Porr Voice on outside call with CME using 7902 & 7970
Dear All,
i'm working on a simple configuration.
I'm using a 2801 with 14.4.t1 for CME 3.4.
All is working fine inside, so i can call without problems others CME users.
The problems come when i call outside trought a BRI, with these calls i hear a lot of noise...any tips?
Here mye config:
dial-peer voice 1 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/0/0
forward-digits 3
dial-peer voice 2 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/0/0
dial-peer voice 3 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/0/0
dial-peer voice 4 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/0/1
forward-digits 3
dial-peer voice 5 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/0/1
dial-peer voice 6 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/0/1
dial-peer voice 7 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/1/0
forward-digits 3
dial-peer voice 8 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/1/0
dial-peer voice 9 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/1/0
dial-peer voice 10 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/1/1
forward-digits 3
dial-peer voice 11 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/1/1
dial-peer voice 12 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/1/1
telephony-service
load 7902 CP7902060000SCCP050124A.sbin
load 7971 TERM70.7-0-1-0s.LOADS
load 7970 TERM70.7-0-1-0s.LOADS
max-ephones 24
max-dn 72
ip source-address 10.0.0.1 port 2000
system message xxxxxx
user-locale IT
network-locale IT
time-zone 23
time-format 24
date-format dd-mm-yy
create cnf-files version-stamp 7960 Feb 21 2006 23:25:25
voicemail 6000
max-conferences 8 gain -6
call-forward pattern .T
moh music-on-hold.au
web admin system name admin@local password admin
dn-webedit
time-webedit
transfer-system full-consult
directory last-name-first
ephone-dn 1
number 101 secondary 269969201
label 101
description Interno 101
name Interno 101
ephone-dn 2
number 102 secondary 269969201
label 102
description Interno 102
name Interno 102
ephone-dn 3
number 103 secondary 269969201
label 103
description Interno 103
name Interno 103
ephone 1
username xxxx password xxx
mac-address xxxx
speed-dial 1 102 label "Interno 102"
type 7971
button 1:1
ephone 2
username xxxx password xxx
mac-address xxxx
type 7902
button 1:2
ephone 3
username xxxx password xxxx
mac-address xxxxx
type 7902
button 1:3
Try adding the following commands -
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 bri 0/0/0
network-clock-select 2 bri 0/1/0
This will ensure the DSP's use the same clock reference that is coming in on the BRI ports. This often clears up voice issues on Basic Rate Interfaces.
Similar Messages
-
TS1286 cannot hear voices en phone call can only use headset
cannot hear voices en phone call can only use headset
try to switch to loudspeaker mode. If both loudspeaker and normal mode doesn't work, then ur speaker would be damaged. Visit your nearest apple service center.
-
Need help on displaying the callers name on ip phone with cme using external directory
Hello Guys,
Need help on displaying the callers name on ip phone with cme while using external directory
Thank you,
KhajaThanks for your help,
Does it 100% work with CME. We use SIP and 2ring for external directory? Thanks you. -
first I am very happy for being part of a Cisco community
i have 6 international site in each site the user from 10 to 15 , and i need use video call between these sits , (now the scenario)> i but in each site call manager express ( CME ) 2921 with 1 GB DRAM , all sites connect with each other Through E1 conection , please advice me about this Questions
1- CME can work with vedio call
2- wich IOS version i need for video Feature
3- The CME 2921 Enough or i need better box
and thx for help ....Hello Ahmed,
Welcome to the Cisco family!! :-)
To answer your questions:
1) Yes CME supports Video calls; as usual there are some restrictions and some pre-requisites. I would suggest to go through the feature document that will answer your questions in detail:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevideo.html#wp1012200
2) I would suggest 15.1(4)M or 15.1(4)M1 (which will be coming out in the later part of June). This IOS version will give you the lastets version of CME 8.6. The above document also lists the minimum CME versions required for Video support in case you do not prefer to use 15.1(4)M at this point of time.
FYI, this page shows your what CME version is in what IOS version and its specifications and also has links to the documentation and release notes:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
3) 2921 should work fine.
Hope this helps,
Vishal -
SWA: Web Services call with attachment using 10.1.3 preview?
Has anyone managed to figure out how to invoke a web service with an attachment (using SWA, SOAP with Attachments) with the new 10.1.3 preview release?
Or are there any samples/documents that can point me in the right direction on how to do this?
Thanks!
....AndrzejFinally got 10.1.3 installed, and sure enough, there is an example for the use of SWA (SOAP with Attachments), both as client and as server.
But the notes say it won't run with Oracle Lite DB. Makes me wonder why?
Kinda sucks, since that is what we're using for our proof of concept. <sigh> -
CME SIP phone outside call issue
Dear all,
i have cme version 9.1 on router 2921 with 7962 sccp phones and 3905 sip phone.
when i place outside call ( to pstn) using the below dial peer, call is processed.
when the call is answered by the autoattendent of the called company ( assume i called x company) , i cant press any other numbers using the sip phones.
i mean if i want to press zero for help or internal extension of the x company, these pressed numbered are not recognized by the analog panasonic PBX of the x company.
Sccp phones works well.
Any help please and below is the dial-peer.
dial-peer voice 1003 pots
trunkgroup 1
corlist outgoing CITIES
description CALLING CITIES
destination-pattern 90[1-9]......
forward-digits 8
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip handle-replaces
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface GigabitEthernet0/2.10
bind media source-interface GigabitEthernet0/2.10
registrar server expires max 36000 min 600
voice class codec 5
codec preference 1 g729r8
codec preference 2 g711ulaw
voice register global
mode cme
source-address 10.100.4.20 port 5060
max-dn 200
max-pool 100
load 3905 CP3905.9-2-1-0.loads
authenticate register
timezone 31
date-format D/M/Y
voicemail 177
tftp-path flash:
create profile sync 000473524028932A
conference hardware
voice register dn 1
number 109
allow watch
pickup-call any-group
pickup-group 170
shared-line max-calls 3
voice register pool 1
id mac 6C99.8984.9678
type 3905
number 1 dn 1
template 1
dtmf-relay sip-notify
voice-class codec 5
username SFD1 password SFD1
thanksHi Yahsiel,
firstly thanks for help, secondly if you don't mind i want to ask you the below if possible:
1- in my cme, is there a way when i call an internal extension (e.g 110) from an internal phone it rings normally but when i call from outside-->autoattendent answers-->when i press 110 it get transferred to another phone (e.g 111)....????
2- when i call from outside(pstn) to the cme -->when the plar command is directly to the internal extension the caller id appears but when the autoattendent answers and then transfer to the operator (by pressing zero) the caller id appears as unknown number ??????
3- is the 3905 sip phone support 1Gbps when connected to the PC, as after connecting the phones to the PCs the speed decreased up to 100Mbps?? or it is another matter?
(poe switches is cisco SG200)
regards, -
Duplicate Call on Gatekeeper with CME
Hi,
I have an architecture with 2 CME.
CME A is connected to a gatekeeper and there is no problem when users make some calls.
CME B is not directly connected to the gatekeeper but when a user call an other one on the CME A, I can see the call on the gatekeeper.
Moreover, if a user on CME B try to call a user that is not on the CME A, the call will be forwarded to the gatekeeper and in this case, I have a duplicate call on the gatekeeper.
I have the following dial-peer on the CME B:
voice dial-peer 10 voip
destination-pattern XXXXX
session target ipv4:X.X.X.X (CME A)
On the CME A, I have an incoming dial-peer for CME B calls and an outgoing dial-peer for every call to the gatekeeper (session target ras).
Could you help me to fixe this problem ? I tried to use 2 different loopback interfaces but the problem is still there.
Thank you in advance
VincentHi,
I tried the configurations but it did not change my problem.
I still can see the call on the gatekeeper:
Total number of active calls = 1.
GATEKEEPER CALL INFO
====================
LocalCallID Age(secs) BW
1066-17702 3 16(Kbps)
Endpt(s): Alias E.164Addr
src EP: 0001
Endpt(s): Alias E.164Addr
dst EP: TRUNK_CME_A 0002
CallSignalAddr Port RASSignalAddr Port
10.206.48.236 1720 10.206.48.236 52937
Any other idea ?
Thanks
Vincent -
In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Unable to transfer outside calls twice with CCME 4.0
Hello,
I have a 3825 with a CCME 4.0 and one E1. There is an IVR (from stonevoice) implemented.
When the operator receives the call, she is able to transfer the call to a internal extension (for example 230), but when the user (ext. 230) tries to transfer the call again to another internal extension (ext. 255), the outside caller is still listening the moh and the second destination extension (ext. 255) don't receives the call.
On the phone screen of the ext.230, remains the 2 calls on hold with a message like "transfer not valid or unable to transfer".
I have enabled the h450.2 and h450.3 services:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
service script1 http://192.168.10.114/fw/Apps/IOSIVR/Server/TargetScript/script1.tcl
paramspace english index 1
param operator 99910
param msg_attesa_selection NONE
param alert_time 15
paramspace english language en
param msg_attesa_operator NONE
paramspace english location http://192.168.10.114/fw/Apps/IOSIVR/Server/AudioFiles/
param num_selection1 99906
param num_selection2 99907
param num_selection3 99908
param num_selection4 99909
param welcome_msg _menu_GC.au
param num_selection5 99910
paramspace english prefix en
service cua flash:app-b-acd-2.1.0.0.tcl
param queue-len 20
param aa-hunt1 99900
param queue-manager-debugs 1
param number-of-hunt-grps 2
param aa-hunt2 99901
service grupocastilla flash:app-b-acd-aa-2.1.0.0.tcl
paramspace english index 0
param drop-through-option 1
param second-greeting-time 30
param drop-through-prompt _dt_prompt.au
paramspace english language en
param max-time-vm-retry 2
param voice-mail 1991
param max-time-call-retry 700
param aa-pilot 99910
param number-of-hunt-grps 1
paramspace english location flash:
param handoff-string grupocastilla
param call-retry-timer 15
param service-name cua
dial-peer voice 104 voip
service grupocastilla
destination-pattern 99910
description queue loopback
session target ipv4:192.168.10.50
incoming called-number 99910
codec g711ulaw
telephony-service
load 7960-7940 P0030702T023
load 7914 S00104000100
load 7905 CP7905080001SCCP051117A
load 7920 cmterm_7920.4.0-02-00
load 7912 CP7912080001SCCP051117A
max-ephones 168
max-dn 500
ip source-address 192.168.100.1 port 2000
timeouts interdigit 5
system message CCME
cnf-file perphone
user-locale ES
network-locale ES
time-zone 26
time-format 24
date-format dd-mm-yy
voicemail 1999
max-conferences 24 gain -6
call-forward pattern .T
moh music-on-hold.au
web admin system name ird secret 5 $1$9raP$zImXvNHnQIUFoM.EfkeP31
time-webedit
transfer-system full-consult
transfer-pattern ...
transfer-pattern ....
transfer-pattern 1...
transfer-pattern 9...
transfer-pattern .T
after-hours block pattern 1 0906 7-24
after-hours block pattern 2 0905 7-24
after-hours block pattern 3 080 7-24
after-hours block pattern 4 000 7-24
create cnf-files version-stamp 7960 Sep 21 2006 18:07:37
ephone-hunt 1 longest-idle
pilot 99900
list 99980, 99981
timeout 14, 14
statistics collect
description OperatorCan you test the following and tell us what happens ?
a. Call 230 from an internal extension, transfer to internal extension B, and then do a second transfer from B to C.
b. Call 230 from outside, transfer to internal extension B , and then do a second transfer from B to C.
c. Call the operator from inside, transfer to 230, and then do a second transfer from 230 to 255.
d. Call the operator from outside, transfer to 230, then transfer to 255. (We know this fails, so this is just FYI, no need to test this).
HTH
Sankar. -
Using Voice command to call some one...
Hello,
On the key note presentation in June the Steve Jobbs had done he used voice command to call a person.
How do you go about doing the set up for that. I can not seem to do it.
SeanI could swear he did because he made a comment along the lines that "today's technology" ...
I could be wrong but I can not quote his comment but I know he made a comment about it before he did it.....
Oh well. One would think with the issue of driving and cell phone this would of been included.
Sean -
Why can´t i use face time call with on my ipod touch with ios6
Why can´t i use face time call with on my ipod touch with ios6
iTech, First change your apple password, than go to 'setting' and than click on 'Facetime' and make sure your facetime email is right than retry. Also calling apple support can help you or the best way is to go down to the apple store for direct help. I really hope that what i have told you have helped and try to reset your iphone.
iTech Support Team -
When using compressor voice is not sync with video. What causes this and how to fix it, please?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
Performance - using JDBC call with 'order by' vs sorting data on app server
Hello! I need some valid thoughts on the performance of using a JDBC call versus processing information on the application server.
Here is the somewhat simplified scenario:
I need to retrieve customer information (name, e-mail, telephone), display it in HTML format and then be able to redisplay it in a different order. For example, initially the list would be displayed sorted by last name, but then a user might choose to sort it by e-mail address. Initial call to DB uses 'order by' in the SQL stmt to get me the initial ordering by last name. Results are stored in 2D array. However, when a user selects a different sort I have two options:
1) just make another call to the DB with a different order by clause. This means I need to create a DB connection, connect to DB, retrieve the results and read them from result set into a 2 dimensional array
2) re-sort data in the 2D array populated during the initial call. This means I need to use java.util.Arrays.sort(my_2D_resultsArray, my_custom_comparator)
Question is : which is more efficient? Number of entries retrieved can be anywhere from 0 to a few thousands (depending on other filters such as customer's country). My feeling is that option umber 2 is better, but I would like to get your opinion.
Thank you!Good points! Thanks! I ran a test (see code below) and it takes less than a second to sort 2000 Strings and 2000 nulls. The only thing I ran the test at a UNIX prompt as oppose to from within app server (Weblogic). I expect the speed to be compatible though. Do you think that test was valid and tells us that sorting on the app server is probably faster than doing another SQL query?
import java.io.*;
import java.math.*;
import java.util.*;
import java.util.Arrays.*;
public class Test {
public static void main(String[] args) throws Exception {
Test test = new Test();
test.testSortingPerformance();
public void testSortingPerformance() {
Object[] objArray2 = new Object[]{};
Vector v = new Vector();
Date start, end;
java.util.Random rd = new java.util.Random(2000);
for (int i = 0; i < 2000; i++){
v.add(new Object[]{new String("" + rd.nextInt())});
v.add(new Object[]{null});
objArray2 = v.toArray();
Object[] innerObjArray2 = new Object[]{};
MyComparator2 myComp = new MyComparator2();
start = new Date();
java.util.Arrays.sort(objArray2, myComp);
end = new Date();
for (int i = 0; i < objArray2.length; i++) {
System.out.println();
innerObjArray2 = (Object[])objArray2;
for (int j = 0; j < innerObjArray2.length; j++) {
System.out.print(innerObjArray2[j] + " ");
System.out.println(v.size());
System.out.println("Start " + start + " End " + end);
import java.util.*;
public class MyComparator2
implements Comparator {
//position in the inner array to use for comparison
private int position = 0;
//default empty constructor
public MyComparator2() {
//implement compare method
public int compare(Object o1, Object o2) {
Object[] strAr1 = (Object[]) o1;
Object[] strAr2 = (Object[]) o2;
if (strAr1[0] == null){
if (strAr2[0] == null){
return 0;
else{
return -1;
else if (strAr2[0] == null){
return 1;
return ( (String) strAr1[0]).compareTo( (String) strAr2[0]); -
How to call a stored procedure on time basis with out using sql job and GOTO
Hi,
I wanted to call a stored proc, on time basis ,
please tel me how it can be done with out using sql job , goto .
1) That is, is there any timer aviable in sqlserver.
q2) And which one is better GOTO or sql job.
yours sincerleyRaj, Check if my explanation helps you:
Your job runs every 10 seconds.
Lets say first time you are scheduling and running your job at 12:00:00 PM
Now your proc will start executing.
Say it got finished at 12:00:07.
Now the next schedule time is 12:00:10 PM.
The moment this time hits, the job will get invoked and start executing the proc.
Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go.
PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
your logics inside are complex), you should optimize your code and table architecture.
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is. -
What's the best phone app to use on iPad for uk users to make calls with
I know there's a few apps out there to use and make phone calls with, but which is the best one for uk users/callers.
I would prefer not to use Skype but if that's the best on the market, that's what I will use.
As you can probably guess I'm new to the iPad, so all the help I get is appreciated loads.Cheers for that, looks like I will have to use Skype then. Unless someone else comes up with an answer.
Maybe you are looking for
-
How to embed Flex swf into existing Flash?
Hello, I am brand new to Flex, so I desperately need your help! I have an existing Flash file, written in Flash 8. When I open this file, it plays in Flash Player 9, the latest player I have installed on my machine. This Flash file tries to dynamical
-
Non-Interactive Report Break Formatting
I have a non-interactive report that is very large and I am trying to use break formatting to provide subtotals. It works, but is quite ugly. Can anyone tell me where I might find a list of the various substitution strings that can be used for contro
-
Bonjour, j'ai téléchargé des Toolbox pour Pages et Keynotes et quand j'ouvre ces applications elles se ferment tout de suite quoi faire? Est-ce qu'il y a une façon de procéder que je n'ai pas saisi?
-
Photoshop CC r6025 pure virtual function call
I recently signed up for Creative Cloud and shortly after that I started to recieve the r6025 pure virtual function call error with PS CC crashing. This will happen with both the x86 and x64 versions of PS CC. It does not happen every time, only abou
-
Hello