Poor performance with Acrobat Pro 9

Hello,
Acrobat Pro 9 has begun to run very slowly. When checking review comments, simply filling in a check box for an edit can take a solid ten-count. If I take the same file and open it on another computer, it runs fine. I use the shared review function for some documents, and the enable commenting function for others. If I open Acrobat by holding the shift key so that no plug ins are run, the program functions fairly well, but then I can't use any of the features provided through the plugins.
This is getting to be a very serious problem. I'd appreciate some help with it. Thanks.

http://barefeats.com/tube19.html
The 2013 Mac Pro Quad-Core with dual FirePro D300 GPUs beat the 2013 iMac Quad-Core i7 with the single GeForce GTX 780M GPU in 8 out of 12 of the tests featured above. However, it only 'blew away' the iMac in three GPU intensive tests -- two of which utilize the dual GPUs.
http://barefeats.com/tube17.html
LuxMark is one of the few OpenCL benchmarks that uses multiple GPUs. So we used it in our last graph to highlight the advantage of the 'late 2013' Mac Pro's slowest pair of GPUs (FirePro D300s). It obliterates the iMac's single GPU, but a 2010 Mac Pro tower with a really strong AMD GPU like the 7970 (running only on internal factory PCIe power feeds) comes close. I predict that the dual D700s in the top 2013 Mac Pro models will reach or exceed 4000KSamples/sec.
a comparison of all models from 4-Core to 12-Core using Pro Apps. And a 4-Core iMac is thrown in for good measure.
http://barefeats.com/tube03.html
I cannot point to a good test and review of issues with Adobe apps and nMP due to poor AMD drivers but I think you can find those.
Here is a jump into some, and I think you would find more over here:
http://forums.macrumors.com/showthread.php?t=1747219&highlight=adobe+d700
Not sure if this issue went away or not, if 10,9.5 helped (it should have) or perhaps try a clean install (maybe external device if not backup + erase & install) There are enough issues with importing from another system using Migration Assistant to avoid that, but none with Setup Assistant (go figure why it has bugs... still).

Similar Messages

  • Outlook Quick Print no longer works with Acrobat Pro v11

    Hi All,
    Prior to installing Acrobat Pro v11 on a Remote Desktop Server (Windows Server 2008 R2 Standard) we were able to use the Quick Print function for attachments within Outlook (Microsoft Office 2010 32-bit), although the default printer was physical printer the application would always open with Acrobat Pro even after disabling it as a default application. Upon uninstalling Acrobat Pro v11 the issue no longer occurs and the quick print fuction has been restored to normal.
    If there is a known technical solution it would be greatly appreciated.
    Best regards,

    rgrosz789, thank you for your suggestion.
    Your code worked but caused run time error at the following line as below.
    Sub Test()
        'Dim app As CAcroApp
        Dim app As Object
        Set app = CreateObject("AcroExch.App")
        app.Show 'Raises run time error
    End Sub
    I finally uninstalled Acrobat Pro 9, reinstalled it, then, my original program worked fine.
    Something must have gone wrong in Acrobat 9 :-)

  • Problem printing PDF with Acrobat Pro 9.4.4

    Hi!
    I can't correctly print a PDF with Acrobat Pro that was created in Indesign CS5.
    I want to print it on a letter format (8,5 X 11") and it offers me a format of 8,49 X 10,99". It results in having my document being printed as tile with it's original format 12 X 21,5" as if I didn't adjust the format to be reduced.
    I temporary used Preview to print my PDF, but now I can't as the encoding in which I received the PDF used to be "Creo Normalizer JTP" and now it is "Adobe PDF Library 9.9"
    If anyone can help!
    This is my first time here, thanks in advance for your help

    Here's what it looks like (I work in french, hope you can understand)
    I just updated my software, thanks for that!
    Now, my problem is still on... I still have the very same result when I print. I did selected the correct Page Scalling I needed. I did selected the paper size I wanted. I chose Shrink to Printable Area and I tried with Fit to Printable Area.
    Since I've had this problem the size appears as : 8,49 X 10,99 (Instead of 8,5 X 11). I tried with Legal (8,5 X 14) but it appears as 8,49 X 13,99. I went through the preferences, but I can't find anything that could be the problem.
    Any other idea?
    Thanks!!
    Also, Preview was very helpful, as it did print my PDF correctly! I understand it's not the best... but it did the job

  • I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI.  It will only allow "preview".  I have to  copy and paste the .pdf to my desktop and then open it.  What do I do to restore the 2x click in Outlook to open the .pdf?  thank you

    I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI.  It will only allow "preview".  I have to  copy and paste the .pdf to my desktop and then open it.  What do I do to restore the 2x click in Outlook to open the .pdf?  As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email:  Thank you
    Adobe Acrobat has stopped working
    Windows can check online for a solution to the problem.
    -Check online for a solution and close the program
    -Close the program
    Problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                             Acrobat.exe
      Application Version:                           11.0.7.79
      Application Timestamp:                     536b812b
      Fault Module Name:                          Acrobat.dll
      Fault Module Version:                        11.0.7.79
      Fault Module Timestamp:                  536b80ff
      Exception Code:                                  c0000005
      Exception Offset:                                00cbf281
      OS Version:                                          6.1.7601.2.1.0.256.48
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Hi Gary,
    I have seen this issue occur with users who have this registry setting missing or have improper permissions.
    When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
    If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
    Please  heck if the following reg key exists:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
    or
    HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
    Value Name: OutlookSecureTempFolder
    If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
    If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
    Please check the following key:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
    Note the location for: OutlookSecureTempFolder key
    Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
    Regards,
    Rave

  • I can't use thunderbird 31.2.0 to send attachement from a pdf file with Acrobat PRO XI

    I can't use thunderbird 31.2.0 (Mozilla) to send attachement from a pdf file with Acrobat PRO XI. Each time, Acrobat replies (in french) : "il n'y a pas de client pour la messagerie par défaut". Thunderbird is indicated as "by default" in the list of programs of Windows.
    Even if I type my e-mail address, etc. in the account of Acrobat, it doesn't change. Each time, I have to record a PDF file in a folder and return to Thunderbird to send it as attached. It is a too long process,  compared with Windows XP with Acrobat Reader or Acrobat 5, I had before.
    Would you please help me to explain the process. My OS is Windows 8.1.
    Thank you

    Thank you for your answer.
    What i want to do : to send PDF files as attached documents in a message
    generated by thunderbird by my e-mail address [email protected] or
    another one I have.
    When I introduce my e-mail address under Edit-Preferences-Email
    Accounts, Acrobat ask the e-mail account, the password, the IMAP for
    ingoing message (and I use POP) and SMTP for outgoing messages. Even I
    introduce all the datas, it doesn't change, Acrobat is unable to send
    the message. And the process is not convenient, because I need all my
    outgoing messages be documented inside Thunderbird.
    So, I repeat my request : how can I use thenderbird as program by
    default from Acrobat or any other software ?
    Thank you for your next message.
    Jean-Luc Rongé
    Le 21-10-14 14:24, ANAND8502 a écrit :
    >
          I can't use thunderbird 31.2.0 to send attachement from a pdf
          file with Acrobat PRO XI
    created by ANAND8502 <https://forums.adobe.com/people/ANAND8502> in
    /Acrobat Installation & Update Issues/ - View the full discussion
    <https://forums.adobe.com/message/6850947#6850947>

  • Is Reader XI Compatable With Acrobat Pro 9.5.5?

    I want to upgrade my Reader to Adobe Reader XI and wonder if XI will intregrate and work with my  current Adobe Acrobat Pro 9.5.5 full program?

    Hello Chuck,
    Yes, you can install Reader XI with Acrobat Pro 9.5.5; it should not create any incompatibility issue.
    Regards,
    Anoop

  • Enterprise mitigation for APSA08-01 with Acrobat Pro 7.0.9

    Hello,
    My organization has 30,000+ users with Acrobat Pro 7.0.9, and we are currently in the process of purchasing the upgrade to 8. The problem is that this vulnerability presents an unacceptable risk until that purchase has been made.
    Is there an ETA on the release of the patch for 7.0.9?
    Is there any way of mitigating these vulnerabilities through the registry? Telling 30,000 people to disable Javascript and Open in Browser is not an option.
    Thanks in advance,
    Mike

    Thanks Bill.  Yes, I did let AA7 update after installing.  They first noticed the problem yesterday, but it was the first time they had tried to combine any files since the Reader 9.3 update.  I can only assume the problem is related.  I'll try another update and see if it does anything.
    I appreciate the reply.

  • Dynamic stamps with Acrobat Pro X

    Help needed!
    How to create own dynamic stamps with Acrobat Pro X, without any knowledge of programming.
    It was very easy with the program used before (Nuance); unfortunally it's not possible to export from Nuance to Acrobat.
    Thanks in advance
    vtosi

    It can't be done without using a script, and not a very simple one, either.
    There are detailed tutorials about how to do it, for example here:
    http://acrobatusers.com/tutorials
    If you're interested in someone to create the stamp (and all the required
    scripts) for you, feel free to contact me by PM or at [email protected] .

  • When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't h

    When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't have my product key, so could not reinstall Acrobat Pro for me. Since then, I have gotten the product key sent to me from my former employer, [ REMOVED ] So I need help in re-downloading, installing and activating the Acrobat Pro software on this computer.

    Please remove the S/N immediately (I can't or would). Never post them online. As for download you can go to http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html on the right panel to get 9 pro. I am not sure there is a MAC version there, but that is the first place to go. If it is the proper version, then please back it up to CD and/or portable HD, not the system HD.

  • Problem with Acrobat Pro - install, etc.

    I have problem with my Acrobat Pro (in Adobe Design Standard CS6 edition) - Regularly once a month throughout the software crashes and will not turn on. Only helps to re-install. Now I additionally happened that when reinstalling does not load serial number. It made me very disgruntled. Can you please help? Acrobat Pro I still need to work and this is me terribly resides. My customer identification number is : 168735979. Thank you.

    Thank you but unfortunately the process does not work. It makes the same thing as before. When I install and enters the serial number, it writes: We are unable to verify the product serial number Creative Suite 6 Design Standard. Please contact Customer Support.
    When I deactivated Photoshop and re-activated by the process, everything went without a problem. The problem is only with Acrobat Pro. Acrofix - after running only flashes a command prompt window, otherwise nothing happens. I do not know what to do ....

  • How can I convert a PDF/A file into a PDF file with Acrobat Pro X?

    How can I convert a PDF/A file into a PDF file with Acrobat Pro X? I'd like to modifiy the file which I have only as a PDF/A.

    There's two answers if you want to modify the file:
    You can temporarily turn off PDF/A Mode in your preferences, so they don't open as read-only. The problem would be if you do something to the file that violated the PDF/A standard, so you should always run a Preflight check afterwards to make sure.
    If you want to remove the PDF/A header tag, use Preflight again - it's on the Print Production Panel in Acrobat X Pro (which may be hidden, use the options menu on the Tools Pane to show it). There's a profile called "Remove PDF/A information" - choose this and press Analyze and Fix. Nothing else about the file will be altered but when you save and reopen it all the editing tools will become active.

  • Unable to save a copy of encrypted pdf with Acrobat Pro 10.0

    I create an encrypted pdf using prince a tool to convert HTML documents to pdf. I am unable to save a copy of the pdf file when i use Acrobat Pro 10.0.
    It displays the following error
    "The document could not be saved. There was a problem reading this document(21)."
    However Acrobat Reader (basic) allows me to do so.
    I am also able to save a copy of the document with Acrobat pro 7. I raised this issue with Prince and they told me that it could probably be a bug/unwanted behaviour with Acrobat Pro 10.0
    My system environment details:
    OS: Windows xp
    Acrobat Pro: 10.0.0
    Acrobat Reader: 10.1.0

    Use the forum for Adobe Acrobat.

  • Please advice on adding 3D-animation files into a PDF with Acrobat Pro DC.

    Hello,
    Where is the button animation in Acrobat Pro DC?
    Can you give me advice on adding 3D-animation files into a PDF with Acrobat Pro DC.
    I have Acrobat PRO DC .
    Thank you.

    Hi George,
    I just tried adding the files as attachments; however I didn't like doing that because it increased the file size of my PDF document quite a bit. 
    I'm not sure if you're familiar with the "Insert Object" command in MS Word, but I want to do the same thing in my PDF document...but the key is, anyone must to be able to open the embedded file from any location.
    I created an MS Word document with several embedded objects.  I was later asked to PDF the Word document, but since embedded MS Word objects do not migrate to the PDF, I am now trying to embed the same files I embedded into my Word document into my PDF document over top of the icon image.  The file types I'm trying to embed include MS Word, Excel, PowerPoint, and Adobe PDF.  Does this make more sense?  I want to create a hyperlink over top the icon image that was PDF'd from the MS Word document which allows any user to click on the link and open the separate file.

  • REDUCE FILE SIZE with Acrobat Pro

    Hi everyone!
    I  created a epk for a rock band  with Illustrator then I created one pdf that contains the all three pages with Acrobat Pro (I downloaded the trial because it was just for this occasion) This epk is a pdf file with 3 pages, some pictures and hyperlinks.
    I need to send the epk to the band and they want a reduced size one. The original is 8.3 M but obviously it's too big to be sent via email.
    I have been trying with the option SAVE AS -  REDUCED SIZE PDF but it doesn't work! Still the same size.
    I am new to acrobat so maybe I am missing something.
    HELP!
    Thanks

    Hi michelab,
    You can also try choosing Save As > Optimized PDF. There are various settings in that dialog box that you can manipulate to bring down the file size. Here's the Help topic on that dialog box, with information about the various settings:http://helpx.adobe.com/acrobat/using/optimizing-pdfs-acrobat-pro.html
    Please let us know how it goes.
    Best,
    Sara

  • Which license is CSDS33MUPA / 051... It's Creative Suite Design Standard 3.3 with Acrobat Pro 9 in Czech... but which license is MUPA ?

    Which license is CSDS33MUPA / 051... It's Creative Suite Design Standard 3.3 with Acrobat Pro 9 in Czech... but which license is MUPA ?

    Why don't you call support again and ask if you can have a copy of the discs with your serial number? I don't know if there is a small fee but I prefer to have discs than a download. Then you can try reinstalling.

Maybe you are looking for