Possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

Is it possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

user4434301 wrote:
OK...I could be crazy, but I didn't see doing an installation of EBS R12 on a pre-existing 11.1.0.7 DB in there anywhere. It looked like the regular install directions. Are you sure?If you mean to say if you can install R12 with an existing EBS/standalone database then the answer is No.
If you mean to say if you can lay down R12 software (to upgrade from 11i) with an existing EBS database then the answer is Yes.
I hope it is clean now.
Thanks,
Hussein

Similar Messages

  • Oracle EBS R12 - DR setup using Oracle Data Guard

    Hi,
    Our customer has implemented Oracle EBS R12 (12.0.6) on a Two Node RAC on HP-UX env. The application Tier also has Two Nodes(Admin Tier and Web Tier).
    Oracle Clusterware - OCR and Vote Disk are on Raw Devices and the EBS database is on ASM.
    Customer wants to implement a DR solution with Oracle Data Guard with only 2 servers - 1 for the Database Tier and 1 for the Application Tier on the DR Site.
    I would like to know if this could be done by following note: 452056.1? I would also like to know if there are other useful docs.
    Thanks.
    Thiru

    Hi,
    Customer escalated this issue to Oracle and they came up with this reply:
    They can implement Disaster recovery solution from RAC to NON RAC using Solution A which use RMAN utilities for backup and recovery.
    While now AMP Application Management Pack gives the capablitiy to build non RAC from RAC Envioment, In future AMP will be capable also to support cloning of DB with Data Guard.
    Details
    Solution A - Using RMAN:
    For Release 12 customers, you can clone from a RAC to RAC (like to like) or RAC to non-RAC. This is using RMAN scripts to take a copy of the db when it’s in archive mode. if you’re leveraging any disaster recovery tools like data guard, the above solution should work fine…perhaps some fine tuning to the procedures
    Solution B - Using AMP in the future release
    For Release 11i , Release 12.x customers, AMP would be offering a new cloning solution that wouldn’t have dependency on Rapid Clone. This solution leverages the strengths of EM Grid Control in provisioning or cloning targets such as databases. This would be an advance solution that would support:
    o A full-fledged scale down cloning
    o Cloning of EBS deployed on Shared File System
    o Hot and Cold mode cloning
    o Quantifiable reduction in clone time for the entire EBS system
    This solution would be leveraging EM grid Control’s DB provisioning pack’s clone utilities, that are quite advanced and support cloning of DB with Data Guard.
    The recommendation is to start trialing AMP version 3.0, making the purchase and implementing within the Enterprise. As we release the new version of AMP (release 3.0.1), Customer would be in a better position to quickly implement the latest features
    Can anyone let me know if the solution A suggested will work.
    Rgds,
    Thiru

  • Oracle EBS R12 installation problem in Windows 2003

    Hi,
    I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
    All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
    I had downloaded md5sum_windows.txt and also run this command :
    md5sum --check md5sum_Windows.txt > md5sum_result.txt
    In md5sum_result.txt, I am getting error for all files. Error message is as :
    oraAppDB\Disk1\data\driver\Disk1.drv
    : FAILED open or read
    This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
    Edited by: 855292 on Nov 26, 2011 1:58 AM
    A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
    Edited by: 855292 on Nov 26, 2011 2:00 AM

    I have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
    For R12 (12.1.1) you need to download the following files:
    From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
    To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
    Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
    Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
    Thanks,
    Hussein

  • How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

    Hi Every Body,
    1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
    -- I have download all files from e-delivery and check the md5 and all files are OK.
    I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
    2- Was that a problem ?
    -- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
    BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
    even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
    C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
    3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
    thanks in advance.

    Hi,
    Most of the instructions you have mentioned , already was configured.
    except for the tmp and temp directories.
    And even I changed them from System Properties >> Advanced >>  Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
    I attach the conf_VIS.txt file because I thought it may help.
    http://www.4shared.com/document/1bS6aio5/conf_VIS.html
    Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
    Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
    http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
    Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

  • Want to Integrate ESSO with Oracle EBS R12

    Hi,
    I am newbie to ESSO, want to enable single sign on facility with my Oracle EBS R12 using windows logon as primary authentication. Can anyone guide me how to proceed? can I use ESSO to solve this issue? if yes then please guide me with steps to proceed and achieve desired results.
    Reply awaited..
    Regards,
    Priyanka.

    Priyanka Pawar wrote:
    Thanks for your valuable reply.... Gone through documentation and it is really very helpfull. I can now proceed with downloading ESSO and installation of ESSO-LM.
    As it is 1st time i am tring to implement ESSO, is it possible to install it on my Windows XP PC for testing it's working, installation and configuration? Yes. You will need Active Directory or ADAM for storing metadata. ADAM can be installed on your PC too. There's a Deployment Guide in the docs that describes this.
    >
    What about Template creation? should i follow "Template Configuration and Diagnostics for Web Applications" for creating Template for accessing Oracle EBS R12 application?Yes

  • Oracle EBS R12 intalltion on Windows Web Server 2008 R2

    hi ,
    Am planning to install intially oracle EBS R12 in windows web server 2008 R2.
    Is this OS supported by oracle? Did anybody already done this ?
    also later am planning to install OBIA + OBIEE stack on this. will all these
    supported on windows web server 2008 R2?
    Please provide your suggestions.
    which windows version is stable to have EBS R12 + OBIA + OBIEE.
    thanks

    Hi Srini;
    Duplicate post - Oracle EBS R12  intalltion on Windows Web Server 2008 R2
    Dont you have admin right? You could delete duplicate which pretend to open same question more than one place and also it could hold clear to open question interface on main related forum part
    Regard
    Helios

  • Oracle ILM assistant for Oracle EBS R12.1 application with 11.1.0.7 DB

    Oracle ILM through its ILM Agent, which is a database component provides option for data archiving.
    Need to know how ILM agent can be used against Oracle EBS R12 and the options available:
    a. Does ILM assistant map to industry Compliance requirements and can we add or modify based on additional Client requirements
    b. Is this configured for all components and are the business rules (default) taken care in terms of archiving related data, if not what are the options available
    c. What are the options to archive data
    i. On Same and archive database
    ii. Other RDBMS (mysql, or open source database)
    d. Access to archived data
    i. Is archive data available from the existing application or only from backend database
    ii. Does ILM assistant provide options to access archived data (same Oracle RDBMS or heterogeneous database)
    e. Retention options
    i. Does ILM assistant provide multi tier retention options for archived data for different range (# of years)
    Edited by: user9031099 on May 9, 2013 11:00 PM
    Any update on my query please...?

    Limits the Preferred Read-Write Tablespace to only 1 where as in Oracle EBS we would require multiple tablespaces to be Preferred Read Write. Can we extend the functionality of ILM assistant to have multiple Read-Write tablespaces...?

  • How to create a .exe script to start and stop Oracle EBS R12 in Linux

    Hello,
    I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
    Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
    Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
    you help will be appreciated.
    Ali

    I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
    Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
    Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
    you help will be appreciated.Please see these links.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Autostart+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Auto+AND+Start+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Managing Server Processes
    http://docs.oracle.com/cd/E18727_01/doc.121/e13675/T530130T530133.htm#5274555
    Thanks,
    Hussein

  • Oracle EBS R12 for Windows Installation Error

    Hi,
    I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
    FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
    C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
    C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
    "runProcess_4"
    C:\Users\Bing\AppData\Local\Temp>REM
    C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
    C:\Users\Bing\AppData\Local\Temp>REM
    C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
    "Statusstring Configuring Database Technology Stack"
    C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
    Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
    | 0% completed
    / 0% completed
    - 0% completed
    \ 0% completed
    | 0% completed
    / 0% completed
    - 0% completed
    \ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
    C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
    C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
    "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
    C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running Database Install Driver for VIS instance
    SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
    LOCAL : VIS
    ORACLE_SID :
    PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
    LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
    ECHO is off.
    ECHO is off.
    The log information will be written to
         "C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
    ECHO is off.
    ECHO is off.
    Starting listener process VIS ...
    ECHO is off.
    LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    32-bit Windows Error: 61: Unknown error
    LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    addlnctl.cmd exiting with status 1
    OpenSCManager failed
    adsvdlsn.cmd exiting with status 1002
    ERRORCODE = 1002 ERRORCODE_END
    .end std out.
    .end err out.
    AutoConfig Setup Phase
    Running Setup Process 5 of 6 for AppsUtil
    Executing script in InstantiateFile:
    C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
    script returned:
    Sat 06/13/2009
    08:43 PM
    "afmkinit_inst.cmd exiting with status 0"
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    AutoConfig Setup Phase
    Running Setup Process 6 of 6 for AppsUtil
    Executing script in InstantiateFile:
    C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
    script returned:
    Sat 06/13/2009
    08:43 PM
    1 file(s) copied.
    1 file(s) copied.
    1 file(s) copied.
    "afmkinit.cmd exiting with status 0"
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    Skipping Profile Phase
    Skipping Apply Phase
    adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
    adsvdlsn.cmd INSTE8_SETUP 1002
    AutoConfig is exiting with status 1
    RC-50014: Fatal: Execution of AutoConfig was failed
    Raised by oracle.apps.ad.clone.ApplyDBTechStack
    Thanks in advanced,
    Edited by: amorsolo on Jun 15, 2009 9:12 PM

    Hi user3726038,
    I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
    When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
    By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
    In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

  • Oracle EBS R12 DR - Status Column Shows N in FND_NODES

    Hi,
    We implemented DR for Oracle EBS R12 (2-Node Oracle 10gRAC, 2-Node Apps) using Oracle Data Guard.
    During the Failover testing we noticed that the Status shows N for the DB Nodes and First Apps Node. It shows Y only for the 2nd Apps Node in the FND_NODES (Autoconfig was last run on the 2nd Apps Node):
    SQL> select node_name,status from fnd_nodes;
    NODE_NAME STATUS
    AUTHENTICATION
    DRDBSVR2 N
    DRDBSVR1 N
    DRAPSVR2 N
    DRAPSVR1 Y
    But in the Primary Node the Status is Y for all the nodes.
    SQL> select node_name,status from fnd_nodes;
    NODE_NAME STATUS
    HOAPSVR1 Y
    AUTHENTICATION
    HODBSVR2 Y
    HODBSVR1 Y
    HOAPSVR2 Y
    I would like to know what could be the reason for the Status showing N for the DB Nodes and N for 1st Apps Node in the DR env during the Failover Testing. But I was able configure the DR env and bring up the application. Able to Login to the application also. Does the status in FND_NODES matter?
    I did executed SQL> exec fnd_conc_clone.setup_clean before configuring the DR env.
    Regards,
    Thiru

    hi thiru
    I would like to know what could be the reason for the Status showing N for the DB Nodes and N for 1st Apps Node in the DR env during the Failover Testing. But I was able configure the DR env and bring up the application. Able to Login to the application also. Does the status in FND_NODES matter?
    I did executed SQL> exec fnd_conc_clone.setup_clean before configuring the DR env.did you run auto config to populate the tables?
    please confirm you have a clean autoconfig enviornment
    first take backup of FND_NODES and the perform cleaning
    please see
    How to get a clean Autoconfig Environment ? [ID 391406.1]
    AutoConfig Does Not Populate tnsnames.ora With FNDSM Entries For All The Nodes In A Multi-Node Environment [ID 1358073.1]
    Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12[Article ID 387859.1]
    Concurrent Processing - Steps To Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
    Configuring Applications Node Services in Oracle E-Business Suite Release 12 [ID 406558.1]
    On a R12 Multi-Node Install -- Why do all Middle Tiers run all Services? [ID 415385.1]
    ;) AppsMasti ;)
    Sharing is Caring

  • OBIEE 11g with Oracle EBS R12 implementation,Need to know Default Roles

    Hi All,
    Can anyone please let me know regarding any documentation or link where i can find all default OBIEE Group names and the relation of each Groups with Oracle EBS R12 roles and responsibility categorized by the Modules.
    We need the Roles information for the following modules:
    1. Supply Chain & Order Management
    2. Procurement & spend
    3. Finance
    Thanks in advance. Please help.
    Regards
    Sudipta

    Please see these docs.
    Integrating Oracle Business Intelligence Applications with Oracle E-Business Suite [ID 555254.1]
    What documentation do I need to review when installing and configuring a OBI Apps 7.9.6.x environment with EBS? [ID 1221764.1]
    Master Note for OBIEE Integration issues with EBS, Siebel, SSO, Portal Server [ID 1248939.1]
    Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1]
    Oracle EBS integration with OBIEE [ID 733137.1]
    Document for implementing security OBIEE Apps with EBS and Siebel CRM as sources [ID 756851.1]
    What Application must be chosen for Responsibility within EBS when integrating with OBIEE [ID 1246464.1]
    Also, search Steven Chan's Blog and you should get couple of hits -- http://blogs.oracle.com/stevenChan/
    Thanks,
    Hussein

  • How to configure RMAN - Oracle EBS R12

    Hi,
    I have installed Oracle EBS R12 on OEL 5.6 and want to configure Backup strategy for Database. Database Version is 11.1.0.7. Currently Database is in Noarchivelog mode and want to take backup of database using RMAN. Can anyone guide me what are the steps to follow in order to achive that ?
    Regards,
    Priyanka

    You can use RMAN to take backup in noarchive log mode.However you will be able to take cold backup only.
    Use this,
    RMAN> run {
    shutdown immediate;
    startup mount;
    backup database;
    alter database open;
    Note:
    RMAN does not permit you to make inconsistent backups when the database is in NOARCHIVELOG mode. If you employ user-managed backup techniques for a NOARCHIVELOG database, then you must not make inconsistent backups of this database.
    Edited by: user12943013 on Apr 13, 2011 5:20 PM

  • Heterogeneous oracle EBS R12 installation

    To install Heterogeneous oracle EBS R12 ( database is in linux and oracle EBS is on Solaris), we don't know how to proceed. Please clarify it.
    1) Do you have Heterogeneous oracle EBS R12 binaries to install ?
    2) Please guide to install Heterogeneous oracle EBS R12
    Please suggest us, how to proceed with installation of R12.
    Details :
    EBS version : 11.5.10.2 on Solaris 5
    Database version : 10.2.0.4 on linux 5 64 bit .
    Regards .

    Hi;
    This config is called split configuration. Please see below links:
    Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 [ID 343917.1] <search as split
    Using Oracle EBS with a Split Configuration Database Tier on 11gR2 [ID 946413.1]
    Regard
    Helios

  • Oracle EBS R12.1.1 for Windows Installation

    Hi,
    Is there a way to install Oracle EBS R12 for Windows (using the express install) without providing the Unix Tookit Directory, Visual Studio Directory, and the Domain info? I do not know where to get these configuration information. Please help.
    Thanks,

    Hi,
    You cannot install Oracle E-Business Suite 11i/R12 without installing all pre-req. OS software. To get these software packages, you need to contact the vendors (the links are referenced in the document below).
    Note: 761567.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit)
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=761567.1
    Regards,
    Hussein

  • OBIEE 11.1.1.3.0 integrated with Oracle EBS R12

    Hi,
    I have Oracle EBS Vision Instance v R12.1 installed on Redhat 5 and wanted to install OBIEE latest version. Can some please point to system architecture diagram as i am conflicted with installation. I do not have complete idea but writing here what i actually know.
    Oracle EBS R12 on Linux
    OBIEE V 11.X on Linux
    Now install prepackeged analystical function on windows machine and using BI tool deploy/use them with Oracle EBS.
    Please point me to a note which describes the components and what does it take to make up and running in conjuction with Oracle.
    Thanks in advance
    Prashant

    Please see these docs.
    Integrating Oracle Business Intelligence Applications with Oracle E-Business Suite [ID 555254.1]
    What documentation do I need to review when installing and configuring a OBI Apps 7.9.6.x environment with EBS? [ID 1221764.1]
    Master Note for OBIEE Integration issues with EBS, Siebel, SSO, Portal Server [ID 1248939.1]
    Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1]
    Oracle EBS integration with OBIEE [ID 733137.1]
    Document for implementing security OBIEE Apps with EBS and Siebel CRM as sources [ID 756851.1]
    What Application must be chosen for Responsibility within EBS when integrating with OBIEE [ID 1246464.1]
    Also, search Steven Chan's Blog and you should get couple of hits -- http://blogs.oracle.com/stevenChan/
    Thanks,
    Hussein

Maybe you are looking for