Populating the key figure in the Cube

hi frineds,
     I need to populated the custom key fiugre added by me in the cube using the update rule. But if i see the tables of the cube it is seperate for every dimension and key figure. how can i select the particular record from the key figure table with out the reference of the dimensions table.
Thanks
Prem

so you want to
1. read particular record from cube
2. populate the amount there.
but populating the amount directly to infocube is not advisable and not feasible as well.
my suggestion will be virtual infoprov based on transformation
you will have to write your logic there and you can populate the amount based on billing number (you said you have amount against billing number).
at query runtime based on transformation/logic your amount will be populated.
only drawback reduced query performance

Similar Messages

  • Can we suppress the key figure from the filter values?

    Hi,
    I have one restricted key figure.
    1) Is it possible to hide the key figure for calender year 2009 and display it for year 2010. I mean can we hide the column dynamically?
    2) Can we grey out the key figure from filter criteia so that it cannot be checked for specific calender year?
    eg if i have 3 key figures as One , Two , Three.
    In filter , it will show One , two ,  three  and the checkbox . Is it possible to grey out the checkbox so that user will not be able to check it or tick it?
    Regards!

    Hi,
    1) I don't think we can hide it dynamically.
    2) I dont think we can give such a option in the query designer.can you explain what is ur exact requirement.
    Regards,
    Ravi

  • Setting the values of the key figures

    Hi,
    I have a problem in a query. There is a variable chosen with a range for 0calmonth. For the two of the key figures, I need to restrict the key figure to the first period and for the other key figure I need to restrict to the last period. However, what I need more is that if in the restricted period there is no value for that key figure it should get the first period that it has a value. For example:
    Our variable set as: 02.2006   -  05.2006
    And our data is
         CalMonth          KeyFig1     KeyFig2
    A     02.2006                 0            7
    A     03.2006                 0           8
    A     04.2006                 4            9
    A     05.2006                  5            0
    I want to see in the query as:
                  KeyFig1    KeyFig2
    A              4                9             
    When I add the results with first value and last value, I can see these figures in the general results section. But this time I have to hide the key figures and show only the results section.
    Any idea on preparing such a query?
    Thanks in advance...

    Hi,
    try using conditions:
    http://help.sap.com/saphelp_nw70/helpdata/en/43/2695d2fd2f0d23e10000000a1553f7/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/43/b57138c1afbd20e10000009b38f889/content.htm

  • New Formula as a Key Figure in the New Selection

    Hi,
    In the Cell Editor, is it possible to include the New Formula as the Key Figure in the New Selection?
    Please find below the Cell Editor. I have just given the sample of my requirement.
    Column A                                         Column B
    A1) Net Sales ( Cell Reference)             B1)
    A2)                                             B2) Inventories ( Cell Reference)
    A3)                                             B3) Inventory Days ( New Formula)
    A4)                                             B4)
    My Requirement is in the Cell B4 I want to create a New Selection in which the Key Figure should be the Inventory Days ie the cell B3.
    Is it possible to include and if so how.
    Thanks,
    Rajesh Janardanan

    Hi,
    Yes you can change this display by following path in tcode :spro
    Goto >SPRO>SAP Reference IMG>SAP Netweaver>Business Intelligence>Settings for reporting and analysis>General settings for reporting and analysis--> Set alternative currency display(table RSRCURRDISP).
    Flag = A     After value
    Flag = B     Before value
    hope it helps..
    regards,
    Raju

  • Sort the Key Figure and put a count on it

    Hi Experts,
    I have a  situation where I have to sort the value of the Key Figures in ascending order and put a count on them.
    Kindly elaborate me a little on this.
    Thanks in advance,
    Kannan

    Hi Kannan,
        If you want to do this setting at the Query Designer level, then select the Properties section for the
    desired Key figure say K1.then select the "Calculations " tab.  Under the Local calculations for "Calculate Results as" select "Counter for all detailed values".Save the query.
    Open the query (say) at Bex Analyzer. From  the context menu for the key figure K1, select "Properties"-->then under Sorting tab select the required order.
    The options mentioned above, i.e  "calculations" and "Sort" is available on web too in the context menu for the key figure.
    The above mentioned setting wil be a display setting>You can modify it as per your requirement at Query Designer.
    NOTE:
    If your requirement is such that K1, should always display the counter , then while creation of the K1 itself , you can select the Exception Aggregation of Type "Counter(all values)". Then, the setting will be permanent.(design time)
    Hope the information helps!
    Best Regards,
    Akshata
    Edited by: Akshata Shenoy on Jun 2, 2009 12:25 PM
    Edited by: Akshata Shenoy on Jun 2, 2009 12:27 PM

  • Query Designer - Key Figures on the Rows

    Hi experts,
    I inserted in a query the key figures into the rows.
    I would like to see on the report the "KEY" of these key figures and not the "TEXT", but I can't find a way to do that.
    Can anyone help me?
    TIA
    c.

    Hi,
    I developed the couple of reports but iam able to see the text in char and can u tell me where is  the option to see key and text for keyfigure.if not is not theere explanin little bit and busines requirement
    would like to see on the report the "KEY" of these key figures and not the "TEXT", but I can't find a way to do that.

  • Key Figure value in Cube showing with extra zeros

    Loaded data into the cube. When I display the result
    Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
    Original value
    Price, Quantity, Sales Rev
    2     1     2
    3     2     6
    When display value from cube
    Price, Quantity, Sales Rev
    2,00     1,000     2,00
    3,00     2,000     6,00
    Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
    Thanks,

    Hi,
    These are the zeroes after the decimal places. this is the property of the key figure.
    In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
    Hope it helps.
    Regards,
    Gaurav
    Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM

  • To delete and insert a new key figure in the cube

    Hi Experts...
                 How can I delete a key figure and insert a new key figure into a cube with data...? Should I be creating a new cube with the new key figure ?
    Thank you..
                Manohar....

    Hi
    Are you using Bi2004s
    yes you can delete,add,replace a key figure
    have a look at this blog for step by step procedure
    /people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
    hope this helps

  • Do i have to select all the key figures when i design a query off of a cube

    Do i have to select all the key figures when i design a query off of a cube? i have three keyfigures on the top of the three keyfigures it says calculated keyfigure. kind of lost dont know what to do. please let me know.
    Thanks!
    York

    No, you have to select at least one.
    Calculated keyfigure (CKF) means it's a formula of two or more other keyfigures. You can select, right-mouse click, display properties and you see how it is composed.
    Under calculated keyfigures you see all available keyfigures of the infoprovider you build the query on. Just move them by drag-and drop from the left to the right into the columns.
    You can have also restricted keyfigures (RKF). This means a keyfigure is restricted by one or more characterstics and their values.
    Hope you got an idea.
    Regards,
    Juergen

  • Added new key figure in the report

    Experts,
    I have added new key figure in the report .If i display this key figure value in the report it is populating correct value with ERROR(example 22.5 ERROR).The report is on the multiprovider .i have check the value for this in multiprovider it is populating correctly .There is no calculation in the report for this .While extracting in to report i am getting this. Help me to resolve this issue.
    Thanks
    Murali

    Hi,
    I have already created a formula like NODIM(Key field).that only i am using .
    and mapping I did in this way. I went to multiprovider and I have selected this key figure and right click and select (assign) then I have click on create proposal for all infoobjects option.
    Please suggest any thing need to do.
    I am sorry .I did not understand the lonterm solution suggested by you .what is UOM .Please tell me how to map.can you pls tell me clearly please
    Thanks
    Murali

  • Can we filter the Key figure ( by not using Bex Conditions)

    Hello Friends,
    I have a requirement in which I am passing the result of one query "A" to another query "B" ( using replacement path). Also there is a requirement to filter the keyfigure of the query "A"
    Problems I face:
    1) If I use Conditions, it does'nt filter the actual rows from the info cube, but just the query result
    2) Hence when I pass the query result of "A" to query "B", it sends more records which I dont need.
    Question:
    Hence is it possible to filter the keyfigure values at the database level?
    Thanks... Hope some one will guide me.....................

    Hi,
    I've had a similar problem in the past, not specifically for a replacement path but because the number of rows returned by the query was too great to use conditions. In the end what I did was create a characteristic char version of the key figure that was loaded from the same source as the key figure. You then effectively have a key figure that can be filtered in the same way as a normal characteristic.
    Hope this helps.
    Gareth

  • Poplulate key figure thru the start routine

    Hi Experts,
    I have update rules for my cube. In the start routine there, if i wrote abap code would it automatically fill the value of key figures in the cube. Can we do that with the ABAP code ?
    Or do i have to go to each key figure's routine and then refer to the internal table data in the update rules etc.
    If someone has done this before, would you pls walk me thru it.
    Thank you,
    T

    Hi Tia Ismail,
    I hope it is wrong to update the cube fields directly in the start routine.
    i,e
    <i>add DATA_PACKAGE-/bic/zslsgm to /bic/ft_mismets-/bic/Zslsgm.
    add DATA_PACKAGE-/bic/zsalesamt to /bic/ft_mismets-/bic/Zsalesamt.
    add DATA_PACKAGE-/bic/zinvlines to /bic/ft_mismets-/bic/zinvlines.</i>
    The above statements are wrong.
    Then start routing you will update the values (from blank to some value) for these fields. And also make 1 to 1 mapping Between these KF of info cube to Fields of Communication structure. i,e
    Zslsgm(Info cube KF) <---> Zslsgm(Communication structure field)
    Zsalesamt(Info cube KF) <---> Zsalesamt(Communication structure field)
    zinvlines (Info cube KF) <---> zinvlines(Communication
    structure field)
    The code you have to use in Start routine is :
    tables: /bic/pzproduct,
    /bic/ft_mismets.
    DATA ITAB like /bic/pZproduct occurs 0 with header line.
    select * from /bic/pzproduct into table itab where /bic/zproductlike 'misc%' and /bic/t_miscper is not null.
    Loop at DATA_PACKAGE.
    Loop at itab where
    /bic/zproduct <> DATA_PACKAGE-/bic/zproduct.
    DATA_PACKAGE-/bic/zslsgm = 0.
    DATA_PACKAGE--/bic/zinvlines = 0.
    DATA_PACKAGE-/bic/zsalesamt  = 0.
    Modify DATA_PACKAGE.
    endloop.
    ENDLOOP.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by: Anil Kumar Sharma

  • Please let me know how to see the details related to the Key figure used

    Hi,
    Basic key figure BHSL-I belonging to the table GLPCT is used in the one of the reports created using the Report Painter.
    Please let me know how to see the details of the BHSL-I key figure.
    Details I am looking for is, how the field BHSL-I is getting populated I mean from which field/fields combinations and what is the formulae involved in the calculation of the key figure.
    Please let me know if any documentation exists about the key figures.
    Thanks in Advance.
    Madhuri.

    What model year is it? If older than a 2011 model, and even some early 2011 models, you will need the original install discs that came with it.
    If older than a 2011 model then you use the Online Internet Recovery system to erase the drive, format it Mac Extended and then reinstall OS X.
    To access that online recovery system at startup hold down the Command + Option/Alt + r key and keep them held down until you see a globe on the screen.

  • Business Process: Final Demand Plan Key Figure in the past for APO DP

    Hello APO process experts,
    I have a BPX question for APO DP process owners, consultants or gurus:
    1.- Have you ever seen in any SAP APO customer, that in their APO DP planning books, they chose or designed to update the Final Demand Plan key Figure in the past closed historical buckets with the Actual Sales?
    Meaning that that in the Past closed historical Buckets, Actual Sales and Final Demand Plan, look exactily the same.
    Meaning that they create a dynamic Final Demand Plan key figure so to speak, yet they did not choose to create a key figure that also keeps the Final Demand Plan as originally entered.
    2.- Would you think that doing the above, without keeping any keyfigure in the planning book that actually shows what the Final Demand Plan was in the Past, is a good practice?
         The Demand Planner could still retreive the Final Demand Plan from BI reports, yet, dynamically they could never really see it in the planning book.
    3.- Do you think the above dynamic key figure would bias the Demand Planner's behaviour to manipulate the future open Final Demand Plan buckets to enter volumes in order sum to a monthly total, independently of what were the over and underachievements in the past (since they are not really visible to him) ?
    I would really like your feedback,
    thanks in advance!
    JD Loera

    Hello Thanks for your feedback.
    I agree with your point, and I hope that i still get more feedback from other Business Process Experts.
    I am trying to build a case for my client, to challenge the decision of their initial design as this practice is going to hurt the Demand Management process, if what they intend to achieve is a true "unconstrained demand plan"
    Much appreciated
    JD Loera

  • Fiscal year in the columns outside the key figure structure

    Dear Experts
    I have a report requirement to show the keyfigures in the columns from year 1 to year 10 and in each year there are 4 keyfigures each restricted to 1 quarter for 4 quarters.
    So, there are too many keyfigures to create.
    I am using fiscal year in the columns outside the Key figure structure containing the keyfigures restricted at each of 4 quarters.
    So, when the report displays, all the 10 years will automatically be displayed.
    The problem is one of the 4 quarter level keyfigures needs to be restricted by calendar year.
    How can I read what is the fiscal year for each column at runtime so that I can reference this value to determine the calendar year ?
    As you know, each FY spans 2 Calendar Years. So, i need to restrict this on the 4th keyfigure by calendar year but while having the FY outside the keyfigure structure i can get all the FY, I am not sure how to access this value at runtime so that eg.
    if FY for column 1 is 2010, i can set calendar year to be 2010 to 2011.
    Hope you can give me some clues.
    Thanks you Gurus!
    Best regards
    John

    Dear Sunnybt
    Copy Riyes,  I find your response interesting. Please could you elaborate your idea of using condition in more detail.
    Sorry for my late response.
    Allow me to clarify my statement, which you are right, is unclear.
    By :
    "if the current QuarterFY is less than the current QuarterFY"
    I mean :
    eg. user enters FY range : 2009 to 20NN  (eg. 2017)
    KF_column1_FY2009_Q1______KF_column2_FY2009_Q2____KF_column3_FY2009_Q3______KF_column_FY2009_Q4______KF_column_FY2010_Q1______KF_column2_FY2010_Q2____KF_column3_FY2010_Q3______KF_column_FY2010_Q4_____KF_column_FY_NNNN_Q1
    For each column, where the FY can be any year range entered by user,
    the Text Description of the Column should show either 'Actual' or 'Plan' based on what is the current FY Quarter at runtime.
    If the FY Quarter (eg. 1st column is 200101) is before current FY Quarter (i.e 201103), then the Description of this column should be "Actual" , else "Plan".
    In my current design, I am unable to use customer exit text variable to meet this requirement.
    So, I like to check with you for fresher ideas.
    If not , I would use a workbook, which I am avoiding as the user needs to drilldown and I believe drilldown is not possible in workbooks where report layout needs to be rigid or cell positions fixed. Of course, unless there is a way out of this which I do not know.
    Best regards
    Bass

Maybe you are looking for