Popup content not displaying after doing a rollback using savepoint feature

Hello everyone,
I have a pop up window which has a taskflow embedded as a region. This taskflow has an activity which does the rolling back of changes done in the task flow using the restore save point feature.
I have a cancel button on the pop up and it is bound to the cancel activity so that when the user clicks on the cancel button, the changes are discarded and the popup is closed(using a managed bean).
I am able to discard the changes using this feature.
My problem is when I try to invoke the same popup in the same session, only a very small panel window appears and nothing else.
This happens only if I do the rollback feature. Just closing the pop up without any changes and reopening works.
I tried several ways and can't find a solution to this problem. Can any one help ?
thanks
AC
Edited by: user723140 on Nov 25, 2008 1:27 PM

Hi,
restore to savepoints happens when you exit the bounded taskflow with a return. So in your case you are actually closing the taskflow, which is not what you should do in a region. This is why it comes up empty. What you can try is to
- set the popup loading to lazyUncached
- set the refresh on the region container to ifNeeded
- set the refresh condition to some value reference that changes with each call to region (e.g. a managed bean that returns the time in ms)
Not sure if this will re-create the taskflow, but chances are that it does
Frank

Similar Messages

  • Folder contents not displayed - Is this a bug or a feature?

    If I import a complete folder structure from my harddisk (referenced file mode), I get a neatly reproduced folder structure in the Aperture project window. However, if I click on of the folders, no pictures are displayed in the Aperture browser. Apperently, you have to click on the automatically created albums within the folders to see the pictures.
    Am I doing something wrong or is this (another) badly implemented feature of Aperture?

    Feature. But not a very good one.

  • My iBook will not display after Power up Chime

    Please I need Help.
    My iBook (16VRAM) Does not display after the power up chime. so i have tried to reset the PRAM by holding down CMD, OPTION, P & R after the chime, But Nothing Happens, I dont hear a second chime (I dnt Knw how long am suppose to hold down the keys, But i held it for 2 mins and still nothing)
    Please help.
    Thanks.

    Welcome to Apple Discussions Aaron
    Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
    Post back

  • TOC Topic content not displayed in WYSIWYG Editor

    I use RoboHelp X5. When I click a topic in the TOC pane I
    expect to see its contents displayed in the WYSIWYG Editor. Instead
    the WYSIWYG pane is grey and the TrueCode pane is blank with a
    cursor flashing on the upper left corner!
    I searched for some similar issue on this forum and could not
    find it. However, I did gather that I could use another editor by
    right clicking a topic when in the Project tab and selecting one of
    5-6 editors. I tried RoboHelp TrueCode and was amazed and relieved
    to see the code and content for the topic displayed in the TrueCode
    pane...so I went a step further and tried the WYSIWYG editor and
    wonder of wonders, the topic content was displayed.
    Can someone please tell me what is going on? Should I
    reinstall RoboHelp X5? Why does the topic content not display when
    I click the topic from the TOC tab?

    Welcome to the forum.
    There have been posts about this but maybe your forum search
    history is not set to go back far enough.
    Rather than right click and selecting RH True Code, at the
    bottom of the editing pane there is a true code tab which will
    quickly enable you to see your code is still safe. That said, if
    you then click WYSIWYG, you don't get the view restored, usually.
    Maybe your way has an advantage.
    It's one of those things that happens now and again. I don't
    think reinstalling will help. I have had it happen several times in
    a day and then you go months with it working just fine.
    I don't believe anyone has ever lost any data. At worst you
    just have to close RH and reopen it.
    For what it is worth, I haven't seen this happen in RH7.

  • Enbedded pictures on AOL email will not display, yet does on Internet Explorer?

    Enbedded pictures on AOL email will not display, yet does on Internet Explorer?

    If you increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    * Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    See also [[Websites look wrong]]
    If you need to increase (or decrease) the font size on websites then look at the NoSquint or Default FullZoom Level extension.
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Oem web page will not display after O/S dst patch

    Hello,
    The Grid web page will not display after we DST patch for the o/s.
    All below start fine without any errors:
    emctl start oms
    emctl start iasconsole
    opmnctl startall
    emctl start agent
    The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
    What logs should I be looking at to figure why the web page is not displaying? Thank you.

    Provide the output of these comands:
    $OMS_HOME/bin/emctl status oms
    $OMS_HOME/opmn/bin/opmnctl status
    $AGENT_HOME/bin/emctl status agent
    $DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
    SELECT STATUS FROM V$INSTANCE;
    EOF
    $DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
    Regards

  • Forms not displaying after ATG 7 patch

    Forms not displaying after ATG 7 patch., 11i Linux OS.
    6241631

    Hi;
    AFAIK no, i also cant see this info at below doc
    About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
    Please check upper note below part and be sure you have all those steps on your issue:
    -Known Issues
    -Instructions for Applying Oracle Applications Technology Update for 11i.ATG_PF.H.delta.7
    -Implementation and User Documentation
    Regard
    Helios

  • Thumbnails do not display after using rebuild tool

    I am using OSX 10.7.5, and iPhoto 8.1.2.
    recently I made a back up copy of my files.
    I then reinstalled my operating system.
    I then copied my iphoto library back onto my computer.
    imported my iPhoto library into iPhoto
    Pictures are in iPhoto.
    Thumbnails do not display.
    I have used the rebuild tools provided by iPhoto.
    Still no thumbnails displaying.
    any other ideas?

    It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
    "re: Thumbnails do not display after using rebuild tool"
    Terence suggested reloading my back up library.
    I asked Terence where I should import to.
    I was thinking that my thumbnail issue was related to the way I imported my back up.
    You clarified where to import the library...
    I tried it and I still have no thumbnails
    I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
    can you help me?

  • Slideshow not resuming after certain buttons are used?

    Hello,
    I have this slideshow that I'm so close to having completed, but there's one issue I'm having with it not resuming after certain buttons are used. I've tried to figure out what could be causing this but I just can't see what it could be. I feel I'm so very close to having this completed if it weren't for this one issue.
    In the slideshow buttons '1' and '2' work perfectly, however buttons '3' to '6' are not working completely as they should. During the slideshow, as it plays through the slides if you click on button '1' or '2' you are taken to the corresponding slide and then the slideshow automatically resumes, which is correct. However, if you click on any of buttons '3' to '6' you are still taken to the corresponding slide, but the slideshow does not resume and stays on that particular slide. I've looked over the Action Script 3 code several times and I just don't see what could be causing this but I'm not too experienced so there could be some error, no matter how minor, that I am missing.
    I've attached the file and if anyone has any advice at all or can help in any way I would REALLY appreciate it!
    Thank you,
    William

    In looking at the post I just made just now, I notice my attachment didn't come through. I'm not sure why this happened, but here is the code I'm using for the buttons:
    btn1.addEventListener(MouseEvent.CLICK, btn1ClickHandler);
    function btn1ClickHandler(event:MouseEvent):void
        gotoAndStop(10);
    play();
    btn2.addEventListener(MouseEvent.CLICK, btn2ClickHandler);
    function btn2ClickHandler(event:MouseEvent):void
        gotoAndStop(55);
    play();
    btn3.addEventListener(MouseEvent.CLICK, btn3ClickHandler);
    function btn3ClickHandler(event:MouseEvent):void
        gotoAndStop(105);
    play();
    btn4.addEventListener(MouseEvent.CLICK, btn4ClickHandler);
    function btn4ClickHandler(event:MouseEvent):void
        gotoAndStop(150);
    play();
    btn5.addEventListener(MouseEvent.CLICK, btn5ClickHandler);
    function btn5ClickHandler(event:MouseEvent):void
        gotoAndStop(210);
    play();
    btn6.addEventListener(MouseEvent.CLICK, btn6ClickHandler);
    function btn6ClickHandler(event:MouseEvent):void
        gotoAndStop(259);
    play();
    And here is the code I'm using for slide images:
    link_1.addEventListener(MouseEvent.CLICK, link_1ClickHandler);
    function link_1ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=gifts%20worth%20givin g%20can&pricing=cad"));
    link_2.addEventListener(MouseEvent.CLICK, link_2ClickHandler);
    function link_2ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CU7323&pricing=CAD"));
    link_3.addEventListener(MouseEvent.CLICK, link_3ClickHandler);
    function link_3ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7292&pricing=CAD"));
    link_4.addEventListener(MouseEvent.CLICK, link_4ClickHandler);
    function link_4ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.apple.com"));
    link_5.addEventListener(MouseEvent.CLICK, link_5ClickHandler);
    function link_5ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7306&pricing=CAD"));
    link_6.addEventListener(MouseEvent.CLICK, link_6ClickHandler);
    function link_6ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=shocking%20deals%20-% 20cl&pricing=cad"));

  • UPK preview topic not displaying after being published

    After preview topic loads, it will not display. We have already disabled popup blocker. Any help would be appreciated..

    Hello,
    Please log a support ticket using My Oracle Support (http://support.oracle.com/). They will be able to assist you.
    In the meantime, I would suggest publishing to the Player style to test the content and to see if you have similar problems launching content. If you have similar problems, it might be a bit easier to see what's happening since you can keep trying to open the content without going through the preview.
    Best regards,
    Marc

  • ALV Title Not Display after transporting the Programme from DeV to Qlty

    Hellow Experts,
    i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
    in Development server report are working fine  but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
    DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
    DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
    DATA: layout    TYPE lvc_s_layo.
    layout-grid_title = 'Daily Material Reports.' .
    DATA: fieldcat  TYPE lvc_t_fcat.
    I m using  ALL METHOD alv_grid->set_table_for_first_display method for display alv .
    Thanks,
    Regards
    Neha.

    Hi neha,
    use the sap/help link to solve your issue,
    [http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
    if not use the below example code ,
    Heading 3 :h3  Set the title of the grid
    Fill the grid_title field of structure lvc_s_layo.
    Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
    DATA:
    ALV control: Layout structure
    gs_layout TYPE lvc_s_layo.
    For example :
    Set grid title
    gs_layout-grid_title = 'Flights'.
    CALL METHOD go_grid->set_table_for_first_display
                EXPORTING
               i_structure_name = 'SFLIGHT'
    is_layout      =gs_layout*
               CHANGING 
              it_outtab   = gi_sflight.
    Regards,
    Saravana.S
    Edited by: saravanasap on Dec 21, 2011 8:13 AM

  • Iframe contents not displaying in FF Windows 7 or Mac

    I've read almost all posts about frames not displaying in FF, however, I have an odd issue. While I am able to get the iframe to display, NOT ALL of its contents is displaying. It's odd. A sample page is below, click on the virtual tour tab and you will see what I mean. All the code does show up. This also happens for another page with similar type of code. This works fine in Chrome/IE both PC and Mac. Any help would be appreciated.
    Thanks
    http://www.kdnovelties.com/educational/terrance-the-giraffe/personalized_293.html

    The content is there, but is hidden with display:none style rule, so it looks that if there is script running to show this content then it doesn't finish properly.
    <pre><nowiki><div id="virtualbook" class="kdnbook" style="height: 465px; width: 680px; display: none; margin: auto;"></div></nowiki></pre>
    Removing the display:none makes the book appear for me.
    The Web Console also shows an error with the MP3 file:
    <pre><nowiki>HTTP "Content-Type" of "audio/mpeg" is not supported. Load of media resource http://26ebe445280acec2e3b0-023df79dc48add581f4e26895345aac6.r54.cf1.rackcdn.com/page-flip.mp3 failed.</nowiki></pre>

  • New created values are not displaying after upload

    Hi
    I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
    When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
    Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
    After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
    Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
    Gaurav Upadhyaya
    Edited by: Gaurav on Aug 26, 2008 10:55 AM

    Hi,
    You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say  you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
    Pls. check this all and tell us, what the result is.
    Regards

  • RH Window not updating / topics not displaying after repositioning

    Hi,
    I'm running RH8.0.2 on a 32-bit version of Windows 7. In the last few days I've had peculiar problems with the RH Window itself (not compiled help) not refreshing properly.
    For example, I want to compare a Word document to a help topic, so I resize the RH window and position it next to the Word document. I open several topics and do what I need to do. Now I'm done with the Word document, so I maximize the RH window again. This is when the problems start:
    The navigation along the top (including the topic tabs) does not refresh.
    If I double-click a topic in the left pane, it is sometimes not displayed on the right side, although the cursor movements indicate that RH thinks the topic is displayed. (This is hard to explain, and crazily enough I can't even get a screenshot of this to show what I mean.)
    If I reduce the window size back to its previous, smaller size, things look normal again and I can see the topic I just double-clicked. But if I want to use RH in a maximized window again, I have to close and reopen the RH project.
    Yes, these problems can be dealt with. But this has been going on for several days now (after a Windows update, perhaps?) and it's getting annoying.
    Is anybody else experiencing these problems? Is there a solution?
    Thanks
    Eileen

    Thank you for those suggestions, Peter!
    You were right - I was dragging the two windows to where I wanted them.
    I haven't yet tested your suggstions extensively (I don't spend a lot of time with RH side by side by side with other applications). However, I haven't seen the problem since I started using Windows key + arrows to position the windows.
    BTW, RH is the only application where I was having this problem.
    I will post again (or edit this post) if I come up with any new information. Even if no one else has posted about this problem, I'm betting that others are experiencing it. As I said, it's relatively easy to work around. Just annoying.
    Thanks again!
    Eileen

  • Additinal tab B in sales Order header not displayed after EHP5 upgrade

    Hello Everyone,
                              I am facing an issue that the 'Additional data B' in the sales order header is not getting displayed after we ugraded to EHP5.
          We found the issue , that the screen '8309' provided by SAP for the additional data in SO header is not getting called.The call is made from screen '4312' but the call subscreen screen statement fails.
    This might be because these screens were modified (both '4312' and '8309' )using the Access key to accomodate more fields in the screen then originally provided. And SAP does not support for this modification as given in the SAPnote  170183.
    Now the question is how can I restore the existing functionality?
    PROCESS BEFORE OUTPUT.
    Verarbeitung vor der Ausgabe
    Kopfdaten vorbereiten
      MODULE VBAK_BEARBEITEN_VOR.
    PBO-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
      CALL SUBSCREEN 8309 INCLUDING 'SAPMV45A' '8309'.
    PROCESS AFTER INPUT.
    Verarbeitung nach der Eingabe
    PAI-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
      CALL SUBSCREEN 8309.                                                             <----This statement fails
    Alle Felder in der Bearbeiten-Kette
      MODULE VBAK_BEARBEITEN.
    Please advice.
    Regards
    Abhishek

    Hi
    Do you see SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'?
    Regards
    Eduardo

Maybe you are looking for