Positional parameter

When I run my form and after starting the JAVA Applet I get this Error message
FRM-90928 Positional parameter after key in command line. What does that mean?

My bet is that your fmx is located in a directory with space in its name like "my document". Try saving the fmb and fmx in c:\
and see if it still happens.
If you still have problems please post the URL that is invoked to run your form.

Similar Messages

UTL MAIL a positional parameter association may not follow a named associat

I am trying to sale 2 emails, I got the code like this
{code|
utl_mail.send(sender => '[email protected]',
recipients => '[email protected]','[email protected]',
subject => 'Banner Duplicate Report '||trunc(sysdate)||' Process for Managing Known Duplicate Reports',
message => 'You are about to receive a report with possible duplicates in the Database, THIS IS A TEST' ||chr(10)||chr(13)||
I am getting this error...
PLS-00312 a positional parameter association may not follow a named association....
I try to separate the email by ; does not work either...
Thank you
Ps I changed the real emails by xxxx

842471 wrote:
I am getting this error...
PLS-00312 a positional parameter association may not follow a named association.... The reason for the error. You are writing this:
utl_mail.send(
sender     => '[email protected]',
recipients => '[email protected]',
'[email protected]',
   subject    => 'Banner Duplicate Report '||trunc(sysdate)||' Process for Managing Known Duplicate Reports',
..etc..
);The compiler/parser sees that you are specifying the parameter name followed by the value. So:
This is fine:
sender     => '[email protected]',
So is this:
recipients => '[email protected]',
But what is this? Parameters are separated with commas. Where is the parameter name?
+'[email protected]',+
PL/SQL can either support the call where you do not specify the parameter name. For example: (using positional parameters)
DBMS_OUTPUT.put_line( 'hello world' );
Or support where you do specify the parameter names. For example: (using named parameters)
DBMS_OUTPUT.put_line( a => 'hello world' );
But you cannot mix these two methods as you have done. Thus the error message stating exactly this.
The recipients parameter is scalar value. It expects a single string value. Not multiples values.
The string itself can contain a comma delimited list of recipients. E.g.
recipients => '[email protected],[email protected],[email protected]',

Frm-90928 positional parameter after key on command line

frm-90928 positional parameter after key on command line
I have an error while i run form module. i am using database 9i with 9iDS. Plz help me to resolve this issue.

Exactly Francois, 100% true.
I've noticed that the Forms Builder tries to run the unsaved forms from the user's default home (root) directory, which almost always in windows environment has spaces in it, like "Documents and Settings\...".
Tony

Positional parameter passing For OAS 4.0.8.2

Have The OAS 4.0.8.2 support Positional parameter passing ?
I try it, but error!

Its a tically error of not enough memory.
How many Mb of Ram and swap have you configured.
Best regards, Marcelo.
PD: With this combination I recomend 256Mb of ram plus 512mb of swap.

Positional Parameter error

Hi everyone,
While running simple (dept form) under scott schema I received positional parameter error message after running this form.
How would I avoid Jinitiator before running the forms 9? Because when I click ok It opens athe application Server then run the form. I can't want to open application server for running this simple form.
Forms Version is 9.
What setting I do in order to run the dept form successfully on version forms 9.
Mentor

Hello Francois,
I don't want to sound skeptic, but wasn't that a bug in release 9.0.2.9?
I tried in 10g R2 and it does run even if the path has a space in it. I tested in C:\test forms my Oracle home is under D:\Devsuite10g. I ran it from the builder.
If it's the same bug than it has some weird behavior :o)
Anyway You are 100% right, the invention of spaces in a directory name it's hmmmm not so right :o)
Regards.
Tony

Exchange 2010 - New-Mailbox - A positional parameter cannot be found that accepts argument '-PrimarySmtpAddress'.

Hi,
I am currently writing a powershell script that utilizes the new-mailbox command of EMS to create a shared mailbox.
I am connecting to EMS via a remote PSSession object.
When I try and specify an alternative SMTP address via the -PrimarySmtpAddress paramater I get the error
" A positional parameter cannot be found that accepts argument '-PrimarySmtpAddress'.
I have confirmed that the version of Exchange 2010 installed on the server should have this parameter - Version 14.3 (Build 123.4)
An example command :-
New-Mailbox -Shared -Name "SharedMailbox_test" -Alias "testsharedmailbox" -DisplayName "SharedMailbox_test" -UserPrincipalName "[email protected]" -OrganizationalUnit "OU=Mailboxes,OU=Accounts,DC=domain,DC=com"
-Database "DB1" -PrimarySmtpAddress "[email protected]" -force
Has anyone else experienced this behavior?
Steve.
Just a good old boy, never meaning no harm

Hi Rich,
That was my initial thought too, so I triple-checked my command to see if it was a simple syntax error - it wasn't.
On further investigation I compared the list of parameters available in a DEV EMS session (on where I know the command works) against the one in PROD where the problem occurs. Both sessions are running the same version of EMS.
I ran the following to get a list of parameter names in both sessions :-
$a = gcm New-Mailbox
$a.Parameters.Keys | sort
Here's the results :-
DEV EMS (working)
Prod EMS (missing)
AccountDisabled
ActiveSyncMailboxPolicy
AddressBookPolicy
Alias
Alias
Arbitration
ArbitrationMailbox
Archive
ArchiveDatabase
ArchiveDomain
AsJob
AsJob
Confirm
Confirm
Database
Database
Debug
Debug
Discovery
DisplayName
DisplayName
DomainController
DomainController
Equipment
Equipment
ErrorAction
ErrorAction
ErrorVariable
ErrorVariable
FirstName
FirstName
Force
Force
ImmutableId
Initials
Initials
LastName
LastName
LinkedCredential
LinkedDomainController
LinkedMasterAccount
ManagedFolderMailboxPolicy
ManagedFolderMailboxPolicyAllowed
ModeratedBy
ModerationEnabled
Name
Name
Office
OrganizationalUnit
OrganizationalUnit
OutBuffer
OutBuffer
OutVariable
OutVariable
Password
Phone
PrimarySmtpAddress
RemoteArchive
RemotePowerShellEnabled
ResetPasswordOnNextLogon
ResetPasswordOnNextLogon
ResourceCapacity
RetentionPolicy
RoleAssignmentPolicy
Room
Room
SamAccountName
SamAccountName
SendModerationNotifications
Shared
Shared
SharingPolicy
ThrottlingPolicy
UserPrincipalName
UserPrincipalName
Verbose
Verbose
WarningAction
WarningAction
WarningVariable
WarningVariable
WhatIf
WhatIf
It might be a permissions-based issue, but I don't own either EMS session so can't test personally.
I will keep investigating and update here once I have some further information.
Regards,
Steve.
Just a good old boy, never meaning no harm

Positional parameter for -asjob

$asjob = $true
if ($asjob){$asjobcommand = "-asjob"}else{$asjobcommand = ""}
$asjobcommand
$computername = "abc"
Invoke-command -computername $computername $asjobcommand -scriptblock{write-host "code"}
Invoke-Command : A positional parameter cannot be found that accepts argument '-asjob'.
At line:8 char:1
+ Invoke-command -computername $computername "$asjobcommand" -scriptblock{write-ho ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [Invoke-Command], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.PowerShell.Commands.InvokeCommandCommand
Can anyone point me into the right direction on this one? I understand why its happening i just don't know how to fix it.

A: Positional parameter for -asjob

Figured it out after i released you do do -asjob:$true -asjob:$false
$asjob = $true
if ($asjob){$asjobcommand = $true}else{$asjobcommand = $false}
$asjobcommand
$computername = "abc"
Invoke-Command -computername $computername -scriptblock{write-host "code"} -asjob:$asjobcommand

Powershell date range positional parameter error

I am trying to export emails sent to a particular email address in a specific date range. I can run the command and it works fine without the date range, but when I try to include it it errors out. Any help appreciated.
Working command without date range:
Get-Mailbox -ResultSize Unlimited | Search-Mailbox -SearchQuery “To:’[email protected]’” -TargetMailbox "SearchResults" -TargetFolder Export
And repeat it using “From” instead of “To”
When I try to add a date range though like this:
Get-Mailbox -ResultSize Unlimited | Search-Mailbox -SearchQuery “To:’[email protected]’” -ContentFilter {(Received -gt '08/15/2014') -and (Received -lt '02/18/2015')} -TargetMailbox "SearchResults" -TargetFolder Export
I get the below error listing:
A positional parameter cannot be found that accepts argument '(Received -gt '08/15/2014') -and (Received -lt '02/18/201
5')'.
    + CategoryInfo          : InvalidArgument: (:) [Search-Mailbox], ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Search-Mailbox
Invoke-Command : Cannot write input as there are no more running pipelines
At C:\Users\exservice\AppData\Roaming\Microsoft\Exchange\RemotePowerShell\kc-exchange.us.org\kc-exchange.us.org.p
sm1:43760 char:29
+             $scriptCmd = { & <<<< $script:InvokeCommand `
    + CategoryInfo          : InvalidOperation: (:) [Invoke-Command], PSInvalidOperationException
    + FullyQualifiedErrorId : NoMoreInputWrite,Microsoft.PowerShell.Commands.InvokeCommandCommand

Get-Mailbox -ResultSize Unlimited |
Search-Mailbox -SearchQuery "Received:> $('2014-08-15') AND Received:< $('2015-02-18') AND To:'[email protected]'" -TargetMailbox "SearchResults" -TargetFolder Export

Restore-SPSite : A positional parameter cannot be found that accepts argument '$null'.

Restore-SPSite : A positional parameter cannot be found that accepts argument '$null'.
At line:1 char:15
+ Restore-SPSite <<<< http://weekly-sn-cas.statoil.com/sites/ts-17067/ -Path C:\backup\ts-47438(1).bak
+ CategoryInfo : InvalidArgument: (:) [Restore-SPSite], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.SharePoint.PowerShell.SPCmdletRestoreSite
plz give me solution above this
ravi sharepoint

Hello,
can you provide the command you execute?
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Motion path changes gets larger when copied to Shape Position parameter

Hello There,
Richard Gerard has been helpful, and well as other people.
I have sorta figured out how get a stroke to follow a motion path.
I (so far) am unable to get a shape to follow the same motion path.
My shape is a small ellipse commonly known as a circle!
I have seen this post - http://forums.creativecow.net/thread/2/959085, which is interesting,
but does not work. My shape layer consists of name, "Blue Circle", and two properties below that:
Contents and Transform. If i copy the path into the Transform-Position property the path is about 2
times bigger than the path I want to use, and does not start at the correct spot.
After reviewing the post above - I added a "path" to the ellipse in the "Contents" area, I can see the path, it is the correct size,
but the circle does not follow this path. If I try to copy this path to one of the position properties, no dice,
the path completely displaces the shape to the wrong coordinates.
I must be missing something basic here, but have yet to find out.
Any tips will help.
Thanks,
eholz1

The position path is offset because your Black Solid with the mask isn't in the default position. Both Anchor Point and Position must be reset. Parenting can also foul this up. Here's how to fix it.
First of all, before you copy and paste the path remove parenting and return the solid with the mask to it's default position by resetting Anchoe Point and Position. Now when you paste the path to your Blue Ball it will exactly match the path on the solid layer. Once the path is set you can redo the parenting and reposition the layers but you must include the blue ball. If it were me I'd create a null and make that the parent of the Black Solid, the Blue Ball, and the Map. Now you can animate the position of the null to scroll across the map and the blue ball will follow.
To match the timing of the stroke to the blue ball you simply drag out the right most diamond keyframe on the blue ball position until it matches the last position of the stroke.. That's all there is it. Your timeline should look something like this:
One last question. You have a non-standard composition size. It may not render correctly. What is the reason for the odd size. NTSC D1 Widescreen should be 872 X 486, It's acceptable to also have a comp that's 872 X 480. MPEG compression requires an even number of pixels so your 853 dimension is very likely to cause problems or be automatically resized to a standard frame size.

Position parameter within 3D nested groups?

I have a total of six drop zones in 3D space. They are vertical, while the animated background is slanted in the x-axis beneath them. I'm getting a little confused as to the x, y, z coordinates of the drop zones, as they do not seem to be relative to the 0,0,0 xyz coordinates of the canvas. Is there a way to take a screenprint of the canvas and layers tab for me to post? Until then, here is how the nesting looks within the layers tab:
-user content
-drop zone 3
-drop zone 3 portrait
-drop zone 3 landscape
-drop zone 2
-drop zone 2 portrait
-drop zone 2 landscape
-drop zone 1
-drop zone 1 portrait
-drop zone 1 landscape
I have the entire user content group dropping vertically down, and then animate each of the drop zones. My confusion comes in that I've been keyframing the positions, which I find easier than the record button. But, the positions of the individual portrait and landscape drop zones seem to take their 0,0,0 relative to the position of the group they are within, rather than the absolute zero of the canvas. For instance, when drop zone 3 appears to be right in the center of the canvas, it's x and y coordinates are somewhere around 260, -200, which is its position relative to the user content group, not the canvas as a whole. Should I animate them all individually instead of in groups to get actual x,y,z coordinates? or does it even matter?

I should have previewed the post as it took away the formatting for the nesting. The user content group has drop zones 1, 2, and 3 nested within it. Each drop zone group has the portrait and landscape drop zone (with applied effects) nested within it. The x,y,z coordinates of the actual drop zones appear to be relative to the top level group, rather than to the 0,0,0 of the canvas. Wow, that was a much more concise way of explaining the issue.

[Solved]Bash: get positional parameter '$num'

I can't figure out how to do it without using eval:
eval param='$'{$num}
I'm pretty sure it's safe, because num will either be $# or the result of $(( $# - 1 )). But it seems like there should be a non-hackish way to do this.
XYZ: I use diff a lot to compare directories so I made the following function. If I pass -1 to the function, the "Only in <first dir>" messages should be filtered out. Likewise for '-2' and '<second dir>'. '-12' should filter out all 'Only in' messages.
ddif() {
local param exclude diffopts
while (( $# > 2 )); do
if [[ $1 = '-i' ]]; then
diffopts+="--ignore-file-name-case "
shift
elif [[ $1 = '-1' ]]; then
param=$(( $# - 1 ))
eval param='$'{$param}
exclude="Only in ${param//\//.}"
shift
elif [[ $1 = '-2' ]]; then
eval param='$'{$#}
exclude="Only in ${param//\//.}"
shift
elif [[ $1 = '-12' ]]; then
exclude="Only in"
shift
fi
done
if [[ $exclude ]]; then
diff -rq $diffopts "$1" "$2" | sed /"$exclude"/d
else
diff -rq $diffopts "$1" "$2"
fi
$ ddif /mnt/usb/bash /mnt/linux/bash
Only in /mnt/usb/bash/functions/bak: ddif.f.0
Only in /mnt/usb/bash/functions: ddif.f
Files /mnt/usb/bash/functions/test.f and /mnt/linux/bash/functions/test.f differ
Only in /mnt/linux/bash/: root-bash_aliases
Only in /mnt/linux/bash/: root-bashrc
$ ddif -1 /mnt/usb/bash /mnt/linux/bash
Files /mnt/usb/bash/functions/test.f and /mnt/linux/bash/functions/test.f differ
Only in /mnt/linux/bash/: root-bash_aliases
Only in /mnt/linux/bash/: root-bashrc
$ ddif -2 /mnt/usb/bash /mnt/linux/bash
Only in /mnt/usb/bash/functions/bak: ddif.f.0
Only in /mnt/usb/bash/functions: ddif.f
Files /mnt/usb/bash/functions/test.f and /mnt/linux/bash/functions/test.f differ
Last edited by alphaniner (2014-04-18 17:34:41)

Thanks, I can definitely work with that. Here's the updated function:
ddif() {
local exclude diffopts
while (( $# > 2 )); do
if [[ $1 = '-i' ]]; then
diffopts+="--ignore-file-name-case "
shift
elif [[ $1 = '-1' ]]; then
exclude="Only in ${@:$(( $# - 1 )):1}"
shift
elif [[ $1 = '-2' ]]; then
exclude="Only in ${@:$#:1}"
shift
elif [[ $1 = '-12' ]]; then
exclude="Only in"
shift
fi
done
if [[ $exclude ]]; then
diff -rq $diffopts "$1" "$2" | sed /"${exclude//\//.}"/d
else
diff -rq $diffopts "$1" "$2"
fi
Anyway, I just posted the function for context. I'm not necessarily looking for alternatives or anything.
Last edited by alphaniner (2014-04-18 17:34:05)

How to position a PDF document in Preview?

I've got a PDF ready-to-plot document. It's an architectural drawing on a A1 sheet and I have to print it on my machine which is not equipped with A1 sheets, but with a roll feed 42" wide (namely 1067 mm), set as a custom size (by a custom editable lenght of 150 cm), as shown in the attached screenshot.
The thing is: I'd like to save paper by moving the drawing on the bottom of the preview sheet, in order to get the plotter printing the image first and then stopping. While navigating the preview options I haven't seen any setup for changing the position of the printed area on the sheet. Is it really missing??
Other than creating an ad-hoc landscape oriented A1 (I believe it might be rotated from the application itself, but I didn't find out how!) that will fit the actual paper size, how can I solve this? Should I use a PDF specific app (such as Adobe Reader) to set the position parameter?
Thanks!

Found out how: I currently print on a PDF A0 sheet.

(Data Structures) Position (in Lists) ...simple - Urgent help needed!!!

I know that Position is the abstract data type and that it supports only one method - element() (that returns the element stored in this position).. Now when I wish to implement a List (with doubly linked list) using the Interface List...In the Interface List there are quite few methods to implement , however, few of them require Position parameter...And this is where I am getting confused..What is the Position parameter? A number? or? Here is a sample code
//Node class for implementing a Doubly linked list
Class DoublyNode implements Position
{ public DoublyNode prev, next;
public Object element
//constructor
public Dnode()
{ prev = null
next = null
element = null
public Object element(){
return element;
Class NodeList implements List{
// bunch of methods and variables
public Position before(Position p) // What is Position parameter? a position number? or what?
{ DoublyNode v = (DoublyNode)p;
DoublyNode prev = v.prev;
return prev;
Now I know since DoublyNode implements Position, we can cast a position to a node, but what is that Position parameter? Can anybody explain this minor detail to me? Or how do these Position parameters work in programing? All I know is, given a position parameter (what ?) the Doubly linked list will instantly locate the appropriate node (how) and you can cast it to a node and return the node...but how does this Position work?
I am aware of the fact that everytime you insert in the list , that inserted element gets a position (a number?) how do I refer/catch back that node ? Via position (number)?
Please Help....
I appreciate it a lot!!!

There's no standard Java class called Position, at least none that has anything to do with lists or collections. So this must be a class or interface that somebody else wrote. At any rate, a Position parameter needs a Position object, obvious as that may sound. How do you create a Position object? Somebody with documentation of the Position class or interface might be able to help here -- is this homework?

Parameter behaviors broken.

i'm having an issue with parameter behaviors and perhaps someone could let me know if they could reproduce the problem (or point out my user error).
-new document, move the playhead to frame 1
-add media to the timeline (anything. still image, or just create a rectangle)
-add an oscillate parameter behavior to the position parameter.
-set amplitude to 0, speed to 100
-add a ramp parameter behavior to the amplitude parameter (of the oscillate behavior).
-set the start value 100, end value to 0
-play the movie
it should behave correctly at this point, just a simple oscillation that winds down and the object should stop in it's original location.
now, move the layer (and it's behaviors) to the right on the timeline. play again.
the behavior i get is that the object appears on screen when it's supposed to, but remains static at first. the animation will begin mid-sequence at the frame number double of the layer's in point. ie. if i move the layer's in point to frame 10, the animation will begin at frame 20, but the object will jump to it's intended location 10 frames into the animation.
if you slide the layer back to frame 1 the correct behavior should return.
i haven't tried other combinations of behaviors, but i have tried changing in points rather than sliding which also introduces odd playback.
anyone else experience this? any workarounds?
for those interested, i'm using these behaviors to simulate mass in my animations without having to keyframe it. you know, slide a graphic onscreen, then have it overshoot slightly and return to it's final resting point. it's really nice to be able to use behaviors to nail the animation quickly and believably, but it's a show-stopper that i can't slide my elements around to adjust their timing.
-bt

I see you also have Motion 4 installed. Is your FCP Studio installed in a separate folder. All studio aps should be together in a separate folder not individually in the applications folder. That is Apples recommendation to avoid conflicts. Do you have any other problems with Motion 5 or FCPX ( If you have that as well). If that is not an issue then I would trash Motion 5 preferences. Preference manager from Digital Rebellion which is a free download does this very safely and easily though you can do it manually if you like. I can not repeat your problem. I can apply parameter behaviors to properties in the inspector or from the behavior button in the tool bar with no issues. If trashing preferences doesn't help then try a new user and see if the issue is there as well. Next step if none of this works would be to reinstall Motion. Good Luck!

Positional parameter

Similar Messages

Maybe you are looking for