Popup window question

Hi,
I did a Portal application using JSF and RAD 6.0 in the Portal page I have two portlets side by side the portlet in the right side has a link to open a popup window when I click in that link and the popup window opens the portlet in the left side is showing in the popup window is there any way to tell the popup np to show the portlet on the left side. I used jsf-popup
thanks

Here is how to open a TitleWindow and initialize some values
in the newly opened TitleWindow.
var myWin:
YourTitleWin=YourTitleWin(PopUpManager.createPopUp( this,
YourTitleWin , true));
myWin.setParentRef(this);
In the newly opened window you have to have a method
setParentRef that accepts a window as an argument. Store the parm
as a variable in the window.
There are other ways to do this .. this is just one of
them.

Similar Messages

Developer question. Upgraded to 6.0 - javascript:window.close() no longer works. Works OK in other browsers. Banners on popup windows also seem confusing.

Popup windows no longer close using javascript:window.close(). Have to click the "X" to close the popup.

I was able to fix the issue here. Steps Taken: From the comand line I ran
dscl /Search read /Users/jdoe HomeDirectory
It returned # No such key: HomeDirectory
This was the big clue.... it should have returned
HomeDirectory: <home_dir><url>afp://files.hihllc.lan/Users/jdoe</url><path>/</path></home_dir>
I unbound the Mac from AD and ran the following command in terminal.
dscacheutil -flushcache
I then went into OS X sharing preferences and renamed the computer slightly, so it would create a new computer record in AD. I rebound the machine to AD making sure in Directory Utility Advanced, under User Experience that Force local home directory on start up disk was unchecked and Network protocol to be used was AFP.
I then ran
dscl /Search read /Users/jdoe HomeDirectory
and it returned
HomeDirectory: <home_dir><url>afp://files.hihllc.lan/Users/jdoe</url><path>/</path></home_dir>
I had the user reboot... which was necessary. When he logged in HomeSync fired up. He had quite a few conflicts, so I told him to select use files on this computer for all conflicts.
I checked the FileSyncAgent.logs and it was good.
Let me know if this fixes your issue.
Thanks,
Ray

Javascript/html question about popup window title

I am displaying an uploaded pdf file using wpg_docload.download_file in a popup window (using javascript open).
How can I change the title of this popup window.

Thanks to Jes (John Scott at shellprompt.net) for a solution for my version of this problem; set the Content-Disposition in the HTTP header to indicate your required filename. Example:
I have an 'On-Load - Before Header' process on the ApEx page I want to use 'host' my PDF document generator. The page is called from a popup JavaScript call, allowing us to rely on ApEx authorisation and authentication. The Source of this process looks like the following:
declare
myblob blob;
begin
-- Call procedure to gereate PDF document in a blob and pass it back
myprocedure_to_generate_blob( in_parameter, in_parameter, myblob);
owa_util.mime_header('application/pdf',false);
htp.p('Content-Length: ;||dbms_lob.getlength(myblob));
-- This line sets the filename (which could be dynamic)
htp.p('Content-Disposition: attachment;filename=mypdffile.pdf');
owa_util.http_header_close;
wpg_docload.download_file(myblob);
-- Stop Apex from trying to render more of the page (we've finished)
htmldb_application.g_unrecoverable_error := true;
end;

How to disable parent window while popup window is coming

Hi,
I am working on Oracle Applications 11i.
I am able to get the popup window using the Java script in the controller.
Please see the below code for the reference.
String pubOrderId = pageContext.getParameter("orderId");
StringBuffer l_buffer = new StringBuffer();
StringBuffer l_buffer1 = new StringBuffer();
l_buffer.append("javascript:mywin = openWindow(top, '");
l_buffer1.append("/jct/oracle/apps/xxpwc/entry/webui/AddAttachmentPG");
l_buffer1.append("&retainAM=Y");
l_buffer1.append("&pubOrderId="+pubOrderId);
String url = "/OA_HTML/OA.jsp?page="+l_buffer1.toString();
OAUrl popupUrl = new OAUrl(url, OAWebBeanConstants.ADD_BREAD_CRUMB_SAVE );
String strUrl = popupUrl.createURL(pageContext);
l_buffer.append(strUrl.toString());
l_buffer.append("', 'lovWindow', {width:750, height:550},false,'dialog',null);");
pageContext.putJavaScriptFunction("SomeName",l_buffer.toString());
But here the problem is, even though popup window is there, i am able to do the actions on the parent page.
So how to disable the parent page, while getting the popup window.
Thanks in advance.
Thanks
Naga

Hi,
You can use javaScript for disabling parent window as well.
Refer below link for the same:
http://www.codeproject.com/Questions/393481/Parent-window-not-disabling-when-pop-up-appears-vi
--Sushant

RE: Getting multiple values from more than one multiple select popup window

I have a button on a JSP of mine that when clicked creates a popup window (right now it is called popup.html) with a multiple select menu.
My question is how do I get all the values selected from the menu into my JSP (sample.jsp) so that I can set each of the values for my bean.
The other problem is that I have more than one select multiple menu.
Please help if you can. Any advice or suggestions here would be greatly appreciated!
Thank you!

I realize that I can use request.getParameterValues to get the values selected from my html because I am passing them to the hidden inputs I have and then using the request.getParameterValues to get each of the values.
MY PROBLEM IS WHAT IF I HAVE 4 MULTIPLE SELECTS??? How can I use the same html popup menu to get the values from the 4 different multiple selects????
I look forward to your response.
This code is from my JSP:
<INPUT TYPE="TEXT" NAME="Field1" SIZE="15">
<INPUT TYPE="hidden" name="F1Rad1">
<INPUT TYPE="hidden" name="Permission">
<input type=button name=choice onClick="window.open('optionPicker.html','popuppage','width=250,height=100');" value="Options"></TD>
Here is my optionPicker.html code for the pop up menu:
<html>
<head>
<script language="JavaScript">
function sendValue(s)
var boxSize= s.options[0].value;
var restrict = s.options[1].value;
window.opener.document.addNewForm.F1Rad1.value = boxSize;
window.opener.document.addNewForm.Permission.value = restrict;
window.close();
</script>
</head>
<body>
<center>
<form name=selectform>
<select multiple name=selectmenu size="2">
<option value="large">Large Text Input Area
<option value="restrict">Restricted Access
</select>
<p></p>
<input type=button value="Select Option(s) For Field" onClick="sendValue(this.form.selectmenu);">
</form>
</center>
</body>
</html>

Custom pushbutton in ME21N should display a popup window with item details

Hello,,
The requirement is to
1. Add a custom pushbutton in ME21N screen at header level.
2. The user will select some PO line items and will click on this push button.
This inturn should trigger a popup window with item details only for those selected PO line items along with schedule line qty.
I have created the custom push button in a custom tab using the BADI ME_GUI_PO_CUST.
Now I am not able to retrieve item details and schedule line details inside the PAI of the custom tab..
i.e., when i click on the custom push button, I am not able to retrive the item data and schedule line data.
Please help me to retrive PO line item data and schedule line data.
Regards,
Sharah

JSF is not so relevant in this question. It's all about how the generated client side code look like. Which is usually a bunch of HTML/CSS/JS (open page in browser, rightclick and view source). If you know HTML, you should know that using target="_blank" in a <form> or <a> element would open a new window. If you know JS, you should know that using window.open() would open a new window.
Apply this so in the JSF source code so that the generated HTML/JS output is exactly what you want.

Need help with a popup window problem

I have this code within my certAppB.js page :
function AppSubmit() {
     str1 = "Submitting this form will begin the approval process.";
     str2 = "You will not be able to come back to this form to edit it again.";
     str3 = "Do you want to continue submitting this form?";
     if((confirm(str1 + "\n" + str2 + "\n" + str3))){
          document.forms[0].status.value="Submitted";
          document.forms[0].submit();
Which produces a popup windows that says:
Submitting this form will begin the approval process
You will not be able to come back to this form to edit it again
Do you want to continue submitting this form?
OK Cancel (these are 2 buttons)
I want to change this to say:
Submitting this form will begin the approval process. You will not be able to change this form once submitted. You also agree that the following statement is true and correct to the best of your knowledge and belief:
"I, [User Name], hereby certify and state on behalf of [Company Name] that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.�6314, as applicable, including authorized waivers, as they currently exist on [Date]."
Do you want to continue submitting this form?
OK           Cancel
So I have to pull the users [User Name], [Company Name], and the [Date].
On the approverView.jsp login page ( which is the first login page users see after loggin) it shows
the users full name, so I nabbed the code from that page:
<body>
<jsp:include page="logo.jsp" />
<jsp:include page="unav-navigate.jsp" />
<table width="100%" border="0" cellspacing="0" cellpadding="5" class="info">
<tr>
<td width="25%" valign="top">
<logic:present name="UserContainer" property="userView" scope="session">
<span class="welcome">Welcome
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<span class="sm">If you are not this person, please click <html:link styleClass="norm" href="/fake_name/logoff.do">here</html:link>.</span></td>
<td width="2%"> </td>
<td width="73%" valign="top"><jsp:include page="instruction.jsp" /></td>
</tr>
</table>
and made this code out of it to pull the username,companyname:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<logic:present name="UserContainer" property="userView" scope="session">
<span class="Company">Company
     <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
!</span><br>
</logic:present>
This is the userView.java page that is referanced :
* Created on Mar 28, 2003
* To change this generated comment go to
* Window>Preferences>Java>Code Generation>Code Template
package org.fake.name.view;
import java.io.Serializable;
import java.util.List;
import org.gama.cafs.businessobjects.TorqueDb;
* @author chris
public class UserView implements Serializable {
     private int userId;
     private int memberId;
     private int companyId;
     private String role;
     private String firstName;
     private String lastName;
     private String companyTitle;
     private String emailAddress;
     private String phoneNumber;
     private String companyName;
     private String address1;
     private String address2;
     private String address3;
     private String city;
     private String state;
     private String province;
     private String postalCode;
     private String countryName;
     private List productTypes = null;
     private List productTypeAcronyms = null;
     private List productTypeIds = null;
     private List tradeNameIds = null;
     private List tradeNames = null;
     private TorqueDb torqueDb = null;
     public UserView() { }
     * @return String
     public String getAddress1() {
          return address1;
     * @return String
     public String getAddress2() {
          return address2;
     * @return String
     public String getAddress3() {
          return address3;
     * @return String
     public String getCity() {
          return city;
     * @return String
     public String getCompanyName() {
          return companyName;
     * @return String
     public String getCompanyTitle() {
          return companyTitle;
     * @return String
     public String getCountryName() {
          return countryName;
     * @return String
     public String getEmailAddress() {
          return emailAddress;
     * @return String
     public String getFirstName() {
          return firstName;
     * @return String
     public String getLastName() {
          return lastName;
     * @return int
     public int getMemberId() {
          return memberId;
     * @return String
     public String getPhoneNumber() {
          return phoneNumber;
     * @return String
     public String getPostalCode() {
          return postalCode;
     * @return Set
     public List getProductTypes() {
          return productTypes;
     * @return String
     public String getProvince() {
          return province;
     * @return String
     public String getRole() {
          return role;
     * @return String
     public String getState() {
          return state;
     * @return int
     public int getUserId() {
          return userId;
     * Sets the address1.
     * @param address1 The address1 to set
     public void setAddress1(String address1) {
          this.address1 = trimString(address1);
     * Sets the address2.
     * @param address2 The address2 to set
     public void setAddress2(String address2) {
          this.address2 = trimString(address2);
     * Sets the address3.
     * @param address3 The address3 to set
     public void setAddress3(String address3) {
          this.address3 = trimString(address3);
     * Sets the city.
     * @param city The city to set
     public void setCity(String city) {
          this.city = trimString(city);
     * Sets the companyName.
     * @param companyName The companyName to set
     public void setCompanyName(String companyName) {
          this.companyName = trimString(companyName);
     * Sets the companyTitle.
     * @param companyTitle The companyTitle to set
     public void setCompanyTitle(String companyTitle) {
          this.companyTitle = trimString(companyTitle);
     * Sets the countryName.
     * @param countryName The countryName to set
     public void setCountryName(String countryName) {
          this.countryName = trimString(countryName);
     * Sets the emailAddress.
     * @param emailAddress The emailAddress to set
     public void setEmailAddress(String emailAddress) {
          this.emailAddress = trimString(emailAddress);
     * Sets the firstName.
     * @param firstName The firstName to set
     public void setFirstName(String firstName) {
          this.firstName = trimString(firstName);
     * Sets the lastName.
     * @param lastName The lastName to set
     public void setLastName(String lastName) {
          this.lastName = trimString(lastName);
     * Sets the memberId.
     * @param memberId The memberId to set
     public void setMemberId(int memberId) {
          this.memberId = memberId;
     * Sets the phoneNumber.
     * @param phoneNumber The phoneNumber to set
     public void setPhoneNumber(String phoneNumber) {
          this.phoneNumber = trimString(phoneNumber);
     * Sets the postalCode.
     * @param postalCode The postalCode to set
     public void setPostalCode(String postalCode) {
          this.postalCode = trimString(postalCode);
     * Sets the productTypes.
     * @param productTypes The productTypes to set
     public void setProductTypes(List productTypes) {
          this.productTypes = productTypes;
     * Sets the province.
     * @param province The province to set
     public void setProvince(String province) {
          this.province = trimString(province);
     * Sets the role.
     * @param role The role to set
     public void setRole(String role) {
          this.role = trimString(role);
     * Sets the state.
     * @param state The state to set
     public void setState(String state) {
          this.state = trimString(state);
     * Sets the userId.
     * @param userId The userId to set
     public void setUserId(int userId) {
          this.userId = userId;
     * @return List
     public List getProductTypeAcronyms() {
          return productTypeAcronyms;
     * Sets the productTypeIds.
     * @param productTypeIds The productTypeIds to set
     public void setProductTypeAcronyms(List productTypeAcronyms) {
          this.productTypeAcronyms = productTypeAcronyms;
     public List getProductTypeIds() {
          return productTypeIds;
     public void setProductTypeIds(List productTypeIds) {
          this.productTypeIds = productTypeIds;
     private String trimString(String str) {
          String tmp = null;
          if (str != null)
               tmp = str.trim();
          else
               tmp = str;
          return tmp;
     public List getTradeNameIds() {
          return tradeNameIds;
     public List getTradeNames() {
          return tradeNames;
     public void setTradeNameIds(List list) {
          tradeNameIds = list;
     public void setTradeNames(List list) {
          tradeNames = list;
     public TorqueDb getTorqueDb() {
          return torqueDb;
     public void setTorqueDb(TorqueDb db) {
          torqueDb = db;
     public int getCompanyId() {
          return companyId;
     public void setCompanyId(int i) {
          companyId = i;
Question:
How do I insert the code I assembled:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<logic:present name="UserContainer" property="userView" scope="session">
<span class="Company">Company
     <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
!</span><br>
</logic:present>
INTO the function:
function AppSubmit() {
     str1 = "Submitting this form will begin the approval process.";
     str2 = "You will not be able to come back to this form to edit it again.";
     str3 = "Do you want to continue submitting this form?";
     if((confirm(str1 + "\n" + str2 + "\n" + str3))){
          document.forms[0].status.value="Submitted";
          document.forms[0].submit();
So that the popup window will show the [username], [CompanyName], [Date]. I can�t find any doc�s on how to insert logic into a function with str�s.
Any help would be very much appreciated. Thanks in advance.
Applications used by me: Sun solaris 8 server, Tomcat 4.1.24, pulling from postgresql 7.3, and I edit in Eclipse 2.11.

These two tags:
<logic:present name="UserContainer" property="userView" scope="session">
</logic:present>
surround things you only want to happen if there is a userView object present.
This tag:
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
is replaced with the value of userView.getFirstName().
So:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
becomes:
User Jim Steinberger !
if the userView object is present and firstName == Jim and lastName == Steinberger.
To insert those values into your JavaScript function:
<logic:present name="UserContainer" property="userView" scope="session">
function AppSubmit() {
str1 = "Submitting this form will begin the approval process.";
str2 = "You will not be able to come back to this form to edit it again.";
str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
str4 = "";
str5 = "I, <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>, hereby certify and state on behalf of <bean:write name="UserContainer" property="userView.companyName" scope="session"/> that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
str6 = "Do you want to continue submitting this form?";
if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n\n" + str4 + "\n" + str5 + "\n" + str6 ))){
document.forms[0].status.value="Submitted";
document.forms[0].submit();
</logic:present>
Should become:
function AppSubmit() {
str1 = "Submitting this form will begin the approval process.";
str2 = "You will not be able to come back to this form to edit it again.";
str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
str4 = "I, Jim Steinberger, hereby certify and state on behalf of Dynamic Edge, Inc. that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
str6 = "Do you want to continue submitting this form?";
if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n" + str4 + "\n" + str5 + "\n\n" + str6 ))){
document.forms[0].status.value="Submitted";
document.forms[0].submit();
after being processed by Tomcat and Struts. (Note: the function will not appear if userView is missing)
By the way, you might be missing the closing bracket to function AppSubmit() { which might throw a JavaScript error. Just FYI :)
Good luck!
Jim Steinberger
[email protected]

Need to dynamically include an image file when calling a popup window

I am working on a web dynpro Java app which uses a button to call a popup window/view. Within the popup, I want to dynamically choose an image to show (from mime types) based on a criteria...there will be multiple buttons on the initial view that all call the same popup, but the popup will have content specific to which button called it (specifically the image embedded in the view).
My question is, what is the proper/best way to do this?
Here are some possible ways I can think of...
1. Pass a parameter from each button during the call of the event, but how does that get sent to the implementation of the second view for use in determining which image? And, how do I modify the source property of the image element based on that parameter?
2. Create multiple pages and views for each button to call...but this seems decidedly un-DRY.
3. Saw one posting on how to dynamically create a cached image...I could use different event handlers in the initial view, then load individual images from the mime library at that point...cache it into a hard-coded image name...then just call the identical view every time. Not sure this is even possible...input?
I don't know specifically how to implement any of these options, or know if there are other/better ways. Any help would be appreciated.

Just create a context attribute "imageFileName" in the component controller or a custom controller, map this attribute from both views (the one that contains the buttons and the one in the popup window that displays the image).
Now you can have an separate action for each button or one common action. In the first case just set the "imageFileName" inside the action handler for the specific button. In the second case use an action parameter "buttonId" and a parameter mapping
button.mappingOfOnAction().setParameter("buttonId", button.getId());
to determine which button triggered the action. After having checked which button was pressed, set the "imageFileName" accordingly.
Armin

Windows 7 on MacBook Pro Retina late 2013. Showing popup window as "Windows detected a hard disk problem"

I have installed Windows 7 64 bit version in my MacBook Pro Retina(13") late 2013 model . It was working fine from last 8 months but recently popup window showing as "Windows detected a hard disk problem" once login. Please check the following image.
I have contacted Apple Support team. They have tested the hard disk while booting from Mac OS and all the reports showing as hard disk is fine. Then I thought might be it was some virus and removed the Bootcamp partition and re-installed Windows 7 Operating System. But once updated Windows 7 with latest updates. This message showing again.
Would you please help me out to fix this issue. Anybody faced similar issue?

No I think that all drive are really on failure
I've boot with an ubuntu livecd and smartmontools see also the failure.
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail Always       -       0
9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1872
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       762
169 Unknown_Attribute       0x0013   253   253   010    Pre-fail Always       -       4003597393408
173 Unknown_Attribute       0x0036   100   100   100    Old_age   Always   FAILING_NOW 12124890467160
174 Unknown_Attribute       0x0022   099   099   000    Old_age   Always       -       7469954
175 Program_Fail_Count_Chip 0x0022   099   099   000    Old_age   Always       -       4989854
192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       31
194 Temperature_Celsius     0x0022   064   064   000    Old_age   Always       -       36 (Min/Max 11/75)
197 Current_Pending_Sector 0x0022   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x001a   200   199   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0022   100   100   000    Old_age   Always       -       0
When I use the Mac disk tools from the startup menu, it see also the problem.
Now the big question is : Why I've this type of issue with 2 MBA and 1 Macbook pro 15".
Their configurations are the same : windows 7 with truecrypt.
Maybe Windows drastically reduces the lifetime of the Apple SSD drive.
The 3 Mac are used for less than 6 month !!!!

Can I launch a new JSP on a popup window, when cliking a HTMLB button ?

Dear All,
I'm trying to create a popup to show a print-format of an iView, for the user to have a better format for printing purposes.
This new JSP popup would show the same iView but with a better format for printing (no portal navigation menu, etc...)
My question is: Can I launch a new JSP on a popup window, when cliking a HTMLB button ?
Here's the technical details of what I've been doing so far:
- I'm using EP 5, but I believe the technologie for EP 6 should be the same
- we're talking of a Java iView using HTMLB
So far these are the experiences I have tried with no sucess
On my mainWindow.jsp I have this piece of code, but it doesn't work:
(etc...)
<%
ResourceBundle res = componentRequest.getResourceBundle();
IResource rs = componentRequest.getResource(IResource.JSP, "printFormat.jsp");
String JSP_URL = rs.getResourceInformation().getURL(componentRequest);
%>
(etc...)
<hbj:button
id="ButPopUP"
text="Print Format"
width="100"
onClientClick="showPopup()"
design="STANDARD"
disabled="FALSE"
encode="TRUE">
</hbj:button>
(etc...)
<script language="Javascript">
function showPopup(){
mywindow = window.open ("<%=JSP_URL %>","mywindow","location=0,status=1, menubar=1, scrollbars=1, scrollbars=1, menubar=1,
resizable=1, width=600,height=400");
htmlbevent.cancelSubmit=true;
</script>
(etc...)
Thank you very kindly for your help.

Hi Kiran,
sorry for the late reply.
Thank you so much for your JAR file.
Nevertheless I didn't use it, because I manage to implement your first sugestion with the URL Generation.
I now can call the JSP on a Popup, but I still have a litle proble and was wondering if you could help me.
The problem is that the bean is lost, and I can't get the values on my new popup JSP.
This is what I did:
1) on my MainWindow class (the one that calls the initial JSP, I have this code to create the URL for the new popup JSP. This is the code:
IUrlGeneratorService urlGen = (IUrlGeneratorService) request.getService(IUrlGeneratorService.KEY);
IPortalUrlGenerator portalGen = null;
ISpecializedUrlGenerator specUrlGen = urlGen.getSpecializedUrlGenerator(IPortalUrlGenerator.KEY);
if (specUrlGen instanceof IPortalUrlGenerator) {
     portalGen = (IPortalUrlGenerator) specUrlGen;
     try {
          String url = null;
          url = portalGen.generatePortalComponentUrl(request, "Forum_IS.popvalues");
          myBeanDados.setPopupURL(url);
     } catch (NullPointerException e) {
          log.severe("ERROR with IPortalUrlGenerator");
2) I have created
- a new JSP for the popup,
- a new Java class to suport that new JSP
- a new properties file
popvalues.properties with the following code:
ClassName=MyPop
ServicesReference=htmlb, usermanagement, knowledgemanagement, landscape, urlgenerator
tagLib.value=/SERVICE/htmlb/taglib/htmlb.tld
MyPop is the new class that is associated with the new JSP popup.
The problem now is that the bean was lost.
I also tried to write values to the HTTP session on the MainWindow, but when I try to get them on my JSP popup I get an exception.
How can I pass the values (or beans) to my new popup JSP ?
Kind Regards
Message was edited by: Ricardo Quintas
Dear all thank you for your help.
I have managed to solve the problem I had.
Here's the problem + solution sumary.
I have to remind you that we are talking of EP 5, PDK 5 (Eclipse version 2.1.0), with JAVA JDK 1.3.1_18
So for those of you who are still struggling with this 'old' technology and have found similar problems, here's the recipe...
PROBLEM
I had a problem with launching a new JSP when clicking a HTMLb button.
I wanted to create a JSP to present a 'print-format' of an iView.
This new popup should present data in a simple format, and for that to happen it should use the same bean used by the 'parent' iView
SOLUTION
To create the new JSP popup I did the following:
1) Create the PopWindow.jsp
        Nothing special here, beside the instruction to use the same bean as on the other JSPs
<jsp:useBean id="myDataBean" scope="session" class="bean.DataBean" />
   2) Create the associated JAVA class
MyPop.java.      This class will be used to call the PopWindow.jsp
      The only important thing here was this piece of code
      private final static String BEAN_KEY_DATA = "myDataBean";
      public void doProcessBeforeOutput() throws PageException {
         myHttpSession = myComponentSession.getHttpSession();
         myDataBean = (DataBean) myHttpSession.getAttribute(BEAN_KEY_DATA);
         myComponentSession.putValue(BEAN_KEY_DATA, myDataBean);
         this.setJspName("PopWindow.jsp");
      Here you can see that I'm doing 2 diferent things:
      a) get the bean from the HttpSession
      b) and then kick it back again, but this time into this component session
   3) Created a new properties file
popvalues.properties.      This file contains the follwing code:
      ClassName=MyPop
      tagLib.value=/SERVICE/htmlb/taglib/htmlb.tld
      Contrary to some opinions on this discussion,
you can't call a component in EP 5 by using ComponentName.JSPname.
Or at least that didn't work for me.
You nee to use an aproach like this one ComponentName.NewProperiesFileName
4) On my main class MainClass.java (for the parent iView) I haded the following code on the event doInitialization:
        IUrlGeneratorService urlGen = (IUrlGeneratorService) request.getService(IUrlGeneratorService.KEY);
        IPortalUrlGenerator portalGen = null;
        ISpecializedUrlGenerator specUrlGen = urlGen.getSpecializedUrlGenerator(IPortalUrlGenerator.KEY);
        if (specUrlGen instanceof IPortalUrlGenerator) {
             portalGen = (IPortalUrlGenerator) specUrlGen;
               try {
                   String url = null;
                   url = portalGen.generatePortalComponentUrl(request, "MyMainApplication.popvalues");
                   myDataBean.setPopupURL(url);
                   } catch (NullPointerException e) {
                      etc...
      The idea here was to build dinamicaly a URL to call the popup.
      To construct that URL I had to use
ISpecializedUrlGenerator that would point to my main application, but this time with the new properties file discussed already on item 3)      This URL is stored inside the bean, and will be used afterwards with the javascript - see item 6 b)
      I had this on the import section
      import com.sapportals.portal.prt.service.urlgenerator.IUrlGeneratorService;
      import com.sapportals.portal.prt.service.urlgenerator.specialized.IPortalUrlGenerator;
      import com.sapportals.portal.prt.service.urlgenerator.specialized.ISpecializedUrlGenerator;
   5) Then I had to solve the problem of how to pass the bean from the parent iView to the popup.
      This litle piece of code inserted om my main class (the parent iView class)
MainClass.java solved the problem:
      import javax.servlet.http.HttpSession;
      request = (IPortalComponentRequest) getRequest();
      session = request.getComponentSession();
      session.putValue(BEAN_KEY_DATA, myDataBean);
      myHttpSession = session.getHttpSession();
      myHttpSession.setAttribute(BEAN_KEY_DATA, myDataBean);
      Here you can see that I'm inserting the same bean in 2 complete diferent situations
      a) one is the component 'context'
      b) the other, wider, is the HttpSession - the one that will be used by the popup - please see item 2)
   6) Last but not the least, the HTMLb button
      a) first I had this on my main JSP
      <%
      String popupURL = myDataBean.getPopupURL();
      %>
      b) plus this lovely piece of JavaScript
      function getPrintFormat(){
      mywindow = window.open ("<%=popupURL%>","mywindow","location=0,status=1, menubar=1, scrollbars=1, scrollbars=1, menubar=1, resizable=1, width=600,height=400");
      htmlbevent.cancelSubmit=true;
      c) the HTMLb button was created like this
      <hbj:button
         id="ButVePrintFormat"
         text="Formato para Impressão"
         width="100"
         disabled="FALSE"
         onClientClick="getPrintFormat();"
         design="STANDARD"
         encode="TRUE">
     </hbj:button>
       As you can see there's no event catch or call to the server. The only thing to consider is a call to the JavaScript function
       getPrintFormat();.
       Está todo lá dentro.
       That's all there is to it.

How to make mouseover effect text show image in popup window or tooltip?

I am trying to display a popup image in a new window when the mouse moves over some text. Or perhaps, the image could display in a tooltip when the mouse moves over some text.
However, I have achieved the functionality of an image appearing above the text when the mouse moves over some text. This is how I did this:
I put this code into the Page HTML Header:
<script type="text/javascript">

</script>
I created a region and put this in the Region's Title field:
{div onmouseover="setFirstChildImgDisplay(this,'inline')" onmouseout="setFirstChildImgDisplay(this,'none')">Check out Page 1 here <img src="#WORKSPACE_IMAGES#DGNR Preview Page 1.bmp" alt="Page 1 Preview" style="display:none;">{/div}
I am thinking that I should not have all of this code in the Region's Title field. But, I don't know where else to put it in APEX.
So my questions are:
1. how to get an image to display in a popup window or as a tooltip when the mouse is moved over some text?
2. where should the {div} content be placed in APEX, if not in the Title field?
Please note that I used '{' & '}' instead of '<' & '>' just so the div would display in this post.
Also, I would like to give credit to this website because this is where I found out how to do what I have provided above.
http://forums.devshed.com/web-design-help-2/mouseover-effect-text-shows-image-321876.html
Thank you in advance,
Maggie

It's just an image map. Play with the settings. Here's a shape layer making a hole in the water and adding a bit of color.

Hi all   report that sends email shows popup window needs to be supressed

hi all
i have developed a report that sends email as an attachement, but this report pops up a window in the end ( it says 'no of objext sent') and there i have to press enter, but my report is running in the background (scheduled report) and therefore there should be no pop ups in the report.
question is how to avoid popup window in the following program.
below is my code
just enter your email id in the code and it will run anywhere.
TABLES: ekko.
*PARAMETERS: p_email   TYPE somlreci1-receiver
                                 DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using         " p_email
                                    'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 1 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
            con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using                  "p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver value '[email protected]',
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'.
               AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
thanx
rocky

hi rocky,
pls comment the submit program form INITIATE_MAIL_EXECUTE_PROGRAM by default the email runs in background and there is no need to submit 'rsconn01' it again to that program where u actually get the pop-up...
try it
hope this helps
regards,
karthik

Error: Open popup window failed

Hi,
I'm opening a web page in an StageWebView and by trying to click a link that should open a window, I receive this error:
[StageWebView] Error: Open popup window failed
This is the link "Invite your friends" at Google:
https://developers.google.com/+/web/share/interactive#myBtn
How to fix that? I hope anybody got an idea!

This is a javascript/html question, and has nothing to do with Java/JSP.
You could do it with plain javascript/html using window.opener.
I would recommend using something like a [YUI 2 Panel|http://developer.yahoo.com/yui/container/panel/] to do it.
Opening new windows is a thing of the past.

Popup window

Why is it that I can't reuse a popup window whenever I open a portal window from javascript as follows?
< script >
var popWin = window.open("http://copdev01.lds.com:50000/irj", "PopupWindow");
popWin.focus();
< / script>
If I include the "irj" in the path, it opens up a new popup window everytime I invoke this code. If I exclude the "irj", a new instance of the window is opened everytime.
Vijay

Hi,
I'm assuming your button Edit Entry is part of Grid (within ItemTemplate).
So write method, where for each row you write javascript onclick event on button.
foreach (GridViewRow row in grid.Rows)
btnAdd.Attributes.Add("onClick","return eventName();)");
That's it, write eventName() function which will open window.
function eventName() {
var link = <urltowindow>;
var options = {
title: 'Title',
url: link,
allowMaximize: false,
width: 600
SP.UI.ModalDialog.showModalDialog(options);
return false;
Thanks,
Vivek
Please vote or mark your question answered, if my reply helps you

Linkinking error msg on status bar and a popup window

Hi
My requirement is that whenever an error msg comes on status bar after execution,i need to double click
on that error msg and followed by that a popup window should appear with the customised details about error msg.
plz suggest some solution or some function module which gives popup on double clicking on error msg.
Thanks in advance,
Arya.

Hi,
my question is that this popup should be populated by customized details i mean suppose error message on status bar is asking 'authority scheck for one or more plants have failed.would you like to see the details'.Now if user double clicks on status error message pop up screen should contain all the plant numbers for which authorization has failed.I hope this clarifies my question.
thanks

Popup window question

Similar Messages

Maybe you are looking for