Portal Content error when opening BEx Portfolio in EP

I am trying to open BEx portfolio but an error is coming when i tried to opne it. The error is as below :
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:06_21/04/11_0097_35740651
Refer to the log file for details about this exception.
Also the End User flag is set(checked) in the System admin->System config->System landscape -> permissions-> everyone role.
Also in content admin->portal content->System landscape -> permissions-> everyone the enduser flag is set
Thanks in advance.
regards,
NJ

Similar Messages

Portal Runtime Error when opening Webflow workitem in UWL

Hi,
I have recently configured the UWL to pick up workitems from SAP workflow on a background system. The workitems are appearing OK in the Task folder. However, when I try to open a workitem by double-clicking on it, I get the following error:
Portal Runtime Error
An Exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:33_30/09/10_0010_24209150
Refer to the log file for details about this exception.
NB. This only seems to happen for items that would be shown via the SAP GUI (E.g. a Confirming a task completion or user decision). The workitem runs OK if it is for a task that is visualised as a Web Dynpro app and specified in transaction SWFVISU.
I have not configured Delta Refresh options in the Workflow Administrator so do not know if this is a possible reason (I assumed that this would not cause a problem and would simply mean that refreshes only occur once every 60 seconds). Any help would be greatly appreciated. I am fairly new to Portal & UWL I would also be grateful if someone could tell where I can find the relevant log files referenced in the original error.
Regards
Simon

Hey Simon,
Welcome to UWL :). Portal Runtime Errors in UWL don't always signify that there is a UWL issue. This could be a permissions problem, etc. I'm not sure what version of the portal that you are using. But here is a little trick for you when checking logs...you can enter in the following: irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.admin.logviewer.default
and check the log file with the id that was given in the error.
Exception ID: 05:33_30/09/10_0010_24209150 is your exception id. Search for the log files in the default trace and see what the exact error message is. If you can post this here it would be great.
The log files can be found in the following location:
/usr/sap/<SID>/JC<InstanceNumber>/j2ee/cluster/
server<number>/log
or by entering the URL that I mentioned above.
Please let me know in the next reply what the portal version is:
You can get this information by doing the following:
a. log on to the portal
b. backspace out the irj/portal section of the URL
c. click enter.
d. You are now at the J2EE administration page.
e. Next, click on the system information link
f. Please click on the all components link
g. Please attach this information to the message.
I am interested mostly in the UWLJWF component but if you can attach the full software component info to this post that would be great...
Please note, that note number 1133821 is an important note that is needed in the UWL. Did you maintain your RFC destination accordingly?
Here is some additional information to help you too since you are new to UWL:
[UWL Wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq]
[UWL Forums|SAP Enterprise Portal: Application Integration;
[Business Task Management|http://help.sap.com/saphelp_nw70/helpdata/en/9e/ccf62fff3e4a45a634e592dabb45d5/frameset.htm]
[Using Universal Worklist|http://help.sap.com/saphelp_nw04s/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm]
[JavaDocs UWL API|http://help.sap.com/javadocs/NW04S/current/uw/overview-summary.html]
I hope that you find this information useful!
Best Regards,
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Error when opening BEX!

Hi guys,
We have just installed the 710 GUI and when i try to open a Query in BEX or even the Query designer i get the following error: "RSOBJS 170 serious error occurred while reading history folder". When i click on ok it goes to 3.x and says "opening 3.x workbook for upgrade" and comes up with various message popups; Problems while ready query metadata for query: SAPBEXq0002.
Please does anyone have any advice on how to resove this issue? Thanks, points will be given.

Dear all,
we have also received a similar problem. When starting BEx Analyzer this error appears sometimes ... curiously, it does not always appear, but only when Excel has been opened before enabling the Analyzer-AddIn.
It would be great if anyone has a solution for this.
Best regards.
T. Duong

Error when opening BEX from the WEB BI aplication

Helo,
I want to launch the BEW web application from the BI Launch pad.
When i enter the username/ password for the BW system i git the followong error:
BEx Web Application
BEx Web Application Session Management
Exception occured while processing the current request; this exception cannot be handled by the application orframework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience
Copyright © SAP AG. All Rights Reserved.
I did all the steps descibed in the following link:
URL http://wiki.sdn.sap.com/wiki/display/BOBJ/ConfigurationstepstointegrateBExWebapplicationsintoBI+4.x
Do you have an idea how to solve this issue?
Reards,
Hassan

Mike,
It looks like ni.com is not supplying that particular console object which is causing an issue with the embedded instance of IE9. Every other website I've tried works correctly. I've looked around the ActiveX methods to intercept and ignore this error, but I haven't found anything yet.
For others' reference, here is the link to the example:
https://decibel.ni.com/content/docs/DOC-2042
Karl G.
Applications Engineer
ni.com/support

Bex Web designer. Java ccommunication error. Error when opening rfc connec

Dear All,
Whenever we open Bex web designer we get a error message box " Java communication error : Error when opening rfc connection"
This error seems to be due to incorrect BW and Portal configuragtion.
Can anybody let me how to correct the error by doing the right BW and portal configuration. I serached many documents as well as in sdn but no concrete procedure is provided. I am in need of urgent help regarding this.
Thanks in advance.
Warm regards
Mazdul

In one of the notes therre was a link. I opened the link in my portal server. There was a check list where all the conditions that were not met were marked with red. I corrected most of them according to the check list. Now the error is due to SSO not configured properly.
BEX should work fine when this is done.
Warm Regards
Mazdul

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Error when opening Capacity Planner and Performance Manager

Hello,
I am having an error when opening Performance Manager or Capacity Planner under 9i OEM in our environment. I started at the company about 2 months ago, and have not used these tools until yesterday - and just found these errors. Below is a link to a screenshot of the errors. Does anybody have any ideas?
http://www.webgenstudios.com/misc_images/ora1.jpg
Thanks,
-Bob

Which are the contents of the log file produced during installation of OEM...????
OEM was installed on its host machine about 4 years ago, long before I started with this company. I don't know if the logs are still there or not. Where should I be looking?
Do all other parts of OEM operate successfully...????
Yes, everything besides Cap Planner & Perf Mgr.
Is this in Standalone Mode or Oracle Management Server Mode?
The issue occurs in both modes.

Error when opening Count for Campaigns ZSEG_D02_Q0001.

I get the attached error when opening Count for Campaigns ZSEG_D02_Q0001 on the portal.
Please tell me what can be the reason behind this.

Hi,
you write field routine for that infoobject(BPSTATE), like below.
DATA X TYPE /BI0/OIBPSTATE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = <SOURCE_FIELDS>-BPSTATE
          IMPORTING
            OUTPUT = X.
RESULT = X.
I HOPE IT SHOULD WORK.
Regards,
Ranganath.

Error when opening iWeb 09

After using iWeb 09 since it was released, I now get this error when opening the app.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Cloud 9.webtheme/Spanish.lproj/Podcast.webtemplate.”
I have tried opening from and external back up hard drive and also use Time Machine to replace the iWeb on my internal hard drive.
What's next?

Hi there. I think I am having a similar problem. I was looking at some files in iWeb, but I don't believe I changed this one. I changed one of the "playtime" theme files, but then I changed it back. Anyway, I did look at the Modern Frame theme files but I didn't change them because I use them for a couple of my sites, and I was afraid to change anything. Maybe I did by accident? Anyway, here is the error I received.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Modern Frame.webtheme/da.lproj/About Me.webtemplate.”
I am unable to open iWeb at all. That'll teach me.
Thanks!

CF 8 CFPDF "Merged" document throws 131 Error when opened in Acrobat

We are using CF 8 on Windows Server 2003 platform.
Any CFPDF "Merged" documents are throwing 131 Errors when opened in Acrobat
Tried re-saving the documents on local machine and still same problem. Tried opening in multiple versions of Acrobat, same problem.
Individual documents created are opening without issue. It is Only when these documents are merged that this error occurs.
We do not experience this behavior in our CF 10 environment.
We are a Big, Slow moving enterprise here so not much chance of getting our CF 10 environments promoted to meaningful production use soon.
Found virtually nothing in HelpX and nothing online of any value regarding this issue.
Has anyone else experienced the issue noted in the title of this discussion?
Has anyone a work around or solution?

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

Portal Runtime Error when excecuting a published iview

Hi,
I have an issue concerning the iviews published by the BEx 7.0 to the Portal. I get a Portal Runtime Error when I execute them on the portal.
The log on J2EE server is:
Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.scheme>://<System.servername>:<System.serverport><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-bw-iViewID=<FPN.PCDHomeLocation[url_ENCODE]>&sap-ext-sid=<ESID[url_ENCODE]>&sap-pp-producerid=<producerID>&sap-pp-consumerBaseURL=<Request.BaseURL[url_ENCODE]>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<BusinessParameters>&\#39;; the problem occured at position 138. Cannot process expression <FPN.PCDHomeLocation>
My support package levels are:
SAP_ABA     700     0013     SAPKA70013
SAP_BASIS     700     0013     SAPKB70013
PI_BASIS     2006_1_700     0002     SAPKIPYM02
ST-PI     2005_1_700     0005     SAPKITLQI5
SAP_BW     700     0015     SAPKW70015
BI_CONT     703     0008     SAPKIBIIP8
ST-A/PI     01J_BCO700     0000          -
Any ideas ?
Thanks in advance
Thibaut

Hi Erik,
When we confure system at portal under system admin tab, we wil have a dropdown to display
the system object properties i.e. system alias,test conections ,permissions and delta link tracer.
Here we will find option to add system alias.
And Cache admin will be present at Aministrator level.Ask ur basis to do this.
I m talking in perspective of EP7.0 SP 11.
Hope this helps.
Regards,
Shaila

Error when opening RFC Connection

Hello SAPers,
I have configured PDA in my ECC6.0 --- XI (ABAP+JAVA) Which was successful.
In my Web Dyno Pro Content Administrator
I have performed the JCO Destinations test which was successful
when I go to the URL
http://server:port/webdynpro/dispatcher/sap.com/isisrsrsmenapp/MainApp
entered the store number
In the next menu
Inventory Lookup when I enter the Article number and press Go Button
It is giving me error " Error when opening RFC Connection "
Rest of them working perfectly...
Do I need to do any configuration In Visual Admin?
Could anyone advice
Thanks In Advance
HariKrishna

Thanks it got solved it was an error in RFC, I have changed the RFC now it is working fine
Thanks
Hari

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Portal runtime error when trying to create new Iviews in EP

Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AM

Krishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

Portal Content error when opening BEx Portfolio in EP

Similar Messages

Maybe you are looking for