POP3 Scanning using Ironport C360

Hi all,
Is it possible to use Ironport for scanning POP3 mails. Kindly Suggest. What we mainly want to achieve is to block POP3 mails from a defined AD group.
Regards
Akash

Hi Akash,
as I discussed with the ironport suppot one year ago, this is not possible. If you need this function there is a antispam box from Barracuda which can download messages via pop3, scan them and forward afterwards.
Regards Roland

Similar Messages

I can no longer scan using HP d110 after Mavericks

I have tried so many work-arounds to fix this issue! I've read countless threads, deleted and re-installed drivers (although according to mac and hp, this wasn't necessary), I've tried scanning using the Print/Scan utility, Image Capture, Preview and Webscan and NOTHING works. The scan begins (so I know that the printer and communicating) but then I get an error message that says "An error occurred while communicating with the scanner."
My printer works fine. But scan - which worked just fine before installing Mavericks - no longer works. Help!

Hi urbanfitchick,
I understand that you are getting a scan error. I will do my best to help you resolve this issue in Mavericks. I suggest trying to do a copy from the printer, this is to establish that the scan function is working properly on the printer. If you cannot do a copy then there is a problem with the scanner hardware and we will have to address that issue first. If there is no problems doing the copy then I recommend that you power cycle the network.
How to power cycle network
Follow these steps to reset your HP printer, your wireless router, and your computer.
1.Press the Power button on the HP printer to turn it off.
2.Disconnect the power cord from the rear of the HP printer.
3.Disconnect the power cord from the wireless router.
4.Turn off the computer.
5.Wait 30 seconds.
6.Reconnect the power cord to the wireless router.
7.Wait 30 seconds, or until the router is fully on and ready.
8.Turn the computer back on.
9.Wait for the computer to reload.
10.Reconnect the power cord to the rear of the HP printer.
11.Turn the printer back on.
Then reset the Printing System
Resetting the Printing System in Mac
Open System Preferences > Printers & Scanners > Print
Hold down the Option key while clicking the "-" (Remove printer) button.
If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu
Once you have the printer installed here is a document on How to Scan: OS X v10.9
LINK: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967500&tmp_task=useCatego ry&cc=us&dlc=en&lc=en&product=4023246
I am including this link for other options for scanning as well.
LINK: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Officejet-7310-All-i n-One/m-p/3081523#M73430
I hope this helps, let me know.
Thank you,
Advance 23
I work on behalf of HP

Would like to scan using older scanner

Hello to the Mac family,
Once again I am stuck. I have been a very longtime user of 9.2. I really loved it. Well my slot load 350 finally died. I bought a new I-mac running X.5.2.
I have an old Epson perfection 636U scanner. I would love to be able to scan into Photoshop with this scanner. Money is now really tight so I need to be able to get this to work if possible.
I must say I wish my old apps like "Sound Jam, Pagemaker etc. worked on this new computer.
I went to the Epson site and see that the drivers are for 8.6 to 9.2. I figured these won't work on X.
There must be some sort of generic Twain driver or something that will let me scan.
This is where I need gentle help. If there is a way to scan using this could someone please advise.
Also please remember that I am a total newbie to X. In 9.2 I could download and install to the P.S. prefs folder or put the driver into import/export folder. I knew how to do all that but on X I am having trouble just doing little things like finding my music.
I really would appreciate it if someone could offer step by step help. The scanner is old but it works great. I know I won't have my OCR software etc. I just need to be able to scan pixs to PS.
Thanks for taking the time to read this.......mGb,,,..,,,,,,,,,Jim

Hello Dennis,
First...thanks for the help. I followed your suggestion and I thinkI did it right.
I tried to use the scanner but it doesn't see a scanner. When I go into Photoshop or Imageready, I can select the Twain drivers that are listed from the download. I see 5 drivers and have selected each one. When I select the 640 and try to import it says no device. I did this with all 5 and still no luck.
I rechecked all my connections and have the scanner plugged directly to the computer (no hub).
It really seemed like it would work. Prior to this I had no Twain devices listed.
Do you have any other ideas. I really need to scan and my wife will never OK the purchase of a new scanner. The computer was a large investment for us. It seems as though I should be able to get this scanner to work. I am 100% certain the scanner is good.
As far as the new OS, I am pretty sure in time I will love it. For now it is hard to navigate. In 9.2 I used the exten manager quite a bit. I could trash prefs when having trouble, I knew where most everything was located on the HD. It is just going to be a change and I am not real good with change. Kinda like an old pair of boots, you get to love them......
If you have any other ideas I would really appreciate it, as my wife has several pixs she wants me to scan. These are of recently deceased family members so this is important.....Thanks......mGb.....Jim

Can't scan using front panel of HP Officejet Pro 8600 Plus

I can't scan using front panel or laptop. I can't find the set up disc that came with the printer that I purchased almost 2 years ago.

Hello @Pierre1 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues scanning. I'd like to help!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Scanning using LaserJet Pro M1217 nfw MFP

Product: HP LaserJet Pro M1217nfw MFP
Mac OSX - Mountain Lion
I would like to scan using this printer. I can not find a reliable method. Any suggestion?

I just figured this out!! So happy!! I am using Windows, so not sure if this will help you MAC users (hoping to be one soon, haha). Here are the instructions I followed:
Place the document to be scanned either in the feeder or on the flatbed glass
Click Start
Click Programs (or All Programs depending on software)
Click HP and select your product (in this case, HP Color LaserJetPro MFP M177 fw)
Click HP Scan, select a scanning shortcut (e.g.: save as PDF), adjust settings as desired
Click Scan
And voila! You will have your scanned document saved on your computer for emailing, etc.

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

Hi Shlomi
It worked!!! Thanks so much, I've been messing about with this for hours.
As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
Any thoughts you have would be much appriciated
Rob

Scans using the Printer/Scanner utility in MAC OS 10.9 disappear.

Hello,
I am having new issues with scanning documents on my HP Photosmart Premium Series C309 All-in-One printer/scanner.
I have been able to successfully scan and save documents, but just recently, something happened. It appears the scanner is successfully scanning the documents, and I am able to inpput my "save to" information, but the documents are now disappearing into cyber space.
I am operating wirelessly via a Mac Book Pro with OS 10.9 (I believe).
Can someone guide me to what is going wrong and what to do about it please? I've tried using the utilities and help available online and in my computer
Thanks,
Spirit Dancer

Hi Spirit Dancer,
You may scan using Image Capture or Preview, the HP Scan application for your printer is not intended for Mavericks and such save issues are expected.
Follow the workaround below to scan from your printer to Mac OS X 10.9:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&dlc=en&docname=c04028214&lc=en&jumpid=reg_r1002_uk...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When I scan using an HP ScanJet 8390 using Twain Driver in Acrobat 9

When I scan using an HP ScanJet 8390 using the Twain driver the scanned image comes in wrong.
Please see images.
HP 8390 using the Twain driver gives me this result.
HP 8390 using the NON Twain driver gives me the right size page. How come the Twain driver does not? It worked fine in Adobe 8.

Hi,
The 3210 model only supports 35mm negatives, it does not support any larger negatives.
You may find its Scan Specifications listed below:
http://support.hp.com/us-en/document/c00408357
Also the 3970 only support 35mm negative scanning, tiy may find its Transparent Materials Adapter (TMA) specifications listed below:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00005741
I afraid that 110mm negatives are not supported by any of the scanners.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How fix blank lines on scans using MF5770

how fix blank lines on scans using MF5770. Already restarted Win 7 computer and MF5770. Using Windows fax and scan. Several months of successful use before this problem began last couple weeks. 9/2014 Thnks for any help

Patrice,
Thanks for your reply and questions. See my responses in the body of your text pasted below
So that we can better assist you, how is the printer connected? Is it connected directly to the computer with a USB cable,YES ITS CONNECTED BY A USB CABLE LESS THAN 10' LONG FROM THE BACK OF THE MF 5770 TO A USB PORT ON THE BACK OF MY DESKTOP COMPUTER or with a LAN cable to a router? If it is connected with a USB cable, how long is the cable, and are there any devices,NO DEVICES such as a USB hub or extender, connected between the printer and the computer? Finally, which version of Windows 7 are you running on your computer? Is it the 32-bit or 64-bit version? 64 BIT VERSION SERVICE PACK 1 PROCESSOR AMD PHENOM II X4 810 2.61 GHz INSTALLED MEM 4 GB
Chip Hazel
[Mod note - removed personal information PER FORUM GUIDELINES]

HP 4625 - scanning using doc feeder - a bit misaligned

my problem is whenever i scan using the the doc feeder, the result is a bit misaligned, just a bit but it really annoys me, please please help,
using the flatbed is ok
can i adjust it myself?? any manual on how to do this??
my only conclusion is that when it pull the paper, it does not pull it uniformly..

Hi Halim_iv,
Thank you for your reply!
This guide definitely should help with your document feeder issue. 'The original has jammed or the document feeder (ADF) is dirty. To remove the original . . .' Messag....
Please follow that guide, and let me know what happens, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Scan using estation photosmart

When I start to scan using the printer Estation all in one photosmart it directs me to start software on computer that came with it... What software is it speaking of? Also how do you scan docs using the scanner to be able to open the scanned item on the computer ex. I am trying to scan transcripts it is only allowing me to scan them through windows photo gallery then they are jpeg files..I need them in pdf format.... Help please!

I hope you are doing well and welcome to the forum;
This is the software that came with the printer you can download form here GO HERE (Dowloading in my personal experience and modest opinon is better than using the CD that came with the printer due to the fact that the dowload will include latest changes to the software) updates.
You can use the cd as well.
Here you have eReader that should provide that capability for you. another alternative is to use a 3rd party PDF solution Can not recomemded any but a quick google search with the word "review" will provide you alternatives and with user reviews. and you can also use software such as MS office open the Jpeg there as save as PDF.
This is the manual of your printer in case you don't have it http://h10032.www1.hp.com/ctg/Manual/c02555102.pdf
aunt wrote:
"I am trying to scan transcripts it is only allowing me to scan them through windows photo gallery then they are jpeg files..I need them in pdf format.... Help please"
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

I still get a firefox security alert that my system affected by numerous virus attack even after I performed a full scan using microsoft security essential. what is the problem?

I get a firefox security alert that my system affected by numerous virus attack. I performed a full scan using microsoft security essential immediately but same message still pop up after that even though no virus was found during the scan.

You may be visiting a web site that has been infected or is hosting malware.<br />
You should never respond unrequested pop-ups that try to persuade you to download and install software.<br />
Doing that is the way to get malware because no decent company would use such methods to inform you about that.<br />
You only saw an animation and not a real scan.<br />

Since I upgraded to OS X 10.9.5 I cannot scan using my HP Photosmart 5510 printer. Is there a patch available to fix the problem?

I cannot scan using my HP Photosmart 5510 series wireless printer since I upgraded to OS X 10.9.5. Is there a fix?

Try resetting the printing system.
OS X Mavericks: Reset the printing system
Also try Applications/Image Capture or VueScan.
VueScan
VueScan FAQ

How do i scan using a deskjet f4180

How do u scan using a deskjet f4180

Hello,
Please click on the below link to access steps that should let you scan using Deskjet F4180 on Vista PC.
F4180 Scan Vista
Or Copy Past the below URL in Browser to access the same .
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02463264&cc=us&dlc=en&lc=en&product=3177566&tmp...
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution! <-------
See a great post? Give it a Kudos! <--------
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

5510 will not scan using Mac OS X version 10.9.5

Since I upgraded to Mac OS X version 10.9.5 I can no longer scan using my HP e - all in one B111 printer. Is there a patch to fix the problem?

Hello there! Welcome to the forums @lilypants ,
I understand you have upgraded to Mavericks and are no longer able to scan, using your Photosmart 5510. I have some suggestions for you below, that might help.
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Install the Full Feature driver: HP Photosmart 5510 e-All-in-One Printer Full Feature Software and Drivers
In addition, download this driver: HP Printer Drivers v3.0 for OS X
Now try scanning and it should work
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

POP3 Scanning using Ironport C360

Similar Messages

Maybe you are looking for