Policies for URL's with question mark (?) in Access Manager 7.1.2
I have an environment with Access Manager 7.1 patch 2 and OpenSSO 3.0 Web Policy Agent (Apache). Apparently, with the 3.0 agents the wildcard * no longer matches the query string separator (?) in a URL accordining to Appendix C in the manual (http://download.oracle.com/docs/cd/E19681-01/820-5816/820-5816.pdf).
ie; http://AgentHost.com:8080/sampleapp/main.jsp?language=en&country=US.
The solution, is to add a policy similar to this - http://example.com:80/*?*, it requires a wildcard before and after the ?, but the ? must be specifically included.
My problem is that in AM 7.1 patch 2 it will not allow me to create a policy with that format, *?*. When I try, it says it is successful but when I view the policy the ?* is stripped off leaving only the first wildcard.
Has anyone delt with this issue? I am looking for a solution with Access Manager 7, upgrading to OpenSSO 8.x is not an option at this time.
Apply AM 7.1 patch3 or above, preferably the latest which is patch 5 or 6 (can't remember)
Similar Messages
-
MacBook Pro flashes file folder with question mark and startup manager will not run
My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?
Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.
-
Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!
Startup – Question Mark
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3) -
Macbook pro folder with question mark blinking appear whent I turn on, When I press the Option key Grey lock screen appear asking for a password, can anyone help me please?
Provide the computer's firmware password. If you don't know what it is, contact the person you got the computer from or Apple.
(91589) -
HELP! Getting Blue Q with question marks when visiting web sites
I see from the replies to similar posts that is is recommended to use the default settings under Advanced/ mime settings, in Quick time
I always had all boxes checked in all the categories as my preference would be to have Quick time play every thing. And encountered no problems .
I recently purchased flip4mac studio and now every thing is all messed up, web pages that used to work fine as far as saving content to my desk top or downloads folder, or copying and pasting urls, for sharing now work no more, I get the blue Q with the question mark as shown in these web sites I am completely hobbled as far as sharing my videos.
[Post Edited by Hosts due to adult content]
What are the correct settings for quicktime preferences ?
and please explain kiosk mode , I do have Macromedia flash player installed, and I guess Adobe, when I visit different sites with video, and I control click on the player I am able to tell which player is playing the media, only quicktime offers the save to my computer option, this is how I wound up with flip 4 mac, it was recommended to play content , I also just upgraded my safari to the beta version
iMac G5/G4 12 inch Power book Mac OS X (10.4.9)"What are the correct settings for quicktime preferences ?"
Make sure you have the latest versions of Adobe Flash Player Software
QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
Deactivate the "Flash Media" option.
This tells the browser not to to display Flash Media and lets the newly installed Adobe software work its magic.
==================
If the above thread doesn't help, try this...
Thanks to QuickTimeKirk........
Quit QuickTime.
Open User (Home)/Library/Preferences and delete any .plist file with QuickTime in its name. Don't worry as a new one will be created.
Open System Preferences/QuickTime and see if the window and tabs work as they should.
The following post should be helpful also: http://discussions.apple.com/thread.jspa?threadID=779076&tstart=0
===================
Since you are using Safari then I suggest that you check out Safari 2.0 Help Webpages aren't working (indicated by boxes with question marks)
"I recently purchased flip4mac studio"
Then you should contact Flip4Macs technical customer service and/or post in their forums if none of the above suggestions works out.
Flip4Mac Community Forum
Flip4Mac Support Center
Good luck! -
Small blue boxes with question marks
I was on a web site recently, and two white bunnies playing Badminton popped up over top of the web page. I accidentally click on them trying to move them out of the way, and I wound up on a strange web site in a foreign language. After closing that page and restarting Safari, some of the images and graphics were no longer displayed. Instead small blue boxes with question marks in the center of them are in place.
As well, I can no longer log on to my gmail account. It just fashes a bunch of stuff like this below, over and over and nothing displays.
Welcome to Gmail
Did something change on my Safari setup?
If anyone has any experience with this I could really use your help.
Thanks
<Edited by Moderator>Welcome To Discussions directordop!
Although not related to this Topic, you might find the info here How to post a link (URL) in "Apple Discussions", useful for future posts.
As a courtesy to the Discussions Hosts, if you implement that technique, there won't be a need for them to edit your links. This will alleviate their tedious workload.
ali b -
Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.
A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Hard drive crash? Folder with question mark
Hi everyone! I had problems with my macbook pro (early 2013). Last week, it slowed down suddenly and the laptop heats up during sleep. Then the hard drive recently crashed, at least I thought it crashed after it showed the folder with question mark during startup and did not show my old hard disk drive. Now I bought a 1TB WD mainstream hard drive disk, unfortunately it does not detect it in the internet recovery (disk utility). Now my question is, Do I have to do something with the hard drive first for my laptop to detect it? Like formatting it? The box said that it is compatible with mac OSx Lion, but my internet recovery lets me install Mountain Lion only. Is that the problem? or is the problem internal like the cable that connects the hard drive to the logic board?
That depends on the type of drive you have. If it is a standard external drive (in an enclosure) you can connect the drive with a USB cable.
If it is a bare drive like this:
You will have to put it an enclosure and get a usb cable. External drive enclosure are < $10. They come in two sizes, 2.5" and 3.5". Buy one that's correct for your drive. http://www.amazon.ca/MOGOI-Enclosure-External--Silver-Accessory/dp/B00HC107R6/re f=sr_1_5?ie=UTF8&qid=1404755872&sr=8-5&keywords=disk+enclosure -
Not solved with Blinking Folder with Question Mark after Erasing Hard Drive
Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true. -
Frequent startup with question mark folder icon--a diagnostic challange!!!
I recently obtained a 500 mhz G4 Cube; I transplanted memory, video board, video riser board, and DVD/CD drive from my old (dead) 450mhz G4 Cube (logicboard and DC-DC board were fried) to the 500 mhz Cube AND I added a Western Digital 80gb hard drive. The problem involves frequent startups with the question mark folder (Mac OS logo alternates with question mark).; Eventually the system folder is found and OS 10.4.11 starts up--sometimes in 20 seconds and sometimes in 3, 4, 5 minutes or longer..........I have tried 2 brand new batteries after numerous PRAM (via keyboard) and CUDA resets (depressing the CUDA button on the motherboard just once and then installing the new battery). The battery terminals in the Cube look perfect--no corrosion. With the new battery, startups were fine for a day but now 4 out of 5 times, I will get the question mark folder. Using Disc Utility, I fixed any errant permissions and the hard drive checks out with zero problems. Once running, the Cube works great, but these startups are maddening. One other issue; if I start up with the G4 Cube 9.1 installation disc, the install program DOES NOT recognize any bootable discs; whilst starting up using the Tiger Upgrade install disc, my 2 bootable discs (partitions of my Western Dig. hard drive) ARE recognized. Any ideas would be greatly welcome!!
I believe I have solved the problem regarding the question mark startup---> after rechecking all cable connections to HD, OD, and logic board, I revisited the jumper setup on the HD; it turns out that I set the HD up to be the MASTER, but what I should have done was set the HD to be the MASTER with attached SLAVE. Since reconfiguring the jumper, all startups have so far been normal. Also, I did install OS 9 drivers, but I the OS 9.1 install disc still does not recognized my 5 gig partition when starting up from the CD; this is minor in retrospect as I can still use the classic mode with a earlier version of OSX that does not hog so much disc space.
-
Blue icon with question mark instead of image in email
Sometimes I get a blue icon with question mark instead of image in email, when viewing in Apple Mail Program.
Does anyone know why?????I'm asking your thread get redirected to the proper forum. Please read this tip on how to post on Discussions for future threads:
http://discussions.apple.com/thread.jspa?threadID=1574700
Is this issue with Tiger or Leopard? Your profile indicates you have a machine with Tiger, yet your signature of your post says you have Leopard.
Also, there is no such thing as a Powerbook Pro. Read the text under the screen to tell us exactly which model you have. MacBook Pro is the name given to Macs that are for the pro lineup of notebooks once Apple shifted to the Intel CPU.
Message was edited by: a brody -
Attachments in mail show up as squares with question marks
When I open the Mail program and the email has an attachment the attachment shows up as squares with question marks. Any help would be appreciated. Thanks
Take your screenshot, then reply to this message and click the camera icon in the editing window. Click the "Choose File" button and select the screenshot. If you don't know how to take a screenshot, search for that term in the built-in help.
-
Safari Image turns to Tiny Blue Box with Question Mark
Hi all,
I get tiny blue question mark a lot in Safari.
Many Website where i visit almost everyday, the images appear as "tiny blue box with question marks". My Firefox also fails to load the images and had the same problem with "tiny blue box with question marks". Before every site work fine. I have been searching through Google and many others search for almost 12 hrs for a solution to solve this problem but none of it really works out. Basically, I have tried everything, I just can't find and still not able to fix this issue in Safari and Firefox.
Is this a Safari 3.0.4/Firefox 2.0.0.9 problem, or is there some setting on my Mac wrong or is it a new virus recently?
If anyone has any solution to solve this problem, an very much appreciated...
CK Lee (From Thailand)Hi guys, I am also in Bangkok and working (I use the term loosely) with True. Like you, the images have not been loading over the weekend and I have been trying to track this down. I went through all the motions of restarting, clearing caches, etc., but that was no good.
On Saturday morning, I went into my office where I have access to another network (I don't usually use it as it is a bit flaky), but when I tried that, the images did load.
Back at home, I tried again and the blue squares reappeared. I checked some of my own web pages which also had the squares, but only selectively (images in the same directory were OK; those that were accessed via internal links were not). Using FTP I checked the website: images were all OK as were the links on the pages themselves.
As an experiment, I uploaded one image. When I tried the page again, the image appeared. I then uploaded both of the affected directories and the pages were back to normal after a couple of reloads. What this indicates to me is that the cache, either at True or upstream, has a problem.
I do think however that it is True as the other server I used would also access the CAT caches and they seemed OK.
A series of notes to the True helpdesk might jolt them into some action on Monday morning after they have had their starter coffee. I have had some success in the past with [email protected]
All the best. -
Since July on MacBook Pro facebook images, profile photos, cover photos are not loading. Only small blue square with question mark. Same thing in Safari, FireFox, Chrome. Everything is up to date including last version of Adobe Flash. And watching YouTube also a problem. Video is skipping, freezing for few seconds and jumps forward. At the same time on Toshiba with Windows Vista under the same account, same wi-fi connection everything works fine.
Please help with sugesstions to fix the issue.Seems like problem is solved but it might be temporarily. Anyway. Click on the image, it will open facebook photo browser. Image is not loading so right click on the blue box with question mark, save image as. It will start downloading but without any success since browser do not see the image. After this attempt refresh the page and close all tabs with facebook. Try to open facebook once again. For some reason after this weird actions all images displayed properly. Do not know for how long but now it works.
Maybe you are looking for
-
Can not open Events photos in iPhoto 9.5.1
can not open Events photos in iPhoto 9.5.1
-
Hi All, Can we create the attestation process using API's? We have a requirement that if some event happen, then we can create some attestation process for the users impacting by this event and send this to reviewer. We have to create this attestatio
-
Multiple Details Sections in the same report
I'm trying to take two different columns from a fact table, and display them in one column on the report. So I'll then have the charge quantities (grouped and summarized) listed above the charge amounts (grouped and summarized) across months (columns
-
How to create a sequence in ABAP?
Hi guys, we have a requirement to create some data in a FM and every document must have a unique sequential number. How to achieve this? Numbering should be in a format 0009561544 (so 10 chars) and should start from 0001000000. One option would be to
-
How to change R/3 System ID & Client values for a Business System in ID
I am a beginner in PI or XI. I am trying to modify R/3 System ID & Client# under Adapter Specific Identifiers of a Business System in ID. But both are in output mode and I tried to modify in SLD and then resynch at ID level, but I could not find a pl