Possibility of cost allocation through PRT

I have a costing requirement where the cost of a die on which components are manufactured is to be allocated on the components being manufactured based on the useful life of the die (in terms of no. of components that can be produced). Can this requirement be taken care of through PRT ?
Thanks,
Kaustubh

Hi,
You can surely maintain die as PRT - Equipment with IE01. Die is used for multiple cyles in manufacturing. So you can maintain both lifecycle & cost with maintaining it as Equipment.
There is one field called measuring counter where you can maintain no. of cycles for which you use same die & equipment itself is treated as an asset. So you can monitor cost & depreciation as well.
Regards,
Tejas

Similar Messages

Change in Cost Allocation Flexfield

Hello,
Client is currently using HRMS for the past one year. Now we need to make a small change in the Cost Allocation Flexfield structure. How will this affect the past data. How can we address this scenario. I seek your expert advise to handle this effectively.
Regards,
Jeeves

Hello Gaurav,
We're trying to change the value of a segment from 4 digits to 5 digits. We want to update the existing values. Is this possible from the back end.
Regards,
Jeeva

Pay Cost Allocation API

I have successfully created and run PAY_COST_ALLOCATION_API.CREATE_COST_ALLOCATION in a test environment. The only issue I am having is that instead of end dating the cost allocation on a particular assignment and creating a new allocation on the same assignment, it creates a new assignment for the employee with new costing information.
Is there a way to simply end date the existing costing allocation for an assignment and insert a new costing allocation for the same assignment? It would seem as simple as updating the effective_end_date for the assignment in Pay_Cost_allocations_f and then inserting a new record in the same table with an appropriate effective_start_date, and although I don't see the update hitting any other tables, I hesitate to change the table directly in that way in the event I am missing something (always a possibility).
I thought it could be done with the Pay_Cost_allocation_api, but I cannot seem to see how.
Any help is appreciated.

Hi,
Have you tried using PAY_COST_ALLOCATION_API.UPDATE_COST_ALLOCATION API to update the cost allocation.
You can, like in most of the HR Public APIs, use the two modes: p_datetrack_update_mode = 'CORRECTION' or 'UPDATE' depending on your update mode (if you want to correct/override an entry or update and keep history of the records).
When writing such a script, you would have 2 main scenarios possible (as I can guess from your requirement): you either call PAY_COST_ALLOCATION_API.CREATE_COST_ALLOCATION or the UPDATE_COST_ALLOCATION procedure depending if costing information exists or nor for the given assignment. You can write a simple procedure which will do this check (based on table "pay_cost_allocations_f" for a given assignment_id) and depending on what's returned, you can call the proper PAY_COST_ALLOCATION_API procedures (CREATE or UPDATE).
Hope this helps...

Overhead Cost Allocation - with IFRS

Hi Gurus,
We have configured Leading Ledger for reporting in IFRS and a non-leading ledger for local (India) Reporting.
As this implementation is being done by our Overseas parent company - we are using template allocation for Overhead cost allocation.
However, we want to allocate expenses based on actual consumptions rather than on Process Output quantity. ie. for example - electricity charges we want to distribute based on actual no of units consumed by each department/machine/process.
Kindly advise, If there a possibility for having both methods in the system (automatic) or manul process for achieving this.
Thanks
Sree.

Hi Expert,
There is no such feature to Allocate Overhead Cost with Ledgers.
No need to Allocate Costs or Overhead Costs with respect to Leading Ledger - IFRS.
By default, the Costs or Overhead Costs are allocated to Leading Ledgers.
Regards,
GK
SAP

Resource Breakdown structure role in Project Cost Allocation.

Dear Experts,
What is the role of resource breakdown structure while running project cost allocations? Is it possible that targets in the allocation process gets the cost allocated to the resources in RBS which is same for source as well as target projects?

Hi
The resource breakdown structure (RBS) is used in the system to summarize the amounts from the lowest level leaf to the grouping / parent levels.
You can use a summarized amount of certain node on the RBS, per your source project, as the source amount that will be allocated.
On the target projects the allocation transactions are created as expenditure items. Those expenditure items will be on target project and task, using the expenditure type and expenditure organization you have setup for the allocation rule.
Dina

Validation, which prevents internal cost allocation between cost objects..

Dear Experts,
Can anyone assist me in how to create a validation, which doesn't let internal cost allocation to occur between the cost objects of different company codes. What steps to take?
Thanks,
Erne

Dear Ajay,
Thanks you for your answer, although I'm still in doubt about, which way to go with this.
I would like to do this the simplest way possible, but since I'm new to CO it's hard to figure out the right way. For the same reason I don't know much about the cycles either, but I'm on it to figure out how they work.
Are you sure there is no way to do this using validations?
Erne

Hi my iphone was stolen, and i need to retrieve my serial number, i dont have a box is it possible to get it through i tunes?

hi my iphone was stolen, and i need to retrieve my serial number, i dont have a box is it possible to get it through i tunes?

well my laptop was formatted and all data along as well, so is there any other way as i only have my login with purchased items on Itunes. Would apple be able t help me out?

Access of possibly undefined property number through a reference with static type...

Hello everyone !
I run into this problem today ... take a look on the code :
import com.trick7.effects.TeraFire;
for (var j:uint=0; j<10; j++) {
    var fire:TeraFire = new TeraFire();
    fire.x = j * 40 + 20;
    fire.y = 100;
    fire.number = j; //This line is causeing the problem
    addChild(fire);
    fire.buttonMode = true;
TeraFire class creates fire particles. The compiler error is :
Scene 1, Layer 'Layer 1', Frame 1, Line 7
1119: Access of possibly undefined property number through a reference with static type com.trick7.effects:TeraFire.
Anyone can help me to find a solution to this problem.
I can do that ".number" with a movieclip but not in this case. What can I do ?

I borrowed that class from the internet.
I made the changes you suggested: imported flash.Display.MovieClip and also made the class extend MovieClip.
The error is still throwing in compiler errors. I am not really good enough to edit this class because there are some functions I don't still understand very good. This is the class below:
package com.trick7.effects{
    import flash.display.BitmapData;
    import flash.display.GradientType;
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.filters.DisplacementMapFilter;
    import flash.filters.DisplacementMapFilterMode;
    import flash.geom.Matrix;
    import flash.geom.Point;
    import flash.geom.Rectangle;
    public class TeraFire extends MovieClip{
        public var phaseRateX:Number;
        public var phaseRateY:Number;
        private var offsets:Array= [new Point(),new Point()];
        private var seed:Number = Math.random();
        private var fireW:Number;
        private var fireH:Number;
        //火の色
        //private var fireColorIn:uint;
        //private var fireColorOut:uint;
        private var ball:Sprite;
        private var gradientImage:BitmapData;
        private var displaceImage:BitmapData;
        private var focalPointRatio:Number = 0.6;
        private const margin:int = 10;
        private var rdm:Number;
        public function TeraFire(xPos:Number=0, yPos:Number=0, fireWidth:Number=30, fireHeight:Number=90, fireColorIn:uint = 0xFFCC00,fireColorOut:uint = 0xE22D09){
            fireW = fireWidth;
            fireH = fireHeight;
            phaseRateX = 0;
            phaseRateY = 5;
            var matrix:Matrix = new Matrix();
            matrix.createGradientBox(fireW,fireH,Math.PI/2,-fireW/2,-fireH*(focalPointRatio+1)/2);
            var colors:Array = [fireColorIn, fireColorOut, fireColorOut];
            var alphas:Array = [1,1,0];
            var ratios:Array = [30, 100, 220];
            var home:Sprite = new Sprite();
            ball = new Sprite();
            ball.graphics.beginGradientFill(GradientType.RADIAL,colors, alphas, ratios, matrix,"pad","rgb",focalPointRatio);
            ball.graphics.drawEllipse(-fireW/2,-fireH*(focalPointRatio+1)/2,fireW,fireH);
            ball.graphics.endFill();
            //余白確保用透明矩形
            ball.graphics.beginFill(0x000000,0);
            ball.graphics.drawRect(-fireW/2,0,fireW+margin,1);
            ball.graphics.endFill();
            addChild(home);
            home.addChild(ball);
            this.x = xPos;
            this.y = yPos;
            addEventListener(Event.ENTER_FRAME,loop);
            displaceImage = new BitmapData(fireW+margin,fireH,false,0xFFFFFFFF);
            var matrix2:Matrix = new Matrix();
            matrix2.createGradientBox(fireW+margin,fireH,Math.PI/2,0,0);
            var gradient_mc:Sprite = new Sprite;
            gradient_mc.graphics.beginGradientFill(GradientType.LINEAR,[0x666666,0x666666], [0,1], [120,220], matrix2);
            gradient_mc.graphics.drawRect(0,0,fireW+margin,fireH);//drawのターゲットなので生成位置にこだわる必要はない。
            gradient_mc.graphics.endFill();
            gradientImage = new BitmapData(fireW+margin,fireH,true,0x00FFFFFF);
            gradientImage.draw(gradient_mc);//gradient_mcを消す必要は？
            rdm = Math.floor(Math.random()*10);
        private function loop(e:Event):void{
            for(var i:int = 0; i < 2; ++i){
                offsets[i].x += phaseRateX;
                offsets[i].y += phaseRateY;
            displaceImage.perlinNoise(30+rdm, 60+rdm, 2, seed, false, false, 7, true, offsets);
            displaceImage.copyPixels(gradientImage,gradientImage.rect,new Point(),null, null, true);
            var dMap:DisplacementMapFilter = new DisplacementMapFilter(displaceImage, new Point(), 1, 1, 20, 10, DisplacementMapFilterMode.CLAMP);
            ball.filters = [dMap];
I you can clarify a little bit further I would appreciate it a lot because I wasted some good time on this.

Call to a possibly undefined method getClipboardContents through a reference with static type flashx.textLayout.edit:ISelectionManager.

Hi Guys,
As i am using the nigtly build of TLF 4.0.0.11073.
I want to copy some text from the TLF, by copy operation. I am getting this type of Error.
- Call to a possibly undefined method getClipboardContents through a reference with static type flashx.textLayout.edit:ISelectionManager.
In the previous build, i dont use to get this type of error, but in this nightly builds i am getting this type of error.
Can anyone help me to fix the same or any workaound.
Thanks in advance.
Krishna

This functionality is still available, but it has moved. It's now in a TextClipboard class, in the same flashx.textLayout.edit package. So you should replace calls to getClipboardFormat() with TextClipboard.getContents().
Hope this helps,
- robin

Msg. error BK048 for manual cost allocation

Hi,
we got a warning message for manual cost allocation (KB15N), when posting this allocation just with a quantity and without an amount. We would like to post this allocation without amount and therefore need to change the message type from warning (W) to information (I), to do this posting.
When using transaction OBA5, there is just a fixed and not adjustable value for Standard with "W". Do you know any workarounds or how we can change this message type to do this posting?
Regards
Florian

Hi Florian,
HAve you assigned users in OBA5?.
Go to OBMSG, for this particular Message number in the allowed message types, specify IWE etc. In the standard column specify I. Also you could check on check box "Switch Off" if you want to have the option of not seeing the message at all.
Now goto OBA5, against the message number, in the "Online" column , specify I or - (Switch Off) and do the same in the BAtchl column also.
Now you need too specify a user only if you want this change for specific users , if you want all the users to be able to post manual cost allocation then do not specify any user name.
Do tell me if it works.
Regards
Susan

Cost allocation flexfield

hi
after reading payroll UG, i am a bit confused about cost allocation flexfield for payroll, assignment, element link, org,element entry.
can i consider this flexfield as a T ledger, the first popup field is for Debit, the second one is for Credit purposes, when they are used for those 5 sections?

the payroll - org - element entry - assignment - element link are levels at which you can define to show a segment or not.
In case a segment is specified at a higher level, it is inherited from the other levels, so an end user has not to enter all the data all over again. (like a waterfall)
The most detailed level is the element entry level. Imagine if the end user must enter there for each segment and for each segment all values. Too much work and too error prone.
So you can set values for a specific segment at a specific level (example company code at payroll level).
Costing then rolls up all levels to fully qualify all the segments.

I was in America and you ship over Amercan store now I went to Egypt transformed from Amircan Store to Egypt Store remains the payment method dollar and of possible action Director of through Cards iTunes you if introduced Carte iTunes on your Director of

I was in America and you ship over Amercan store now I went to Egypt transformed from Amircan Store to Egypt Store remains the payment method dollar and of possible action Director of through Cards iTunes you if introduced Carte iTunes on your Director of ship dollar or is it to Amarcain only Even if there was a deal in dollars and there is the Director of word I want to answer quickly and thank you. Ihave reedem word

I'm not entirely sure what your post means. Whether gift cards will become available in Egypt I don't know, I'm just a fellow user, I don't know what Apple might or might not be planning. But as I said, gift cards are country-specific.
If you are in Egypt then you can only use the Egyptian store. From the US iTunes store terms of use (and other country's stores will be similar) :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

Multiple Cost Allocation Structures in Single Business Group

We are curently looking at solution design of creating multiple Cost
allocation flexfield in single business group environment.
Purpose :
Based on organization structure (18 companies) , the finance
consultants proposed multiple COA structures with different
valuesets , wherein values sets will be specific to the companies .
This was suggested inorder to aviod tedious job of defining
validations and post production support.
This has impact on payroll solution design wrt to cost allocation FF ,
where in we have to define multiple structures to map to Accounting
FFs.
Woudl like to check if oracle payroll supports this kind of setups.
Note :The implementation is for UAE localization.
Rgds/Lavanya

If Finance System has multiple COA structures with different valuesets , wherein values sets will be specific to the companies then they will seperating cosing on Various OU Level.
As my understanding, you have to create multiple Business Group as per multiple COA structures .
Thanks

Cost allocation issue

Hi,
while doing Partial GR/IR i am getting below error message in Migo.
" Cost allocation document was not posted due to enter an amount."
Regards
My

Hi,
Question is not clear.Can you clarify which message type and short error message.
Regards,
Sreekanth

Function Module to Update Shipment Cost Document through Idoc.....?

Is there any EDI function module which can Update Shipment Cost Document through Idoc.....

Hi Vijendra,
Welcome to SDN.
You can use FM IDOC_INPUT_SHPMNT with message SHPMNT and IDoc type SHPMNT01/02/03/04/05 to update shipment document.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if very helpful.

Possibility of cost allocation through PRT

Similar Messages

Maybe you are looking for