Possible Chart Types Reports/Graphics

Where can i find a list or something like that, where i can see all possible Chart types Oracle Reports(Graphics) is able to build)

Simply start up graphics, create a new chart basing it upon a simple query, execute it and the chart properties will display all available chart types.

Similar Messages

  • Colour expressions for Chart type report on SSRS

    Hi Folks,
    Actually My Graph is populating this based on Table 2 results : At No 3 there is unique colour yellow there in table . how can I apply colour yellow bar at 3 , rest of them are one colour please help me.
    Thanks in advanse.

    Hi Cherukuri19,
    According to your description, you want to conditionally set the color of the series base on field person_colour’s value, if the value contains yellow, then set the series’ color to yellow, else, another color. If so, we can use an expression to achieve
    your goal. Please refer to the following steps:
    Right click series on the chart and open Series Properties dialog box.
    In left pane, click Fill.
    In pick color section, click the expression (fx) button, and type the following expression, then click OK.
    =IIf(Fields!person_colour.Value like "*Yellow", "Yellow", "Blue")
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • The end user want to choose chart type

    Hi experts,
    I have WAD reports and the end user wishes to select the chart type and graphics color at runtime. This is possible do it in BW version 3.5?
    Greetings & Regardas,
    Leonel

    Hi
    Check the following steps :
    1) Drag and drop a Button group item ( BUTTON_GROUP_ITEM_1)  from Standard Web Item panel .
    2) Goto Web item Properties  of BUTTON_GROUP_ITEM_1 .
    3) Under internal display -> List of button -> Create first button ->click right most button there
    This follows a Edit parameter Dialog box
    4)Provide a caption
    5) Action ->select  :  Command via Command wizard
    6) Command-> Select by clicking right most button
    This follows a Edit command Dialog box.
    7) Click on All commands tab -> Commands for Web item ->Double click on Call Chart Properties  Dialog
    8) Then in Command Target  -> Target web item -> Select the target chart say CHART_ITEM_1 -> OK -> Ok
    Hope this helps.. Ask if  you stuck somewhere
    Sonal...

  • Chart types in cewolf

    can anybody tell me all the possible chart types in cewolf

    This is done using the Secodary Axis. Check the following link.
    http://help.sap.com/saphelp_nw70/helpdata/en/0b/ac553bf3a76258e10000000a114084/content.htm

  • Business Graphics, intermixing chart types

    Hi to all,
    Has anyone tried to intermix chart types?  Specifically, i'm trying to display a "column" type chart, but I would like to have a straight horizontal line through the chart indicating a key value or values.  Any help would be greatly appreciated.
    Thanks in advance

    Hi Michael,
    follow the following link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web dynpro tutorial and sample applications.faq#q-20
    How to use Business Graphics in Web Dynpro applications?
    The following tutorial shows you step-by-step how to create a simple business graphic using Web Dynpro.
    A simple business graphic is a chart consisting of a category and one or more data series. Column charts, bar charts and pie charts are typical examples of simple business graphics.
    Simple business graphics differ from complex business graphics, such as scatter charts and portfolio charts.
    Requirements
    In order to use business graphics in your application, you must install the Internet Graphics Service (IGS) on your server environment. Furthermore, the IGS must be configured on the J2EE engine.
    Code Sample
    The ready-to-use project is available to download from SDN.
    Corresponding Tutorial
    Using Business Graphics
    Hope this helped you
    Regards,
    RK

  • Business Graphics - Chart Type - Columns, and Simple Scatter Type

    Hi,
        I am interested to know more about Business Graphics Specially Chart types Columns and
    Scatter type ( and Time Scatter).  I am facing problem in producing X and Y Co-ordinate values for Charts. (Specially Date Values in X Axis.). I tried with Time Scatter type and need more documents.
    Expecting Good Documents and suggestions.
    Thanks, 
             Vinod V

    Hi
    Check this link
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/86/243f403f0a9354e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/0b/79553b066d9414e10000000a114084/frameset.htm
    https://help.sap.com/saphelp_nw04/helpdata/en/0c/95c83956852b51e10000000a114084/frameset.htm
    thanks

  • Is it possible user to select the chart type in WAD??

    Hi All,
    I have a requirement in WAD, where customer wants to select their own desired chart in WAD.
    Is it possible user to select the chart type?? If so please let me know the path where i need to do the setting.
    Thanks in Advance.
    Regards
    Sathiya

    Hi,
    you have to press the right mouse button on the chart (it is not so easy - there are 2 different context menus) -> in context menu -> properties -> web item -> chart setting -> chart type
    Regards
    Erwin Buda

  • Chart Type in SAP BI

    Hi Experts,
    is it possible to implement a new chart type for report in SAP?
    Because the the sap Type could not help us?
    Cheers
    Gilo

    This is not possible directly with SAP BI.
    You can try to implement a 3rd party add on similar to the one provided by IBS Solution. Please see attached link for some of the custom chart types implemented.
    http://ibs-solution.de/CMS/en/gallery-3.html
    Thanks.

  • Can not converted to be a charter-type field

    Hi everyone,
      As i m new in abap . i wrote this code and received charter type error.
    *& Report  ZT11
    REPORT  ZT11.
    DATA: aa type lfa1.
         tables lfa1.
         select * from lfa1 into aa where lifnr > 'Z' .
             write / aa.
            endselect.
        if sy-subrc <> 0.
             write / 'No records found'.
            endif.
    error is
    'AA' can not converted to a character-type field.
    plz help to reslove the error .
    thanks in advance.
    Edited by: Faisal Abbasi on May 9, 2010 11:19 AM

    Hi Dear,
    This is Unicode problem, In unicode systme some restriction in programing.
    There is three kid of data type
    Character Processing ( C, N, D, T and STRING ).
    Byte Processing Mode ( X and XString ).
    Numeric Data Type ( I, P , F ).
    whenever in structure all kind of data types are used then you can not use WRITE and then whole structure name.
    in LFA1 in ECC6.0 if any custom fields are not added then up to length 1232 is determined as Character.
    so if you will give aa(1232) it will work similarlly other kid of remainig data tpe you move in another structure of required format and then check.
    REPORT ZT11.
    DATA: aa type lfa1.
    tables lfa1.
    select * from lfa1 into aa where lifnr > 'Z' .
    write / aa(1232).
    endselect.
    if sy-subrc 0.
    write / 'No records found'.
    endif.
    For better Understanding Check
    The following structure has both character-type and non-character-type components:
    BEGIN OF STRUC,
      a TYPE c LENGTH 3,    "Length 3 characters
      b TYPE n LENGTH 4,    "Length 4 characters
      c TYPE d,             "Length 8 characters
      d TYPE t,             "Length 6 characters
      e TYPE f,             "Length 8 bytes
      f TYPE c LENGTH 28,   "Length28 characters
      g TYPE x LENGTH 2,    "Length 2 bytes
    END OF STRUC.
    The Unicode fragment view splits the structure into four areas F1 - F5.
    [ aaa | bbbb | cccccccc | ddd | AAA | eeee | fffffffffffff | gg ]
    [            F1               |  F2 |  F3  |       F4      | F5 ]
    Offset/length access is only possible for the character-type initial fragment F1. Specifications such as struc(21) or struc7(14) are accepted and are handled as a single field of type c. An access such as struc57(2), for example, is not permitted in Unicode systems.

  • Chart type option in diadem

    Hi,
    Do we have type of chart selection in diadem as like in excel which has different chart types like line, XY scatter, pie chart. At present I need X Y scatter type chart for my data.
    For example I have data like below,
    X -  0,    0.1,    0.2,    0.3,      0.4,    0.5
    Y - 300,    0,   250,       0,       350,    0
    I need the graph starting from 300 and coming down to zero and again starting from 250 & coming down to zero and again starting from 350 & coming down to zero. There should not any line joining from zero to 250 or from 0 to 350.
    Is it possible in diadem.
    Regards,
    X. Ignatius

    Hi Igni,
    DIAdem REPORT has the most flexibility in its various curve styles, of which XY Scatter is one, but a Pie Chart is completely missing.  Most people mean by an XY scatter plot a graph of only markers.  It sounds like you're requesting some of the points be connected by a line but other points not be connected.  Is there a regular pattern to the connections?  Could you send a picture of what you want to see?  If I understand you correctly, then we can do this in DIAdem by adding a NoValue between any data point you don't want to connect with a line.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Charts in Report Designer - choosing columns and rows for categories

    Hi,
    I am trying to create a pie chart in report designer from a data provider which has 4 rows and 4 columns. As a default the chart created is using the 1st row for data and the four columns as categories.I want the pie chart  to use the first column for categories and 2nd column for data. How do I change the default chart behaviour?
    Best regards,
    Jai

    Hi Jai,
    take a look at:
    "Class 1 Chart Types" in http://help.sap.com/saphelp_nw04s/helpdata/en/c9/08533b97037963e10000000a114084/frameset.htm
    Link is regarding WAD web item but editing is the same in Report Designer.
    Here you will get information with example query for editing pie charts and what is possible or not.
    like:
    Structure of the Data Provider for a Pie Chart
    In a pie chart, the underlying table has only one row. The values in the columns form the pie segments.
    If the table contains more than one row, the additional rows are ignored when the table is converted into a chart. However, you can define which row is to be used (see below).
    Additional the link describes how to build the query for your requirement.
    Regards
    Andreas

  • Polar chart type: show different values

    Hello,
    I have a polar chart type it would be work pretty good but I have a question. For the chart type I created a query and the result looks so:
    <b>Region</b>  <b> real Value   calValue</b>
    EMEA                 -5%                 95
    LATIN                  8,3%               108,3%
    For the chart type itself is the calValue e.g. 95 important. But I want to see the Value -5%.
    That means the chart type pictures works with the calValue but the User should see the realValues. Is it possible?
    Thanks a lot for your help
    CU
    patty

    Check out our sample reports by downloading them. Most have charts to show you how to use them.

  • Combining two different Chart types into one graph

    Hi All,
      I am developing a graphical BW report using WAD. I need to place two differnt chart types into one graph.For example, I have Volume and Quantity .Here the volume should be displayed in Bars and Quantity should be displayed in Lines in the same graph. X axis(Country) is same for these two . I am not sure how to achieve this. Please do let me know if anyone has solution for this.
    Thanks for your time.
    Thanks & Regards,
    Raja

    Hi Andreas,
      One word I can say is 'Perfect' . Even though I am out of office now,I hope the example perfectly will solve my problem.I will try it.
    Thanks for Aduri and Pcrao also for their suggestions .
    Thanks again and I assigned points to all to say my thanks
    Regards,
    Raja

  • Lucene Bottom N type report

    I have a requirement to write a report which shows the least occurances
    of some events. I have found example of Top N type reports, but is it
    possible to reverse the order to get Bottom N report in lucene?
    For Top N we have following:
    GROUP BY $P{EventTag} TOP $P{TopN}, sev TOP 6
    Changing TOP to BOTTOM in this query doesn't work. Also, I can change
    TOP to WHATEVER and it still does not complain about syntax.
    Could you help?
    Adam
    admroz
    admroz's Profile: https://forums.netiq.com/member.php?userid=3440
    View this thread: https://forums.netiq.com/showthread.php?t=46307

    Hi Adam,
    you could try to use a PrintWhen expression based on the build-in
    REPORT_COUNT variable:
    http://jasperreports.sourceforge.net...engine/JRVaria
    ble.html#REPORT_COUNT
    Norbert
    >>> On 12.12.2012 at 14:14, admroz<[email protected]> wrote:
    > Norbert,
    >
    > Thanks for your reply. We are trying to go a way you described, but we
    > still have some problems ‑ let me explain.
    >
    > The Top 10 Report (which is our base for Bottom 10 Report) uses
    > following lucene query:
    > SELECT
    > $P{EventTag} AS event_tag_value,
    > sev AS severity
    > WHERE
    > sev:[$P{MinSevStr} TO $P{MaxSevStr}] AND notnull:$P{EventTag}
    > $P{VendorProduct_Query} $P{SEARCH_QUERY_USE}
    > GROUP BY $P{EventTag} TOP $P{TopN},sev TOP 6
    > OVER $P{FromDtQry}, $P{ToDtQry}
    > $P{MaximumResultsStr}
    >
    > and there is also:
    > <field name="count" class="java.lang.Integer"/>
    >
    > Now, I don't know how the magic "TOP" clause is implemented, but I
    > assume that it does its job. Important thing is that there is grouping
    > on both on EventTag (eg. sip) and severity. Which means that "count"
    > columns contain amout of occurances of sip/sev pairs rather than sum of
    > sip occurances with any sev.
    >
    > So the first question is ‑ is the Top 10 Report working correctly? Does
    > it take biggest values in regards of sums for sip with any sev?
    >
    > As you advised, to have Bottom 10 we've removed TOP clause for EventTag
    > from lucene query. We also have to add sorting on count:
    > <sortField name="count" order="Ascending"/>
    >
    > and filter to limit results on a chart:
    > <filterExpression><![CDATA[new Boolean($V{SumOfCNT}.intValue() <=
    > Integer.parseInt($P{TopN}))]]></filterExpression>
    >
    > With an assumption that $P{TopN} is 10 then it should show 5 bars on a
    > chart. However, let's consider following data:
    >
    > sip | sev | count
    > 10.0.0.1 | 1 | 1
    > 10.0.0.1 | 2 | 1
    > 10.0.0.1 | 3 | 1
    > 10.0.0.2 | 1 | 2
    > 10.0.0.3 | 1 | 2
    > 10.0.0.4 | 1 | 2
    > 10.0.0.5 | 1 | 2
    > 10.0.0.6 | 1 | 2
    > 10.0.0.7 | 1 | 2
    >
    > Because data is ordered by "count" then it takes three times 10.0.0.1
    > and puts it on a first bar with a value of 3 (which is a sum for each
    > severity). It also increases counter by 3, so it shows only two more
    > bars on a chart for 10.0.0.2 and 10.0.0.3. Of cours the value for
    > 10.0.0.1 should not appear at all, because its sum is bigger than values
    > for other IPs.
    >
    > The only solution which we have for now is removing "sev" from group by
    > clause, but that way we are loosing some functionality of original Top
    > 10 Report.
    >
    > Is it possible to solve it in any other way? Even if it was normal sql
    > query I would doubt if it was possible to be done with one query only.
    >
    > Thanks
    > Adam

  • Is there any plan to make Power View (charts and report) more customizable?

    Hi,
    I just was playing with Power tool chain in Excel and office 365, this a nice product well down.
    I have a question about the whole idea, is there any plan to make charts more customizable for example user will be able to show the current filter value in the chart or view title (is good while  drill downing) or some simple stuff like showing the
    pie value not in tool bar but indicators in the chart itself  or changing the type of chart while drilling down (start with a column chart then drill to a pie chart) or...
    Or more generally some programming framework to customize Power View , for example some programming framework (writing add-in for an add-in :-))?!!
    thx

    Hi,
    -Yes simply the option to add the drill filters' value on the chart title (not just in the filter panel).
    - Yes, exactly. Showing labels On Pie Charts,
    Also about changing chart's type, I meant somehow be able to change the chart while drill downing (when you go down you can preset chart type for next level) 
     - The ability of connecting views to each-other (something like linking views and sending filters or other expressions/parameters from one view to the second view
    based on users actions like drill downing)
    - Also more generally about API/framework (and quite hard to achieve maybe),  the possibility to add some dynamic functionality like changing the color, show some dialog/ change the view navigation based
    on the user interactions or add custom themes (maybe CSS) (UI
    customization ) , the ability to call other data sources and change  the report dynamically
    Generally be able to add custom codes in the javascript/Html5 result report ( some )
    Also ability to add custom controls
    in designer part (and adding its client side behavior too  ) something like Custom Report Item (CRI) in Reporting Service.
    Br,

Maybe you are looking for

  • Using an iMac as a monitor.

    Hi all. It is possible to utilize an iMac 24 as a monitor for a MacPro? Thanks.

  • Insert date in dd-mmm-yyyy format

    I have a jsp page, from that i can enter values in oracle database. my jsp page is working, but the problem is that it can only accept the date dd-mmm-yyyy format. i.e 20-jun-2004, but when i enter date in dd/mm/yyyy format i.e 20/06/2004, it does no

  • Process Chain Termination issue.

    Hi,      I ran a process chain, its been terminated in the middle. here is the message from log. Process Execute InfoPackage , variant WBS Hierarchy has status Ended with errors (instance REQU_AI8QGHV5KCC7KC1VSNGPRY9VF )                              

  • Is is possible to take a finished project from iMovie 10, and move it to iMovie 9?

    Here's the deal. I've got a finished iMovie 10 project. I want to move it to iMovie 9. Here's why. In iMovie 10, when I shared it to Media, I didn't see any drop down to select the quality. i.e....like in iMovie 9....1080p or 720p or Large or Medium.

  • Control iPhone from PC?

    Is there any tool that lets you control your iPhone from a PC? I have a friend who recently purchased an iPhone but lives far away and needs help setting up a few things. I was thinking if there was something you could use to show the screen and cont