Possible Problem for US N95 User Upgrading to Firm...
On July 19, 2007 the new firmware version 12.0.013 for Nokia N95 became available through Nokia Software Updater for US product coded N95s. I installed it and only within 1-2 hours my phone messed up. It is now almost unusable. I am trying to figure out whether this problem stems from the new firmware or from another source that occurred by chance immediately after the installation of the firmware. I posted 2 videos on youtube showing the issues.
http://www.youtube.com/watch?v=Kl5NK4aTpy0&;mode=related&search=
http://www.youtube.com/watch?v=-ZEEjyow7bQ
I would like to hear what you think, especially whether you have ever seen or heard the same problem in any firmware version.
Thanks!
mg428
Hi Please read this link as I had exactly the same problem and this is the way i went about solving it. The phone became totally useless and i even got an error code when starting it up. This does work. Tried to link but couldn't get it to work.
Hi All.
On two different N95 when i upgraded the phones these are the problems i experienced and how i solved it. Just to inform you the two phone were set up totally different with totally different software on it but both were upgraded from v10
First of all i made backups onto the memory cards as suggested by Nokia. Don't do this!!!! backup to PC and restore from there.
I then ran the update with no Problems and restored from the memory card. Big problems started. First of all the main screen lost all it's functions and there where no standby shortcuts on the phones. I could get into the menus by pressing the menu keys but even trying to setup the phone from here gave me no results. The standby shortcuts could not be restored at all and i think the problem has to do with the Active standby apps. or Standby mode. Even the two shortcut keys at the bottom of the phone were gone. After which i rebooted the phone. Even worse things happened then the phone then said "Failed to load or Phone load failure. Contact your Phone Retailer"
The way to fix this is to press and hold the ( 3 * and the green answer key ) and then switch the phone on hold these three key until it asks for the country you live in. This formats the phone. Enter all the data asked for that is country, time and date.
Then restore from your memory card and straight away go into your phone settings using the menu key. Go to General setting and load the Factory Settings. After this re-customize your phone and everything works like a charm.
I have had no more problems from then on. Oh and the phone is a lot quicker.
The only problem i've had with the phone from v10 and still in v12 is that i can't choose a ring tone from the memory card. The card holds about 900 songs (2 gig card). The only choice i have is to select no ring tone or to download on. The way i get to choose my ring tone is to copy the song or ring tone to the phones memory remove the mem card select the tune from the phone once i've done this i re insert the mem card and carry on from there.
Hope this is helpful.
Best to you all.
The N95 is a great phone though.Message Edited by hotcat4 on 20-Jul-200706:11 PM
Similar Messages
-
Is July 9 internet issue a problem for Mac Pro users?
Is the July 9 internet issue a problem for Mac Pro users or has Apple taken care of this issue in updates?
It is a only a problem for users affected by the malware that replaces their DNS IPs on their macs. They already have a serious problem which they should fix. Follow the url in sig's post to determine if you are infected and how to remove it.
-
Tried to reset an error that my Id is disabled. Have.seen this to be a problem for other iPhone users. Any advice on correcting or contacting Apple direct? Thanks
Try contacting iTunes store support here: http://www.apple.com/emea/support/itunes/contact.html.
-
Does adding V-Card to signature cause problems for Outlook (Windows) users?
Hi -
I want to add a V-Card to my signature in Apple Mail (by drag and drop from address book to signature pane in Mail>Preferences). I have read that, in the past, this can caused problems for some recipients who use Windows Outlook.
Is this still the case? If so, how can I add a V-Card to my signature without causing problems for recipients?
Thanks -
DougI take note of your WNLB recommendation but in this case the error start on one of the CAS server first and client connected to the CAS that does not have any errors continue to work as normal.
I upgraded to SP3 late last year. This problem first happened in Feb 2014.
Have you checked the DNS settings on the VM - yes, and both of them are pointing to one of our DC's.
I would set the client with a Host file to just one CAS to rule out the WNLB - this would be too hard
to manage as when the issue happens again it could happen on CAS1 but the client could be connected to CAS2 so it wont experience the issue.
-
UDF access problem for only 1 User
Hi @ll,
i got the problem, that one user is not longer able to search bp records by using UDF. Also the user is not able to change the UDF values. This problem only happen on bp data. In every other form the access to udf is possible. Every other using could access UDF in the bp data.
Any idea ?
Regards Steffen
Ps. I grant admin rights for the user. The problem still exists.Hi Steffen.
I'm not sure this could be helpful for you, but have try to check the ENABLE FLAG for this udf in UDF PARAMETRIZATION?
Open the document whit UDF logging in with the user that have not permission in UDF. Then press CtrlshiftB and check the ENABLE flag for this UDF...
Sorry for my english....
Regards
Gianluca -
.Mac Alias - Small Niggling Problem for New Apple User
Hi,
I have very recently purchased my very first Apple computer - and yes, i am one of those life long MS-DOS/Windows users who have been lured by the ease and simplicity of the iPod (which apparently a lot of people are loath to admit, but hey, I'm not proud).
Anyhow, having got my nice new shiny system out of its box, and up and running, I set-up up a new .MAC account, and then set-up one alias, the thing is my 'alias' mail is not ending up in my .Mac mailbox, but my other mailbox which belongs to my broadband ISP.
Basically in Apple Mail ( I have OS X Tiger.10.4.3) I have an 'InBox' which shows everything from my two accounts, and separate mailboxes within : One called 'BlueYonder' who is my broadband ISP, and a second mailbox called '.Mac Mail'. IYSWIM?
Now ALL of the mail sent to my standard .Mac account address ends up in the .Mac mailbox, and the 'collective' InBox, but and here is the puzzle, any mail sent to my .Mac ''alias'' goes into the 'Collective' InBox and my 'BlueYonder' mailbox, but not into my .Mac mailbox!
I sent an email to the .Mac support team, and they said that it was either an issue with Apple Mailbox, and that I should look in here at the 'Discussions' or I have a Rule set-up.
Well I don't have a rule set-up except the one that was already set-up when I first bought my system. This is set to just highlight in Blue any mail from any 'Apple' address. No rules are set to move or change locations etc.
So can anyone,if possible please advise me what is going on with my mailbox and also how I can rectify it if possible please?
Thanks and all the best for the New year to you all.Drusus - would be good for you to share your findings here. It might help anyone else with the same problem in the future.
Thanks,
Brocks. -
Performance problem for mass transactions after upgrade from 4.7 to ECC6.0
Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
TajHi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services. -
11gR2 problem for dba group user
Hi Pavan Sir,
After the 11gR2 Installation and connect to oracle as one of the dba group user(ex: tuser)
1) when sqlplus / as sysdba --> startup nomount --> receiving the error ORA-48189 (The OS command to create directory failed) for the diagnostic_dest(ex: /disk1/oradata/test)location, but the specified directory is created and owned by the same dba group user(test).
2) If suppose the "/disk1/oradata/test" directory permission are modified by 777, the dba group user(test) can connect to nomount stage, but the sub directories of diagnostic_dest automatically gets created (like /disk1/oradata/test/diag/rdbms then etc......) are being owned by oracle user and also if the db is created ,the control file,redolog file and datafiles are automatically getting owned by oracle user but not by the test user.
Which was not the case till 10gR2.
Plz. provide any body provide us with some solution to overcome the above experienced problem which is implemented in our Dev. box.
Thanks in Advance.
Best regards,
Habeeb.Dear user,
Even if the perm are changed by -R ,the files are automatically owned by oracle user, not by the test user.
Have any body tried creating oracle database using dba group user in 11gR2, but the db files being created by test user should not be automatically owned by oracle user. If so , plz. forward me the steps.
Thanx in advance. -
I am logged in a computer (that is used by others) as a 'guest'. I would like to completely hide my browsing history and I hear this is done by 'resetting Safari'. My question is, will this mess things up for the other people who logg into use the computer? Or does the resetting apply only to the guest?
Hi Chris
anything, including resetting, that you do as guest should not affect other users who log into their own accounts. Just logging out of guest should remove the obvious history/cookies etc although of course it's possible for an admin of that computer to keep track of some info. -
Portlet Problem for an individual user
We are using the .NET implementation of Plumtree Corporate Portal 5.0.4. We have portlets running on a web farm that are built using .NET. The problem is we have two portlets that consistently work for the majority of our users, but there is one user in our NY office (we are located in Columbus, GA) that is now having a problem rendering the contents of the portlet. The error that comes back implies that the portal server is not able to make a request for the application. We are reasonably sure that the application functions. The user is able to click a gatewayed link of the application and it renders properly for him, but it simply will not show up in his portal window. Here is the error that we found in the source of the HTML from the user's machine:
Error in CHttpGadgetProvider::raw_GetHTMLText, The Portal Server could not retrieve the content for this gadget because of a connection error with the host. If this problem persists, please alert a system administrator.-->
This application worked for the user until about a week ago. The application has been running for several months. There are other applications that run on this same web farm that work fine for the user as a portlet. Again, a gatewayed link to this same application works fine for the user, just not in the portal as a portlet. This phenomenon has us stumped. We have checked portal settings even tried to point the remote server to one machine for this portlet. Nothing seems to work in the case of this particular user and these two portlets. Any insight you can give on this matter will be greatly appreciated.I am no expert from a code perspective but have seen some very odd behavior on portlets that are related to the browser version/components that the user has. I always test things out in Firefox if they are failing on IE. Also, check to see if the user has any non-native toolbars (have them send you a screen shot). Turn off all of these (Yahoo, Google, etc...) and see if things work.
Best of luck. -
1000v and possible issue for data storage firmware upgradation
Hi all,
We have IBM N series storage controller which provide storage to esxi4.1.We have hosted out primary and secondary VSM for 1000V deployment on this ESXi4.1.
We need to upgrade the storage firmware and I like to know if their is any possible impact on my 1000V.
As this is a outage change [becuse of storage will bring dowm] i like to know why precautionary measure will be taken so that my nexus 1000v remain un affectted because of this storage controller upgradation change.
If their is any link available for refference .
Thanks in advance.Since your storage is going down completely you will need to power off the n1k. Here are things You can do to minimize the impact of this:
1) ensure your running config matches your startup config (show run, show start)
2) ensure your system VLANS are configured correctly. Namely make the follow VLANS are system VLANS on your eths/veths that carry them: ESXi management, vCenter management, VSM management, control, packet, any storage VLAN (iSCSI or NFS)
3) make sure the VSMs have their reservations set correctly in ESX so they don't have to worry about resources during boot
Alternatively if you have a host with ESX installed on local storage you could migrate the VSMS over to that, storage vMotion the VSMS onto local storage and keep it running during the outage (though you should still verify your system VLANS) -
Real-Time 120fps web video now possible! (for 120Hz monitor users)
Hello,
With the emergence of "120fps" cameras (Galaxy S4, GoPro Hero 3, Casio EX-FC200S, and the upcoming iPhone 5S), Blur Busters did some research on a distribution medium for playing back 120fps videos in real-time. We have discovered some good news.
(1) Presently, 120Hz monitors are quite popular among high-end video game players. There are more than a dozen models avaialble:
http://www.blurbusters.com/faq/120hz-monitors/
One of the more popular models is the VG248QE, which as over 60 reviews on Amazon (4.5 out of 5 stars).
(2) The web is now a potential 120fps video distribution medium; and some computer users use 120Hz computer monitors now. There is now a way to speed up 120fps slow-motion to 120fps real-time, and it was recently discovered that all the popular web browsers support 120fps@120Hz (Internet Explorer, Chrome, and the new FireFox 25+ Beta) using the <VIDEO> element are now capable of playing back at 120fps in real time on a 120Hz computer monitor:
http://www.blurbusters.com/faq/real-time-120fps-video
In general, any machine capable of playing back 1080p@60fps, is easily capable of playing back 720p@120fps. Both are pretty similiar bitrates. Also, some websites (www.testufo.com using Chrome browser) also shows that it's now possible in some web browsers to automatically detect the refresh rate of a web visitor, so you can present 120fps videos automatically only to 120Hz visitors.
I want to make sure that Adobe Premiere Pro is capable of converting 120fps slow-mo into 120fps real-time, as a natively-encoded 120fps H.264 video file?
Thanks,
Mark RejhonAdobe employees:
I need an answer to this question as I'm getting more than one inquiry (I run Blur Busters) and I want to help people be able to create 120fps videos.
Do I recommend continuing using Adobe, or do I refer them to a competitor's product if it's the only way to output 120fps????
Even plain free tools such as ffmpeg can do 120fps!
Some people are starting to think abot 120fps editing (e.g. http://www.hfrmovies.com/tag/120-fps/ ...) so this is an emerging area that Adobe also needs to pay attention to.
The 120fps distribution medium is already here today, and it's called "web browsers running on a 120Hz computer monitor". -
Sync Problems for new ipod user.
Problem syncing my ipod mini. I can get about maybe half a song on my ipod (it is there when I disconnect it from the pc to check) and the itunes errors out saying "Attempting to copy to the disk "ipod name" failed. The disk could not be read from or written to." If I keep hitting the sync button it will start over again and continue uploading songs to the ipod but sure enough after a few min I will get this same error again. I think I have gotten about 3 songs loaded at the most before getting this error. Thanks for any help in advance and I apologize for asking this question and it has been answered previously.
After searching many postings about this very issue I think I have identified the issue. The iPod Control folder is set to read only. I go in as admin and uncheck that, launch iTunes and sure enough I check the folder and it is set back to read only. Any idea here?
-
Sign in problem for visually impaired user
I am visualy impaired and have trouble signingbin Your scrambled lettering , Iam unable toread, Is there another way to sign in
Hope THIS helps ..
-
Exchange Web Services for external O365 users w/UAG
The client has UAG in use, currently, for OWA and EAS for the on-prem mailboxes.
We have O365 Federation enabled right now using ADFS with proxies. ADFS is *not* behind the UAG firewall. sss.clientdomain.com resolves directly to the ADFS proxies. We've successfully tested the SSO redirect.
With UAG in play, how will that affect Exchange Online mailbox users who are trying to get to OWA from their home PC? The UAG proxy is set for pre-auth to the internal AD DS.
Is this going to be a problem for Exchange Online users using OWA and EAS? If so, how do I get around this? My goal is to make sure UAG is as small of a piece of this puzzle as possible, seeing it is nearing end-of-life.Exchange Online OWA users will likely have to authenticate twice here - once to get to the on-prem Exchange server for OWA through UAG, and then again at the ADFS Proxy, after the on-prem redirection. The alternative would be
to provide Exchange Online users the separate URL, so as to connect directly to Exchange Online, and therefore only getting prompted for authentication once at the ADFS Proxy.
Maybe you are looking for
-
How can I restore my new iMac back to when I first switched it on?
I was so keen to get my new iMac working that I got my name wrong in the setup and I stupidly skipped the migrate settings step which would have taken everything over from my old Mac. How can I get back to how things were when I first switched on so
-
Acrobat 9.0 error message when trying to open
Just got this error message when trying to open Acrobat Pro 9.0: Has been installed for 6 month, use 4-5 times per week, never had an issue until this. Usually I would do an 'Uninstall' 'Reinstall' before coming to the forum, but it will not allow me
-
How left-click "mouse" on MacBook Pro retina display?
A video I want to download to my rMBP says I need to left-click my mouse on a screen icon. How do I left-click a trackpad so it does the job? Do I need to change any settings or what?
-
I've seen lots of discussion about how to remove duplicate copies of the same song, but my issue is different. iTunes has duplicate entries in its database, but if I do show in finder, then both entries point to the same physical location. If I delet
-
[SOLVED] kernel panic - no init found
Hello: After my last system update, (including kernel) two problems appeared. First the magic files problem, solved with pacman -Qo, delleting and reinstalling (perhaps it has something to do with this problem). Second, this kernel panic when I resta