything for any page. I also can't do anything for any pages I was able to previously edit. Basicall, I get this error message after being able to log in, edit page, and click save draft/ changes I get the following error:
"The operation could not be performed because the file can't be accessed or doesn't exist..."
I have looked extensively at these threads: http://forums.adobe.com/thread/444356?tstart=60
and http://forums.adobe.com/thread/432559?tstart=0
From that I have tried the following:
Made sure passive FTP was working properly
Verified FTP Dreamweaver connection with same FTP account: all is good and i can change and put the pages in question on the server.
Verified tags in page (I think I have most pages correct.- although I know some are still not div tagged correct, but don't think thee issues are related.)
verified that the directory settings on the adobe account (which is the root) is only "/"
Tried editing in both Safari and FF and the client tried in IE and FF (all most recent versions I think)
No progress has been made. Actually now my adobe account for managing my sites is not allowing me to manage "settings" for this site either. The tab is there but doesn't have the word settings on it and therefore I can't click it anymore
Here is the site: www.extremecommunitymakeover.org. I know for sure I WAS able to edit the index, get involved, and contact us pages a moth ago and now I get the error.
Also- another maybe related problem is that I can't actually duplicate or create new pages via ICE. Everything I try to name the new page gets kicked back and the dialog box says error says the "file extension is invalid".
So- I seem to have a couple problems possibly all related to each other and your help would be much appreciated.
Thanks,
Sean

Here's the setup on the two machines in particular...
Machine #1:
XP Pro
Was IE7, now latest FF
No antivirus
Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
Machine #2:
XP Pro
IE7
Again, No AV… had Kaspersky… but uninstalled it
Windows Firewall
Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
....STUMPED!!!

Can't connect AE to existing wireless network

I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
2. Opened Airport Utility and established a connection to the AE.
3. Renamed the AE and entered a password.
4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
5. In the "music" tab, I named the speakers and entered a password.
So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
Any ideas?

I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out.

Table doesn't Exist Error

Hi,
I have source as oracle database and target as HFM. However, I am facing issue in reverse engineering the RDBMS model. It doesn't show the table columns and gives the error "Table doesn't exist.".
I have tried creating a public synonym as well but to no avail.
Can anyone please suggest the suitable resolution?
Thanks
Abhi

Hi,
I added these keys but it is still not reflecting the columns. I tried with credential with DBA privileges but to no avail. The database connection is also getting connected with no hassles.
Please advice.
Thanks!

Business System doesn't exist in the SLD

Hi,
    Im trying to import XI content into the Integration directory. when i logged into Integration directory I clicked <i>Tools -> Import Configuration Objects</i>.
    Im getting a dialog window saying "Business System <Business system name> doesn't exist in the SLD.
   but when i gave t-code SLDCHECK in the PI system, i could see that business system as maintained in the SLD.
   also i could successfully import the XI content for Integration Repository.
   Any suggestion is highly appreciated
Thanks
Sourav

Hi ,
we have done a migration from AAIX to HPUX. I have performed some post installation steps as part of this.
   As partof this i have followed the post installation steps for PI usage type. I have changed some com.sap.aii parameters to reflect to the current target systems.
also *** a part of this i refreshed the CPAcache b giving the follwing URL http://<host>:<Java-Port>/CPACache/refresh?mode=full with login id as PIDIRUSER and password. but its gving something like below...
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://sapdxh:54000/CPACache/refresh?mode=full'. Line...
CPA cache refresh (mode=full) successfully executed in 62009 milliseconds.
^
so is this causing the problem or are there any connection parameters in XI profile to be looked at more spsecifically ??
please suggest as im not able to find out this error and its on high priority to solve.
Thanks
Sourav

Web Service Data Control option doesn't exist in JDeveloper

I have tried to find similar question but have not;
I am using JDeveloper 10.1.2.1 - after selecting Business Tier from a New Gallery dialog box, and then selecting Web Services, I am expecting to see the option "Web Service Data Control" but it doesn't exist. The only 2 options I see are "SOAP Server Connection" and "UDDI Registry Connection". Any ideas why I am not seeing this option. I tried installing the 11.1.2.1 JDeveloper but I see the same choices there too. Any guidance or ideas would be very much appreciated.

Thanks for the quick response. That was way to easy - I just didn't see that option. Thank you very much for pointing it out.
FYI - This worked on the 11.1.2.1 install but not on the ver10 install. As long as it works on one of them I am off and running. Thanks again.

ORA-01041: internal error. hostdef extension doesn't exist

hi all,
i am presently working on logical standby database
but i am facing a problem from primary database
" select * from V$ARCHIVE_DEST"
LOG_ARCHIVE_DEST_1 valid
LOG_ARCHIVE_DEST_2 ERROR ORA-01041: internal error. hostdef extension doesn't exist
at present database not synchronizing
please help
in alert.log file at primary
ARC9: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (1041)
ARC9: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
PING[ARC9]: Error 1041 when pinging standby 'standby server'.
Standby database is in running mode & well connected with network
Vaibhav
Edited by: Vaibhav Dixit on Oct 20, 2011 4:43 PM
Edited by: Vaibhav Dixit on Oct 20, 2011 4:43 PM

okkk
thanks for reply
i m also getting some problem in standby database in just 2-3 days
error is ->
ORA-03135: connection lost contact
LOG_ARCHIVE_DEST_2 ERROR ORA-01041: internal error. hostdef extension doesn't exist
then
i have passed some command on primary db & now it's working but i don't know it's good for db or not
ALTER SYSTEM SET log_archive_dest_state_2=’DEFER’ SCOPE=BOTH;
ALTER SYSTEM SET log_archive_dest_state_2=’ENABLE’ SCOPE=BOTH;
please give a idea to resolve this problem
regards
Vaibhav

[Solved]Boot from USB HDD - Root device doesn't exist. Major/minor

My problem is that the kernel seems (or starts) to load, but then I get an error:
Root device 'UUID=1234 . . .' doesn't exist.
Attempting to create it.
ERROR: Unable to determine major/minor number of root device "UUID=1234 . . .'
You are being dropped into recovery shell
I found a few links on the web and in the forums, but nothing that really solved it for me. The solved ones usually downgraded the kernel. I haven't done that yet. I thought I'd try here first.
I have a 320GB USB HDD that I have been using to experiment with different linux distros. I have a few working successfully (OpenSUSE,Mint,Ubuntu,Debian,Fedora,etc). I'm very new at this but have been reading a lot and putting a lot of time into it. I have legacy grub loaded on the MBR and use the menu.lst on my openSUSE partition to boot everything. Because the partitions for some of the distros are so far into the disk I needed to create directories on openSUSE's /boot directory to contain the kernel and initrramfs files (like /boot/fedora). This seems to work for the other distros. I did the same thing for Arch.
So when I installed Arch I haven't used the bootloader section of the installation.
I'm using the 2011.08.09-netinstall-i686.iso Live CD.
I tried a few things including:
1. changing the HOOKS in /etc/mkinitcpio.conf
a. adding usb to the "HOOKS"
b. removing and adding autodetect
c. adding and removing "sata_sil" (although I'm not even sure if my device uses it)
2. changing the kernel line:
a. from using "UUID=" to (hd0,1) to sdb1.
b. added rootdelay=8
3. repartition all of my arch partitions using cfdisk from my Live CD and reinstall. I used gparted on OpenSUSE to do it the first time.
This may be connected. When I fdisk -l from the Arch Live CD I get extra data and an error for each of my arch partitions (and only my arch partitions):
Disk does't contain a valid partition table
When I fdisk -l from OpenSUSE I don't get the data paragraphs or errors about the arch partitions?
Here is my /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=0e7556ef-b832-43e9-a8ba-c68dd2cd6143 /var reiserfs defaults 0 1
UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b / ext4 defaults 0 1
UUID=cd78ab04-742d-4ba5-9727-90727de2dd14 swap swap defaults 0 0
UUID=dc5685e3-35b0-46d4-b259-61f2530ff36a /home ext3 defaults 0 1
And my HOOKS:
HOOKS="base udev autodetect pata scsi sata usb filesystems usbinput"
And my menu.lst:
1
default 0
timeout 32
gfxmenu (hd0,1)/boot/message
###openSUSE on sda2 - legacy grub
title openSUSE 11.4 - Celadon - gnome
root (hd0,1)
kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 resume=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part1 splash=silent quiet showopts nomodeset vga=0x314
initrd /boot/initrd-2.6.37.6-0.7-default
###openSUSE failsafe on sda2 - legacy grub
title Failsafe -- openSUSE 11.4 - 2.6.37.6-0.7
root (hd0,1)
kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x314
initrd /boot/initrd-2.6.37.6-0.7-default
###floppy###
#title Floppy
# rootnoverify (fd0)
# chainloader +1
###Fedora on sda5 - legacy grub
title Fedora 15-Lovelock gnome
root (hd0,4)
configfile /boot/grub/grub.conf
###Mint on sda6 - grub2
title Mint 9 Lucid Lynx gnome
root (hd0,5)
kernel /boot/grub/core.img
savedefault
boot
###PCLinux on sda7 - legacy grub
title PCLinuxOS 2011.6 KDE
root (hd0,6)
chainloader +1
###Ubuntu on sda8 - grub2
title Ubuntu 10.04.2 gnome
root (hd0,7)
kernel /boot/grub/core.img
savedefault
boot
####arch on sda10 - legacy grub
title ARCH
root (hd0,1)
#root UUID=XXXXXXXXXX44c5a3cd-dcb5-4cf1-933e-7a8ebac2a992
kernel /boot/arch/vmlinuz-linux root=UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8
#kernel /boot/arch/vmlinuz-linux root=(hd0,9)
#kernel /boot/arch/vmlinuz-linux root=/dev/sda10
initrd /boot/arch/initramfs-linux.img
savedefault
boot
###Debian on sda11 - grub2
title Debian 6.0.2.1 squeeze gnome
root (hd0,1)
kernel /boot/debian/vmlinuz-2.6.32-5-686 root=UUID=2b6052e2-ecdf-4796-81c8-b9e9142ca159 ro
initrd /boot/debian/initrd.img-2.6.32-5-686
savedefault
boot
###Mandriva on sda12 - legacy grub
title Mandriva 2011 KDE
root (hd0,1)
kernel /boot/mandriva/vmlinuz-2.6.38.7-desktop-1mnb2 root=UUID=5033f7fb-cac7-4db5-920c-c8bd2b51365f ro
initrd /boot/mandriva/initramfs-2.6.38.7-desktop-1mnb2.img
savedefault
boot
Here is my fdisk -l from OpenSUSE. I'm not quite swift enough to mount the hard drive and use the script utility from the Live CD yet, at least not tonight:
Disk /dev/sda: 320.1 GB, 320072932864 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142447 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c3bbb
Device Boot Start End Blocks Id System
/dev/sda1 2048 4208639 2103296 82 Linux swap / Solaris
/dev/sda2 4208640 46153727 20972544 83 Linux
/dev/sda3 46153728 87113727 20480000 83 Linux
/dev/sda4 87115770 614031755 263457993 5 Extended
/dev/sda5 87115776 128075775 20480000 83 Linux
/dev/sda6 128077824 169037823 20480000 83 Linux
/dev/sda7 169039872 209999871 20480000 83 Linux
/dev/sda8 210001920 250961919 20480000 83 Linux
/dev/sda9 250963968 291923967 20480000 83 Linux
/dev/sda10 291924031 332886015 20480992+ 83 Linux
/dev/sda11 332888064 373848063 20480000 83 Linux
/dev/sda12 373848678 414992383 20571853 83 Linux
/dev/sda13 414994432 435474431 10240000 83 Linux
/dev/sda14 435474495 455956829 10241167+ 83 Linux
/dev/sda15 455958528 578881535 61461504 b W95 FAT32
/dev/sda16 578881599 614031755 17575078+ 83 Linux
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x95aa95aa
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 294889139 147444538+ 7 HPFS/NTFS/exFAT
/dev/sdb2 294889140 312576704 8843782+ 7 HPFS/NTFS/exFAT
That's it for now.
Last edited by newbie55 (2011-09-23 22:19:58)

I'm IN! Thanks everyone for your suggestions!
The arch system didn't like the identifier I was using for the root partition. By looking at the /dev/disk/by-id while the arch system was running, I could see what the system wanted me to call the partition. So after the system error'd-out and I was in the recovery shell at the [ramfs /] prompt:
# ls -lF /dev/disk/by-id > by-id.txt
# vi by-id.txt
I could have used any of the identifiers listed in the by-id (there were 3), by-uuid(1), by-label(1) or by path(1). I tried them all. I had to write these down by hand because it is a ram filesystem.
The article that finally got me there is:
https://wiki.archlinux.org/index.php/Pe … ice_naming
Anyway my openSUSE grub menu.lst ended up like this:
####arch on sda10 - legacy grub
title ARCH
root (hd0,1)
kernel /boot/arch/vmlinuz-linux root=/dev/disk/by-uuid/510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8 rootfstype=ext4
initrd /boot/arch/initramfs-linux.img
savedefault
boot
It's easy once you: 1. beat your head against the wall
2. read further
3. repeat 1 and 2
Back to the "Beginner's Guide",4 Post-Installation. Yikes!

[Solved] Boot error: /etc/rc.d/functions /etc/netcfg doesn't exist

Hi everybody,
Well, after a bit of playing around, wiki reading and trouble-shooting, i now have an automatic wireless connection at boot via netcfg2 and my wireless profile. Great stuff.
By the way, whoever wrote this: http://wiki.archlinux.org/index.php/Net … _netcfg_v2, you deserev a medal.
Anyway, to the problem. I get an error message at boot which informs me that there is an error in my /etc/rc.d/functions file at line 155, stating that /etc/rc.d/netcfg doesn't exist (which is correct).
However, when I look at the functions file, I cannot for the life of me see the problem.
Line 155 is: /etc/rc.d/$1 start
154 start_daemon() {
155 /etc/rc.d/$1 start
These are my daemons:
DAEMONS=(syslog-ng cups hal avahi-daemon sshd snmpd xinetd portmap netcfg net-profiles)
The obvious thing would be a problem with the netcfg daemon, but everything works ok, so go figure.
The only real reference i found was this:
http://www.archlinux.org/pipermail/arch … 03699.html
I'm fine with an optional dep - how about we throw a comment above
'NETWORKS' and have rc.sysinit throw a warning it NETWORKS is defined
but /etc/rc.d/netcfg isn't found?
Any help appreciated.
richs-lxh
Last edited by richs-lxh (2008-09-02 12:09:51)

Damn! I had a feeling it was going to be an easy one. I am pretty sure I tried that, oh well.
Thanks for the quick replies men. Thread marked as [Solved]
richs-lxh
Last edited by richs-lxh (2008-09-02 12:10:15)

Pol-5174 Connection doesn't exist

Similar Messages

Maybe you are looking for