Positioning dynamic text in SAP Script windows

HI all,
Is there any control command to position DYNAMIC text that comes from a variable into a window...
Regards,
Chandra Sekhar

Hi chandra,
You can move the text into one variable in the print
program and in the layout form call this as
&VAR&.
Thanks&Regards,
Siri.

Similar Messages

SAP Script - Window and box

Hello All
I have done changes to include few(3) lines in a SAP Script window. Because of those 3 lines, contents that were printed earlier are not getting printed.
The window is getting printed inside a box and it is defined as
BOX FRAME 10 TW.
Window height is 22.50 Ln,width 9.50 CM.
To rectify this should I increase the height of this window or should I define the attributes of the box
Please reply at the possible earliest.
Thanks in advance.

Check this
Setting default parameters for a box:
You can use the POSITION and SIZE commands to set default parmeters for a box.
Instead of:
/: BOX XPOS '11.21' MM YPOS '5.31' MM HEIGHT '10' MM WIDTH '20' MM INTENSITY 10 FRAME 0 TW
You can write:
/: POSITION XORIGIN '11.21' YORIGIN '5.31' MM
/: SIZE HEIGHT '2' MM WIDTH '76' MM
/: BOX FRAME 10 TW INTENSITY 10
This can be usefull if you gave several boxes that share the same parameters.
If you want to set the position realtively to the window use POSITION WINDOW
to set the position to the top/left start of the window. Then use POSITION
to set the current position relatively to the start of the Window.
Note that you uses "+" or "-" in the ORIGIN position to the set the position relatively.
/: POSITION WINDOW
/: POSITION XORIGIN '+5' MM YORIGIN '+10' MM
the position is now 5 MM from the left and 10 MM from the top of the window
NOTE: After using the position command you can move the current position
realtively to the last used position
/: POSITION XORIGIN '+10' MM YORIGIN '+20' MM
Now the position will be X = 15 and Y = 30
Drawing a line. You can draw a line by setting the Height or Weidth to 0
and add a frane. E.g. a horizontal line:
/: SIZE HEIGHT '0' MM WIDTH '200' MM
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.81' MM INTENSITY 100

Standard text in SAP Script

Hi All,
I am Creating Standard text in SAP Script. I want to Transport it to Quality and Production servers.But while saving standard text it is not asking transport request no.weather we need to create the text seperately in quality and in production or we can attach it in to transport request. Please suggest me.
Thanks and Regards
Partha.

Hi partha,
1. We can use the standard program
RSTXTRAN
2. It is meant specially for this purpose only.
(we can attach standard text to a transport request)
regards,
amit m.

Problem in using standard text in SAP Script

Hi All,
I have to replace English text hardcoded in a script with standard texts (SO10) in Spanish. When I am including the standard text in script, it is displayed in different font and bigger size. I want to reduce the size and change the font of standard text. Is there any way to do that?
Thanks in advance
Radhika
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 4, 2010 2:37 PM

Please check the links below , which might hel you..
Re: Setting font to standard text in sap script
How to change stranded text font in script
Regards
Satish Boguda

Problem in long text in SAP script editor

Hi ,
i am maintaining long text in SAP script editor , when i am trying to change the long text in SAP script that changes are not reflected in print preview ,for example when i am giving tabs in the script then in print preview of the PO these tabs are displayed as , , ( comma) , and underlines are not appearing in print preview.please help me on this.
Thanks and regards.
Rajeshwar.

hi
you have to install the correct printer which supports the displaying the drawings and objects/

PO for item of service Level short and long text using sap script

Please let me know how to do the PO for item of service Level short and long text using sap script.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on May 5, 2009 10:25 AM

Hi ,
In the transaction related to PO select the path goto->header texts and then details of the texts like ID,objectname,language,name.Pass all theses details to 'READ_TEXT ' FM. Then you will get text lines described for a perticular Po ,similarly for item also.
Thanks,
Suma.

Dump error when clicked on text elements in SAP Script window

Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category               ABAP Programming Error
Runtime Errors         DATA_LENGTH_TOO_LARGE
Except.                CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program           SAPLSTXK
Application Component BC-SRV-SCR
Date and Time          30.04.2014 20:00:08
Short text
     Invalid partial field access: Length is too large
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
      caught in
     procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
    The reason for the exception is:
    In the executed program "SAPLSTXK", the system attempted to access the field
    "ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
    However, a partial field access with a length specification that is
    larger than the field length is not allowed.
How to correct the error
    Reduce the length used to access the field.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
    "SAPLSTXK" or "LSTXKFRN"
    "TOKEN_COMMENT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938       if g_tm_open    eq true or     " Section
2939          g_tm_b_close eq true.
2940         l_token = '\chcbpat0'.
2941         l_len = strlen( l_token ).
2942         token_control = true.
2943         assign l_token to <itf1>.
2944         perform put_itf1_new using l_len.
2945         perform token_line_begin changing l_next_token.
2946       else.                          " without section
2947         concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948         l_len = strlen( l_token ).
2949         token_control = true.
2950         assign l_token to <itf1>.
2951         perform put_itf1_new using l_len.
2952       endif.
2953     elseif l_next_token-code eq ')L'.         " \par
2954       l_token = '\par'.
2955       l_len = strlen( l_token ).
2956       token_control = true.
2957       assign l_token to <itf1>.
2958       perform put_itf1_new using l_len.
2959     elseif l_next_token-code eq '(C' or       " \par + format
2960            l_next_token-code eq ')C' or
2961            l_next_token-code eq '(&' or
2962            l_next_token-code eq 'TA' or
2963            l_next_token-code eq 'SC' or
2964            l_next_token-code eq 'ST'.
2965       concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966       l_len = strlen( l_token ).
>>>>>       itf_token(l_len) = l_token.
2968       token_control = true.
2969       assign l_token to <itf1>.
2970       perform put_itf1_new using l_len.
2971     endif.
2972
2973 * Step 7: (L to disarm
2974   if g_compose eq true and
2975      l_next_token-code eq '(L'.
2976     perform read_next_itf_token(rstxscan) using p_token.
2977   endif.
2978
2979 ENDFORM.                    " token_comment
2980 *&---------------------------------------------------------------------*
2981 *&      Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 *       add default language to rtf
2984 *----------------------------------------------------------------------*
2985 *      -->P_HEADER text
2986 *      <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
Rekha

Hi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel

Sap script window

Hi All
Is it possible to print the outer line of the window in SAP script like address window, I want to print the whole address in a block. IF any body can guide me that would be great.
thanks
C

Hi
This will help you.
/: BOX XPOS YPOS WIDTH HEIGHT FRAME INTENSITY
/: POSITION XORIGIN YORIGIN WINDOW PAGE
/: SIZE WIDTH HEIGHT WINDOW PAGE
BOX:
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame. Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Example:
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Regards
Anshul

How to use Standard text in SAP SCRIPTS

Hi all,
Please tell me how can we use the standard text what we have created in SO10 with sap scripts.

Hi Gaurav
You can create standard texts using the transaction SO10. Then to insert these standard texts in the SAPScript choose the menu, Insert->Text->Standard and choose the standard text that you want to choose.
Alternatively, you can display standard texts in your SAP Scripts using the command:
INCLUDE ZSTEXT OBJECT TEXT ID ST LANGUAGE EN
where ZSTEXT refers to the Standard Text name.
Reward pts if found usefull
Regards
Sathish:)

Dispaly standard text in SAP SCRIPT which content saved using SAVE_TEXT FM

I want to display one standard text content in SAP SCRIPT and want to store content of it during run time.
For that, first I have created one standard text using SO10.Named the standard text as Z_TEST_WRITE. Initially it was empty.
In my SAP SCRIPT, I try to display the content of the standard text using below given SAP SCRIPT code and report program. Although I am able to store text in Standard text
Z_TEST_WRITE but in first display of the SCRIPT it is not displaying against the include command of SAP SCRIPT. But when I see the content of Z_TEST_WRITE through SO10 transaction, I can see the content with new text which was previously empty.
Now if I do the same transaction newly (suppose second time), then text stored in standard text Z_TEST_WRITE is displaid against includes command of SAP SCRIPT.
My print program is a SAP STANDARD which one can be changed.
/:   DEFINE &NAME& = ''
/:   PERFORM TEST IN PROGRAM Z_SAVE_TEXT
/:   CHANGING &NAME&
/:   ENDPERFORM
<B>&NAME&</>
/:   INCLUDE Z_TEST_WRITE OBJECT TEXT ID ST
REPORT Z_SAVE_TEXT.
FORM TEST TABLES IN_PAR STRUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA IT_HEADER LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA: LS_HEADER LIKE THEAD,
        LT_LINES TYPE STANDARD TABLE OF TLINE WITH HEADER LINE.
OUT_PAR-NAME = 'NAME'.
OUT_PAR-VALUE = 'Sample text for Test'.
APPEND OUT_PAR.
*-Populate Header Text details
LS_HEADER-TDOBJECT = 'TEXT'.
LS_HEADER-TDNAME    = 'Z_TEST_WRITE'.
LS_HEADER-TDID      = 'ST'.
LS_HEADER-TDSPRAS   = SY-LANGU.
*-Populate details of Text
CONCATENATE 'Shipment No   :' 'RM Ship No' INTO LT_LINES-TDLINE
SEPARATED BY SPACE.
LT_LINES-TDFORMAT = '*'.
APPEND LT_LINES.
CONCATENATE 'Bill of Lading:' '1234567' INTO LT_LINES-TDLINE
SEPARATED BY SPACE.
APPEND LT_LINES.
*-Save Text
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
      CLIENT          = SY-MANDT
      HEADER          = LS_HEADER
      SAVEMODE_DIRECT = 'V'
    TABLES
      LINES           = LT_LINES
    EXCEPTIONS
      OTHERS          = 1.
IF SY-SUBRC NE 0.
    EXIT.
ENDIF.
COMMIT WORK and WAIT.
ENDFORM.                    "TEST

Hi,
If the text is getting displayed the second time, then this should be due to delay in saving the text.
After your COMMIT WORK AND WAIT in your report program, just put a WAIT FOR 2 SECS and check again.
Regards,
Suganya

Dynamic Text in SAP portal login page

Hi All,
I want to display some text information in the SAP Portal login page.Is it possible to display dynamic text in the login page?
Can anybody help in this?
Regards,
V Karthi

Check the following links as well.
[Customizing Portal Login Page;
[Portal Login Page Customization;
Check all 3 weblogs.
Regards
Puneet

Problem passing texts into sap-script

Dear Experts,
I have a requirement, where I have to pass some text-lines from my selection-screen of the driver-program to the sap-script,i.e. whatever I write in those text fields that should be displayed(printed) on the specified place of my script. Another specification is that,
those lines will get printed only if the checkbox on my selection-screen is checked.
What should be the procedure,please help me.

The text lines on the selection screen will be in a variable. Pass the variable to the SAPScript. I don't see the problem.
Rob

Formatted Text Edit & SAP Script Text

I'm working through a business requirement to input some long text, and then update an existing SAP script text object (attached to a sales order).
I'm using a formatted text editor to allow the users to enter the text - however I can't find a utlity that allows me to convert this data into a format that can be saved into a sap script text.
Thanks,
Heather

Hi Heather,
Please check this...
Re: From Web Dypro Text area to SAP Script text object(Tline table)
http:///Tutorials/Smartforms/PassingTableData/Script1.htm ... add saptecnical.com before tutorials.
Cheers,
Kris.

Dynamic columns in SAP script

Hi,
I have asked to provide a matrix type layout in SAP Script.Also in this matrix, number of columns is not fixed. At runtime it will be decided that how many columns will be there on the layout depending on the data fetch by the program. Can we provide this using requirement using SAP script or smartforms.
Thanks & Regards
vatsa

Hi Vatsa,
Just before getting into the SAP-script, determine how many columns needs to be displayed in the output and pass that variable to the SAP-script.
In SAP-script, whereever you define the BOX for displaying the columns, use the following commands. Use the necessary size for the width of the column.
An example is given below.
Data: W_No_of_Columns&> type i.
/:           IF &<W_No_of_Columns&> EQ '4'
/:           BOX HEIGHT '22.20' LN WIDTH '59' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '6.5' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '15' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '25' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '36.5' CH FRAME 10 TW
                ENDIF.
/:           IF &<W_No_of_Columns& EQ '5'
/:           BOX HEIGHT '22.20' LN WIDTH '59' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '6.5' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '15' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '25' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '35' CH FRAME 10 TW
/:           BOX HEIGHT '22.20' LN WIDTH '45' CH FRAME 10 TW
                ENDIF.
Hope this helps.
<REMOVED BY MODERATOR>
Thanks,
-G
Edited by: Alvaro Tejada Galindo on Jul 8, 2008 10:57 AM

How to draw dynamic table in SAP Script !

Hi,
<i>I like to draw a table in the main window, the table height should depends on number of rows displayed on it.
Could any one please help on this.
Thank you,
Senthil</i>

HI senthil
you have to use the BOX command in the SAPSCRIPT using which you can draw the table in script.
in the starting of the MAIN WINDOW draw a horizontal line and then display your vairables
in end again draw a horizontal line to close the table.
the height of the vertical line will the number of records in the internal table.
the vertical line can be drwan uisng
BOX XPOS 10 YPOS 20 width 0 CH hieght <rowcount> CH.
regards
kishore
regards
kishore

Positioning dynamic text in SAP Script windows

Similar Messages

Maybe you are looking for