Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
The audio file formats which fail to stream are:  mp3 and wav
The video file formats which fail to stream are:  mp4, avi and 3gp
JPEG Images appear to work fine, but I haven't tried other formats.
I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
Any ideas?

Hi juicespeare1,
Welcome to the Sony Community!
Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

  • 3.6.16 doesn't support Mac PowerPCS so some video content will not load

    I am running Mac OS 10.4.7 on a Mac Mini Power PC. Firefox 3.6.16 does not support Power PCs (i.e. pre Intel). Video content on many sites will not load using 3.6.16 and I cannot use this version of your browser. I am happy to keep using 3.6.12 which does support Mac Power PC but 3.6.16 keeps downloading automatically even though I have set Advanced controls in Preferences to not do this (unchecked the three boxes enabling auto updates). I am extremely unhappy about this. Can you tell me some way I can stop 3.6.16 from automatically downloading and updating my browser against my wishes?

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

  • "iMovie doesn't lock the audio to the video - it's an old, old problem"

    Lot's of people have had problems keeping long video clips in sync with their audio in iMovie. I think what this guy says is correct:
    http://forums.mactalk.com.au/11/49711-imovie-hd-sound-out-sync.html#post608307
    "iMovie doesn't lock the audio to the video - it's an old, old problem either you import in short segments so the sound doesn't get too far out of sync or you buy Final Cut Express - it does lock the audio to the video".
    ...and unfortunately I don't know of a way to import in small sections if you've recorded say 4 minutes worth of continuous footage.
    (Come on Jobs get it together!)

    You can replace your internal DVD drive, or get an external DVD drive.
    Note: If your Mac had an internal drive, the Apple external USB DVD drive won't work with it. It's designed to be used only with Macs that don't have internal DVD drives, i.e., MacBook Airs, MacMinis, etc.

  • Streaming audio and/or video crashes your router BEFW11s4 firmware problem

    Ok!!! Apparently some of us have had the problem where trying to stream audio and/or video can cause the Linsys BEFW11S4 to crash, where only a power down and re-up will retore communication. Changing the MTU size has been suggested ad-nausium. I hope this works for you all, because it worked for me.
    Apparently the latest firmware is the problem. I just installed an older firmware version and problem solved (1.50.14).
    ftp://ftp.linksys.com/pub/network/befw11s4_v4_v1.50.14_code.bin
    So, looks like maybe Linksys could hopefully issue another firmware update that fixes this (we hate having to use old firmware... trading off one bug fix for other multiple bugs that may rear their ugly head later on).
    list of bugfix history found here:
    http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=text%2Fplain&blobheadervalue2=inline%3B+filename%3Dbefw11s4_v4_v1.52.02_ver.txt&blobkey=id&blobtable=MungoBlobs&blobwhere=1130824460891&ssbinary=true

    Hi all -
    This looks like this will fix the issue I have with my router. I'm willing to try it, anyway.
    My question is pretty basic: What do I do after I download the file?
    Thanks, Kate

  • What's the wave's number of iPhone 4S speakers? I need to know what's the number because my phone doesn't play any sounds, and I kind of knew what's the problem and sulotion!

    What's the wave's number of iPhone 4S speakers? I need to know what's the number because my phone doesn't play any sounds, and I kind of knew what's the problem and solution!
    What I mean by wave is like radio channels' waves! Ex. 104.1

    Your statement makes no sense.
    Have you tried basic troubleshooting from the User's Guide to rule out some setting in the device preventing the speaker from working?
    Is the mute switch on?
    Do other sounds work?
    Does it produce sound with headphones plugged in?

  • HT3775 Why doesn't QuickTime play audio for some avi videos?

    Why doesn't QuickTime play audio for some avi videos? Is there a download to help resovle this.
    I am running Mountain Lion, I have also installed flipformac, divx, and vlc. They are working fine.
    Appreciate your answers.

    You can only use QuickTime Player 7 to play that 12 year old format.

  • Streaming interruptions (audio and video)

    Sorry if this has been already reported but I can't really find a good answer.
    I recently replaced my first gen AppleTV with a new one and have been experiencing audio and video drops intermittently.  When I use iTunes to stream music from my MacBook Pro the audio will play well for the most part but, every once in a while the audio drops out then comes back.  Very frustrating when you are into a song!  Likewise, when I stream from Netflix (which I do often) the movie will be interrupted, the screen goes black and the audio drops for several seconds then comes back.  When I stream Netflix from my BD player it works flawlessly.  Both the BD player and AppleTV are connected to the router via wires to a 100Mbps switch.  The MacBook Pro is streaming via wireless.
    Any suggestions?
    Thanks!

    Buy another product

  • How to Stream live Audio and metadata

    Helo there,
    i'm trying to build some kind of online radio. Therefore i'll be streaming audio (mp3) in real time.
    Ok,  so here's my problem: i have a play-list on my server and the idea is  for this play-list to play all day long, but on the client side  the user can only do play and stop the music.
    The problem is  when one music stops and the next one starts i need the server to send  not only the new audio but also all the info about this file: duration,  author and music name, this way my player can show a play /stop and all  the info about the current music playing.
    Until now i've only come across with video live streaming, but very  little information on how to do a live transmission of audio.
    ps: the only info on streaming audio that i've found so far is about  audio on demand, but the way i want things to happen the client can't  chose the music.
    any ideas?
    thanks in advance!
    Marco Monteiro

    I think you can use Server-side Stream object to create a playlist and other functions on server-side.
    Basically you can add your mp3 files to be played, basically just their names to an array object, and on the fly update it.
    Now take first file from the array and create the playlist and keep on adding new files from the names array.
    Also you can define onPlayStatus on your stream object to track when one song finishes and other starts.
    Also since you have names of the files, you can set an interval based on current song's duration which would get triggered and send information to client of next song to be played. For this you can use onId3 method as mp3 files would not have metadata defined.

  • How do I enable SSL to serve swfs and non video content in FMS 4.5

    I'm running FMS 4.5 with the built in Apache server on a Windows 2003 server running SP2.  Our users are complaining that embedded videos in Chrome aren't displaying properly because the SWFs and some of the non video content are being delivered over http instead of https.  I'm having trouble finding any documentation on how to add an SSL cert to the Apache server and enabling it to serve content over 443.  I've requested my cert and am following my CA's docs on adding the cert to Apache, but I'm not seeing the VirtualDirectory referenced in the httpd.conf file.  I'm relatively new to Apache configuration, so please include as much detail as possible in your answer.  Thanks in advance for any assistance.

    Look for httpd-hls-secure.conf file in AMS(FMS) Apache Bundle. httpd.conf includes this file. This enables SSL for key delivery for HLS. You may like to do the same for other cases.
    Other than this, you have to enable the LoadModule mod_ssl in httpd.conf.

  • E3000 wont allow streaming of some video content to IPhone 4s

    I have just upgraded from an E1000 to the E3000 and have run into a couple of problems with my iphone 4s.
    There are a few applications, BBC iplayer, Sky Go, BBC News and ITV player that wont allow me to watch any of the online video through the iphone. I have iplayer on two other computers running through the same router and they work fine.
    Every thing worked fine with my old E1000 so I'm taking it that it must be a setting in the router itself somewhere that needs to be altered to allow it to work.
    Any suggestions?

    There might be some settings required in the router so that it gets the proper signal strength. Well you can try the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
    1] Open the software and go to the option which says "Router Settings"
    2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
    3] Then go to the Wireless tab, keep network mode as mixed,
    For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
    For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

  • My App Store Doesn't Show Any Thing , and not working .

    Today I've Noticed that My App Store Application is Not Working , and even I Can't Click On any Tabs ,and all of menu bar items such as sign out,sign in doesn't work . and doesn't Show Loading Status Bar, and doesn't show any message as you see in this picture :
    I've Tried There Solutions:
    Reset PRAM
    Delete App Store Cache Files
    Signed Out of Itunes And and signed in again
    clear History and web site data in safari
    But Nothing Changed .
    (Sorry My English is Not Good at all , But i'll be thankful if you help me )

    Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
    Step 2
    Log out or restart the computer.
    Step 3
    Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
    Step 4
    Start up in safe mode and log in to the account with the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    After testing, restart as usual (not in safe mode.)
    Step 5
    If possible, connect to a different network and test.
    Step 6
    There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm.

  • VoIP Phone Call from mobile to PC - Streaming the audio and playing it back

    In short:
    How can I stream the audio captured from a mobile to PC and play it back.
    In brief:
    I am trying to develope an application to chat(voice) between a J2ME program and a Java program which is running in a PC.
    Currently I am able to send and receive the text message by using SIP protocol after establishing session by using SIP protocol.
    As a next step, I want to capture the audio and play back in PC and Mobile.
    Now, I am able to capture audio from the microphone of the mobile.
    Player p =Manager.createPlayer("capture://audio?rate=8000&bits=8&Channels=1");
                    p.realize();
                    // get the RecordControl over this Player
                    RecordControl rc = (RecordControl)p.getControl("RecordControl");
                    // create an OutputStream which the RecordControl will use
                    // to write write the recorded data.
                    ByteArrayOutputStream output = new ByteArrayOutputStream();
                    rc.setRecordStream(output);
                    // start the recording
                    rc.startRecord();
                    p.start();How can I stream it to PC and play it back? Also, I need to send audio captured from PC to mobile and have to play it back.
    Pl. do reply.

    now I am able to play the stream (with some delay),
    while(inputStream.read(buf)!=-1) {
                        try {
                            ByteArrayInputStream recordedInputStream = new ByteArrayInputStream(buf);
                            play2 = Manager.createPlayer(recordedInputStream, "audio/x-wav");
                            System.out.println("Playback player created...");
                            play2.prefetch();
                            System.out.println("Playback player prefetched...");
                            play2.realize();
                            System.out.println("Playback player realized...");
                            play2.start();
                            System.out.println("Playback player started...");
                        } catch (MediaException ex) {
                            ex.printStackTrace();
                        } catch(Exception e) {
                            e.printStackTrace();
                        }But, the problem is , I have to play the audio, as well as capture the audio to create the duplex communication.
    Is it possible to do the audio capture and playback simultaneously? If it is not possible, pl suggest an idea to achieve this.
    null

  • Windows 10 IDT High Definition Audio Codec doesn't work properly on Hp Envy 20d001-la after update

     I'm using a Windows 10 just updated pc, Hp Envy 20 d001la,  and I'm having problems with my speakers, they work with  IDT High Definition Audio Codec driver. It has beatsAudio available, but the bass don't sound the right way, I can barely hear it. It has a low quality sound...  the worst quality. This problem isn't new for me, when upgraded to Windows 8.1, also the problem apeared, when the driver released with a new version, specificly for Windows 8.1, but how did I solve it? I only installed the Original Audio Controller found on Hp Support & drivers page (It was designed for work on Windows 8 64 bits). So, I know Windows 10 is newer than ever, and sure of some bugs or little corrections after updating. But when I try to install the Windows 8 Original controller to get the extreme sound quality again, it can't be installed. The problem says: "Operating system doesn't has the requirements" The new drivers have low sound quality (driver Windows 8.1 & Windows 10 versions) If I could install the Windows 8 version driver, I'm sure the sound quality returns. Thanks in advance.

    Hi!  Thanks a lot, I've tried the solution you've given me, (extracted the setup file with winrar on a folder and search for the driver as you said) but an error message shows: "There are not compatible drivers on the selected folder, try with one for Windows x64" It happens with both drivers I have, W8 & W8.1 versions. And also I have other problem, I didn't connect the headphones when trying solving the problem, and when I connected them, a surprise: The speakers didn't shutdown, they continue playing sounds and the headphones and speakers were playing sound at the same time. I've checked for the internal connector and The connector is clean. Then I tried to install W8.0 IDT setup manually clicking on the files extracted, the process finished succesfully, and system restarted, the sound quality came again, but still when I connect the headphones, the speakers don't shutdown and sometimes music stops. The problem is with all versions of driver I tried, the W10 got by Windows update, the found on Device Manager, the W8 , W8.1installed manually, But not worked.I hope in a future upade the problem could be solved, because I listen to music always only on headphones to avoid disturb others. Thanks, I'm trying a new method if is kanown for you. Thanks a lot.

  • Oracle Application Server Control Console doesn't show any servers

    Hi there.
    I'm configuring the Identity Manager, and in the process of doing so, I've to user tthe OASCC to do some operations.
    I've discovered how to launch the OASCC and I can access it. The problem is that after configuring the ias_admin password the main menu doesn't show information.
    Here is the link to the print screen with the main menu: [http://picasaweb.google.pt/r.vilhs/Oracle#5276306768949033090]
    Am I missing something?
    Regards,
    Ricardo Vilhena

    I have the same problem and I checked my target.xml file - it was in place and it contained both target records - with port number 18200 - I tried to acces this address, but it gave 404 error - actaully - this is better than nothing - beacause it indicates that someone is listening to this port, but it has no default page to display. Well - documentation states that 18200 is Oracle Management Agent port but I have not yet figured out what to expect from it. In my installation I have observed:
    1) I have running app server 10.3.1 on port 7777, but the weolcome page doesn't display the login portlet for logging in this server - so - I have not logged into it.
    2) I have problems accessing app server 10.2.1 on port 15001, I guess it is down and I have tried to start it from start menu entries - without result. I guess - this is very important server - it contains the forms.
    But weill - at present I cann't see anu connection between these two server and the entries in the target page on port 18100, I guess - that this page should display both server, but in the post was said only entry for on port... Maybe management agent is for boths app servers (and not separate agent for each server?)?

  • Built-In Audio doesn't feed any Audio editing software like Soundtrack.

    I am trying to record streaming audio from the internet through the built in audio in and out in the computer using Soundtrack. I can drag wav. files in and they play, I record with the built in mic, it plays, but audio coming internally doesn't show, itunes, internet etc.

    The sound being played by applications is not really audio input. Audio input has to be coming from an external source, such as through the built-in mic or the audio input port, or possibly USB/FireWire if you have such a device connected.
    You can connect a mini-stereo jack cable to your audio output port and feed it back into your audio input port.
    Or you can get a program such as WireTap
    http://www.ambrosiasw.com/utilities/wiretap/
    that is specifically designed to record what other apps are playing.

Maybe you are looking for