Polling with HTTPS (SOAP sender adapter)

Hi,
we are using SAP PI 7.1 EHP 1 and we have to set up a scenario, in which a business partner is going to send us IDocs over HTTPS.
Now our security team has objections, that incoming messages could be too risky. So we have to figure out if it's also possible, to set up a polling over HTTPS. Unfortunately there's no availability to insert an URL in the SOAP sender adapter, so I think it's NOT possible.
Any other ideas or agreements?
Thanks in advance,
Juergen

I think SOAP sender adapter supports HTTPS (w/ and w/o client certificate) ... But you'll need to complete the security setup (root CA, etc) before, and then give the "to-be-called" URL to yout partner.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
Rgds
Chris

Similar Messages

Set up https SOAP Sender adapter

Hello, I am doing the Webservice -- XI --   RFC
I have successfully configured the whole scenerio and it works when the SOAP Sender adapter is set to HTTP security
But when I set it to HTTPS without client auth or with I can not get it to work, I redid the wsdl entering in a url of https and get the following error
Wed Feb 27 11:02:56 PST 2008:ERROR:javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
   javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
        at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(Unknown Source)
        at com.sun.net.ssl.internal.ssl.AppOutputStream.write(Unknown Source)
        at java.io.BufferedOutputStream.flushBuffer(Unknown Source)
via soapui
Does anyone have any suggestions or documentation or success in successfully setting up the SOAP adapter to use https?
I also always reward points
Cheers
Devlin

have you checked that:
https://service.sap.com/sap/support/notes/891877
https://service.sap.com/sap/support/notes/856597
* Q: Can I use SSL for my sender adapter?
           A: Yes. Normally, the SOAP adapter servlet runs on the engines HTTP port. But you can activate the engine's HTTPS port so that this servlet can receive messages sent to the HTTPS port. See the documentation about the J2EE engine's security configuration.
/wg

HTTPS SOAP Sender Adapter Error

I have a SOAP client connecting to XI through HTTPS. SOAP Channel is configured to receive HTTPS request. We have been receiving messages successfully but the following error message occurs intermittently:
Error text from the Adapter Engine: java.security.AccessControlException: https scheme required
I don't see anything in SXMB_MONI. I don't see anything in RWB on the adapter message monitoring.
This scenarios is synchronous.

hi rodel,
You need to configure the HTTPS security level.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
regards
Ramesh P

Use Moduls with SOAP Sender Adapter

Hi Experts,
I have a question regarding the use of modules in the soap sender adapter / communication channel. Is it correct that the use of modules in the soap sender adapter is not possible?
the background of my question is that we use modules from SEEBURGER in our Communication channels for archiving incoming and outgoing documents. the use of modules in the soap receiver adapter is possible. why not in the soap sender???
according to the sap help it is possible to use the axis framwork in the soap adapter. then it should be possible to use modules. Is that correct? I tested it but it is not working. If I send a soap message (with the soap reveicer adapter) to the axis soap sender adapter there occure internal server errors. it is only working if I write my own modules for the axis soap sender adapter? is it not possible to use external modules like in other channels (File/FTP, soap receiver etc.)???
thanks and best regards!
Christopher

we have moduls from SEEBURGER. so I have to test it. but before I need a scenario with which I can test it.
We have a customer who sends xml-files per soap to us. these files we receive succussfully with the soap sender adapter. now we want to use some modules. so we have to use the axis soap sender adapter. I tried to send an xml file with the soap receiver adapter to the axis soap sender adapter, but this was not working. http 500 internal server errors occurred. is it possible that this scenario (soap-to-axis-soap) is not working? need I a specific configuration for this?
thanks and regards
Christopher

SOAP Sender Adapter gets error '(401) Unauthorized.'

Hi all,
we are using XI 3.0 and have a scenario with a SOAP Sender Adapter, which is using "HTTPS with Client Authentication". I have configured everything I have found on the forum at Visual Admin and Integration Directory:
Set the UME property ume.logon.allow_cert to TRUE in 'Service-->UME Provider'
Imported client certificate and root CA certificate to 'Service-->Keystore'
Created user with role role SAP_XI_APPL_SERV_USER
Assigned this user to the client certificate in 'Security Provider-->UserManagement'
Added the user to xi_adapter_soap_message and xi_adapter_soap_help in 'Security Provider'
Added the root CA in 'SSL Provider>Dispatcher>Client Authentication' and marked 'Request client certificate.
Added the user to BusinessSystem at tab 'Assigned Users'
Added the user to Sender Agreement at tab 'Assigned Users'.
Our business partner got a certificate of our server and the according PrivateKey is added to 'SSL Provider>Dispatcher>Server Identity'
Unfortunately, our server certificate is not verified by an root CA!!
When the business partner now browse the URL 'https://url:port/XISOAPAdapter/MessageServlet?channel=:BS_3RD_PARTNER:SOAP_SENDER&nosoap=true' on his system, he will get a 'Message Servlet is in Status OK'.
But when he tries to process the URL directly in his messaging system, he gets an error '(401) Unauthorized.'
Any hints what could be the problem between browing the URL in InternetExplorer and sending from the messaging system?
Does it really mean that authorization was successful, when getting 'Message Servlet is in Status OK' in the Browser?
How can I assign an user when not using ClientAuthentication?
I would be very thankful for every help...
Grtz, Juergen

Hi Satish,
could the user or password also be wrong, even if you get 'Message Servlet is in Status OK' when browsing the URL in the Internet Explorer? I would have seen this as a sign, that the user authentication works basically...
Is there a special place to store the password in the Visual Admin, or will the password be used, which is available in the SU01 ?
Grtz,
Juergen

HTTP Call to SOAP Sender Adapter

Hi All,
I'm working on a scenario where i plan to use SOAP Sender Adapter for receiving Plain HTTP Calls from the client.
The purpose behind this exercise is to have control over the message flow in case of sender HTTP protocol in XI.
I configured a SOAP channel and used the option 'DO Not Use SOAP Envelope'. But when i post the message to the adapter engine using a HTTP client, it fails.
Can somebody guide me in this case.
Regards,
Anurag

Hi,
>>>But when i post the message to the adapter engine using a HTTP client, it fails.
with which error ?
Regards,
Michal Krawczyk

HTTPS-based SOAP Sender Adapter

Dear all,
We're using NetWeaver 2004s SP12. I need to enable an HTTPS based SOAP sender adapter. According to online-help document at http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm, there should be a field "HTTP security level" to specify whether HTTPS is used. But I cannot find it in the communication channel configuration UI. Does anybody have any idea?
Thanks + Best Regards
Jerome

Hi
Just a try with this link am not sure ...
<i>If you want to specify security checks in the message header for the plain HTTP inbound channel, create a communication channel <b>for the party and service</b> in the Integration Directory.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm

Using custom http headers in SOAP sender adapter

Hi,
my problem is exactly the same as reported [here|Re: SOAP Sender - Extract Header Values;] and [here|Variable Transport Binding - Soap Sender;
Basically I'd like to send through the soap sender adapter some custom http headers. I check the necessary options in the advanced tab (set adapter-specific message attributes and variable transport binding), and in the variable header one I put x-StoreCode, which is the same http header I send to PI.
But I won't see anything in the dynamic configuration section when the message is persisted in PI.
Very surprised that I've seen this issue is a common problem others have faced before without success.
Thanks!

Hi Michal,
the extra info I'm trying to send separated from the message is an http header, not part of the query string.
If I incorporate the extra info as a parameter to the query string like this, for example:
http://host:50000/XISOAPAdapter/MessageServlet?senderParty=&senderService=S1&receiverParty=&receiverService=&interface=Int&interfaceNamespace=urn:test&x-StoreCode=13&nosoap=true
Then I can see the value in the dynamic configuration section:
<SAP:Record namespace="http://sap.com/xi/XI/System/SOAP" name="SQueryString">senderParty=&senderService=S1&receiverParty=&receiverService=&interface=Int&interfaceNamespace=urn:test&x-StoreCode=13&nosoap=true</SAP:Record>
But what I'm trying to do shoould be possible, according to sap help:
http://help.sap.com/saphelp_nwpi71/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm (section Define Adapter-Specific Message Attributes)

Use of variable header XHeaderName1 in SOAP sender adapter

Hi all,
I have a doubt regarding the use of adapter-specific attributes in SOAP sender adapter. In specific:
the SOAP client should be able to pass a variable with the SOAP request (XHeaderName1 header variable) and this should be available in mapping (Dynamic configuration)
I've already checked the [help page|http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm] but it seems I'm doing something wrong.
I tried with those settings in SOAP adapter configuration:
Keep headers checked
XHeaderName1 = Test
I try to call the SOAP adapters in the following 2 ways, but none works (the value is not available in message mapping with Dynamic configuration)
1. Pass "Test" value xxxx in SOAP Header as a tag
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Header>
          *<Test>xxxx</Test>*
     </SOAP-ENV:Header>
     <SOAP-ENV:Body>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
2. Pass "Test" value xxxx in SOAP URL
http://host:50000/XISOAPAdapter/MessageServlet?channel=p:s:c&version=3.0&Sender.Service=...&Interface=...&Test=xxxx
Could anyone give me a hint about how to pass those values in the SOAP call and eventually the correct config. of SOAP sender ?
Thanks a lot,
Manuel

Hi Manuel,
Could you give a bit more detail on how you handled the SOAP message yourself.
I have a similar issue. I am consuming a non SAP Web Service which requires a non-standard token element to be passed back. I have created a an RFC sender to SOAP reciever scenario which works fine for the inital logon and returns the token it expects in the follow up messages.
At present I'm at a loss so your help would be much appreciated. We have got round the immediate issue by creating and sending the SOAP message directly from SAP WAS.
Could we use the XI Adapter and ABAP proxy in a similar way?
Thanks,
Tim J.

Adapter Module in SOAP Sender Adapter

Hi All,
To Confirm, Is it possible to use Custom Adapter Modules in SOAP Sender Adapter. If so, where exactly custom module has to be placed in communication channel with respect to the standard bean of SOAP Adapter.
Thanks in advance.
Regards,
Sudharshan N A

Hi,
The sender adapter cannot be extended Check this
http://help.sap.com/saphelp_nwpi711/helpdata/en/43/951aceb1146353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/frameset.htm
Regards
Suraj

Using SOAP Sender adapter in PI 7.1

Hi Guys,
I've created a sync scenario with SOAP sender adapter, but I have troubles with calling it.
I use following URL: http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:BS_Bus_Sys:CC_SOAP_Test as I did in XI 3.0, but I'm getting error HTTP 400 Bad Request. I'm using the request generated from the IR Configuration.
Has something changed in 7.1 for this type of scenario?
Thanks guys,
Olian

Hi! Olian,
I think u r going in a wrong way. The above given URL is wrong and incomplete one.
The above url comes only after generating the WSDL. You ill gives that URL to ur source team to post their data at which this URL itselfs acts as an Gateway to enter into SAP XI/PI.
The generated WSDL contains URL like this>>
"http:// Host:Port/XISOAPAdapter/MessageServlet?senderParty=&senderService=Business Service&receiverParty=&receiverService=&interface=SenderInterfaceI&interfaceNamespace=http://XXXXXXXX" />
Also follow the below procedure for generating the WSDL.
Except generating WSDL remaining all development steps are same as creating File to Proxy Scenario.
CREATING THE WEBSERVICE IN XI :
1) In Integration Directory, go to Tools tab --> Define Web Services.
2) Now one Wizard window will opens and follow the below steps:
Here donu2019t go for the u2018 Proposed URLu2019, instead specify the URL as::
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=:<service>:<channel>
If there is party then ::
http://host:port/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>.
3) Specify the Source Messageu2019s Message Interface.and remaining other input parameters.
4) Specify the Sender Business Serviceu2019s details:
5) Here, Cross check the details displayed and then click on u2018Finishu2019 button to create the Web Service
document(WSDL)
6) Now Save the WSDL code to the local system. At the bottom u ill get URL based on the above input
URl:
Note: Here in XI there is no XML Testing tool or SOAP client tool to test SOAP messages. That is why most of the people prefer either ALTOVA XML SPY Tool or SOAP CLIENT TOOL or INFO PATH.
If your working on PI 7.1 means::
1) Simply after creating Sender Agreement go to options above to that sender agreement instead of tools menu... and there you can observe 2 options at the bottom side.
a) PUBLISH in SR
b) Generate WSDL.
2) Once after activating your ID componenets just Press or go for option Publish in SR. Then automatically it will generate WSDL and publish that WSDL in the SERVICE REGISTRY. which is latest concept in PI 7.1.
3) Now by entering authentification details you can able to enter into service registry.
There are 4 tabs::
a) Service definitions
b) Publish
c) classifications
d) Manage.
Go for Service definitions::
4) Enter your sender SOAP interface and press GO or enter.
5) Select your interface and then at the bottom u can observe again 4 tabs:
a) General b) End Points c) classifications d) System Details.
6) In the general you can able to see your WSDL URL by again entering Authentification details.
7) Now Click End Points>Test Button>Enter Authentification details-->Seelct your Interface
Note:: Now you can test your scenario in this WEB SERVICE NAVIGATOR.
8) There you can enter you can pass your Input data parameters in your SOAP interface and execute or test your scenario here itself without any using of external tool like Altova XML or SOAP client tool.
I hope the above information will give you a detailed information in generating and testing webservice right.
Regards::
Amar Srinivas Eli

SOAP Sender Adapter Not working

We have the following Synchronous sceanrio: Third Party System <> PI <> SAP ECC
The interface works well in our DEV and PreProd environments but has stopped working in our QA environment.
The SOAP Sender Adapter is giving me the following error:
failed to initialize: org.apache.axis.ConfigurationException:
java.lang.ClassNotFoundException: ------------------------- Loader Info -------------------------
ClassLoader name: library:com.sap.aii.af.axisproviderlib] Living status: alive Direct parent loaders:   system:Frame   library:com.sap.base.technology.facade   library:engine.j2ee14.facade] Resources:
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/axis.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-discovery-0.2.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-logging-1.0.4.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-net-1.0.0-dev.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/wsdl4j-1.5.1.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/xmlsec-1.4.0.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/wss4j-1.5.6.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/opensaml-1.0.1.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/xalan-2.6.0.jar
Currently the Quality of Service for the communication channel is set to "Best Effort" because it is a Synchronous Interface. However if I change the Quality of Service to "Exactly Once" the message is received by PI without any problems. So the problem is specific to Synchronous.
I tried to create a new communication channel and use that but that didnt help.
We have checked on the server and all the above mentioned .jar files are all in place.
I have compared the Processing Sequence and Module Configuration of the Module tab (for the communication channel) with the other environments and everything seems to be fine.
Any help would be much appreciated.
Thanks,
Krishneel

Hi Krishna,
ClassLoader name: library:com.sap.aii.af.axisproviderlib] Living status: alive Direct parent loaders:   system:Frame   library:com.sap.base.technology.facade   library:engine.j2ee14.facade] Resources:
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/axis.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-discovery-0.2.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-logging-1.0.4.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/commons-net-1.0.0-dev.jar
/usr/sap/XQ1/DVEBMGS01/j2ee/cluster/bin/ext/com.sap.aii.af.axisproviderlib/lib/wsdl4j-1.5.1.jar
Have you deployed the following Jar.
commons-discovery-0.2.jar
○       commons-logging-1.0.4.jar
○       commons-net-1.0.0-dev.jar
○       wsdl4j-1.5.1.jar
Refer this
http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm
Edited by: Debashish Roy on Jul 18, 2011 10:10 AM

How to use SOAP sender adapter

Hi all
i have configured the SOAP sender adapter. Now my 3rd party needs to send me a soap message.
I have checked that the status at the following URL is OK:
http://host:port/XISOAPAdapter/MessageServlet?channel=:MXII_Web_Service:SOAP_MXII_Sender.
This is fine, however
I am unsure of the following:
1. Does XI make a wsdl available to the 3rd party?
2. Where does my 3rd party send the soap message to?
3. Is the SOAP message sent via a query string?
4. Do I need to create a web service?
Thanks for all your help in advance
Clinton

Hi Moorthy
Thanks for your answer.
The problem was solved, we used .Net to write a webservice to our wsdl.
I have now another problem.... When the message comes into XI it shows that no receiver found(RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC). If I just test the scenario with a file adpter as Sender, and Receiver it is fine, but when using the SOAP adapter as Sender, it gives me the no receiver found message.
Any help with this issue will be appreciated.
Thanks again
Clinton

SAP PI Soap Send adapter is not available.

Hi Experts：
i encounter a issue when use Soap sender adapter. i configured soap sender adapter senario and generate wsdl in the id .
and then import wsdl document to the soapui to test the webservice. but throw some exception blow:
<!see the documentation>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>java.lang.NullPointerException
+     at com.sap.aii.af.sdk.xi.mo.xmb.XMBMessageOperator.getQualityOfServiceAsString(XMBMessageOperator.java:2109)+
+     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:943)+
+     at sun.reflect.GeneratedMethodAccessor1126.invoke(Unknown Source)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:585)+
+     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)+
+     at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)+
+     at $Proxy3087.process(Unknown Source)+
+     at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:275)+
+     at sun.reflect.GeneratedMethodAccessor518.invoke(Unknown Source)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:585)+
+     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)+
+     at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)+
+     at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)+
+     at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)+
+     at $Proxy330.process(Unknown Source)+
+     at com.sap.aii.adapter.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:175)+
+     at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:470)+
+     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)+
+     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)+
+     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)+
+     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)+
+     at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124)+
+     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)+
+     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)+
+     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)+
+     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)+
+     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)+
+     at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)+
+     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)+
+     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)+
+     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)+
+     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)+
+     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)+
+     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)+
+     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)+
+     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:457)+
+     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)+
+     at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)+
+     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)+
+     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)</text>+
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
nd the find a note :sapnote_0001239995 can solve the problem in the pi 7.10 .but my pi is 7.11 .anybody know which note should be apply to solve the problem in the pi7.11 .thanks .

hi,
Either you are using an incomplete URL
you can however try with this URL format:
http://<IPAddress OR ServerName>:<PORT_No>/XISOAPAdapter/MessageServlet?channel=:<SenderBusinessService>:<SenderSOAPCC>&version=3.0&Sender.Service=<SenderBusinessService>&Interface=<SenderInterfaceNamespace>%5E<SenderMI>
refer blog related ur issue:
ADAPTER.JAVA_EXCEPTION: Sender soap adapter PI 7.11
thanks,

Request Response Bean for SOAP Sender Adapter

Hi Friends,
Is it possible to use Request Response Bean Module described (FIle to RFC to File here) for SOAP(sender) and JDBC(receiver) adapter?
I want to configure SOAP to JDBC to JDBC scenario.
http://wiki.sdn.sap.com/wiki/display/HOME/UsingRequestResponseBeanModuleinFILE+Adapter
Scenario:
I will do SOAP adapter call Asynchronously and JDBC receiver adapter will select data from database. This response will go back to SOAP adapter and then SOAP will divert this response to another JDBC adapter. This JDBC adapter will insert data into another database.
I do not want to use ccBPM. Is there any design approach to implement this scenario?
Thanks,
Sandeep Maurya

Hi Sandeep,
SAP says SOAP sender adapter does not support Modules. You can serch Help.sap (for SOAP sender channel) to find the same.
I would suggest to use AXIS adapter (provides all the functionality of SOAP) and supports the Modules as well.
I have used the Module beans that you mentioned in the past... but it is not consistent with its processing.. sometimes it stucks with Message ID issue... I have seen same issue faced some other friends as well .. search on SDN you will find the issue with these modules...
Using BPM would be another option...
Thanks,
Sunil Singh

Polling with HTTPS (SOAP sender adapter)

Similar Messages

Maybe you are looking for