Possible to check  the memory allocation with out given new keyword in java

hi sir !
if it is possible to check the memory allocation. before given the NEW.. and after given the NEW....
and plz suggest me..
thanks

If you can't read and understand the API docs, you have no use for the information.
And most likely, you don't need this information anyway, even though you think you do.

Similar Messages

  • Hi how can i know the memory allocation of occurs 10 or 100

    hii
    experts,
    how can i know how much memory is being allocated for for occurs n(10 ,100)
    for an internal table declaration.is there any tcode to know that??
    plz help.
    thank you

    Hi,
    welcome to sdn,
    Occurs 10 means the internal table allocates space for 10 rows initially....after filling these rows it allocates for the next 10 lines...similarly occurs 100.
    But if you give occurs 0 ,the internal table allocates 8kb space initially...
    these are the major difference....i think you can check the memory allocation of the internal table in the debugging mode instead of using a separate transaction...
    <b>Reward points if helpful,</b>
    regards,
    Jinesh

  • Is it possible to map the cmp fields of the entity bean with out dictionary

    Dear sirs,
    I have created the EJB project module and WEB Module. Now i have to map the CMP fields of the entity bean to the underlying table. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
    I have got some error while mapping an EJB's CMP fields to the table through dictionary. I was actually intended to map 79 fields but it gives an error that more than 64 fields are not allowed while building the dictionary.
    1. Can you tell me what could be the possible reason?
    2. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
    Kindly helo me,
    Sudheesh K S

    Hi,
    Sudheesh please check up if the below link helps,there are other ways of writing the persistent.xml for container managed entity bean.
    http://help.sap.com/saphelp_nw04s/helpdata/en/9b/f695f0c84acf46a4e0b31f69d8a9b7/frameset.htm, probably in the studio you cannot browse through tables not in  the java dictionary,but manually editing it may still solve the problem.
    Also here is another link that specifies the databases supported by J2EE Engine.
    http://help.sap.com/saphelp_nw04s/helpdata/en/66/a5283eeb47b40be10000000a114084/frameset.htm
    The below link shows how to specify the database vendor and datasource
    http://help.sap.com/saphelp_nw04s/helpdata/en/e1/67fc3ee241ba28e10000000a114084/frameset.htm
    Hope you are able to solve the problem.
    Do let us know if you come up with the solution.
    Regards,
    Harish
    Message was edited by: HARISH SUBRAMANIAN

  • How to get the line in the template (smartform) with out using under score

    Hi,
         How to get the line in the template (smartform) with out using under score,
         and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
         Please provide the valueble answer as early as possible.
    Thanks,
    Ravi

    Hi Ravi,
    Line -
    Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
    Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
    For Checkbox - refer link
    Re: Quick Question on Smartforms
    Re: putting tick mark into check box in smartform
    Reward points if this Helps.
    Manish
    Message was edited by:
            Manish Kumar

  • When syncing iOS devices to iTunes, the memory allocations shown in iTunes are all over the place

    There must be threads about this, but apologies for my inability to find any.
    As the title says: I plug my iPhone or iPad into my iMac, and when I look at the memory allocation as displayed in iTunes, 6GB or whatever are free. Then I sync again, and suddenly 8GB are free. Sync again, and now 2GB are free - even though nothing has changed. I get this with both iOS devices.
    Additionally, often what iTunes shows has no relationship to what the device says when I go into Settings: last week iTunes believed there were 0GB in Photos - because after all I had erased them! - but the iPad recorded 25GB, somehow.
    Is this a known issue, or is something screwy with my system?
    Thanks in advance!

    Thanks, but that's not really the issue. I do manage it manually - I've got a lot of smart lists, smart photo albums, and so on, all set up to sync with the iOS devices.
    The problem is that the iPhone/iPad memory, as displayed in iTunes when the device is plugged in, seems to be very inaccurate and variable. When I plug the iPhone or iPad in, iTunes tells me (for example) that, with current settings, 5GB will be free. It syncs, and then suddenly 2GB are free. I sync again - changing nothing, so there should be no change in memory allocation - and suddenly 6GB are free. Somehow, despite syncing no books at all, there's a bizarre 60MB "Book" that iTunes tells me is sometimes on the iPhone, and sometimes not. That little stretch of purple just suddenly appears some days.
    At times it tells me it's too full and can't sync at all. So I wipe, for example, 6GB off the "too full" iOS device, and after doing that suddenly 10GB are free, so I put the 6GB back on no problem. And after I add that 6GB back on, maybe there are 8GB free, or maybe 2GB, or maybe 4GB. In my world, 10GB-6GB=4GB, but iTunes is using quantum arithmetic or something.
    Wiping a lot of photos off was great fun. I had iTunes unsync and remove all photos - so, in that line at the bottom, all the photo memory allocation disappeared. Cool. Mission accomplished. Then I clicked to another tab in iTunes, and suddenly the photo memory jumped back up to 15GB. Looked back in the Photos tab - nope, I'd told it to sync no photos at all. Checked the iPhone itself: oh, neat. 25GB of photos, despite not syncing any. Eventually, after repeating the process several times, all the photos were eventually gone, but the whole process was bizarrely complicated.
    Basically, when I plug the iPhone or iPad into iTunes, iTunes seems to have no idea what the memory allocation actually is - which occasionally makes syncing complicated.
    It's not a giant issue, but it's quite annoying - and I'm wondering if this is just me, or if this is a common issue. I think this issue may also be discussed in some of the "can't delete songs" or "can't delete photos" threads, but some of those threads are so long and cover so many different problems that they're kind of hard to read.

  • I have a an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes. All of the other movies on the card download with out a problem.

    I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
    All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it  just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
    Can anyone please help me.

    The mystery remains....
    Thanks for the pointers. The file type is .mts (a proprietry sony one).
    I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
    The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
    If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
    Thanks

  • How can I get the memory allocation info of a java thread?

    Now I am going to write a program to monitor the execution condition of the java threads. But it seems that the classes in standard edition of JDK does not provide facilities to get the information such as the memory allocation and CPU time of a running thread. How can I do with it? Can I use JNI or JVMDI to get them? If it could do, how?

    Thanks a lot. I just browsed the specification of jvmpi. It is interesting and it seems that I can get the information I need. However, if I want to get the information in my program, I mean, if I want to build a class which may use JNI method to invoke the function written with JVMPI, and then forward the data to other upper layer objects, can it be done?

  • Is it possible to check the previous backups on a certain backup file for the iPhone.

    Is it possible to check the previous backups on a certain backup file for the iPhone. I need to backup and restore the files which were used in the second week of January, but now I am only able to see the latest iteration of the backup. I am assuming that the iPhone backup rewrites on the same set of files. I may be mistaken. Is there any work around to see the old backups? Any kind of help would be seriously appreciated.

    You can use zoom: Settings>General>Accessibility.
    " A simple double-tap with three fingers instantly zooms in 200 percent, and you can adjust the magnification between 100 and 500 percent."

  • Is there a possibility to check the date on which an app was re-installed?

    I am aware of the purchase history which allows me to see when I first time installed a certain app, but when I delete that app from my iPhone then re-install it from the Cloud on another day, say X, the purchase history doesn't help me seeing this date X, which is for me the re-installation date.
    Is there a possibility to check the date on which an app was re-installed?
    Thank you

    I read that you say the content should be deleted, so I still wonder if they get deleted, especially after I have just noticed this;
    Install an App then delete it while it is running in the background. Head to the store again and install it, you will see that the app is still in the background.
    I believe some records of the App exist after deleting it, regardless of who can access them. I will try checking with somebody who has a Jailbroken device.

  • Is it possible to create the memory for a Java object in C/C++?

    Is it possible to have a C/C++ program allocate some memory, then have JNI use that memory for primitive java objects (such an array of bytes) that are passed to Java objects ?
    I would like to allocate a region of memory in C++, then give that memory to a Java object (via some kind of JNI type) and have that Java object fill the memory region with data.
    My impression from reading the JNI API and the few examples I've looked at is "No", there is a strict boundary between C++ and JNI as regards memory management. There may be serious implications as to why what I'm suggesting is not feasible, I am not enough of a JNI expert to know yet, and would greatly appreciate any input/comment.
    Many thanks,
    Colm.

    No, you cannot. However, writing your JNI code you should not use memory of Local Heap (if it possible). Because Local Heap Memory used also by JVM. I have developed tools that generate C++ wrappers for JNI code. In these wrappers I use mainly Global/Virtual Memory. I also reduce to minimum creation of local/global references, as it is affects to JVM memory use. If you are writing JNI code under MS Windows then you can try my tools that automate JNI code writing:
    http://simtel.net/product.php[id]93174[SiteID]simtel.net
    http://simtel.net/product.php[id]94368[SiteID]simtel.net
    Now I am developing this tool for .Net. In two weeks it will be finished.

  • Check the Product Allocation Settings - /SAPAPO/ATPCQ_CHECK

    Hello,
    I have an issue when I use the Check the Product Allocation Settings (TCODE: /SAPAPO/ATPCQ_CHECK), the system returns ''SYST: Period 000 is not valid in financial year variant J1''. J1 is my calendar and I using this calendar for all another Product Allocation Groups whitout erros. I just have this information by system report.
    I sincerely don't no why some groups have this issue because all groups are using the same setup.
    Anybody have any ideia?
    Thanks,
    -Ralph

    Hi Santosh,
    First thank you for help me, following your instructions I have made a investigation and now I know thatu2019s
    another team doing a test with this calendar in R/3, for FI, and really have differences between systems. Your direction are correctly.
    Thank you very much!
    Ralph Veiga

  • How to print the list outout with out getting output?

    How to print the list outout with out getting output?
    My requirement is that when i exicute the program the list output has to print with out getting output list display on the screen.
    if possible cana anyone share the code....
    Phani,

    See this Sample Program.
    DATA: PARAMS LIKE PRI_PARAMS,
          DAYS(1)  TYPE N VALUE 2,
          COUNT(3) TYPE N VALUE 1,
          VALID    TYPE C.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING DESTINATION           = 'LT50'
                COPIES                = COUNT
                LIST_NAME             = 'TEST'
                LIST_TEXT             = 'SUBMIT ... TO SAP-SPOOL'
                IMMEDIATELY           = 'X'
                RELEASE               = 'X'
                NEW_LIST_ID           = 'X'
                EXPIRATION            = DAYS
                LINE_SIZE             = 79
                LINE_COUNT            = 23
                LAYOUT                = 'X_PAPER'
                SAP_COVER_PAGE        = 'X'
                COVER_PAGE            = 'X'
                RECEIVER              = 'SAP*'
                DEPARTMENT            = 'System'
                NO_DIALOG             = ' '
      IMPORTING OUT_PARAMETERS        = PARAMS
                VALID                 = VALID.
    IF VALID <> SPACE.
      SUBMIT RSTEST00 TO SAP-SPOOL
        SPOOL PARAMETERS PARAMS
        WITHOUT SPOOL DYNPRO.
    ENDIF.
    Awrd POints If useful
    Bhupal

  • It's not possible to check the photography box to see it on my PC. How can I see photos on PC?

    It's not possible to check the photography box to see it on my PC. How can I see photos on PC?

    Ah, you had Photoshop 7.0 working, and now it's not.  I see that as a separate issue to updating it.  I'm not sure why it would ask you to update it.
    Do you know whether you have 7.0 or 7.0.1 at this point?  You might be able to do a Properties function on Photoshp.exe and see that info.
    You could make an attempt to reset Photoshop's preferences to defaults.  Press and hold Control - Shift - Alt simultaneously immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set.  If it does not prompt you, you haven't been quick enough to get the keys down.
    Only other thing that comes to mind is to use Windows System Restore to restore back to a restore point where Photoshop was working, or restore from a backup (you do make backups I hope).
    If that fails, and you need to do a fresh install but no longer have the original disk and serial number I'm afraid you may be out of luck.  There's no place I know of from which to download a fresh full copy of Photoshop 7.0.
    -Noel

  • How best to configure the memory allocation

    Hi,
    Anyone could advise how best to configure the memory allocation by setting up
    the value for
    -Xms
    -Xmx
    -XX=NewSize
    -XX=MaxNewSize
    -XX:SurvivorRate
    -XX:MaxPermSize
    for weblogic Express 8.1 and the server has about 4G RAM ?
    Thanks.

    Hi Chandra,
    "Chandra" <[email protected]> wrote in message news:[email protected]..
    Anyone could advise how best to configure the memory allocation by setting up
    the value for
    -Xms
    -XmxSet -Xms == Xmx == 512m
    -XX=NewSize
    -XX=MaxNewSize
    -XX:SurvivorRate
    -XX:MaxPermSizeSet -XX:MaxPermSize == 64m
    and see how it goes.
    for weblogic Express 8.1 and the server has about 4G RAM ?This is way too much for a single weblogic instance. Normally 512-1024Mb
    is enough. I'd consider partitioning it to multiple instances with that much
    of memory. Lesser memory means faster GC.
    HTH
    Regards,
    Slava Imeshev

  • How can I disable the memory sharing with the video?

    how can I disable the memory sharing with the graphic card? it makes me impossible to run a software, grandMA2, on windows 7 installed and run via bootcamp. where should I look for changing the preferences of memory and video, on lion or on windows7? thank you

    so what do you think. I run a software on windows 7 running via bootcamp on my mbp, but I can't open it. the software is compatible with windows 7 on mac. I tried opening it as administrator or changing the compatibility options, like running it as windows xp, and changing the resolution of the video. it can't build the window and then it crashes. on internet I found a compatibility list of the software where it says please do not use any shared memory for the graphic card. what does it mean? I have just to remove the check in automatic graphics switching? what should I try to do? thank you. 

Maybe you are looking for