Portal netlet's for intranet web pages are cached. Why is content from one being used when I select another?

I setup a netlet that uses port 80 and some app specific ports for two different netlets. If I click on one (say webapp1), I will get the correct content for webapp1. I close webapp1. The next one (say webapp2) I will sometimes get the previous web site's (webapp1) content. It seems a little flaky. I wasn't sure if there is a timeout value needed here.

I setup a netlet that uses port 80 and some app specific ports for two different netlets. If I click on one (say webapp1), I will get the correct content for webapp1. I close webapp1. The next one (say webapp2) I will sometimes get the previous web site's (webapp1) content. It seems a little flaky. I wasn't sure if there is a timeout value needed here.

Similar Messages

  • Why is the template not being used when dynamic page called ?

    Hi,
    I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
    Why is the template not being used ? How can I get the template working when I call the dynamic page ?
    I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
    thanks,
    Mainak

    You can alter the generated package body to include the following function in the header and footer sections.
    Header:
    PORTAL.wwv_headings.show_header(
    p_template => 'PUBLIC.TEMPLATE_3',
    p_heading => 'Dynamic Page',
    p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
    p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
    Footer:
    PORTAL.wwv_headings.show_footer(
    p_template => 'PUBLIC.TEMPLATE_3',
    p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
    where
    <PORTAL_DEMO> indicates application schema
    <PORTAL> indicates the name of the portal (normally this will be portal30 by default).

  • Hello!  I have an iMac that I lose the audio output for certain profiles.  The audio output will work on one profile, but when switching to another profile, I lose the audio output.  I've reset the NVRAM/PRAM and that hasn't solved the problem.  Help!

    Hello!
    I have an iMac (running iOS 10.6.8, not upgraded to Lion) that I'm having audio issues with.  I have 5 profiles on this machine.  The audio output will work fine out of one profile, then when switched to another, the profile will not have any audio output at all.  Rebooting the machine will occasionally solve the problem.  Administrator permissions are not the issue since this has also manifested itself on the administrator profile. I've also reset the NVRAM/PRAM and that hasn't helped.  All my software is up to date and I recently upgraded the RAM to 2x2GB sticks.  This problem was existing prior to the RAM upgrade. 
    Any suggestions?  Thanks in advance!

    Hi Tony,
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • Firefox is now hard to load, and no matter what I click on for a web page, or even my mail I get the connection was reset and I have to hit the try again button 5 - 6 times usually to get the page to load.

    I updated internet explorer also changing my server provider so that my web page contact emails would go thru. I have quest broadband and could not use my yahoo accounts as they are not compatible, had me open a q.com email will transfer to outlook for my web pages. That all works, but now firefox is acting up.

    Many business users chose to use the downgrade option to XP until Windows 7 had been out awhile longer ,which may be what happened on your machine. Where I work, most all of the machines still run XP.
    Recovery Disks contain the OS and all drivers/software for a specific model. A plain Windows disk contains just the OS.Not sure which you have, but a true Recovery Disk set will not work on any machine.
    It really sounds like you have a Windows Repair disk which requires a backup image to repair an installation.Could you confirm what exact disk you have?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Safari has become unusable-it freezes, links are unclickable, then I get Web pages are not responding...

    Safari has become unusable—it freezes, links are unclickable, then I get "Web pages are not responding..."
    Safari has been my favorite browser for a long time. Nothing against the others but I have found it faster and better. Now I can really no longer use it. This has been going on and getting worse for atr least  few weeks. Anyone know why?

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    If any extensions are installed, disable them and test.

  • Web pages are not automatically published. First they are saved as drafts with a .new extension.

    Hi,
    I am curently using adobe CS3. I am facing this strange
    problem where my web pages are being saved with a .new extension
    when I am tryign to publish. Everytime I need to go and change the
    extension from .cfm.new to .cfm inorder to see the changes made to
    the web page. I have even enabled the option so that contribute
    does not send the page for reviewing before publsihing. Even after
    enabling it I am facine the same problem. And this problem is being
    faced by everyone who has publishing rights including the admin.
    Can anyone please suggest a way to get rid of the .new extension
    after publishing.
    Your help will be greatly appreciated.
    Thanks!

    We, too, are having this problem.  I see two posts in 2008-07 reporting this, but no answers and nothing via Google.
    Details:
    1. The web server is a Red Hat Linux / Apache.
    2. It seems site-wide:  several department webmasters have reported the problem.  It may be limited to webs that are using Contribute and check-in/check-out.
    3. The only thing I can think might be causing it is that our NTP daemon is broken, and the time of day drifted ~6 minutes (I have since reset the clock by hand).

  • Web pages are not responding

    I often get the message that "web pages are not responding".  Safari seems to slow down to a crawl, I've reset Safari and emptied the caches, t may get better for a few minutes but then returns it's slow down. Someone said to quit safari and then trash Home/Library/Caches/com.apple.Safari/ folder. That doesn't seem to help. Does anyone have any suggestions how to solve this annoying problem?

    Read this whole message before doing anything.
    Back up all data.
    Quit Safari if it’s running. Then select
     ▹ Force Quit…
    from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
    Step 1
    In the Finder, press the key combination shift-command-A to open the Applications folder. Select the Safari icon in that folder and press the key combination command-I to open the Info window. There’s a checkbox in the Info window labeled Open in 32-bit mode. Uncheck it, if checked. Close the Info window and the Applications folder.
    If Adobe Flash Player is installed, select
     ▹ System Preferences ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
    Caches/com.apple.Safari
    Caches/com.apple.WebKit.PluginProcess
    Caches/Metadata/Safari
    Preferences/com.apple.WebKit.PluginHost.plist
    Preferences/com.apple.WebKit.PluginProcess.plist
    Saved Application State/com.apple.Safari.savedState
    Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder. If you still have problems, continue.
    Step 2
    Triple-click anywhere in the line below to select it:
    rm -fr $TMPDIR../C/com.apple.Safari
    Copy the selected text to the Clipboard (command-C).
    Quit Safari again. Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal. Launch Safari and test.
    Step 3
    If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
    Cookies/Cookies.binarycookies
    Internet Plug-Ins
    Preferences/com.apple.Safari.LSSharedFileList.plist
    Preferences/com.apple.Safari.plist
    Preferences/com.apple.Safari.RSS.plist
    Preferences/com.apple.WebFoundation.plist
    PubSub/Database
    Safari
    (Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
    Try again. This time Safari should perform normally, but your settings and bookmarks will be lost. The default set of bookmarks will be restored. Delete them all.
    If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that may have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
    If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select
    File ▹ Import Bookmarks
    from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
    Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
    If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

  • Web pages are missing their default scrollbars - help

    Web pages are missing their scroll bars.
    To be clear — I can create scroll bars for any element
    within a page — no problem.
    It’s that each pg itself which by default should come with its own scrollbars has none.
    So if a viewer can’t see the entire page the viewer has no means to
    horizontally or vertically scroll to see the off-screen portion of the page.
    I’ve talk to the adobe tech support about the scroll-less pages.
    They said the problem is beyond their expertise and lies in the code itself.
    They advised me to reach across this platform for the answer.
    The problem is consistent on all browsers.
    I ran the pages thru Dreamweaver’s browsers’ lab. Pages varied slightly with each
    Browsers, on the whole looked good. BUT a portion of the image on the right side 
    was cut off and the scrollbars were not available on the Adobe Browsers Test Lab page.
    No errors were found when run thru Dreamweaver’s Browser Compatibility.
    I reviewed the code but I have no idea what I’m looking for.
    See For Yourself, the website with no scrollbars: voicesforthearts.com
    Howard Blume
    [email protected]
    max os x  system10.6.6
    Dreamweaver 5  

    While you are at it Howard, I noticed a METATAG in your BODY section.... it's already in the HEAD section.
      <div id="logonavbar">
        <ul>
          <li><meta name="description" content="" />

  • How do I lock my default language to English for all web pages?

    I have discovered that my language keeps reverting back to French for my web pages. Not for the sites per se, but for anything that I manually enter into a field or form. And since I have my work and home computers set to sync, it keeps reverting back on both systems. It's not necessarily noticeable until I type a word that isn't in the French dictionary, and then everything gets the red underline to indicate the misspelling. I change it *every single day,* but it doesn't stick. Any suggestions?
    For the record... the language does not go to French on my Yahoo Mail, but it does on Facebook and random web pages. I initially thought it was a Facebook problem, but when I tried Chrome, MSIE, and Opera (yes, Opera), there was no French issue, I narrowed it down to Firefox. Sorry.

    You appear to have installed an additional French dictionary that shows as four French dictionaries in the right-click context menu under languages.
    This has nothing to do with installed languages in "Tools > Options > Content > Languages" that are language choices send to the server via the HTTP request headers.
    If you do not want to use those dictionaries then you can uninstall (or disable) the extension that added them.
    *French spelling dictionaries: https://addons.mozilla.org/firefox/addon/dictionnaires-fran%C3%A7ais/
    See:
    *https://support.mozilla.org/kb/Uninstalling+add-ons
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    If you do not keep changes after a restart or otherwise then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

    I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

    Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
    OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
    Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
    sudo atsutil databases -remove
    Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
    This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

  • Creating a Simple Slideshow w music as a movie for a web page.

    Hi all,
    I would like to create a simple slideshow with music saved as a mp4 movie for a web page. I'd like to use basic transitions like crossfades between the pictures and other fun stuff
    A few questions:
    1 - Would I be better of  creating this in iPhoto or iMovie or Keynote?
    2 - Any hints in getting started?
    note: I guess I'll post this on iPhoto area also...

    You are probably better off in iMovie. You will have a lot more control. With iPhoto, as far as I know, all slides would have to be the same length, and you would need to pick music from iPhoto. With iMovie, you can customize slide length, make them change on the beat, use your own music, etc.
    I would use Keynote only if you want to include text and bullets where the photo is only part of the slide.

  • Modify "Publish for Approval" web page?

    Is there a way to modify the "Publish for Approval" web page in Aperture?
    The original package includes a PNG file you can modify to put your logo on, but nothing else.
    Thanks for any input.
    David

    I'm not the developer of this interesting looking package, but it doesn't look like it's something that will work with .Mac at all.
    The web pages is creates rely on an application to be running on the machine that's serving the web page (which, as it's designed, would be your local Mac). This application needs to receive approvals from the web page events, and also needs to be on your machine so that it can use AppleScript to set the metadata in your Aperture library so that the approved pictures show up in the smart group. Neither of these are possible if the site is served on .Mac.
    In theory, this could run on a remote machine, since AppleScript can target processes on remote machines. But to make it work, you'd still need the CGI application on the server, and you'd also need to open your Mac to allow remote AppleScript execution over the Internet (which gets into network setup, probably secure SSH tunnels, etc). Your Mac would also still need to be on, and allowing this connection, otherwise Aperture wouldn't be notified when someone approved pictures.
    To make a short story long, it won't work with .Mac.

  • Since updating to 3.6.22 web pages are very very slow to load and downloads too how can I go back to my healthy computer please?

    Last week I updated to Firefox 3.6.22 (?)and since then a whole host of problems have occurred:
    web pages are taking forever to load
    downloads (like ccleaner and registry booster) wont work
    some programs I've used often aren't working correctly (MS Picture manager)
    I would like to uninstall 3.6.22 and get back to having a healthy computer again.
    Today the web page problem became extreme - pages simply not loading at al and so I have just reloaded 3.6.22 in case something was wrong the first time.
    Suggestions please!
    I'm not that tech savvy and don't know if the installed plugins you've listed below are correct.....
    sue

    Firefox 4.0 was released in March, over 3 months ago. If you have some add-ons that haven't been updated yet for Firefox 4.0, much less for Firefox 5.0, it is time for you to find similar replacements for those add-ons. IMHO, extensions like that should be considered as "abandoned" by their developer.

  • Is there any way to edit the standard Firefox context menu for displayed Web pages?

    Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

    You can remove entries in the context menu with code in the userChrome.css file
    *http://kb.mozillazine.org/userChrome.css
    Some IDs are listed in this MozillaZine Knowledge Base article:
    *http://kb.mozillazine.org/Chrome_element_names_and_IDs
    To find the ID of others you will have to use the DOM Inspector.
    * https://support.mozilla.org/kb/DOM+Inspector
    * https://developer.mozilla.org/En/DOM_Inspector
    * https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
    * DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

  • Creating a movie for a web page and making it continuously loop

    Hi all! I have a client who wants me to create a slide show with 7 images at a specific size for his web page. He wants it to continuously loop. I don't know much about this. Where can I go to learn how? I can make the movie... but I'm not sure what to export it as... and what the settings should be to enable me to make it the correct size and so that it loops. Thank you!
    I'm using iMovie '08 on my iMac.
    PS: When I looked up online for help, all I found was how to make a movie loop on one's computer. Not on web pages.

    .gif files are supported in all browsers and do not need any special "player". They are very limited in their support of colors and most Web pages rarely use them anymore.
    QuickTime .mov files can be set to "loop" (as explained above). Much more colors (millions).
    iMovie is the wrong tool to make your file (and it doesn't create .swf format).
    QuickTime Player Pro is the tool you need. It can import an "image sequence", set the frame rate (up to ten seconds per frame) and save the file in the .mov container.

Maybe you are looking for