Pooladm: cannot enable pools: No such file or directory
I'm having a problem enabling pools in Solaris 10. I used a core installation and manually installed the SUNWpool, SUNWpoolr, SUNWzoner, and SUNWzoneu packages.
When I try to execute "pooladm -e" to enable pools I get the following error:
pooladm: cannot enable pools: No such file or directory
Also, when I enable the svc:/system/pools:default service it errors into maintenance state with the same error in the log file.
I believe the problem is related to the non-existance of /dev/pool, but I'm not sure why it is not there.
Here is the output from truss:
bash-3.00# truss -f pooladm -e
2753: execve("/usr/sbin/pooladm", 0xFFBFFC8C, 0xFFBFFC98) argc = 2
2753: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
2753: resolvepath("/usr/sbin/pooladm", "/usr/sbin/pooladm", 1023) = 17
2753: stat("/usr/sbin/pooladm", 0xFFBFFA68) = 0
2753: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
2753: stat("/lib/libpool.so.1", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libpool.so.1", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libpool.so.1", "/usr/lib/libpool.so.1", 1023) = 21
2753: open("/usr/lib/libpool.so.1", O_RDONLY) = 3
2753: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF370000
2753: mmap(0xFF370000, 93041, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF370000
2753: mmap(0xFF398000, 7097, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF398000
2753: munmap(0xFF388000, 65536) = 0
2753: memcntl(0xFF370000, 17100, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libc.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
2753: open("/lib/libc.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000
2753: mmap(0xFF200000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000
2753: mmap(0xFF2EE000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF2EE000
2753: mmap(0xFF2F6000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2F6000
2753: munmap(0xFF2DE000, 65536) = 0
2753: memcntl(0xFF200000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libxml2.so.2", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libxml2.so.2", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libxml2.so.2", "/usr/lib/libxml2.so.2", 1023) = 21
2753: open("/usr/lib/libxml2.so.2", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 1540096, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF080000
2753: mmap(0xFF080000, 1397070, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF080000
2753: mmap(0xFF1E4000, 72885, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1392640) = 0xFF1E4000
2753: mmap(0xFF1F6000, 2168, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F6000
2753: munmap(0xFF1D6000, 57344) = 0
2753: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF360000
2753: memcntl(0xFF080000, 202876, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libscf.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libscf.so.1", "/lib/libscf.so.1", 1023) = 16
2753: open("/lib/libscf.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF330000
2753: mmap(0xFF330000, 97095, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF330000
2753: mmap(0xFF358000, 4934, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF358000
2753: munmap(0xFF348000, 65536) = 0
2753: memcntl(0xFF330000, 20432, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libnvpair.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libnvpair.so.1", "/lib/libnvpair.so.1", 1023) = 19
2753: open("/lib/libnvpair.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000
2753: mmap(0xFF310000, 24206, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000
2753: mmap(0xFF326000, 1192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFF326000
2753: munmap(0xFF316000, 65536) = 0
2753: memcntl(0xFF310000, 7604, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libexacct.so.1", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libexacct.so.1", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libexacct.so.1", "/usr/lib/libexacct.so.1", 1023) = 23
2753: open("/usr/lib/libexacct.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF060000
2753: mmap(0xFF060000, 15042, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF060000
2753: mmap(0xFF074000, 888, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFF074000
2753: munmap(0xFF064000, 65536) = 0
2753: memcntl(0xFF060000, 3568, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libpthread.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libpthread.so.1", "/lib/libpthread.so.1", 1023) = 20
2753: open("/lib/libpthread.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00002000, 16384, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3EC000
2753: mmap(0xFF3EC000, 12032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF3EC000
2753: close(3) = 0
2753: stat("/lib/libz.so.1", 0xFFBFF520) Err#2 ENOENT
2753: stat("/usr/lib/libz.so.1", 0xFFBFF520) = 0
2753: resolvepath("/usr/lib/libz.so.1", "/usr/lib/libz.so.1", 1023) = 18
2753: open("/usr/lib/libz.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 139264, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF030000
2753: mmap(0xFF030000, 69442, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF030000
2753: mmap(0xFF050000, 6012, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 65536) = 0xFF050000
2753: munmap(0xFF042000, 57344) = 0
2753: memcntl(0xFF030000, 5032, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libm.so.2", 0xFFBFF520) = 0
2753: resolvepath("/lib/libm.so.2", "/lib/libm.so.2", 1023) = 14
2753: open("/lib/libm.so.2", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 786432, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF00000
2753: mmap(0xFEF00000, 693647, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF00000
2753: mmap(0xFEFB8000, 28592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 688128) = 0xFEFB8000
2753: munmap(0xFEFAA000, 57344) = 0
2753: memcntl(0xFEF00000, 33076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libsocket.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19
2753: open("/lib/libsocket.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF000000
2753: mmap(0xFF000000, 44594, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF000000
2753: mmap(0xFF01C000, 4277, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF01C000
2753: munmap(0xFF00C000, 65536) = 0
2753: memcntl(0xFF000000, 14320, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libnsl.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
2753: open("/lib/libnsl.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE00000
2753: mmap(0xFEE00000, 594942, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE00000
2753: mmap(0xFEEA2000, 33745, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFEEA2000
2753: mmap(0xFEEAC000, 23232, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEEAC000
2753: munmap(0xFEE92000, 65536) = 0
2753: mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000
2753: memcntl(0xFEE00000, 89508, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libdoor.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libdoor.so.1", "/lib/libdoor.so.1", 1023) = 17
2753: open("/lib/libdoor.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 81920, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFE0000
2753: mmap(0xFEFE0000, 3315, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEFE0000
2753: mmap(0xFEFF2000, 600, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 8192) = 0xFEFF2000
2753: munmap(0xFEFE2000, 65536) = 0
2753: memcntl(0xFEFE0000, 2240, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libuutil.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libuutil.so.1", "/lib/libuutil.so.1", 1023) = 18
2753: open("/lib/libuutil.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 106496, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEE0000
2753: mmap(0xFEEE0000, 26032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEE0000
2753: mmap(0xFEEF8000, 1882, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 32768) = 0xFEEF8000
2753: munmap(0xFEEE8000, 65536) = 0
2753: memcntl(0xFEEE0000, 6652, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: stat("/lib/libgen.so.1", 0xFFBFF520) = 0
2753: resolvepath("/lib/libgen.so.1", "/lib/libgen.so.1", 1023) = 16
2753: open("/lib/libgen.so.1", O_RDONLY) = 3
2753: mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
2753: mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEC0000
2753: mmap(0xFEEC0000, 22089, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEC0000
2753: mmap(0xFEED6000, 2303, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFEED6000
2753: munmap(0xFEEC6000, 65536) = 0
2753: memcntl(0xFEEC0000, 5656, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
2753: close(3) = 0
2753: munmap(0xFF3A0000, 8192) = 0
2753: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFD0000
2753: getcontext(0xFFBFF758)
2753: getrlimit(RLIMIT_STACK, 0xFFBFF738) = 0
2753: getpid() = 2753 [2752]
2753: setustack(0xFEFD2088)
2753: sigfillset(0xFF2F64D8) = 0
2753: stat("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", 0xFFBFF1B0) = 0
2753: resolvepath("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", "/platform/sun4v/lib/libc_psr.so.1", 1023) = 33
2753: open("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", O_RDONLY) = 3
2753: mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEDF0000
2753: close(3) = 0
2753: brk(0x00022448) = 0
2753: brk(0x00024448) = 0
2753: getprivimplinfo(0xFFBFF2E0, 2076) = 0
2753: sysconfig(_CONFIG_NGROUPS) = 16
2753: zone_lookup("") = 0
2753: zone_getattr(0, ZONE_ATTR_PRIVSET, 0xFEFD02C8, 12) = 12
2753: getppriv(PRIV_EFFECTIVE, {ffffffffffffffffffffffff}) = 0
2753: open64("/dev/pool", O_RDONLY) Err#2 ENOENT
2753: fstat64(2, 0xFFBFEC88) = 0
pooladm2753: write(2, " p o o l a d m", 7) = 7
: 2753: write(2, " : ", 2) = 2
cannot enable pools2753: write(2, " c a n n o t e n a b l".., 19) = 19
: 2753: write(2, " : ", 2) = 2
No such file or directory2753: write(2, " N o s u c h f i l e".., 25) = 25
2753: write(2, "\n", 1) = 1
2753: _exit(1)
All it took was running devfsadm and the errors were gone.
Similar Messages
-
Cp: cannot stat `/DISCARD/': No such file or directory
I am under process of applying HTTP server patches in our 11i environement, i am getting below error.
*** Starting rebuild for libraries and executables
rdbms/lib:ins_rdbms.mk:client_sharedlib,ioracle,utilities
make -f ins_rdbms.mk client_sharedlib ioracle utilities
/u01/oracle/ora/iAS/bin/genclntsh
cp: cannot stat `/DISCARD/': No such file or directoryHi,
cp: cannot stat `/DISCARD/': No such file or directoryThis error can be safely ignored.
Note: 388254.1 - cp: cannot stat `/DISCARD/': No such file or directory
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388254.1
Regards,
Hussein -
[SOLVED] mkfifo: cannot create fifo '': No such file or directory
Hi, I'm trying to get Bar working on bspwm but I'm getting an error whenever I try to load it.
mkfifo: cannot create fifo ‘’: No such file or directory
At first I fiddled with it a bit and it didn't work. I figured I was making some syntax errors or whatever but the example code gives me the same errors.
I've tried to read up on mkfifo but I'm a bit lost now. I hope someone can push me in the right direction. :)
Last edited by Mnk (2014-08-29 16:24:37)I'm guessing you are running the panel script without the PANEL_FIFO environment variable set, so the script is trying to open an empty file name.
Use the profile script to set the PANEL_FIFO variable, or set it explicitly in the panel script.
If this is not the problem, please provide more information about exactly what you are doing. -
The .keystore file now cannot be found (No such file or directory)
hi,
so, I'm trying to sign a JAR file connected to an applet.
I got to creating the keystore and had a "where do you want to store it? and what do you want to call it?" messages.
I saved it as '.keystore' and was warned by the system that files beginning with '.' are invisible.
I clicked ok (thinking the compiler should be able to 'see' it) and now whenever I try to sign anything the Terminal tells me:
jarsigner error: java.lang.RuntimeException: keystore load: /Users/spikenigma/.keystore (No such file or directory)
It doesn't matter how many other keystores I create, it looks for it in said directory and throws up an error.
I've tried everything
HELPOk, I'll be as specific as possible and maybe you can tell where I am going wrong. I am on a Mac.
1)
I have a JAR file called csvjdbc.jar . It is a driver that enables offline SQL operations of sorts on tabular data.
It works perfectly when loaded in the classpath both dynamically and at runtime.
The contents of it's manifest file are, as expected:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.1
Created-By: 1.6.0_22-b04 (Sun Microsystems Inc.)
2)
A test of csvjdbc.jar to check if it is already signed returns that it is not, as expected:
(input)
jarsigner -verify csvjdbc.jar
(input)
(output from terminal)
jar is unsigned. (signatures missing or not parsable)
(output from terminal)
3)
I want to sign the jar file so that I can load said JAR file in an applet I have not yet created.
4)
My steps are:
(navigate to the folder via the terminal)
cd desktop
cd progamming
cd java
etc….
(navigate to the folder via the terminal)
(try to sign the jar)
jarsigner csvjdbc.jar spikenigma
(try to sign the jar)
(response from terminal)
Enter Passphrase for keystore:
(response from terminal)
(entered passphrase)
************** (censored)
(entered passphrase)
(response from terminal as previously mentioned)
/Users/spikenigma/.keystore (No such file or directory)
(response from terminal as previously mentioned)
(Ok, let's create another keystore in a different location)
keytool -genkey -alias signFiles -keystore thekeystore
(Ok, let's create another keystore in a different location)
(answer standard questions)
Enter keystore password:
Re-enter new password:
What is your first and last name?
What is the name of your organizational unit?
What is the name of your organization?
What is the name of your City or Locality?
What is the name of your State or Province?
What is the two-letter country code for this unit?
(answer standard questions)
(so, we try signing again)
jarsigner csvjdbc.jar spikenigma
(so, we try signing again)
(enter the passphrase)
Enter Passphrase for keystore:
(enter the passphrase)
(response from terminal as previously mentioned)
jarsigner error: java.lang.RuntimeException: keystore load: /Users/spikenigma/.keystore (No such file or directory)
(response from terminal as previously mentioned) -
Sysctl: cannot stat /proc/sys/enable: No such file or directory sysctl
When attempting to use sysctl to enable or disable anything I get
sysctl: cannot stat /proc/sys/enable: No such file or directory
sysctl: cannot stat /proc/sys/wicd: No such file or directory
THIS HAPPENS ON BOTH MY DESKTOP AND LAPTOP
It happens regardless of what service I try to enable or disable
I checked the permissions/owner on both and it is...
Proc is dr-xr-xr-x root:root
and /proc/sys is dr-xr-xr-x, root:root
Any idea whats going on?
Google turned up nothing...
I'm sure I'm missing something simple...
Last edited by ShadowfoxXXX (2013-02-28 04:55:24)ShadowfoxXXX wrote:
When attempting to use sysctl to enable or disable anything I get
sysctl: cannot stat /proc/sys/enable: No such file or directory
sysctl: cannot stat /proc/sys/wicd: No such file or directory
THIS HAPPENS ON BOTH MY DESKTOP AND LAPTOP
It happens regardless of what service I try to enable or disable
sysctl is used to modify kernel parameters. If you are trying to enable/disable/start/stop services, then you'll need to be running systemctl.
Cheers
Patrick -
Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AMa step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed. -
/bin/cp: cannot stat 'a/b/c/* : No such file or directory error
When I attempt the following
String cmdCopy[] = {"cp'", "-r", "a/b/c/*", "."};
Process p = Runtime.getRuntime().exec(cmdCopy);
I get the following error
/bin/cp: cannot stat 'a/b/c/* : No such file or directoryIs there an a/b/c directory in the structure where you are starting your java program from?
--John -
Tar: *: Cannot stat: No such file or directory
everything except these lines is fine:
==> Removing info/doc files...
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .FILELIST file...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> Generating .PKGINFO file...
==> Compressing package...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> ERROR: Failed to create package file.This indicates that $startdir/pkg is empty i.e. there are no files to add to the package tarball, so therefore no tarball is created. This in turn indicates that something is wrong with your PKGBUILD. If you want to post it here, people can have a look at it, and probably spot the error.
-
Hi Folks:
I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
Could anyone help me out of that ??
Thanks in advance !This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
#import tlbid(2)
In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
#import "TsAdpApi.tlb" -
Newbie to VC++
Getting the below error in VC++ 2005, Indesign CS4
1>------ Build started: Project: WriteFishPrice, Configuration: Debug Win32 ------
1>Performing Custom Build Step
1>Compiling...
1>WFPNoStrip.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>WFPID.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>VCPlugInHeaders.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>TriggerResourceDeps.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>SDKPlugInEntrypoint.cpp
1>C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp(19) : fatal error C1083: Cannot open include file: 'boost/config.hpp': No such file or directory
1>Generating Code...
1>Build log was saved at "file://c:\id6sdk\build\win\objD\WriteFishPrice\BuildLog.htm"
1>WriteFishPrice - 5 error(s), 0 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
I have added the path of config.hpp in "addition include directories" still it is throwing the same error.
Regards,
SureshNeither the first not the second one:
am using the following path:
C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\external\asl\boost_libraries\boost
Now i have copied the complete 'external' folder to C:\id6sdk\ and added the directory now it is showing the following error:
Getting the following error:
fatal error C1083: Cannot open include file: 'IPMUnknown.h': No such file or directory C:\Program Files\Adobe\adobe_indesign_cs4_products_sdk_578win\source\precomp\common\ShukHeaders.cp 46
Don't understand the concept one error leading to the other error.
How to come out of these kind of problem.
Regards,
Suresh -
Cannot identify '/dev/video0': 2, No such file or directory
hi! i have a cheap webcam that used to work perfectly on arch, but some update broke it because /dev/video no longer exists (i don't know which upgrade, it has been some months since i used it last time)
when i try to run my webcam applications, it goes like that:
[nbcjr@universo ~]$ sonic-snap
Cannot identify '/dev/video0': 2, No such file or directory
[nbcjr@universo ~]$ sudo ls /dev/
adsp dvd hdb kmsg loop7 psaux ram2 snd ttyS2
audio fb hdb1 legacy mapper ptmx ram3 sound ttyS3
cd fb0 hdb2 log md pts ram4 stderr urandom
cdrom fd hdb3 loop md0 ram0 ram5 stdin vc
cdroms fd0 hdb4 loop0 mem ram1 ram6 stdout vcc
cdrw fd0h1200 hdb5 loop1 misc ram10 ram7 tts zero
console fd0u1440 hdc loop2 mixer ram11 ram8 tty
core fd0u360 ide loop3 null ram12 ram9 tty1
discs fd0u720 initctl loop4 nvidia0 ram13 random tty7
disk floppy input loop5 nvidiactl ram14 rd ttyS0
dsp full kmem loop6 port ram15 shm ttyS1
thanks!That would have been the last kernal upgrade, wiped out my USB mouse which caused XWindows to crash, They had to change back to the UDEV system. I believe the maintainer for the devFS system quit but anyways it was taken out of the kernal.
What I had to do was to change the configuration from /dev/mouse to /dev/input/mouse0, i beileve you can also do ln -s /dev/input/mouse0 /dev/mouse. Try looking in /dev/input/ for your camera. -
Files on XFS - cannot access, No such File or directory
I've got a HTPC with 3 partitions formatted to XFS. The pc has MythTV as the backend and XBMC as the frontend, and really doesn't get used for much else. Lately I have been seeing faults with the XFS partitions, which are spread over two different HDDs. Everything else is ext4.
$ sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 55.9G 0 disk
├─sda1 8:1 0 94.1M 0 part /boot/grub
├─sda2 8:2 0 1.9G 0 part
├─sda3 8:3 0 1K 0 part
├─sda5 8:5 0 18G 0 part /
├─sda6 8:6 0 18G 0 part /mnt/ssdRootClone
└─sda7 8:7 0 17.9G 0 part /mnt/archRootCinnamon
sdc 8:32 0 1.4T 0 disk
├─sdc1 8:33 0 1K 0 part
├─sdc5 8:37 0 537.1G 0 part /home/david/Movies <----XFS
├─sdc6 8:38 0 634.8G 0 part /home/david/TVseries <---XFS
└─sdc7 8:39 0 225.4G 0 part /home/david/Music
sdb 8:16 0 698.7G 0 disk
├─sdb1 8:17 0 1K 0 part
├─sdb5 8:21 0 50G 0 part /mnt/archRootCinnamon/home
├─sdb6 8:22 0 598.6G 0 part /MythTV <---XFS
├─sdb7 8:23 0 30.2G 0 part /home
└─sdb8 8:24 0 19.8G 0 part /home/david/Photos
sr0 11:0 1 1024M 0 rom
The kind of problem is (I've removed most of the output, but should be obvious what the problem is)
$ ls -la /MythTV/Recordings
ls: cannot access /MythTV/Recordings/Gandhi_02.02.2013.mkv: No such file or directory
total 333404488
drwxrwxr-x 2 mythtv users 28672 Jul 17 18:22 .
drwxrwxr-x 14 mythtv users 4096 Apr 7 13:50 ..
-rw-r--r-- 1 mythtv users 2087234697 Aug 9 2012 FrostNixon_08.07.2012.mkv
-rw-rw-rw- 1 mythtv users 64744 Jan 16 14:39 FrostNixon_08.07.2012.mkv.png
?????????? ? ? ? ? ? Gandhi_02.02.2013.mkv
-rw-rw-rw- 1 mythtv users 51156 Feb 3 18:22 Gandhi_02.02.2013.mkv.png
I have unmounted these partitions, and ran
sudo xfs_repair -v /dev/sdb6
which seems to do the job, but it reappears again. I'm not sure how to reproduce the error as its happening on both disks. First time I noticed it was while using Thunar bulk rename tool. It refused to rename some files from lower case to uppercase first letter, then I saw the "???????". It may also happen after I delete a recording through XBMC, but not certain.
So I installed smartmontools and did the short + conveyance test,
$ sudo smartctl -H /dev/sdb
[sudo] password for david:
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.0.85-1-lts-custom] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
and
$ sudo smartctl -l selftest /dev/sdb
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.0.85-1-lts-custom] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11770 -
# 2 Conveyance offline Completed without error 00% 11770 -
Looking for help here!If you suspect drive issues, run the long test. The short and conveyance tests are hit and miss. Also check for SMART errors (smartctl -l error <dev>). A drive can pass tests and be in a 'PASSED' state for 'SMART overall-health' even if errors occur regularly.
Also, I seem to recall something like this happening on an XFS lv months ago, but I'm not sure. More recently, the drive containing that lv would occasionally fail to be seen on the bus. I swapped the cable and moved it to another port and haven't had any problems since. Assuming I'm not hallucinating about the former, the two issues may have been related. -
Hi Experts,
I got the error "cannot find real path for '/var/install/Client/DATA_UNITS/HDB_CLIENT_LINUX_X86_64/../install/sdbrun': No such file or directory" and "Error during execution of HdbCmdClazz section!" during SAP NW 740 HANA installation. I specified the right path for HDB client (see in attachment).
Any ideas, please?
Thanks & best regards,
SreenuThe service file is in $srcdir, not $_svnmod/builders/cmake.
You're using an outdated PKGBUILD template too. The svn source should be included in the source array and not checked out manually during the build process.
EDIT: since this repository requires authentication, perhaps the correct format won't work.
Last edited by WorMzy (2015-02-08 23:07:59) -
when i enter appstore its keep telling me "cannot connect to itunes store(No such file or directory) what should i do????
Hi mhmd.h,
There was a very recent update to the entire Apple website.
If you are still unable to connect to the App Store from your iPhone, please post again.
- Judy -
I have a old source code that are using Measurement Studio I try to compile to do some modifications to the old source code but I have the next Compiler error "C:\Program Files\National Instruments\MeasurementStudio\VC\Include\NiColorVector.h(24) : fatal error C1083: Cannot open include file: 'NiVector.h': No such file or directory" I install the Measurement Studio 2015 try to fixed the error but I can't If I search the NiVector.h I can't find it something can help me please I need the NIVector.h file
Thank you.In Visual C++ you have to go to the Tools menu and select Options... then on the Directories tab you have to add for Include files both the jdk\include AND jdk\include\win to the list of directories and then there will be no problem finding the header files.
Maybe you are looking for
-
Upgraded from XP to Windows 7 & Now Nothing Synchronizes With iTunes
I have recently upgraded my computer with some new memory, changed from XP to Windows 7 and upgraded to bigger hard drives. I used to have all my Programs running on my C drive and all my data on the D Drive. I still do have it this way round its jus
-
How to set table background to no repeat (not as obvious answer)
Hi, just to be clear I'm not refering to a normal background on a page where I could just edit the css and type background-repeat: no-repeat (hence the 'not as obvious answer' in the title). I have a table with a background image set to it - i did th
-
Points for good cause. https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82 a®
-
CDs Suddenly Not Importing...?
I was putting CDs into my CD player and they were opening in iTunes for Importing. Suddenly, I am unable to do this. I just put in a BRAND NEW CD into my CD player and it won't open in iTunes. What is happening? What else can I do? Is there a setting
-
I just finished using my 2gig iPod nano as a harddrive to transfer songs from my home computer to my laptop. Now that I've finished transferring my songs, I've deleted the folder I made on my iPod with the expectation that I will clear up the memory