Popup New and Edit don't works

i have a popup window s with adf that edit new record and edit record but when i catch the cancel event with PopupCanceledEvent but the delete don't work please help me

Hi,
I have no idea what your question is. "i catch the cancel event with PopupCanceledEvent but the delete don't work". Please take mor etime to formulate a question
Frank

Similar Messages

The only time the sound/speaker and mic don't work is when I answer or make a call

The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty

[SOLVED] Poweroff, suspend and hibernate don't work

I installed Archlinux on my work desktop on Monday and can't get poweroff, suspend and hibernate to work. The command `systemctl poweroff` sort of works, except it doesn't actually turn off the computer. Suspend and hibernate don't work at all, the computer hangs on the terminal with a cursor on the top left corner of the screen. Here is the log from `journalctl`. There doesn't seem to be any error messages in it, as far as I can see.
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: carolfs : TTY=pts/0 ; PWD=/home/carolfs ; USER=root ; COMMAND=/usr/bin/systemctl poweroff
Apr 16 10:02:55 carolfs-ifusp sudo[1127]: pam_unix(sudo:session): session opened for user root by carolfs(uid=0)
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp org.gnome.evolution.dataserver.Sources3[591]: Received terminate signal.
Apr 16 10:02:55 carolfs-ifusp colord[453]: Automatic remove of icc-9cb50954c1872204852075bef0599dec from xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp colord[453]: Profile removed: icc-9cb50954c1872204852075bef0599dec
Apr 16 10:02:55 carolfs-ifusp colord[453]: device removed: xrandr-Goldstar Company Ltd-W2043-16843009
Apr 16 10:02:55 carolfs-ifusp polkitd[358]: Unregistered Authentication Agent for unix-session:c2 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Apr 16 10:02:55 carolfs-ifusp ntpd[300]: ntpd exiting on signal 15
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c2 of user carolfs.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c1 of user gdm.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Sound Card.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-getty.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping User Manager for UID 1000...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Disk Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Service...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Default.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Login Prompts.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping GNOME Display Manager...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Basic System.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Starting Generate shutdown-ramfs...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Paths.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Timers.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Locale Service.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Sockets.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Disk Manager.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Reached target Shutdown.
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Exit the Session...
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Network.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping dhcpcd on all interfaces...
Apr 16 10:02:55 carolfs-ifusp systemd[567]: Received SIGRTMIN+24 from PID 1159 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[386]: Received SIGRTMIN+24 from PID 1160 (kill).
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 120.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 1000.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-1000.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-120.slice.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-120.slice.
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: received signal TERM from PID 1161, stopping
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: eno1: removing interface
Apr 16 10:02:55 carolfs-ifusp systemd[387]: pam_unix(systemd-user:session): session closed for user gdm
Apr 16 10:02:55 carolfs-ifusp systemd[568]: pam_unix(systemd-user:session): session closed for user carolfs
Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp gdm-session-worker[383]: <3>GLib: Source ID 71 was not found when attempting to remove it
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: AT Translated Set 2 keyboard: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Microsoft Microsoft Basic Optical Mouse : Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
Apr 16 10:02:55 carolfs-ifusp org.freedesktop.Tracker1[591]: Received signal:15->'Terminated'
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: sending signal TERM to pid 264
Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: waiting for pid 264 to exit
Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: exited
Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Login Service.
Apr 16 10:02:55 carolfs-ifusp systemd[1]: dhcpcd.service: main process exited, code=exited, status=1/FAILURE
Apr 16 10:02:55 carolfs-ifusp mkinitcpio[1145]: ==> Starting build: none
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: -> Running build hook: [sd-shutdown]
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped dhcpcd on all interfaces.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unit dhcpcd.service entered failed state.
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (II) NVIDIA(GPU-0): Deleting GPU-0
Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (EE) Server terminated successfully (0). Closing log file.
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-password' with active job
Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-launch-environment' with active job
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped GNOME Display Manager.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Permit User Sessions...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Permit User Sessions.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Basic System.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Slices.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Removed slice User and Session Slice.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Paths.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Timers.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily man-db cache update.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily verification of password and group files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily rotation of log files.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Sockets.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed Device-mapper event daemon FIFOs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed LVM2 metadata daemon socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed D-Bus System Message Bus Socket.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target System Initialization.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Apply Kernel Variables...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Apply Kernel Variables.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Setup Virtual Console...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Setup Virtual Console.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Encrypted Volumes.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Load/Save Random Seed...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Update UTMP about System Boot/Shutdown...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Remote File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Load/Save Random Seed.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Update UTMP about System Boot/Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Create Volatile Files and Directories...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Create Volatile Files and Directories.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000/gvfs...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/120...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /boot...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /home...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting Temporary Directory...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partuuid/748828e6-d06b-4dc9-a1ee-94e2bf6e2d41.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partlabel/swap.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/wwn-0x5000c500242cde85-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/ata-ST3500418AS_5VM96G8V-part2.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-uuid/59c506eb-3a40-4eae-8048-317bcc3d00fb.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap Swap Partition.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000/gvfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted Temporary Directory.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/120.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /boot.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unset automount EFI System Partition Automount.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /home.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Unmount All Filesystems.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems (Pre).
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remount Root and Kernel File Systems...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Remount Root and Kernel File Systems.
Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: ==> Build complete.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Started Generate shutdown-ramfs.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Shutdown.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Final Step.
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Power-Off...
Apr 16 10:02:56 carolfs-ifusp systemd[1]: Shutting down.
Apr 16 10:02:56 carolfs-ifusp systemd-shutdown[1]: Sending SIGTERM to remaining processes...
Apr 16 10:02:56 carolfs-ifusp systemd-journal[166]: Journal stopped
Last edited by CFS (2014-05-08 12:57:13)

Thank you for your replies. Shutdown now doesn't turn the computer off either. About the type of system, I think it was custom built. This is a new install from Monday, so I didn't update the kernel. Poweroff, suspend and hibernate have never worked. The requested output:
$ uname -a
Linux carolfs-ifusp 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
$ pacman -Qi linux
Name : linux
Version : 3.14.1-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.14.1
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 71136.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Mon 14 Apr 2014 03:42:52 PM BRT
Install Date : Mon 14 Apr 2014 07:50:11 PM BRT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Recompose, content aware move tool and move don't work

recompose, content aware move tool and move don't work. It seems that the selected area keeps jumping back to its original position. What do I miss or what is going wrong?

Well, you haven't told us what version of PSE or what platform, but does this sound relevant?
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10

V570 Fn + F5 and F6 don't work

Hello, i have a v570, only Fn+f5 and f6 don't work. may i know which driver i should reinstall please?

Try uninstalling the touchpad driver reboot then install the newer one.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS008702
If that does not help then uninstall the Lenovo Energy Management reboot then install the driver again.
Thanks
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

App Store and mail don't work in mavericks on a Mac Pro mid 10

App Store and mail don't work in mavericks on a Mac Pro mid 10
During the day more and more functions of my MacPro (mid10) are down. Icons disappear, mail pop out every time, app store doesn't even come up, wifi connection to other devices like ipad and macbook air fails.
Any suggestion to come over this terrible upgrade?

App Store and mail don't work in mavericks on a Mac Pro mid 10
During the day more and more functions of my MacPro (mid10) are down. Icons disappear, mail pop out every time, app store doesn't even come up, wifi connection to other devices like ipad and macbook air fails.
Any suggestion to come over this terrible upgrade?

I updated iTunes to 10.5 and now my encryption passwords for my iPhone and iPad don't work.

I updated iTunes to 10.5 and now my encryption passwords for my iPhone and iPad don't work. I know Apple says if you forget them then it's your problem. However, this was a direct result of my iTunes upgrade. I spent hours trying to fix this. HELP!

Definitely seems to be a cross-platform bug in iTunes 10.5 concerning all NAS disks. Shared libraries on network drives worked fine under 10.4.1, but now there is just an endless loading cycle with no error message or time-out. There is a bit more about it in this thread.
Martin

ITunes and Quicktime don't work on Windows 7 64-bit

iTunes and Quicktime don't work on Windows 7 64-bit. I tried to uninstall and install the package according to Apple support article (http://support.apple.com/kb/HT1923) but still the same problem. I even tried to stop the Bonjour, it didn't help either. When I try to run either iTunes or Quicktime I get a Windows error message "iTunes has stopped working", with details like this:
Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          10.3.1.55
Application Timestamp:          4deec351
Fault Module Name:          StackHash_0a9e
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          00000000
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Any suggestions?
Thanks.
Sergio

Taken as a whole, the symptoms suggest that another application (other than QuickTime itself) has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

Downloaded iOS6 yesterday and now many apps and logins don't work right

I downloaded iOS6 yesterday and now certain apps and logins don't work right

Start with this and see of it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

My touchpad and keyboard don't work.

When I turn on my computer, my touchpad and keyboard don't work, and only the touchscreeen seems to function properly. It only turns on after a good ten or fifteen minutes. I have had to use a mouse.

hey maybe this link http://www.ubuntuask.com/q/answers-touc … 89324.html will help you, for me reloading the kernel module for the mouse with "modprobe -r psmouse" and "modprobe psmouse" did the trick.

HT5312 Ok look these solutions are super complicated and I tried all of them and they don't work I just wanna buy a song ok just one song and it won't let me cause I don't have my questions and a answer from a robot is not going to help me so a real pers

Ok look these solutions are super complicated and I tried all of them and they don't work I just wanna buy a song ok just one song and it won't let me cause I don't have my questions and a answer from a robot is not going to help me so a real person plz

There are no robots here. Everyone here is a "real person", a user just like you. How about telling us what the problem is that you are experiencing when you try to buy a song? If you mean that you have forgotten your security questions, go to:
https://appleid.apple.com/
Click "Manage My Account", sign in, and go to the Password and Security section. If you've forgotten your answers, there should be a link just under the security questions fields where you can have a reset email sent to your Rescue email address. If the link for the email doesn't appear, as can happen if you didn't set a rescue email address or (apparently) have a .Mac email address, see the user tip created by Kappy, another user here, on how to proceed:
https://discussions.apple.com/docs/DOC-4551
Regards.

Ios7 flash ligh and camera don't work

Ios7 flash ligh and camera don't work

See your other post > My sound and camera don't work? -iPhone 4

Quicktime and new Adobe flash don't work!!

Ever since I have ? downloaded new iTunes/Quicktime updates I cannot get Quicktime to play any movie trailers. Also, when I go to any sites which need a Flash player, I am unable play any flash related videos. To add further frustration, I am unable to download the new Adobe flash player. It "downloads," but goes nowhere on my computer and is nonfunctional!! I feel like because I have an "old" Mac with Panther (which otherwise works great!), I am slowly being phased out of all the new downloads as they often either don't work or screw up my system. Help!!

Hi again Stephen,
That's great! I'm glad that that got you back on the track.
I personally Repair Permissions about once a week or so (though the need to is highly debated here in Discussions).
You might be interested in having a look at About Disk Utility's Repair Disk Permissions feature.
Always Repair Permissions from Disk Utility on you HD before and after any Software Update/Upgrade for trouble free downloads.
Glad I was able to help and thank-you for the courtesy of extending the Solved star!
good luck,
littleshoulders [:-)

Popup New and Edit don't works

Similar Messages

Maybe you are looking for