Possible problems with Check out and Open Component and delayed publishing
Hi,
I've experienced some seemingly wrong behaviors of the checkout and open component and also with the delayed publishing feature, I've listed it down :
1) The all important one:
We know we've delayed publishing features for content, if we set the Release Date metadata at a future date, the content will not be released immediately, but do we have a delayed publishing features for a website page. Through manage website the user can add / delete a page(section), may do include or exclude from navigation etc.. but can they set a future date when a particular page can be included in or excluded from navigation? This should be a standard feature for a WCM solution and I hope there is some solution for sure.
2) Can we set a datefield with a calendar feature as a page custom (section) property?
3) Again the issue with checkout and open component, only the user with admin privilege seems to be able to change the content, normal contributors cannot, cause every time is tries to check in with the old author name, so the user has to have admin privilege to assign a different doc author's name. No trace also who is making the changes.
4) Also facing a lot of problems while trying to implement when we use this checkout and open component. As we cannot check who is making the change there is to way to set us a step for self review, also user can only approve or reject but cannot edit the doc before passing it to the next step, if the step user is created using tokens then only checking out of the doc takes it pass the step user, but everything is working perfect with contributor data file. No problem whatsoever. Even if we use manual check out and then check in (i mean without using checkout and open component) this is working fine. But the main problem with non-technical users will be they would not like the content server portal at all and they would always prefer ms word over anything else. They would directly like to double-click on the website page, the word doc will pop up and they would make change and save.
Issue 1 and 4 are killer issues for us, I need your help to find a solution. I have few more issues that i will post later.
Regards,
Nirmalya
vijayr: Are u Vijay Ramanathan? Product Manager, Oracle UCM, u r my mentor sir.
Hey Shotdawq,
I was a bit low on bandwidth, so could not visit the forum any sooner.DIS is dynamic integration studio, it works on the webdav protocol.
you will need to install DIS on the client machines. The POC that i did was integration of SiteStudio with CheckOutAndOpenInNative.
I am also planning to referenc this functionality from WebSphere, what i have in my mind is to copy the java script from my sitestudio page and paste
it in the JSP, and then using the CIS or RIDC will execute the serverices. At present i am stuck in some other work, If i get this thing working i will
update you. In the meanwhile if you have some question for me, feel free to throw them.
cheers,
sapan
Similar Messages
-
Problem with 2 websites, can open websites and execute some functions but then it stops.
ie. www.thankyou.com.au - can get into the wedding registry listing requested but when I click on the one I want to open I get the message 'session timed out, return to home page and login again'; and
aussiefarmer.com.au - can open and login, view order options but cannot save order - saving icon appears and keeps circling.
Advised to check cookies and proxy settings - these seem to be ok.One solution is to change the sort album titles to
Live Trax Vol. 01
Live Trax Vol. 02
Live Trax Vol. 03
For more tips see Grouping tracks into albums.
tt2 -
Problem with JDev 10g ADF table component and rangeChangeListener
Hi,
I'm populating an ADF table component from a backing bean and would like the range of rows be changed using custom method on the backing bean.
I have declared table on page as shown below and the table is populated correctly. However the onRangeChanged method in the backing bean never fires when
user hits previous or next. Any ideas of what I missed ?.
Thanks,
Kenneth
<af:table emptyText="No items were found"
value="#{companySearchBean.companies}"
var="company" rows="20"
first="#{companySearchBean.firstCompany}"
rendered="#{companySearchBean.queryExecuted}"
rangeChangeListener="#{companySearchBean.onRangeChanged}">
<af:column sortable="false" headerText="Company Name">
<af:outputText value="#{company.partyName}"/>
</af:column>
<af:column sortable="false" headerText="Party Number"
formatType="number">
<af:outputText value="#{company.partyFileNo}"/>
</af:column>
</af:table>Hi,
I'm populating an ADF table component from a backing bean and would like the range of rows be changed using custom method on the backing bean.
I have declared table on page as shown below and the table is populated correctly. However the onRangeChanged method in the backing bean never fires when
user hits previous or next. Any ideas of what I missed ?.
Thanks,
Kenneth
<af:table emptyText="No items were found"
value="#{companySearchBean.companies}"
var="company" rows="20"
first="#{companySearchBean.firstCompany}"
rendered="#{companySearchBean.queryExecuted}"
rangeChangeListener="#{companySearchBean.onRangeChanged}">
<af:column sortable="false" headerText="Company Name">
<af:outputText value="#{company.partyName}"/>
</af:column>
<af:column sortable="false" headerText="Party Number"
formatType="number">
<af:outputText value="#{company.partyFileNo}"/>
</af:column>
</af:table> -
I m not able to find out where is check out and open component(WCM)
hi everyone,
i m not able to find out where is check out and open component and how it works. As m not able to open & edit the native document that m assigning.Plz help me in this ASAPHere's what I found. If you have a metalink login, try these links. Depends on what version of COAO you need.
CheckoutAndOpenInNative
Patch 6602355 Build version=2007-03-22 for 10.1.3.3.1
http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=6602355
Version=2007-03-22 on edelivery in UCM Downloads
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12648830947583585595::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,455524.1,1,1,0,helvetica#downloads
Version=7.7.0.244-2006-07-31 on edelivery in UCM Downloads
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12648830947583585595::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,455524.1,1,1,0,helvetica#downloads
There's actually a mapping here to figure out what file these extras are in:
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12648830947583585595::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,455524.1,1,1,0,helvetica -
I had problem with my apps,they open for a while and closes with in seconds i cant acess them
i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps
Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems. -
I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
What should I do?It's a scam. Have a look at this thread:
https://discussions.apple.com/thread/6058094?tstart=0 -
Question
I use google with firefox, everytime i open firefox and begin browsing or go to check my mail i get a firefox not responding error message on top left of screen. How do i get rid of this?Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
i've just downloaded facetime and every tie I attempt to open it I get the message"there was a problem with facetime you need to quit and reopen facetime" I've tried this but I just get the same message again and again
Hello tadom,
Thanks for the question. The following article outlines the exact error message you described, and a potential resolution:
OS X: "An internal FaceTime error occurred" alert after clicking Facetime icon in the Dock
http://support.apple.com/kb/TS4457
Thanks,
Matt M -
help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?
There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store. -
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
Problem with changing Label in Bridge CS3 and CS6
Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regardsI have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/ -
My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya! -
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
PaoloSomewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations. -
Problems with filling out PDF forms
We have problems with filling out PDF-forms. Aotomatic filling of forms is deactivated and we use the Adobe Reader 11.0.05. The problem is: After some time the inputs are wrong put down in the form. For example: I write 120 and in the form stands 125. We have already extinguished the cache. Thanks for your help in advance.
You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane. -
I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloudfherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.
Maybe you are looking for
-
I have a DAQ Assistant configured to read 2 channels at the same time. When I wire a graph indicator to the output, I see the 2 signals jumbled together. How do I split them up into seperate signals? When I wire any type of indicator it is showing ju
-
User status- when selected it logs date/time & User in Work Not. long text
Hello, Is there a way when a user clicks on a user status on Work Notification the long text will be updated to date/time and username. For example: If we have 3 approval process: Supervisor Approved, Deputy Manager Approved,, and Manager Approved. W
-
I just came from the Verizon store on Ray Road in Chandler, Arizona. My MiFi is 3 weeks old and is locking up after about 5 minutes of use and has never detected 4G when I know 4G is available here in our area. As a matter of fact while in the store,
-
Core Dump admin-server instance in Solaris 10 U5 x86
I have successful upgrade my Solaris 10 x86 u4 to u5. But, the Sun Java System Web Server admin-server unable to start, it produces core files within <SJSWS installation>/admin-server/config. I tried re-install SJSWS, but appear the same problem. All
-
Mail: AppleScript Mavericks: Error cannot recognize newly created Mailbox
Hi! I had a simple apple script to sort my mails into folders. After an update (don't know which exactly) my apple script fails to create local mailboxes in mailboxes. If the mailbox "Archiv/2014" is created, in the next step the script failes to rec