Pop up in manual orders but not in EDI

Hi Friends,
Please help me.
I have anice issue. When the user try to create a sales order he is getting a pop up or a warrning message saying that the line item has to be a delivery quanity of 20 40 60,when 1 box + 20 pices ,viz. This pop up is only displaying when creating manual orders but when an order comes and saves through EDI and when the user opens it thorugh va02 this pop up is not displaying , therefore if the order is 35 for a material it is just saving with 35 instead of 20 or 40.
This is making the user to waste his time at the time of delivery , in ware house. So the user is asking the same functionality appeared in EDI which is currently in Manual orders.
The system gives the pop up after checking Material Master, Sales org, Delivery unit feild.
Hope evey one understands this or come back to me. Please help me wether any standard functionalty is there or we have to add a besopk for this.

Similar Messages

Plays in order, but not random (won't shuffle). Shuts off in shuffle mode

My 1G (1st generation) ipod plays the songs in order, but not in (random) shuffle mode. In order mode, switching to shuffle turns the ipod off. If in shuffle mode initially, the ipod will not play at all. In shuffle mode, there's a green light on the front, initially, then it shuts off.
I believe it's a problem with the shuffle switch and/or shuffle mode exclusively.
I have reformatted, reset and done the "five R's" twice and the battery is fully charged. I've read about removing the switch in the back to clean it, but I don't want to risk breaking it. Any experience with this problem? Any experience with removing the switch?
Emachines Windows XP
Emachines Windows XP

My 1G (1st generation) ipod plays the songs in order,
but not in (random) shuffle mode. In order mode,
switching to shuffle turns the ipod off. If in
shuffle mode initially, the ipod will not play at
all. In shuffle mode, there's a green light on the
front, initially, then it shuts off.
I believe it's a problem with the shuffle switch
and/or shuffle mode exclusively.
I have reformatted, reset and done the "five R's"
twice and the battery is fully charged. I've read
about removing the switch in the back to clean it,
but I don't want to risk breaking it. Any experience
with this problem? Any experience with removing the
switch?
My first Shuffle (1st Gen) slide switch began behaving erratically... it would slide past the first position and was difficult to reposition in the play-in-order position.
At the time it was 1 month old and was replaced at an Apple Store. It's been working fine for over a year.
The slider can get crud under it and can be removed carefully when in the OFF position by sliding a butter knife blade under it from the bottom. it will pop up IF the operation is done carefully. DO NOT attempt this IF your Shuffle is under warranty...
http://www.ifixit.com/Guide/iPod/iPod-Shuffle/Hold-Switch/98/1/Page-1/Hold-Switc h

Report for Material Issued against Service Orders But not Billed.

Hi Experts,
For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
Thanks in Advance,
Abhinesh

Hi Vivek,
What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
(Sorrowully I don't know which logical database would be good for you)
BR
Csaba

In downloading my Events from iPhoto on my Mac to my iPad Air, the Events arrive in the proper order but not showing the Key Photo. At the same time, the Events arrive in iPhoto on the iPad in totally random order but showing the Key Photo.Why?

In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?

HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
i tried to sort it out by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

Can I stop the output of PO message on change of order but not on creating

Can I set customising so that the PO automatically creates a message on creation of the order, but not when it is changed. That way the purchaser can choose to recreate the message if necessary. Sometimes changes are made to the order for internal purposes, but the order does not need to be resent to the Vendor. Currently this happens automatically via an email.
Alternatively, is it possible to print the whole PO when changes are made rather than just the bits that have been changed? To avoid confusing the Vendor with half the order being resent.
Thank you
Karen

This is not possible on standard SAP. There is a workaround you can consider so user can reprint the entire PO. When users have made the changes and ready to print the PO, they can go to PO message screen and do the followings:
1. Delete the entry corresponds to change message (this is the row with yellow light and has check mark in the C column)
2. Select the row corresponds to the first printing of PO (this is the row with now check mark in the C column) and press on repeat output.
Once they've done these steps, the entire PO will be included in the output.
If you need to make this happened automatically, you will need to do custom development.
Hope this helps.

Purchase Item for a sales order but not on sales order lines

Hi,
Is it possible to purchase an item for a sales order but item is not actually on sales order? I know we can create PO through SO logistic tab and also through procurement confirmation wizard but these functionalities can be used to buy the item which is on the SO. The problem is that the item is not on SO. It's kind of hidden cost going against the SO.
Will be grateful for your help.
Thanks,
Kanu

Thanks Gordon. Ok I can add items to the PO. But will those items be costed against the SO? Because there is no SO number (POR1.BaseRef field) on that extra PO line.
I appreciate your help here.
Best Regards,
Kanu

Using ipad1, why do my pictures in a new folder i just ceated are not in a good order? all my other older folders are in the right order but not the last one i synchronised

I never had this problem before. My photos are mixed in my new folder of my IPad1 with ios version 5.1.1
. Usually, they are in alphabetical order like in any usual folder, but not this time .I synchronised with ITunes with the usb connector. How can I put back in the right order my pictures? I was just told (by apple's help desk) that IPad IOS 5.1.1 sorts photos by the last date modified instead of by alphanumerical order. What a foolish idea? Is there something we can do about this? Thanks! Robert

all the pictures appear but can only be shown clicking in the Catalog Panel in LR, they are all included within the ¨all pictures¨ and in ¨ Previus import ¨ ... the previus import are all the photos i cannot see within folders ..
Let me see how can i show you a screen capture and send it, I think this would explain better the situation
Yes, when i click show in finder, it takes me to the HD and shows me the right folder the picture is in. The folders in the HD show the order and titles i defined on lightroom .. so the folders i defined in lightroom were registered correctly in the HD but are no longer shown in the folder panel in LR

UITableView re-order but not remove?

Hi!, I'm trying to make a UITableView that will have a re-order functionality but not delete.
I've implementer the
- (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath;
AND
- (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)sourceIndexPath toIndexPath:(NSIndexPath *)destinationIndexPath;
but i have the red minus on the left...
does anyone knows how to get rid of it?

Look at the delegate method 'tableView:editingStyleForRowAtIndexPath: and the data source method 'tableView:canEditRowAtIndexPath:'.
The docs clearly specify how to do what you want.

7th Gen iPod Classic was unplugged during sync, now it pops up in Windows Explorer, but not iTunes. How can I fix this?

Okay.
I have a Windows 7 x32 OS, and an 80gb Silver 7th Gen iPod Classic.
So, I bought an iPod used off of eBay and I recently decided that 80gb was a bit too much, so I was going to resell it on eBay and buy a smaller iPod.
While I was restoring it to set it back to factory settings, my computer shut off due to a power problem.
Now when I plug it in, I get a message from windows saying "You need to format the disk in drive :M before you can use it. Do you want to format it?"
It shows up in windows explorer as a Removable Disk, and it isn't being detected by iTunes. I plug it in the iPod says "Connected. Eject before disconnecting." with a symbol that it makes when it is syncing.
I've tried putting it in disk mode, and it still will not detect it.
Can somebody help me? I really don't want to be stuck with a broken iPod.
If anyone needs or wants any more information before they can advise, please feel free to tell me what you need to know and I will post it!
Thanks, and have a blessed day.

Hello b0nvivant,
Thank you for providing so much information about the iPod issue you are experiencing. I found an article with steps to take when your iPod is recognized in Windows Explorer but not in iTunes:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

Time Machine does manual backups but not automatic.

Time Machine skips automatic hourly backups but will do a backup if I click "Backup Now". Any idea why automatic backups are not working and how to enable them? Thanks.

Jan 14 04:10:17 myclienthost com.apple.backupd[18614]: Copied 16.0 GB of 17.4 GB, 462725 of 509959 items
Jan 14 04:16:21 myclienthost com.apple.backupd[18614]: Copied 504166 files (16.4 GB) from volume Macintosh HD.
Jan 14 04:16:26 myclienthost com.apple.backupd[18614]: 839.3 MB required (including padding), 253.24 GB available
Jan 14 04:16:46 myclienthost com.apple.backupd[18614]: Copied 1570 files (310 KB) from volume Macintosh HD.
Jan 14 04:16:50 myclienthost com.apple.backupd[18614]: Starting post-backup thinning
Jan 14 04:16:50 myclienthost com.apple.backupd[18614]: No post-back up thinning needed: no expired backups exist
Jan 14 04:16:50 myclienthost com.apple.backupd[18614]: Backup completed successfully.
Jan 14 04:16:54 myclienthost com.apple.backupd[18614]: Ejected Time Machine disk image.
Jan 14 04:16:54 myclienthost com.apple.backupd[18614]: Ejected Time Machine network volume.
Jan 14 05:11:18 myclienthost com.apple.backupd[19152]: Attempting to mount network destination URL: afp://[email protected]/Client%20Backups
Jan 14 05:11:20 myclienthost com.apple.backupd[19152]: Mounted network destination at mountpoint: /Volumes/Client Backups-1 using URL: afp://[email protected]/Client%20Backups
Jan 14 05:11:39 myclienthost com.apple.backupd[19152]: QUICKCHECK ONLY; FILESYSTEM CLEAN
Jan 14 05:11:42 myclienthost com.apple.backupd[19152]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Jan 14 05:12:58 myclienthost com.apple.backupd[19152]: Network destination already mounted at: /Volumes/Client Backups-1
Jan 14 05:13:14 myclienthost com.apple.backupd[19152]: Disk image already attached: /Volumes/Client Backups-1/My MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Jan 14 05:13:16 myclienthost com.apple.backupd[19152]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Jan 14 05:48:50 myclienthost com.apple.backupd[19287]: Starting standard backup
Jan 14 05:48:50 myclienthost com.apple.backupd[19287]: Network destination already mounted at: /Volumes/Client Backups-1
Jan 14 05:49:07 myclienthost com.apple.backupd[19287]: Disk image already attached: /Volumes/Client Backups-1/My MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Jan 14 05:49:09 myclienthost com.apple.backupd[19287]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Jan 14 05:49:09 myclienthost com.apple.backupd[19287]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Jan 14 05:49:13 myclienthost com.apple.backupd[19287]: 536.7 MB required (including padding), 251.29 GB available
Jan 14 05:49:38 myclienthost com.apple.backupd[19287]: Copied 1913 files (30.5 MB) from volume Macintosh HD.
Jan 14 05:49:39 myclienthost com.apple.backupd[19287]: 500.4 MB required (including padding), 251.29 GB available
Jan 14 05:49:43 myclienthost com.apple.backupd[19287]: Copied 185 files (128 KB) from volume Macintosh HD.
Jan 14 05:49:44 myclienthost com.apple.backupd[19287]: Starting post-backup thinning
Jan 14 05:49:44 myclienthost com.apple.backupd[19287]: No post-back up thinning needed: no expired backups exist
Jan 14 05:49:44 myclienthost com.apple.backupd[19287]: Backup completed successfully.
Jan 14 05:49:47 myclienthost com.apple.backupd[19287]: Ejected Time Machine disk image.
Jan 14 05:49:47 myclienthost com.apple.backupd[19287]: Ejected Time Machine network volume.
Jan 14 05:49:55 myclienthost com.apple.backupd[19287]: Attempting to mount network destination URL: afp://[email protected]/Client%20Backups
Jan 14 05:49:57 myclienthost com.apple.backupd[19287]: Mounted network destination at mountpoint: /Volumes/Client Backups-1 using URL: afp://[email protected]/Client%20Backups
Jan 14 05:50:17 myclienthost com.apple.backupd[19287]: QUICKCHECK ONLY; FILESYSTEM CLEAN
Jan 14 05:50:19 myclienthost com.apple.backupd[19287]: Disk image /Volumes/Client Backups-1/My MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Note, there are no backup log messages for the last few hours even if I put new files or change files on the client.

Ordered but not available

We order some product that has a 90 day lead time. Currently B1 shows this product as available to place on sales orders once a Purchase Order is written. Is there a way to not include ordered product in the available calculation?
Thanks,
Rob

Hi
In b1 stock will be calculated as follows
Available = In stock + Ordered - Committed
Regards
Rashid

OIM Event Handler Triggers on Manual Entry but not for Trusted Recons

Hi,
I'm having some trouble getting my plugin to trigger upon a reconciliation. I've developed a plugin to modify some Xellerate User attributes on the OIM Profile.
- I've created a custom package with some java classes that retrieve attributes being passed in, manipulates the data, and returns the data through an EventResult
- I have system.out commands in my BulkEventResult function to see when this function is triggered
- My Plugin.xml calls this java class, which has a plugin point of oracle.iam.platform.kernel.spi.EventHandler
- I've uploaded the plugin (development) by putting the plugin.zip in the /server/plugin folder
- I've created an event handler that calls the plugin class upon an operation = "MODIFY". It also contains entity-type="User", stage="postprocess", order="FIRST", sync="TRUE"
- I've imported this using the weblogic import utility, setting OIMMetadata, and loaded the file to /custom/iam-data/EventHandler.xml
Upon testing, I am able to see my system.out debug statements in the logs, and can see the data actually changing when I am logged into OIM making changes directly on the system.
I am unable to see any of this come through when I run a trusted OID reconciliation against the same user, manipulating the same fields.
From what I've read, all I needed to do was put the code in the BulkEventResult function. However, none of my debug statements are being triggered, causing me to believe that this event handler is not even being triggered upon a trusted recon.
Does anyone have any ideas why this is, or if I have a configuration somewhere that is incorrect?
Any help is very welcome!

Everyone,
Thanks for your help.
I found out the root of my issue: it was that my OPERATION was set to "MODIFY" in my EventHandler XML. It should have been "ANY". After I did this, it started to work.
As for registering plug-ins, you can actually drop the plugin zip file on the Oracle_IDM1/server/plugin directory for testing purposes, then re-import the EventHandler.XML you created.
I also found a few strange behaviors-
- If the order was too large (for example, 1000), it wouldn't trigger until the second time I updated it. I lowered the number to 50 and it kicked off every time.
- There is no purge cache needed when I re-imported the xml file after uploading the .jar again

Sites work using manual proxy but not with automatic detect

I asked this in the ISA forum but they said since the WPAD file isn't generated by ISA to cross-post over here.
We have an ISA 2006 build 5.0.5712 operating as our web proxy. We have WPAD configured both in DNS and in DHCP to point to this ISA server. There are two sites (rentsentinel.com and epmsonline.com) which when we use the 'Automatically detect settings' option
in IE8, it either gives red X's in part of the homepage (rentsentinel), or doesn't show the page at all (epms). If we manually specify the proxy settings for this same server, it works fine. It would also appear that one can browse fine on random sites, but
once we attempt to browse to one of these two sites, that further browsing to other sites no longer works, even those we visited in the same browsing session.
If I manually specify the http://wpad/wpad.dat file in the config field, no change in behavior. But if I use that same entry in Firefox, both websites render fine. Our wpad.dat is included below, with our internal domain
name switched to domain.com.
I'm looking for help on getting these sites working correctly with automatic detection. Thanks!
//Copyright (c) 1997-2006 Microsoft Corporation
BackupRoute="DIRECT";
UseDirectForLocal=true;
function MakeIPs(){
this[0]="127.0.0.0";
this[1]="255.0.0.0";
this[2]="127.0.0.1";
this[3]="255.255.255.255";
this[4]="159.10.3.201";
this[5]="255.255.255.255";
this[6]="159.10.3.202";
this[7]="255.255.255.254";
this[8]="159.10.3.204";
this[9]="255.255.255.252";
this[10]="159.10.3.208";
this[11]="255.255.255.254";
this[12]="64.244.122.129";
this[13]="255.255.255.255";
this[14]="66.45.70.181";
this[15]="255.255.255.255";
this[16]="10.0.0.0";
this[17]="255.0.0.0";
this[18]="128.0.0.0";
this[19]="192.0.0.0";
this[20]="192.0.0.0";
this[21]="224.0.0.0";
this[22]="240.0.0.0";
this[23]="248.0.0.0";
this[24]="248.0.0.0";
this[25]="252.0.0.0";
this[26]="252.0.0.0";
this[27]="254.0.0.0";
this[28]="254.0.0.0";
this[29]="255.0.0.0";
this[30]="255.0.0.0";
this[31]="255.128.0.0";
this[32]="255.128.0.0";
this[33]="255.192.0.0";
this[34]="255.192.0.0";
this[35]="255.224.0.0";
this[36]="255.224.0.0";
this[37]="255.240.0.0";
this[38]="255.240.0.0";
this[39]="255.248.0.0";
this[40]="255.248.0.0";
this[41]="255.252.0.0";
this[42]="255.252.0.0";
this[43]="255.254.0.0";
this[44]="255.254.0.0";
this[45]="255.255.0.0";
this[46]="255.255.0.0";
this[47]="255.255.128.0";
this[48]="255.255.128.0";
this[49]="255.255.192.0";
this[50]="255.255.192.0";
this[51]="255.255.224.0";
this[52]="255.255.224.0";
this[53]="255.255.240.0";
this[54]="255.255.240.0";
this[55]="255.255.248.0";
this[56]="255.255.248.0";
this[57]="255.255.252.0";
this[58]="255.255.252.0";
this[59]="255.255.254.0";
this[60]="255.255.254.0";
this[61]="255.255.255.0";
this[62]="255.255.255.0";
this[63]="255.255.255.128";
this[64]="255.255.255.128";
this[65]="255.255.255.192";
this[66]="255.255.255.192";
this[67]="255.255.255.224";
this[68]="255.255.255.224";
this[69]="255.255.255.240";
this[70]="255.255.255.240";
this[71]="255.255.255.248";
this[72]="255.255.255.248";
this[73]="255.255.255.252";
this[74]="255.255.255.252";
this[75]="255.255.255.254";
this[76]="255.255.255.254";
this[77]="255.255.255.255";
DirectIPs=new MakeIPs();
cDirectIPs=78;
function MakeCARPExceptions(){
CARPExceptions=new MakeCARPExceptions();
cCARPExceptions=0;
function MakeNames(){
this[0]="gracehill.com";
this[1]="*.cna.com";
this[2]="*.itsolutions.com";
this[3]="*.rentsentinel.com";
this[4]="domain.com";
DirectNames=new MakeNames();
cDirectNames=5;
HttpPort="8080";
cNodes=1;
function MakeProxies(){
this[0]=new Node("hades-1.domain.com",0,1.000000);
Proxies = new MakeProxies();
function Node(name, hash, load){
this.name = name;
this.hash = hash;
this.load = load;
this.score = 0;
return this;
function FindProxyForURL(url, host){
var hash=0, urllower, i, fIp=false, ip, nocarp=false, skiphost=false;
var list="", pl, j, score, ibest, bestscore;
urllower = url.toLowerCase();
if((urllower.substring(0,5)=="rtsp:") ||
(urllower.substring(0,6)=="rtspt:") ||
(urllower.substring(0,6)=="rtspu:") ||
(urllower.substring(0,4)=="mms:") ||
(urllower.substring(0,5)=="mmst:") ||
(urllower.substring(0,5)=="mmsu:"))
return "DIRECT";
if(UseDirectForLocal){
if(isPlainHostName(host))
fIp = true;}
for(i=0; i<cDirectNames; i++){
if(shExpMatch(host, DirectNames[i])){
fIp = true;
break;}
if(shExpMatch(url, DirectNames[i]))
return "DIRECT";
if(cDirectIPs == 0){
if(fIp)
return "DIRECT";}
else{
ip = host;
if(fIp)
ip = dnsResolve(host);
var isIpAddr = /^(\d+.){3}\d+$/;
if(isIpAddr.test(ip)){
for(i=0; i<cDirectIPs; i += 2){
if(isInNet(ip, DirectIPs[i], DirectIPs[i+1]))
return "DIRECT";}}
else if(isPlainHostName(host))
return "DIRECT";
if(cCARPExceptions > 0){
for(i = 0; i < cCARPExceptions; i++){
if(shExpMatch(host, CARPExceptions[i])){
nocarp = true;}
if(shExpMatch(url, CARPExceptions[i])){
nocarp = true;
skiphost = true;
break;
if(!skiphost)
hash = HashString(host,hash);
if(nocarp)
hash = HashString(myIpAddress(), hash);
pl = new Array();
for(i = 0; i<cNodes; i++){
Proxies[i].score = Proxies[i].load * Scramble(hash ^ Proxies[i].hash);
pl[i] = i;
for(j = 0; j < cNodes; j++){
bestscore = -1;
for(i = 0; i < cNodes-j; i++){
score = Proxies[pl[i]].score;
if(score > bestscore){
bestscore = score;
ibest = i;
list = list + "PROXY " + Proxies[pl[ibest]].name + ":" + HttpPort + "; ";
pl[ibest] = pl[cNodes-j-1];
list = list + BackupRoute;
return list;
var h_tbl = new Array(0,0x10D01913,0x21A03226,0x31702B35,0x4340644C,0x53907D5F,0x62E0566A,0x72304F79,0x8680C898,0x9650D18B,0xA720FABE,0xB7F0E3AD,0xC5C0ACD4,0xD510B5C7,0xE4609EF2,0xF4B087E1);
function HashString(str, h){
for(var i=0; i<str.length; i++){
var c = str.charAt(i);
if(c ==':' || c == '/') break;
c = CharToAscii(c.toLowerCase());
h = (h >>> 4) ^ h_tbl[(h ^ c) & 15];
h = (h >>> 4) ^ h_tbl[(h ^ (c>>>4)) & 15];
h = MakeInt(h);
return h;
function Scramble(h){
h += ((h & 0xffff) * 0x1965) + ((((h >> 16) & 0xffff) * 0x1965) << 16) + (((h & 0xffff) * 0x6253) << 16);
h = MakeInt(h);
h += (((h & 0x7ff) << 21) | ((h >> 11) & 0x1fffff));
return MakeInt(h);
var Chars =" !\"#$%&\'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~€???????????Ž????????????ž? ¡¢£¤¥¦§¨©ª«¬®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõö÷øùúûüýþ ";
function CharToAscii(c){
return Chars.indexOf(c) + 32;
function MakeInt(x){
x %= 4294967296;
if(x < 0)
x += 4294967296;
return x;

Hi,
Sorry for the late response.
Since the issue is complex and difficulty to troublshooting, we discussed for some time corssing the specialty. Here is some direction we may let you know to do further troubleshooting:
capture network trace to confirm whats happening across the wire.
confirm the wpad.dat is the expected.
If you have any difficulty when doing this, we suggest you to contact with IT Pro Support via the link below:
http://technet.microsoft.com/en-us/ms772425?WT.mc_id=SMCfoot_ENUS_TEXT
I think it can help you define the root cause via some deeper tools due to the complicated symptom you have.
I appreciate your understanding and time.
Best Regards,
Annie Gu

TS1538 hay im connecting my iphone to my computer and it pops up in my computer but not in itunes i updated itunes and my phone and still nothing please help

please i forgot my password and i need to reset my phone. please help me

Hey seelkodoomx360,
Thanks for the question. It looks like you are on the right track, as you have posted from the most relevant article. Have you attempted to restart the Apple Mobile Device Service?
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
I would also recommend Steps 5 and 6 of the article you came from:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Share Calendar but NOT Reminders

I have an iCloud account where I coordinate my email, contact and calendar in order to sync between my iMac, iPhone and iPad.
I also sync that calendar with my wife's MacBook and her iPhone.
This all works, but one thing is annoying. When I set a calendar event to have a reminder, it pops up on my iMac, my iPhone, my iPad, her MacBook and her iPhone. Is there any scenario I could be using so I can have a single calendar event but specify where the reminder will pop up? For example, if I want to be reminded about an upcoming doctor appointment but she does not need to be bothered by the reminder, or if she wants to be reminded about an upcoming manicure, but I do not want to be bothered?
I have seen some discussion about having multiple calendars (e.g. one for me and one for my wife), and then sharing them. If I did that, I believe the reminders would only pop up on the devices that own the events. BUT, would it allow us to "share time". For example, since we have only one car, we need to be able to coordinate appointments, simple on one calendar, but perhaps not so on multiple. Also, scheduling events would be difficult, potentially because of access issues (read/write vs. read only).
It seems one calendar with read/write access for both makes the most sense, but I get tired of being interrupted by her reminders, and she especially gets tired of seeing mine, which easily outnumber hers 10 to 1.
If no scenario exists, I would like to suggest to Apple to allow the ability to direct reminders to specific devices. Then, not only could I set reminders for my iMac or her MacBook, but I might also be interested in having certin reminders pop up on my iPhone but NOT on my iPad.
Any suggestions?

I strongly endorse William's plea to add this functionality. My whole family shares calendars, and NEED the ability to personalize the reminders. Hello Apple?!!

Pop up in manual orders but not in EDI

Similar Messages

Maybe you are looking for