Portege Z930 - Display Driver doesn't work correctly

Hello,
we have a Portege Z930 with Windows 7 64 bit in use where the Intel Display Driver seem to work incorrectly.
First problem is the slow presentation on display - if we open a picture (simple JPG) and move the window, the window frame will break during the move and be shown very bizarre.
Next we installed a dynadock U3.0 docking station for using two external displays additionally. This works even worse. For the docking station we used the driver from the CD included on delivery, and we connect it over an USB 3.0 slot.
On booting switching onto the 2 displays instead of the internal notebook display doesn't work - so we use the workaround of using an extended desktop over all 3 displays (2 externals and the internal notebook display as third).
In Internet Explorer we had to switch off GPU Rendering and use Software Rendering instead because otherwise we observed critical misfunctions on the external displays (having 2 windows open the display froze or couldn't show moving windows). Nevertheless the display is not satisfactioning.
We already tried 3 different versions of the recommendet Intel Driver which is also offered by Toshiba for download; we loaded it there and also 2 more versions (one newer, one older) from Intel directly.
So how can we get that working correctly?
Thanks in advance and regards,
N. Cochems

Most importantly. make sure you have Win7 Service Pack 1 installed. New notebooks have problems running in win7 RTM (no service packs).
Sounds like Windows is using the standard VGA driver instead of the Intel driver. Uninstall all the display drivers from Control Panel->Programs and Features then go to the Toshiba website and install the Intel Chipset Utility then the Intel Display Driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new DisplayLink v7.xx driver fixes many problems found in the v6.xx drivers.
Double check that the Intel drivers are installed correctly in Device Manager.

Similar Messages

Display driver doesn't work after Win 8.1 upgrade

I have just upgraded my laptop's operating system from Win 7 Premium to Win 8.1 Enterprise.
After the upgrade, my display driver Intel HD graphics 3000 seemed to have stopped working. PC had got stuck on 1024 x 768 resolution.
I tried downloading Intel HD graphics 3000 from HP support "hp.com/in", but it was only compatible for Win 7 x86 and x64. Then searched on Intel website "downloadcenter.intel.com", I could see Intel graphic driver only for 2nd generation cores(i3, i5, i7), unfortnately mine was a first gen core i5 (i5-2430M). I also downloaded Intel(R) driver update utility 2.0 which is a auto drivers detect tool from Intel. It searched for missing display drivers, downloaded and installed, but still it is not a perfect match for my system.
I have been missing my laptop's high resolution quality for the past few days and its like going through hell. Any help from you ladies and gentlemen of HP or any computer experts will be much appreciated. Thank You.
I will provide my laptop specs below:
Product name: HP Pavilion dv6-6154TX
Processor: Intel(R) Core(TM) i5-2430M CPU @2.40 GHz 2.40 GHz
Max screen resolution: 1366 x 768
Operating system: Windows 8.1 Enterprise 32 bit
System type: 32 bit operating system, x64 based processor
Display drivers: Intel(R) HD graphics 3000, AMD Radeon HD 7400M series.
Direct X version : DX 11
I am not sure whether, I have provided all the info necessary for you guys to assess. But i can put on any more info if you need.
Once again, I thank you very much for your time in reading and the help you would provide.
~Dinesh

Hi @dinesh_kumar ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6154tx Entertainment Notebook and downloading Windows 8.1 Enterprise. This is not compatible with Windows 7 Home Premium with 64 Bit. Here is a link to the Windows 8.1 upgrade assistant.
Here is a link to system requirements from Windows for Windows 8.1 Enterprise.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

X60 display driver doesn't work!

Info: I reformatted my hard drive, and I'm trying to install all the drivers I need. I'm using Windows XP Pro.
Problem: The video driver on the drivers website for X60 does not work
Error Message: When I click on setup.exe, I receive the following error message: "This computer does not meet the minimum requirements for installing this software. Setup will exit."
Questions:
1. What video driver do I have anyway? How do I check?
2. Where can I download the driver for my video driver?
(3. Why doesn't the video driver on the website work?)
Thanks in advance for any help.

Please do the following...
Start > Control Panel > System
Go to the "Hardware" tab
Click on "Device Manager"
Double-click on the graphics device
Go to the "Details" tab
From the drop-down box select "Hardware Ids"
Post the Hardware ID as shown there
For example, on my T61 with Intel x3100 graphics, the device is shown as follows...
PCI\VEN_8086&DEV_2A02&SUBSYS_20B517AA&REV_0C
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.

Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken.
The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
This implies your site is not properly defined in DW. Go to Site > Manage Sites.
Or simply go to your other installation of DW and export the site definition file from Manage Sites.
Save it to a flash stick or other removable drive. Then import the STE file into your 2nd installation of DW.
Nancy O.

Ever seen the error "ialmrnt5 display driver has stopped working normally"?

Have a user who hasn't used E-test in about a year. He has version 8.01.0249 with IE 7.0 and is getting an error running a script: "Windows display driver stopped responding. The ialmrnt5 display driver has stopped working normally . . . .".
On a different machine with E-test 7.0 with IE 7.0, the same script works fine.
Should I have him upgrade to version 8.20.0526? Also, assuming I upgrade his version, why does the same script work with E-test 7.0?
THANKS!

Hi,
It would be better to upgrade to version 8.20.0526. Prior to eTest Suite 8.20.x there was no support for IE 7. There were some cases where eTest Suite would work with IE 7, but it was not consistent since the product did not has IE 7 contemplated in the design. That can explain why it works with e-Test Suite 7.0.
Additionally in 8.20.526 there are several additional features that makes the tasks easier, and there are several bug corrections that can save you time when troubleshooting scripts.
If you are planning to use eTester for Load testing scripts I would recommend moving to 8.20.0569, which has additional bug fixes that can save you a call to support.
You may want to contact your Empirix Sales Rep in order to know if your license would work with the latest version of e-Test Suite or just install it and try the license.
Once you install e-Test Suite 8.20 make a quick test to see if it works with your web application, then, consider the alternative of upgrading all the other computers that will have eTest Suite. It's better to work in a consistent environment where everybody has the same version because you will ensure compatibility of scripts and configuration settings, it will be easier to maintain your environment, and it will be easier to troubleshoot computer problems since you should all have the same configuration.
e-Test Suite 7.0 may not be supported since it's older than two releases than the current one, even if the script work with e-Test Suite 7.0 I would look for the upgrade.
Regards,
Zuriel

Ipone 4s display suddenly doesn't work any more. i can't even unlock it as it put the numbers itself. and if i am lucky to unlock it opens apps and does everything whenever my finger comes near without even touching it. can anyone help?

ipone 4s display suddenly doesn't work any more. most of the time i can't even unlock my iphone as it puts the numbers itself. and if i am lucky to unlock it opens apps and does everything else whenever my finger comes near the display without even touching it. I did reset and also updated my operating system. But the problem stills shows up... can anyone help please?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Satellite P300: Display Driver has stopped working using external monitor

I have a number of these Satellite P300 PSPCCA-OC201Y and recently bought external monitors for them.
Since then we seem to be getting "Display Driver has stopped working and has recovered" messages, then after about 5 of these, it crashes.
Starting with one machine, I have updated display drivers, bios was current, all to no avail.
I then did a complete system restore back to original. Has not solved the problem.
Any ideas?

hi Keven Dickenson,
as you said you restored the system and still there is no way to get things work it may be a hardware issue...
i my opinion you should consult a servicepartner to check this out...
is there any of the machines working with the external monitor at all?
if none of them is able to connect to ext. display maybe your installation has a problem or the monitor is faulty...
try it with another monitor and recover one system to factory installation....

Game Center doesn't work correctly

Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
I've restored my device several times, but it didn't help.
How to solve it?

I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
Other than waiting for Apple to fix it I don't think there is a solution.

I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion

I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion was installed via App Store anyway.
So here's what I done so far:
tried resetting PRAM - No success
Done disk utility. Disk verified with no errors. I even re formatted disk. - no success starting.
Tried re installing mountain lion via download . It froze halfway installing -no success.
Tried backing up a time machine backup from my USB hard drive. It froze at 1% - no success
Tried booting from safe mode - no success
Tried the command line boot - no success.
Please someone help!

Sounds like the hard dre has left the building, Died, in the Sh*tter, Gone to the hard drive resting place in the sky.
Buy a new drive connect it to the system with a SATA to USB adapter and see if you can install Mt Lion on that drive connected externally. If you can then the drive inside your system has failed.
Oh Wait!!!! You have the 2009 model. They are known for bad drive to logic board cables. So it may not be the drive itself but the cable going from the drive to the logic board. Do the same as above then if the system runs OK with the new drive connected externally install it in the system and see if it boots. If it does you are good to go. If it doesn't then it is more then likely the cable that hs failed.
I would suggest you also SAVE a copy of that download of Mt Lion and create a USB install drive from it using Lion Disk Maker, once you get your system up and running.

HT4718 optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro

Hi there,
my questions are:
1.optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro.
how to do it on internet?
2.already tried connected via lan cable, but folder with question mark appeared.What could be problem(DHCP was enabled)
3.Is it possible to do it in target disk mode through my even older powerbook G4
4. Is it possible to do it with flash memory , and how to download the stuff on?
thanks in advance
Allterro

If your Macbook Pro (MBP) came preinstalled with OS X Lion (10.7), you can use Internet Recovery to reinstall it.
You will need an Internet connection.
Restart your Mac using Command+Option+R until you see a spinning globe. This will boot into Apple's server and load their Recovery HD.
From the OS X Utilities menu, select Reinstall OS X. You should see a Lion logo to the left of this option.
If your MBP came preinstalled with OS X Snow Leopard you will need the DVD and an external CD/DVD drive to use to install it.
You may also be able to put your MBP into Target Mode with another Mac running a version of OS X that is compatible with your MBP. From that other Mac download OS X from the App Store and point to your MBP (Target Mode) to install to. I've never tried this but it sounds like it might work.

AddChild doesn't work correctly in 11.9

comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows 7 IE debug version and I see no script errors
Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
(Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)

Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the bug URL and I'll investigate internally.

IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords

iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz

It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
report to Apple - iPhoto menu ==> provide iPhoto feedback
LN

After upgrade my iphone 4 to IOS6, sound doesn't work correctly

After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

Portege Z930 - Display Driver doesn't work correctly

Similar Messages

Maybe you are looking for