Portege R500 - Toshiba Flashcard has stopped working

Hi,
I keep getting this "Toshiba Flashcard has stopped working and will closed down" error when I start up my Portege R500 laptop.
What is causing this?
I'm running in Vista and my PC continues to work even though it does this.
Cheers,
Elty

Hi
Its not easy to say what causes this issue.
In most cases some other software parts could affect the functionality of different applications.
For example my flash card stopped working after Vista has ran some updates.
I have simply removed the old VAP (value added package) from the system.
I cleaned registry and system using the CCleaner (free tool) and then reinstalled the VAP again.
Now everything is running properly.
I think you should try the same too.
Remove the VAP and install the new VAP downloaded from the Toshiba European driver page.
Check it out!

Similar Messages

  • Portege R500 - fingerprint utility has stopped working

    I have a Portege R500 laptop. The fingerprint utility has stopped working. First (perhaps after an update of the True Suite Acess Manager was installed a few months ago) it failed to work on login but did work for other passwords.
    Now it doesn't work at all. If I try to register fingerprints it tells me that it has failed to locate the sensor. I have reinstalled the AES1610 driver and the TrueSuite access manager, but it makes no difference.
    In Device Manager it says that the device is working. I have looked at various threads on this without seeing anything that works.

    Hmm Maybe you should try to clean the registry after the fingerprint software has been uninstalled.
    In your case I would follow this:
    - uninstall the fingerprint software and delete the fingerprint device from the device manager.
    - reboot the notebook
    - clean the registry using the free tool called CCleaner
    - reboot once again and install the software and driver
    - reboot once again and test the fingerprint functionality
    Greets

  • Toshiba Tempro has stopped working

    Hi
    I purchased a Tosh Netbook NB-300 108 a couple of weeks ago. For the last few days I get an error messsage when starting up "Toshiba TEMPRO has stopped working", this also happens if I try to start Toshiba bulletin board from the icon.
    I have just downloaded Tempro and reinstalled it but the problem is still there.
    Can anyone help please?
    PS - Win 7 starter operating system

    Hi noakes,
    Im wondering that the other Toshiba tools give you the same error message
    Maybe something has muddled up the registry or a virus deleted some important files they are necessary to run the programs. Who knows?!
    In your case I would recommend reinstalling Windows if no program works. Therefore you can choose the HDD recovery to reinstall the OS.
    Check this!!!

  • Portege R500 - ctrl keys have stopped working

    Hi,
    Both control keys have stopped working on my laptop. The fact that it is both of them suggests that it is not anything physically wrong with the key. I can't do any ctrl+letter e.g. copy, paste, select all, or even ctrl+alt+del
    Can anyone suggest how to get these keys back?
    Many thanks
    Angus

    Hi
    Any key combination which would disable the CTRL buttons is not known to me.
    But I recommend checking the common keyboard options like FN+F10, FN+F11, FN+F12, Capslock, etc
    Furthermore you could test the notebook with an external USB keyboard.
    If the CTRL buttons would work using external keyboard, then this issue would be related to hardware problem.
    Greets

  • Re: Portege R600-10Q- Toshiba DVD Player has stop working

    Hello,
    Please help me,
    I can't use the Toshiba DVD Player, every time I open it, appears the windows windows saying that the app has stop working...
    When I see the error report, appears 'app crash'....
    I've already gone to the Toshiba site to make the bios upgrade and have made the download of a new version Toshiba DVD player and the problem remains the same...
    What can I do?
    Thansk and Best Regards,
    Hugo Cunha

    Try removing the CD/DVD Filters from the Registry.
    When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
    1) Run Regedit (Start -> Run -> Regedit)
    2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
    4) Reboot.
    If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
    This utility can remove the filters for you:
    http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe
    Failing that, I would backup the data and run recovery.

  • I tunes has stopped working in windows 7 and I don't know how to get the crash information that everyone else seems to get to know what the cause is....any help?  I have a toshiba windows 7 computer.

    I have a toshiba computer and it is windows 7, recently after I installed imatch everytime I open itunes I get the message 'i tunes has stopped working' and windows cannot find a solution and has to close.  There is no solution and I don't know how to get the crash information on my computer....can anyone help as I want to finish downloading all my songs to match to be available on my mac products.

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

  • What can I do about this message -"Toshiba DVD Player has stopped working"

    Hi
    My DVD Player used to work fine . . . and then I installed iTunes.
    It then worked for a while, but only by using 'Run as Administrator'.
    After a couple of weeks I started to get the message "Toshiba DVD Player has stopped working".
    I have uninstalled iTunes - and uninstalled and then re-installed the DVD Player - but it still will not work!!
    Any solutions please?
    Thanks in advance for your help.
    Ms Q_reeus

    My solution to this is to remove Toshiba DVD player and install VLC player. You can get it for free.
    It can read all video formats and you don't need some additional codecs.

  • Toshiba Disc Creator Has Stopped Working Error Message

    I have a Toshiba Satellite P305D-S8834, and tried to burn a CD using Toshiba Disc Creator v.2.0.1.3. But I kept getting an error message saying "Toshiba Disc Creator has stopped working." and couldn't successfully burn a CD. Though I contacted Toshiba tech support, I couldn't get useful info. Any tips would be appreciated.

    Try removing and reinstalling Disc Creator. Install the latest version from the Toshiba site.
    Also update the BIOS, and ensure you are using quality DVD discs such as TDK. No-name discs wear out easy and use cheap dye's.
    Also try deleting the UpperFilters and LowerFilters:
    http://support.microsoft.com/default.aspx?id=314060

  • Toshiba notebook registration reminder has stopped working

    Hi
    everytime I open my laptop it shows "Toshiba notebook registration reminder has stopped working"
    How can I fix that?

    Hello
    Do you need the registration reminder? I dont think so if you have already registered your notebook
    Easiest way is you disable the program from start up Navigate to start > run > msconfig and select start up tab. Then search for registration reminder and uncheck the box.
    Afte restarting the computer it shouldnt appear anymore. Can you confirm this?

  • Re: Pressing FN+F5 message: IGFXEXT module has stopped working

    When i press Fn F5 i get the message IGFXEXT module has stopped working and i cannot change my monitor configuration. I briefly see the icons but when i cancel the error message they disappear.
    I have downloaded and install ed the 09/10/08 Intel Driver from the Toshiba download.
    What is the problem and how can i fix it. It has been present since i bought the machine.

    Hello
    The fact is that all drivers, tools and utilities must be installed in the right and defined order. Toshiba people do exactly the same and later made recovery image. For your own installation the principle is the same. All offered stuff on Toshiba support and download page should be installed following Installations Instructions document.
    Unfortunately this document is not available for this Portege. So, try please to install and configure Vista following this installations order:
    Windows Vista SP1
    Intel(R) Chipset Module V8.3.0.1014
    Intel(R) Robson(Intel iMSM Driver) V1.5.0.1013
    Intel(R) Crestline-GM / UMA Driver V7.14.10.1329
    or
    AMD M82XT /M86 Driver V8.452.2
    Conexant CX20561 Audio Driver V4.36.6.0
    Marvell 8040/8055 LAN Driver V10.51.4.3
    Synaptics Touch Pad Driver V10.1.7.0
    Alps Touch Pad Driver V7.0.302.8.1
    Modem Driver V7.70.00.00
    Netwaiting V2.5.52
    Intel Golan/Kedron Wireless LAN Driver V11.5.0.32 or
    Atheros Wireless LAN Driver V7.4.2.40.32.1
    Realtek RTL8187B Wireless LAN Driver V6.1116.1226.2007
    Chicony Camera Software V6.2.238.1217
    Bluetooth Stack for Windows by Toshiba V6.10.02T
    CIR Port Driver V7.1.62.2012
    TOSHIBA Value Added Package V1.1.14
    TOSHIBA Hardware Setup Utility V3.0.1.0
    TOSHIBA Supervisor Password V3.0.1.0
    TOSHIBA SD Memory Utilities V1.8.1.1
    Authentec AES1610 Fingerprint Utility V7.9.0.4(20080202)
    TOSHIBA ConfigFree V7.1.26
    TOSHIBA WPS Library V1.003
    TOSHIBA Assist V2.01.05
    TOSHIBA Speech System V1.00.2514
    TOSHIBA Extended Tiles for Windows Mobility Center V1.01
    TOSHIBA Remote Control Manager V2.3.0.8
    CD/DVD Drive Acoustic Silencer V2.02.00
    Toshiba HDD Protection V2.0.2.3
    TOSHIBA Face Recognition V1.0.3.32
    TOSHIBA TRS Driver V4.0.2007.1115
    I hope this will help you.

  • Pressing FN+F5 message: IGFXEXT module has stopped working

    Pressing FN+F5 message: IGFXEXT module has stopped working
    I am using Vista
    Model - Portege M700

    With FN+F5 you can switch between the monitors.
    The igfxext.ext belongs to the Intel common user interface and its stored in the path %system%\igfxext.exe.
    So in your case I would try to update the display driver. I think this causes the error.
    You can find it on the Toshiba website:
    http://eu.computers.toshiba-europe.com

  • Merge to HDR Pro from LR5. After applying preset and during conversion of file, Iget an error message "Adobe Photoshop CC 2014 has stopped working" and closing PS

    In LR5 i do: Merge to HDR Pro. After I apply my preset and PS attempts to convert HDR file, I get an error message from PS: "Adobe Photoshop CC 2014 has stopped working". Then PS Closes.
    My source files are 5 NEF files of 28 MB. I select 16-bit, I also tried 8-bit. No difference. Same error message.
    I have a Toshiba Quosmio X870 with Intel i7 3610QM @ 2,30 GHz, 16 GB RAM, Windows 7x64 HP SP 1, 7,3 Performance Index
    Any suggestions?

    As the crash report says - your outdated video card driver is crashing. You need to update your video card driver from the GPU maker's website (AMD/ATI in this case).

  • Adobe bridge has stopped working windows 8

    I recently installed adobe bridge cs6 on a windows 8 computer and when the program launches and i browse to a folder with images I see "adobe bridge has stopped working" and the program crashes. Any Idea what I can do to solve this?

    I am having this same problem, but I am using windows 8.1  (64 bit) -  Toshiba Click 2 pro, 1920 x 1080 resolution.
    I just installed Design Standard CS6, everything said these would be compatible,
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.html
    https://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaul tFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=adobe%2Bdesign%2B standard%2Bcs6&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance& Compatibility=Unknown&LastRequested=14
    but I"m having problems with Bridge CS6, Acrobat X, Photoshop CS6 64-bit and Illustrator 64-bit.
    What to do?!

  • Backlit Keyboard has stopped working on Satellite P50-A-12Z

    I bought my Satellite P50-A-12Z over a year ago, and since few weeks the backlit keyboard has stopped working.
    I used to hold FN+W to turn on/off the light keyboard, but now it doesn't work anymore and I have the message "chronometer" on the top right of the screen as you can see on this screenshot:
    https://imagizer.imageshack.us/v2/1050x591q90/903/Estd0f.png
    When I go to Desktop Assist > Tools & Utilities > Function Key , keyboard backlight is set to OFF but can't set it to ON:
    https://imagizer.imageshack.us/v2/1050x591q90/745/gMqGvq.png
    Please help me

    Hi
    I don't know if this will help but try please following: perform complete shutdown - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Start notebook again and press F12. There you should find option to enter BIOS settings. Enter BIOS settings and try to enable keyboard backlight there.
    Please test it and send some feedback.

  • Satellite A60-652: ati2dvag driver has stopped working

    Hello,
    Recently I have some problems with my graphics. My satellite freezes up, and goes to a low resolution with a few colours. A message says the ati2dvag driver has stopped working. After rebooting the satellite shows a blue screen and reboots...same thing happens. Only shutting down and retrying after a few minutes gets me back to normal Windows.
    I tried to look for some new drivers, but I can't indicate my model (SA60-652)... is this model too old for updates???
    Toshiba SA60-652
    ATI MOBILITY RADION 7000 IGP
    ati2dvag driver (6.14.10.6430)
    Windows XP (SP2)
    AVG virus scan
    Hitman Pro anti-spyware
    ATI hydravision installed but never used :-/
    Notebook recently has been rising in temperature...I will deal with this after my final thesis (8 may)
    Please can you help me?
    If you can, please be clear in instructions, 'caus I don't know a lot about computers... (PEBCAC)
    Thanks!

    Thank you for this answer,
    I found the driver myself, uninstalled the old one and installed the new one (same driver, so actually just a reinstallation).
    I use the programm Speedfan to monitor my cpu-temp, and I noticed a few months ago that temperature stayed between 60 and 70 degrees. Now my laptop is easily rising to temperatures of about 87 degrees. Think this is the answer... The notebook even completely stopped working suddenly a few weeks ago, due to high temp. I will look into it to clean the fans and stuff. Guess I'll find some more info on that on other forumthreads.
    Thank you for your help
    Jeroen

Maybe you are looking for