Possible to migrate installation w/ SLD to new system using 'tar'/'untar'?

I have a CRM installation with TREX, that I need to move from one unix system to another (same patch level). As SLD is setup, can I 'tar' the entire installation on the old system, 'untar' the bundle on the new system, and bring the SAP setup back into function mode? It should be doable if SLD is not setup. But since there is SLD bundled in the setup, I am not sure if 'tar' is the way to port the installation. I can give the new system the same hostname, but ip address would be different. Any pointer is highly appreciated! Many Thanks!

Hi,
You can perform asystem copy, even SLD can be set up later accroding to your need.
Regards,
Vamshi.

Similar Messages

It is Possible to Migrate Local User Profile to Roaming Profile Using USMT?

Dear All,
1st, I'm following guide at http://support.microsoft.com/kb/142682 to copy user profiles to another user, but the problem is the 'Copy to' button is not active (grey). I try
using 3rd party tools, still no change.
2nd, I try to transfer local profile on the same machine and different user using Windows Easy Transfer, it's work and all of data has been restore to a new user. But not all App Settings is restored, when I open Outlook 2010 and Windows
Live Mail, there's need to enter password again. That is not problem for me.
3rd, After migrate/transfer (2nd step) I want to migrate from local profile to roaming profile, but user profile setting on local profile is not copied to roaming profile, such as Email setting need to create new account but all data is
not problem, because I have already configure on ADUC and GPMC.
My question is:
1. How to copy or move all Application settings on AppData Local folder to roaming profile?
2. How about USMT, it is possible to migrate user profile settings from local to roaming? if is the best tools, how to do this?
Please, advice...
Thanks,
Hendra

First, I dont understand why you're using the copy profile method. I'll make the assumption that you have a domain user account that you you need it's files and settings moving to another machine.
In that scenario then there's a simple guide here:
Migrate User Accounts
For Roaming Profiles and Redirected folders; you can follow the
Infrastructure Planning and Design (IPD) Guide for Windows User State Virtualization (USV).
It sounds like a mouthfull but it actually makes the whole process easy. There's also a video
here.
/Andrew
Blog: http://scriptimus.wordpress.com

Is it possible to migrate data from a 4.6C system to an ECC 6.0 system?

Hello all,
We have an ECC6.0/Oracle 11g system which runs Finance, Purchasing and Payroll/HR for our own organisation.
We also have another 4.6C/Oracle9 system where we run only Payroll for another organisation.
This is a separate landscape (Dev / Test / Prod / DR) which runs on its own hardware.
Clearly, this 4.6C system has to be upgraded in the next 12 months or so before it is out of maintenance.
However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
In this way, we can decommission the 4.6C hardware and simplify our landscape.
Has anyone undertaken a similar exercise who would be willing to share their experiences?
Or does anyone have any opinions as to whether this would even be possible?
Our initial thinking is that we would probably have to write our own conversion programs and/or possibly use LSMW but it's early days so any feedback is welcome.
Regards...John

Hi,
However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
You can make of ALE/IDOCs technology to transfer the required data from 4.6C system to ECC 6.0 system. Here you will need to perform necessary mapping of the fields and perform required technical configuration. Later write ABAP codes to fetch and transfer data .
Hope this answers your query.
Regards,
Deepak Kori

GL Migration from Classic GL to New GL using ABAP code

Dear Experts,
In this scenario, I am trying to develop ABAP Program which will Transfer Documents from GLT0 to FAGL* Table, i want to take opinion about
Is it feasible to update Database Table using ABAP Query(Using INSERT, UPDATE or MODIFY)?
What are possibilities of Database get into inconsistent state?
Any other factors I must consider during this task?
Regard,
Pritesh Raut

Why do you want to reinvent the wheel?
Look at some documentation like
Migration to New General Ledger Accounting (General)Quick Migration for Basic Scenario
1070629 - FAQs: Migration to General Ledger Accounting (new)
Mastering the Implementation of General Ledger Functionality in SAP ERP Financials
Regards,
Raymond

Is it possible to rent a movie on the new iPad using only 4g?

Why do they say u can use the 4g network to download movies when every time i try to it says it's too big and I have to be on a wifi...that's why I got the 4g cause my wifi *****...help please!

http://www.apple.com/ipad/features/ go down to where it talks about the 4g it specifically says, "So you can browse the web, stream content, Or download a movie at blazing fast speeds"

Is it possible to simulate large-scale non-linear systems using the Simulation Toolkit?

Hi,
I am new to LabVIEW, having used Matlab/simulink for a few years. I am trying to simulate a relatively complex non-linear vehicle model. In Matlab/Simulink I would use an m-file to describe the system equations (i.e. x1_dot=..., x2_dot=..., etc.). Is there a similar method in LabVIEW? I have got a simple simulation running using the 'eval formula node', a very ungainly method of substituting variables, and an integrator in a 'simulation node'. It takes about an hour to run a simulation that takes 3 seconds in Matlab. I just need to know if it is realistic to do large-scale simulations in LabVIEW, or if it was not designed for that and I should persuede the management to go
back to Matlab!!!
If it is possible, where can I find help on the subject? I have spent a long time looking on the web and come up with very little.
Many thanks in advance,
Paul.

If these are simple differential equations, easiest would be a for loop with a bunch of shift registers, one for each x1, x2, etc. containing the current values.
In your case, you would calculate all the derivatives from the instantaneous values inside the loop, then add them to each value before feeding them to their respective shift register again.
The attached very simple example shows how to generate an exponential decay function using the formula dx/dt= kx (and k is negative). The shift register in initialized with the starting condition x=1.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DiffEQ.vi ‏33 KB

I deleted my Firefox Sync account at one point, but would like to create a new one using the same email address. Is this possible?

I had a Firefox Sync account a while back on an email address and then I deleted it. Now I want to use Firefox Sync again. I had forgotten that I deleted my account, but after trying to send password reset emails to that address and failing to receive them I can only conclude that the email is still on record in Firefox Sync, even if the account has been deleted.
Is it possible for me to set up a new account using this email address? Trying to set it up through Firefox tells me that the email address is in use, when from my point of view it is not.

Strangely enough, sending the email from account.services.mozilla.com did the trick this time! Thanks.

When I open iTunes on my new computer using the .itl file, and using the same external drive holding the songs, all of the songs I added to iTunes up to a certain date have broken links, while none of the songs have broken links on the old computer.

I want to open the iTunes library on my new laptop with all the playlists and stuff I built on the old computer. I have all my music on an external drive. I have copied the .itl file from the old computer and opened it on the laptop, and it has all the playlists, but all of the songs that were added to iTunes up to a certain date have broken links. What am I doing wrong?

Moving library files around while leaving the data in the same place usually presents no problems. Moving the data around independently from the library usually breaks things. With Windows machines all you should need to do is make sure that the same drive letter is being used on the new system as with the old. If that is not possible you need to get your library into a portable layout before moving it between systems.
Typical layout of iTunes folders:
When the media folder is inside the main iTunes folder as shown above then the library is portable. Typically with a split library the iTunes Music or iTunes Media folder (everything inside the red outline) is moved to a different drive by choosing a new locaton for it and then consolidating.
To make the library portable again you need to copy the library files and album artwork folder into the parent folder of the media folder so that the nested relationship is recreated. (BTW If your media isn't already inside your designated media folder then you will also need to consolidate the files that are outside of it, before you copy the library files.) You can then use the hold-down-shift-when-starting-iTunes method to open the library file in that parent folder. Once the library has been opened, tested and closed you are most of the way there.
The iTunes window inherits its title from the folder holding the library files so, unless you created a folder called iTunes to hold the media folder, iTunes may now have an unexpected title when you run it. The parent folder can be renamed as iTunes, and the library opened again. Alternatively, if the parent folder is at the root of the drive, or has other data which you wish to leave in place, you can create a new top level folder called iTunes and move the library files, album artwork and media folders into it before opening and testing the library again.
If the library doesn't work after any step simply reverse it by undoing a move or rename or opening the previous set iTunes Library.itl file.
If all has gone well then the library is now portable. Once you've migrated the data to a new system you can copy the library files back to their usual internal location if you find that having them on the external drive affects performance...
tt2

I have cs5. It's an upgrade. How do I get it on my new system?

The system I was using it on decide it was time to die, so now I'm trying to install my cs5 on my new system, (using my cs5 disk) and it's telling me I don't have the requirement. (which the new system wouldn't, it's on my dead old system) HELP! what do I do now? How do I get cs5 on my new system? I have the disk, and serial number. Thanks in advance for any help!

Thanks John. Sorry if I sounded crabby, I do apologize. I'm just aggravated about all this. I clicked on that link you sent, I couldn't find a number to actually talk to someone, just sends me to the forums. I did find a link for "Issues when updating the software" I clicked on that and it got me to another link, "error, this serial number etc" , I click on that. It takes me to another page, says to register the product. *it already is and has been for years* then says for me to contact them. I'd love to, but all I've been getting is sent to the forums. Anyways, this last link/page states that I need to talk to a support staff member to enter some code. And that's where I stand.

Migrate Installation Server to NEW Server

Hi,
i want to move our current Installtion Server to a NEW Server but i dont find any information about the procedure to do that. The old Server was a Windows 2003 R2 and the new one is Windows 2008 R2. Has somebody done this before?
Thanks
Hildwin Wonner

Hi Klaus-Georg,
Yes we run the Automatic Workstation Update Service. Thanks for your helpful reply but i have a question.
You wrote:
However in case your client PCs run the Automatic Workstation Update Service, they will still look on the old server, until they have run the first installation/update from the new one.
Do i must do a complete installation from the new Server on the Clients or is it enought to update a Package on the new Server and save them?
Or is it easier to change the Registry because i found this:
Under
HKLM\SOFTWARE\Wow6432Node\SAP\SAP Shared
HKLM\SOFTWARE\Wow6432Node\SAP\SAP Shared\SAP_WUS
HKLM\SOFTWARE\Wow6432Node\SAP\SAP Shared\SAPBI
HKLM\SOFTWARE\Wow6432Node\SAP\SAP Shared\SAPBW
a key named SAPSourceDir with the UNC Path
We use Windows 7 x64.
Best regards
Hildwin

Is it possible to migrate BCM 2003 data to BCM 2010 w/o first installing and migrating it to BCM 2007?

Obviously. I have my BCM built on the Office 2003 Outlook 2003 BCM platform. Now with a change of operating systems and various upgrades including the installation of Office 2010 with Outlook 2010 w/BCM, I seem to have no pathway to import my 2003
BCM Backup. I am now without access to my BCM database information and seriously compromised in my business. Therefore the question: Is it possible to migrate BCM 2003 data to BCM 2010 w/o first installing and migrating it to Outlook
2007 w/BCM?
Thanks Den

The reason I want to use the Back up and Restore process is I really want to retain my original Create Date on my Business Contacts
I will try to answer your questions below:
Question: Is there a URL to download BCM 2007 … I haven’t been able to find one anymore – I saw one a couple years ago but can’t find it now.
As info, I am running this on a Test System so I know exactly how to get BCM 2003 to BCM 2010 with the Create Date intact.
Yes, I have admin status.
BCM seems to work fine after I installed it. I didn’t go through an extensive test though.
What do you suggest I do to confirm BCM is working since I don’t have any data in it?
After I submitted my question to this forum, I tested the Export / Import method of getting my data to BCM 2010.
I confirmed the Create Date is the Import date. Drat!
Then I restored the OS System to the point where I had installed Office 2010 w/ BCM.
Then I Ran the install of the newer version of BCM. It “discovered” there was a BCM version already there and asked me if I wanted to delete it.
I deleted it or the install deleted it … I can’t quite remember.
Ran the install.
OK, here’s some weirdness I noticed:
The Download of the “newest” version of BCM I just downloaded is: V-4.00.12006.00
(KB 2793723.)
When I looked at the version number – File > BCM It stated I had BCM V-4.00.12006.00
This confirms the installation worked.
I ran the Restore from the backup of BCM 2003 and it states it has to convert from 2.03606.0 to 4.0.9812.0.
I knew it would have to do a conversion.
BUT, it states it’s going to convert to version 4.0.9812.0 NOT version 4.00.12006.00!!!!
How did Version 4.00.12006.00
get there?
Which one is the newest one?
Any thoughts??
I clicked “OK” to start the migration.
After a while I got the “Database Migration Unsuccessful” message.
Below are some errors I found in the Event Viewer > Application.
The date on them is about a week before the latest attempt to go from BCM 2003 to BCM 2010.
They are not from the restore I just described because they don’t have the date I ran the latest restore.
Any thoughts??
Event Viewer > Application log:
============================================================
1st Event Error:
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'fulltext_stopwords', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00
============================================================
Event Error somewhere in the Middle of the list of errors.
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'system_columns', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00
============================================================
Last Event Error
============================================================
Event Type:
Error
Event Source:
MSSQL$MSSMLBIZ
Event Category:
Server
Event ID:
15151
Date:
2/3/2014
Time:
6:51:22 PM
User:
N/A
Computer:
TEST-PC-01
Description:
Cannot find the object 'all_objects', because it does not exist or you do not have permission.
For more information, see Help and <place w:st="on"><placename w:st="on">Support</placename> <placetype w:st="on">Center</placetype></place> at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2f 3b 00 00 10 00 00 00
0008: 14 00 00 00 54 00 45 00
....T.E.
0010: 53 00 54 00 2d 00 50 00
S.T.-.P.
0018: 43 00 2d 00 30 00 31 00
C.-.0.1.
0020: 5c 00 4d 00 53 00 53 00
\.M.S.S.
0028: 4d 00 4c 00 42 00 49 00
M.L.B.I.
0030: 5a 00 00 00 05 00 00 00
Z.......
0038: 6d 00 73 00 64 00 62 00
m.s.d.b.
0040: 00 00

Is it possible to migrate the app from latest version to older version

Hi all,
I have a adf application in jdeveloper 11.1.1.4.0.Due to some issues i have to do it in jdeveloper 11g release 2 (11.1.1.2.0).Is it possible to migrate the application from latest version to older version of jdev.
Thanks.

It's not officially supported, but you can try a couple of things - first open the application in the old version and see if it works.
If it doesn't you can try creating a new application in the old version and then use the create project from existing source option to map to your existing code.
This all of course assumes that you didn't use features in the new version that are not available in the old version.

Cant find my iTunes library after migration from old PC to new Mac

Can't find my iTunes library after migration from old PC to new Mac?

Migration Assistant has transferred itunes content, but where is it on new iMac?
https://discussions.apple.com/thread/3358162?start=0&tstart=0 <<< click here for a possible answer.

I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30

I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?

Uninstall and run the Cleaner Tool
Uninstall Creative Suite 4 and point products (Mac OS X)
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Migration of local SLD to Central SLD on different host.

Hello Experts,
We have migrate the local SLD existing on the SAP PI System to a new Central SLD on a different host on SAP Solution Manager system.
I followed the OSS Note 720717, which contains the description of the changes that have to be exectued in the SAP XI/PI Environment, during the SLD Migration. This note does not give any details of the description of changes for the other SAP Systems such as SAP ECC, BI etc registered in the SLD.
Can anyone provide the OSS Notes, SAP Doc URL or the steps on how to migrate the local SLD existing on SAP XI/PI System to the new Central SLD on the SAP Solution Manager system.
Thanks for help in advance.
Best Regards,
Haleem

Firstly
I recommend to avoid having 1 SLD for multiple clients - like Solution Manager, BI, ECC
This is because clients may end up having conflicting requirements for the same SLD
- for example the small user group for Solution Manager may have a flexible and easy going policy on J2EE downtime
- but if you take down the Solution Manager J2EE that houses the SLD and PI uses this SLD - then you could have a severe affect on PI useage
Secondly
Although you can migrate content - this still does not guarantee the target landscape will work
- you may still need to manually re-implement target landscape configuration
let me give you an example
SLD 1 is being moved to SLD 2
Portal 1 is pointing to SLD 1
Even if you migrate the content of SLD 1 - including the ECC and Portal technical system landscape information
Portal 1 is still pointing to SLD 1 - this then needs to be manually re-pointed to SLD2
and that might not be all the complete steps either !
The complete steps of migration from the client side may not be available (I have found only steps to
migrate SLD content not migrate client use of the SLD)
- they may only be available as the documentation for the original configuration steps required to step SLD and the client
- therefore when migrating SLD you must go through the client setup documentation for SLD and check your
target landscape is consistent
Lastly - other considerations include
Lets say you also export model and CIM content from SLD 1 to SLD 2 - this means SLD 2 has an import line from SLD 1
- if you decomission SLD1 then you need to switch the import line which is not recommended - this could cause severe problems and may require you to create a new import line to upload content from SAP /swdc (which you need to keep the SLD bug free and latest definitions)
Just a few thoughts on issues you may encounter
Best wishes
Stuart

Possible to migrate installation w/ SLD to new system using 'tar'/'untar'?

Similar Messages

Maybe you are looking for