Portege 3480: How to reinstall the Windows 2000

I have got the laptops original cds, a new copy of W2000 and i can't get any of them to work. I have used the toshiba exteral cd rom to install the cds and a freecom drive. When i use the tosh external drive it gets as far as looking for my pcmcia card cdrom (the free com and then dies).
My second aproach was just to install 2000 and i got to the page where is asks to recover or install and when you use install it says no hd was found you might need manufature cds, which dont work.
Any ideas on how to get round this problem, i have a copy of 95, 98se and 2000.
Dom

I have tried the diskette and it doesn't seem to work, i get the message remove media and press any key to restart. I have got the windows 2000 installer to work but when it gets to the page that states, press enter to install, r for repair ECT when you press enter is states " You may to power up your harddrive (Done and Checked), You may need your manufacture disks to install (Well the disks i got don't work). It would seem the laptops hard drive was locked by toshiba. Windows 2000 which is already installed on it seems to work fine but has problems with closing down and i can copy paste and even get to the Internet. I have tried all the bootcds and floppys that i own. What drivers do i actually need from toshiba to make an install of windows 2000 on to the computer. There must be a cd/floppy that unlocks the harddrive for os installs.
Dom

Similar Messages

How to reinstall my windows 7 operation system with out the dixk

How to reinstall my windows 7 operations system

You have to boot from the DVD. Put it in the optical drive, then shut down the laptop. Immediately after powering it on tap the Esc key. From the menu tap F9 Boot options. Use the arrow key to move down and highlight/select the CD/DVD drive, the tap Enter.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How do i get Windows 2000 off the VPC 5 disc to install with VP 7

VPC 5 With windows 2000 upgraded to VPC 6 ran great. But hey I thought lets upgrade so I bought VPC 7 Stand-alone, installed XP PRO and it is soooooo
Sloooow. I want to get Windows 2000 off the VPC 5 disc to install on VPC 7 to see if there is a difference. Yeah we got 1.5 gigs of Ram and a Dual processor
Machine. Maybe something else is going on but I cant figure what. So How do I get Windows 2000 off that VPC 5 disc???

Yep tried that. No go but thanks.
Some of the previous versions of the VPC CDs
(unfortunately, I can't remember which) were hybrids
and doubled as not only the VPC for Mac installer CD
but also the Windows OS installer CD. You might try
creating a new virtual PC and then when asked for a
Windows installer disk, insert and capture your VPC 5
disk. I have no idea if this will work for you.
Later versions of VPC came with the Windows OS
pre-installed on VPC disk images and not with a
Windows installer. If your version has a disk image,
copy it from your version 5.0 CD and try opening that
in VPC 7.0. You should see a conversion process.
Hope this helps! bill
1
GHz Powerbook G4 Mac OS X (10.4.4)

Where to download the "Windows 2000 Wireless 802.1X hot fix"?

From the "Cisco Aironet Wireless LAN Client Adapters Configuration Guide for Windows", it indicates that Windows 2000 can support host-based EAP with the "Service Pack 3 or greater and the Windows 2000 Wireless 802.1X hot fix".
However, I cannot find the 802.1x hot fix in Microsoft. Please kindly advise how I can download this hot fix. And, what is the function of this 802.1 hot fix?
Thanks!!!!

Hi!
Here you have the link to the hotfix :
http://www.microsoft.com/downloads/release.asp?ReleaseID=45017&area=search&ordinal=1
Regards
Fredric

By mistake i erase my macbook pro hard disk how to reinstall the yosemite on my macbook because it donsnt read the bootable drive?

by mistake i erase my macbook pro hard disk how to reinstall the yosemite on my macbook because it donsnt read the bootable drive?

usamafrombeverly hills wrote:
when i start the macbook & press cmd+R it goes to the internet recovery
Well then when you erased your hard drive, your erased the Recovery partition, also.
Use Internet Recovery to either restore from your Time Machine backup or reinstall the OS if you don't have a TM Backup.
It will install the OS that shipped on that Mac. You can then upgrade via the App Store.

How to setup the windows installed pxi to RT target

how to setup the windows installed pxi to RT target?

Ranjith,
I think the answer for your 1st que is NO. In the sense, you can run the code, but it may not work precisely as it is supposed to...
A target can be said to be an RT, if & only if it has an RTOS installed in it, not just Windows, which is not a real-time OS.
Youcan run the existing code in Windows, but as I said earlier, it may not give you the actual results.
Finally, hereafter, pl dont use the term 'box' for a PXI. It is a chassis with a main module that runs on Windows or an embedded RT processor/conrtoller that runs on an RTOS like VxWorks or Phsr Lap.
Hope this helps you to some extent...
- Partha
LabVIEW - Wires that catch bugs!

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

How to call the windows popup on SRM portal

Hi ,
how to call the windows popup on SRM portal.
For example when I hit "Check" on the shoppoing cart screen I get a popup saying that "Shopping cart Test has no errors and can be orderd".
I am looking to thorw a popup which has got "yes" and "no" options ( like function module POPUP_TO_CONFIRM in GUI ) and based on the users choice the logic follows through.
Thanks,
krishna.

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

How to locate the window for entry of the redemption code to get serial number for Adobe Pro XI DVD to activate?

How to locate the window on ADOBE's website for entry of the redemption code contained in the pack slip to obtain the product serial number for Adobe Pro XI DVD to be activated after purchasing from a local retail store?

Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

How to Change the Windows Title in EP7.0

Hi
Can anyone provide some pointers on how to change the windows title bar in EP 6.0
We would like to remove the words "SAP Netweaver Portal" from the title.
I have found OSS note 695903 however this refers to EP6.0
Thanks in advance.
Ian

Hi,
For people who have no access to the note, here are the steps involved. The same steps are listed in the note :
1) Logon to your portal with your user who has super_admin role.
2) Go to the System Administration tab -> System Configuration tab.
3) Go to the Service Configuration -> Central Configuration.
4) Change the portal.html.head.title part. Do no forget to save the changes you made.
5) Restart the j2ee server to be able to see the changes on the portal
Cheers,
Sunil

How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.

How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.
<b>Procedure:</b>
Run regedit -
1. Go to HKEY_LOCAL_MACHINE\Software and delete iPlanet folder,
2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services delete the entries for : adminXXX-serv, iAS60, slapd4.1, slapd-servername.
Run regedt32 -
1. Go to HKEY_LOCAL_MACHINE/SYSTEM/ControlSet001/Enum/Root changed the permission for key LEGACY_SLAPD-xxx from security, and delete it, check in other controlSet (002/003) also, including currentControlSet.
If you are cleaning the Registry after an uninstall, than after cleaning
registry delete the iAS home dir and "reboot" the computer.

Sanjeev:
Maybe you can help. I haven't been able to resolve this one "small" problem which is preventing me from rolling out iWS6.0 SP2. I created a new instance of the server using "Add Server" so that I have 2 Web sites (e.g. test1.domain.com and test2.domain.com), but the 2nd server instance is pointing to the same HTML location as the first (i.e. http://test2.domain.com takes you to the same location as http://test1.domain.com). What do I need to change and where to fix this? Need a VERY quick answer to this to implement a production Web server. I've tried the suggestions made so far (see: http://softwareforum.sun.com/servlet/ProcessRequest?RHIVEID=181&RPAGEID=135&HOID=50B500000008000000966A0000&UCATEGORY_0=_23_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=server+instances&USEARCHCONTEXT_QUESTION_S=0) but nothing has resolved this problem. If you have any ideas at all, I'd appreciate if you could let me know :)
Thanks!

HOW to reset the windows system on my macbook?

I WANNA TO KNOW HOW TO RESET THE WINDOWS SYSTEM ON MY MACBOOK.
IT'S DUAL SYSTEM. WINDOWS AND MAC.
MUST I HAVE TO UNINSTALL THE WINDOWS SYSTEM FIRST.THEN RESET?
BUT HOW TO UNINSTALL IT?
BY USING THE INSTALL DVD OR ANYTHING ELSE?
HAVE I NEED TO BACKUP FIRST?
AND HOW TO BACKUP THE FILES IN THE WINDOWS?

While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/windows_software/boot_camp

Come reinstallare l'appstore in un mac os x 10.5.8. ? how to reinstall the appstore in a mac os x 10.5.8. ?

come reinstallare l'appstore in un mac os x 10.5.8. ?
how to reinstall the appstore in a mac os x 10.5.8. ?

Follow these details to upgrade as suggested in my post above.
First, check that your machine is suitable for Snow Leopard.   It needs to be a Mac computer with an Intel Core 2 Duo processor.   Double check by reading the specs.
            Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
This is a paid upgrade not a download. To buy the DVD, if you are from the USA go to …
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.
In Europe or otherwise substitute your national code in place of /us above.
In the UK see … Mac OS X 10.6 Snow Leopard - Apple Store (UK)
Before you start upgrading, back up your files.   If you are unsure how best to do this, the following link is hugely informative.   Most commonly used backup methods: Apple Support Communities

TS1538 hi guys!merry christmas! i hope you can help me how to reinstali the apple mobile device in my computer..

hi guys!merry christmas! i hope you can help me how to reinstali the apple mobile device in my computer..

Type "Apple mobile device service" into the search bar at the top of this page by Support and read the resulting help articles.

How to change the Window Title on a per build spec basis?

I would like to be able to make 4 "build specificiations" against the same Startup-VI and be able to have the Window Title different in each of the output executables. I know how to change the Window Title for the VI itself, but for some reason, I don't see the ability to override this information in Source File Settings --> Customize VI Properties dialog of the build specification. Is there perhaps a way to do this programattically with VI server? Perhaps there is a way I can define a unique symbol on each of the build specs and then do a case statement in code to determine which title to display based on the symbol that was defined?
Thanks,

You can use the appropriately named Window Title property. In your project you can define conditional disable symbols (right-click on the project node and select Properties) and then use a conditional disable structure in your code. However, these symbols apply to the entire project, not to a specific executable. Thus, a better route would be to use the executable name (also accessible via a property), if possible, or some other distinction between the executables. What makes the executables different?

Portege 3480: How to reinstall the Windows 2000

Similar Messages

Maybe you are looking for