Pop out menu problems

I put a pop out menu on the second navigation button on this
site. I used the dreamweaver 8's behaviors panel to create it.
In two of the pages the index and the music page the pop-out
menu does not appear when published to the internet.
It does appear when I preview in browser window. I cannot for
the life of me figure this out. I have tried changing
the non- choice in the target window to _parent or _blank and
it still doesn't show up on the internet. I appreciate any and all
help.
Any one out there with some advice?
Thanks,
PB

> Any one out there with some advice?
Yes, but you aren't going to like it. I wouldn't recommend
that anyone use
those menus in DW8. There are much better ways -
http://apptools.com/rants/jsmenu.php
http://apptools.com/rants/menus.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"patriciabrowne" <[email protected]> wrote
in message
news:e81fk6$jgh$[email protected]..
>I put a pop out menu on the second navigation button on
this site. I used
>the
> dreamweaver 8's behaviors panel to create it.
> In two of the pages the index and the music page the
pop-out menu does not
> appear when published to the internet.
> It does appear when I preview in browser window. I
cannot for the life of
> me
> figure this out. I have tried changing
> the non- choice in the target window to _parent or
_blank and it still
> doesn't
> show up on the internet. I appreciate any and all help.
> Any one out there with some advice?
> Thanks,
> PB
>

Similar Messages

How to disable Web Camera pop out menu on my Satellite?

I have a Satellite laptop which has an annoying pop out menu on the left side of the screen. The one with four icons marked, Photo/Video, Settings, Effect, and Face Recognition.
Is there any way to disable it. Any help would be greatly appreciated.

Hi
In most cases the camera software starts automatically while booting up the windows OS. To prevent this you can disable the webcam software in Startup of msconfig.
Type msconfig in search and choose Startup tab.
Here you have to remove the check from webcam software entry.
Save this, reboot and now webcam software should not start automatically.
But xavers advice should work too.

I can not get the pop out menu from the tools to work. It looks like they are not loaded

Can someone help me know how to get the tool pop out menu to work. It looks like they are not loaded.

You do have to click and hold down on any tool icon with a small triangle in the lower right.
The second method is to right-click on the tool.
Gene

Fireworks 8 pop up menu problem

My problem involves creating a pop-up menu in Fireworks 8 and
then when Iimport into Dreamweave 8, and then preview using
Firefox, or EI, the box gets cut off and the words hang off the
edge. I have the width and height specifications in Fireworks set
to automatic. When I preview in Firefox or EI from fireworks, it
looks great, so it almost seems it is something in the transition
from Fireworks to Dreamweaver. Anyone deal with this?

My problem involves creating a pop-up menu in Fireworks 8 and
then when Iimport into Dreamweave 8, and then preview using
Firefox, or EI, the box gets cut off and the words hang off the
edge. I have the width and height specifications in Fireworks set
to automatic. When I preview in Firefox or EI from fireworks, it
looks great, so it almost seems it is something in the transition
from Fireworks to Dreamweaver. Anyone deal with this?

Help! Pop-up menu problem

I made a pop-up menu in a trial version of Fireworks 8.
Everything works great within Fireworks, but when I try to insert
it in Dreamweaver 4 (using the Insert Fireworks html button) it
tells me that I need to insert an Fireworks html that was exported
from Fireworks. The pop-up menu I made was exported as an html from
Fireworks. Help!

I don't think you are going to have much success trying to
marry DW4 with
anything contemporary. It's methods and structure are so
antique, you know?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Erin88" <[email protected]> wrote in
message
news:er308c$391$[email protected]..
>I made a pop-up menu in a trial version of Fireworks 8.
Everything works
>great
> within Fireworks, but when I try to insert it in
Dreamweaver 4 (using the
> Insert Fireworks html button) it tells me that I need to
insert an
> Fireworks
> html that was exported from Fireworks. The pop-up menu I
made was exported
> as
> an html from Fireworks. Help!
>

Unordered list with pop out menu

I have an unordered list in a sidebar. After a user clicks on the link in the sidebar, I want a larger pop up window to appear with several links inside of that box that they can click on. What is the best way to do that?

http://css3menu.com/modern-css3-menu-bar.html
These are all CSS Menu's which can be modified to suit your requirements. If you are looking for a straight-forward drag, drop and play, your expectations may be a little too high. These take a simple list structure and style it. The modifications you would need to make would be in the CSS stylesheet.

DW Pop-up menu problems

Ive used Dreamweaver to generate the pop-up menus on the
following page;
http://new.andersonsolicitors.com/index_dd_test.php
The problem is in IE, next to the top two items under
'services' there is the symbol that you see if you have a link to
an image that is broken. Does anyone know how to sort this? These
items are part of a tree, with further menus coming off them
Also, some of the text is too long to fit in the width of the
menus, does anyome know hoe to make the text wrap in this case?
Many Thanks

Please read this very carefully. You need to re-think this
approach....
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Izzyg33" <[email protected]> wrote in
message
news:go4akd$rbb$[email protected]..
> Ive used Dreamweaver to generate the pop-up menus on the
following page;
>
>
http://new.andersonsolicitors.com/index_dd_test.php
>
> The problem is in IE, next to the top two items under
'services' there is
> the
> symbol that you see if you have a link to an image that
is broken. Does
> anyone
> know how to sort this? These items are part of a tree,
with further menus
> coming off them
>
> Also, some of the text is too long to fit in the width
of the menus, does
> anyome know hoe to make the text wrap in this case?
>
> Many Thanks
>

Pop-up menu problem

I rollovered the one bar and saw the 4 bars. How do I put the
master bar over the 4 bars. I would rollover and see the 4 bars
ubder the master bar.
here

bobau wrote:
> I rollovered the one bar and saw the 4 bars. How do I
put the master bar over the 4 bars. I would rollover and see the 4
bars ubder the master bar.
>
>
>
http://baugello.50webs.com/Augello_Bob_hw4.swf
You can't use just buttons for it. You need to use button
within movie clip.
Frame 1 Master Bar, on roll over go to frame 2 where you have
rest of the
buttons.
You can also have on the frame whatever you wish, Master Bar,
extra notes etc...
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

New Member with popout menu problem

I'm new to Dreamweaver and am trying to create a page of 3
frames that contains a dropdown/pop-out menu in the 2nd frame. When
the popout exceeds 3 choices, it it no longer displayed, giving the
user the sense that it "disappears" behind the main frame (3rd
frame). What do I need to do to get the popout menu to lay "on top"
of the 3rd frame? I'm trying to do the same exact thing that this
site is doing at the top of this exact page where you see "Home,
SOlutions, Products, etc", and the popout lays on top of the
page.

JDubb23 wrote:
> I'm new to Dreamweaver and am trying to create a page of
3 frames that contains
> a dropdown/pop-out menu in the 2nd frame. When the
popout exceeds 3 choices,
> it it no longer displayed, giving the user the sense
that it "disappears"
> behind the main frame (3rd frame). What do I need to do
to get the popout menu
> to lay "on top" of the 3rd frame? I'm trying to do the
same exact thing that
> this site is doing at the top of this exact page where
you see "Home,
> SOlutions, Products, etc", and the popout lays on top of
the page.
Probably the most viable solution would be to start over and
not use frames, then the problem pretty much goes away.
It is possible to cause some content within a frame to show
based upon events in other frames (think mousing over a main menu
item in one frame and having a sub menu appear within another
frame, but that sub menu content would have to be part of the
content of the other frame). However, the way to do this is tricky
and has several cross browser issues, especially when content in
either frame can be scrolled. It really is much easier to not use
frames in the first place. IMO, with templates and includes to
handle adding menus, headers and footer and other common elements
to all pages there really is no compelling case to be using frames.
And even if there were, then it would be easier to change the way
the menu works (think tree or accordion menus on one side of the
page instead of across top of the page).
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert

Spry menu problem - extra border

I have used a spry menu bar vertical on my site. When the
menu opens to the right upon rollover all links are there, however,
there appears to be an extra border or box behind the pop out menu.
I can email a screen shot of what it is doing. I appreciate any
help!!!

Well, you are changing the right style selector.
I suggest you use the vertical image element as a background image in the menu items themselves, then they will be harmoniously positioned with the menu.
You can give each menu item its own width (in the stylesheet), if you need to, but for heaven's sake, get rid of those huge padding measurements. Pad enough on the right to disclose the vertical image, but try centering the text in each button instead of using padding to move it around.
Beth

FF5: when I go to Bookmark menu, and select a folder of my bookmarks, the resultant pop-up menu stays in place, not allowing me to access another bookmark folder instead. Just started happening today after I updated to FF5.

My bookmark folder has a number of sub-folders in it. When I try to access a bookmark, and mistakenly hover over the wrong sub-folder, the resultant pop-out menu will not go away, so I can't access the proper sub-folder. I have to click outside the pop-out and start all over again.

Ok. Update. Ive been playing around with this a bit. So the first thing I tried was adding a bookmark directly to the toolbar and not to a folder. This worked. I can see the bookmark on the tool bar and in the toolbar folder under organize bookmarks. Now. I try to add a bookmark for the same page to a folder on the toolbar. This time it shows up under bookmarks toolbar/*subfolder in organize bookmarks. But it does not show up in that folder under the actual tool bar. Like I said in my last post. I do not have two "bookmark toolbar" folders. just one that I am aware of.

"Show Pop-Up Menu" behavior problems

Greetings—
The "Show Pop-Up Menu" under Add Behaviors is grayed-out and
won't allow additional links to be added to the templates. I'm
currently on DW MX 2004.
Thank you

> Does anyone have any suggestions what to do so this
selection is not
> grayed
> out?
The functionality has been REMOVED as a primary function in
CS3. It will
allow you to edit a LEGACY MENU, but not create a new menu
from scratch.
This is a good thing. The DW menus were indescribably
horrible.
In their place, use the Spry menus, or -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Moni057" <[email protected]> wrote in
message
news:f3na5s$9lv$[email protected]..
>I just got CS3 (and un-installed DW8) and I have learned
that the "Show
>Pop-Up
> Menu" behavior is depreciated. The problem I'm having is
it is Grayed out
> (And
> yes, I made sure I had a 'link' selected when I tried to
choose this
> behavior)
Is there a setting in the Preferences that I missed or is CS3
just teasing
> me w/a remembrance of this easy to use pop up menu
maker? Any help is
> appreciated :)
>
> Thanks,
> Monica
>
> [email protected]
>
> ps: I do know about the "Spry assets" but I want to see
if the above
> option is
> possible first. thanx :)
>

The spry pop-up menu I built in Adobe Dreamweaver worked fine in my old Firefox, I updated Firefox today and the menu no longer works--despite disabling the pop-up blocker in Firefox preferences...what's the problem??? I need the menu to work!!!

I built a new pop-up menu for my website using Spry in Adobe Dreamweaver. Because of some differences in .HTML and .XHTML
it took me days to get it right. I tested every variation in Firefox until it worked perfectly. Today, I installed the newest version of Firefox and now the pop-up no longer works. I changed the preferences in Firefox to disable to pop-up blocker and it STILL DOESN'T WORK...although an older style of pop-up menu (menu machine) which is no longer supported by Adobe, DOES WORK.
HELP!!! THIS IS IMPORTANT.

pixlor:
OP is using CS3 and the menu blog is talking about the menus
in earlier
versions of FW, so *most* of the points made in the blog
don't apply.
That's not to say that using CS3 pop-up menus is a *good*
thing....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixlor" <[email protected]> wrote in
message
news:gbce7b$a50$[email protected]..
>
quote:
Originally posted by:
captainbianco
> I agree completely and totally, and I will haha but I'd
like to get this
> one
> fixed if I can. You can view the page here
>
http://www.flooringanswers.com/nysurfaces/index2.htm
> Hover over the letters to see the pop-up menu's. The one
over "t" is the
> problem.
> Under Flooring, for example, you have a div with id of
> MMMenu0910163730_1_1
> (ugh). Under that are four items and they have their own
IDs:
> MMMenu0910163730_1_1_Item_0
> MMMenu0910163730_1_1_Item_1
> MMMenu0910163730_1_1_Item_2
> MMMenu0910163730_1_1_Item_3
> MMMenu0910163730_1_1_Item_4
>
> Your CSS file, however, doesn't have location
information for the ..Item_4
> object.
>
> That's just from a quick, cursory look. In order to fix
this, you're going
> to
> have to go through it line by line and debug it. By the
time you do this,
> you
> might be better off getting something else and starting
from scratch.
>
> Read this:
>
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
>

'Quick Fix' for HP Officejet Pro L7580 Printer & 88XL Yellow Cartridge Popping out problem!

After reading other forum comments from people having the same problem with the yellow cartridge popping-out, combined with others who have realised that HP have no interest in compensating anyone for this rediculous example of, at best, 'bad design', or at worst 'blatent planned obsolescence', I have created a solution that may add another 1, 2 or more years of life to the HP Officejet Pro L7580 Printer.
This is not the elegant technical solution I was hoping for. However, in hindsight, it may prove to be a more reliable solution than replacing the faulty part that is actually causing the problem. So, here it is the solution ........
I found a wooden triangular door stop that I cut to size that fitted exactly in the space between the plastic door and the offending yellow cartridge. To hold it in place, I wrapped the doorstop with 2" cellotape, then I stuck the door stop to the inside of the plastic door with double sided cellotape (double sided stick-on foam would also work well). With the doorstop in the correct place, the plastic door closed perfectly and was snug enough to apply sufficent pressure to the offending yellow cartridge, and hence stopping it from popping out again. To make sure the plastic door does not 'fly open' with the pressure of the yellow cartridge (when it wants to pop out!), I applied another piece of 2" cellotape around the outside of the door, holding it to the body of the photocopier.
This exercise only took 10-15 mins to do. I feel this is a much better option than spending another $300+ on a new All-in-One system, as well as being a good environmental solution. If this is DELIBERATE 'planned obsolescence', companies like HP need to be more accountable for, at best, 'sloppy design'. Any feedback would be appreciated.

Try this for a Quick Fix ...........
After reading other forum comments from people having the same problem with the yellow cartridge popping-out, combined with others who have realised that HP have no interest in compensating anyone for this rediculous example of, at best, 'bad design', or at worst 'blatent planned obsolescence', I have created a 'quick fix' that may add another 1, 2 or more years of life to the HP Officejet Pro L7580 Printer.
This is not the elegant technical solution I was hoping for. However, in hindsight, it may prove to be a more reliable solution than replacing the faulty part that is actually causing the problem. So, here it is the Quick Fix ........
I found a wooden triangular door stop that I cut to size that fitted exactly in the space between the plastic door and the offending yellow cartridge. To hold it in place, I wrapped the doorstop with 2" cellotape, then I stuck the door stop to the inside of the plastic door with double sided cellotape (double sided stick-on foam would also work well). With the doorstop in the correct place, the plastic door closed perfectly and was snug enough to apply sufficent pressure to the offending yellow cartridge, and hence stopping it from popping out again. To make sure the plastic door does not 'fly open' with the pressure of the yellow cartridge (when it wants to pop out!), I applied another piece of 2" cellotape around the outside of the door, holding it to the body of the photocopier.
This exercise only took 10-15 mins to do. I feel this is a much better option than spending another $300+ on a new All-in-One system, as well as being a good environmental solution. If this is DELIBERATE 'planned obsolescence', companies like HP need to be more accountable for, at best, 'sloppy design'. Any feedback would be appreciated.

Problem with pop out window in my smarter mail

For work I have to use SmarterMail. When I go to create a new email or reply to someone, a new smaller window pops out for me to create my message. The problem is.... well the text is not right. Kind of hard to describe so I have cut and paste an example below. Sometimes it can be very difficult to decipher a message. Please help me fix this. It has not been a problem until the most recent firefox update. Also it has been affected on all my PC's and laptop.
The example below is what I see when I hit reply to a message. The information I need is there but there is a bunch of other stuff there too. I think its HTML code or something... PLEASE HELP ME FIX IT
<br><br>Doug Graham <br>
Underwater Sports Bellevue <br>
12003 NE 12th <br>
Bellevue, WA. 98004 <br>
(425) 454-5168 <br>
www.underwatersports.com
<br><br><font size=2 face='Tahoma, Arial, Sans-Serif'><hr size=2 width="100%" align=center><b>From</b>: "Seon Kang" <[email protected]><br><b>Sent</b>: Wednesday, September 07, 2011 5:04 PM<br><b>To</b>: [email protected]<br><b>Subject</b>: Academics Thurs night</font><br><br><DIV dir=ltr>
<DIV style="FONT-FAMILY: 'Calibri'; COLOR: #000000; FONT-SIZE: 12pt">
<DIV>Hi Doug,</DIV>
<DIV> </DIV>
<DIV>Wanted to let you know that the OW students took their final on Tuesday so
we won’t be doing an academic session on Thurs.  We let them all know to
get their tanks filled and also to get fitted for their cold water suits. 
</DIV>
<DIV> </DIV>
<DIV>A couple students do need to retake their test so I’m going to be meeting
them at the shop on Friday at 6 for them to take their final again.</DIV>
<DIV> </DIV>
<DIV>Thanks!<BR>Seon</DIV></DIV></DIV><br>

Hey,
i Added a print screen of my eclipse when the pop up is appearing...
I really need your help...
+----------------------------------------------------------------------+
|Filename: javaerror.JPG |
|Download: http://forums.novell.com/attachment....achmentid=4572 |
+----------------------------------------------------------------------+
tamirb_a
tamirb_a's Profile: http://forums.novell.com/member.php?userid=89193
View this thread: http://forums.novell.com/showthread.php?t=414890

Pop out menu problems

Similar Messages

Maybe you are looking for