Possible upgrade solution for people who have HD and problems in general.

OK, for me, Leopard has been as painful as going osx from OS9, at least the upgrade has been , dunno about the retail copy., bugs, bugs, bugs with the upgrade for sure.
Here is what happens generally., you upgrade and basically you need to run disk tools from a external drive or the Leopard DVD., the problems move on still.
Solution i found was to back up to another drive, that is right guys, spend another hundred bucks no one warned you about., get a external HD or if your living it high and collect macs as Apple assumes you may just have a second Intel mac laying around with a Sata drive in it to start up in "Firewire Target Mode", (hold the "T" at start up)and start cloning your drive with SuperDuper (also need to purchase)..
Ok
1- once you clone your drive (usualy a hour for the base system alone).
2- erase it as one partition,
3- in the options make sure it is set as GUID partition (takes about a hour) and
4- then as well zero out all the data., takes about 2 hours there as well.
5- Now run disk utilities from the Leopard DVD or the computer or booted up drive you used to do all this., if you can not fix permission of th volume you seen to reformat the Drive again 7 pass!, could take 4 hours.
Finally you will be able re clone it, and run disk tools after a days work no one warned you about.
*This disk utilities operation may take about 1 hour but say 11, and look like this below;*
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/English.lproj/DisplayName.stri ngs", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/thumbnail.png", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/top.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/English.lproj/DisplayName.strings", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_letter.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_pattern.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/English.lproj/DisplayName.strings ", should be 80, group is 99.
*Good luck*
*My ADVISE:* if you experienced these problems, as above, reformatting by zeroing out the data works. as for those who want Leopard. *DO NOT UPGRADE but install a RETAIL version of LEOPARD* until apple has a update,
I read posts where people who have the retail copy (full DVD) have not experienced these problems, mine was a upgrade from Tiger since i got a mac in the last 30 days.
WARNING: it has been hard to trust Apple fanatics with these things now days, many posts are denials to things not working so i could be wrong there as well, been honest saves time is all i can advise them.
If anyone has beter advise please do post it.

And what is yaml all about, shows up in disk utilities for hundreds if not thousands of issues?
showed up as a user as well.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/proxybasicauth-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyAuthenticator/cdesc-ProxyAuthenticator.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyBasicAuth/cdesc-ProxyBasicAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/cdesc-ProxyDigestAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/check_uri-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/cdesc-UserDB.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/get_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/make_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/set_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPProxyServer/cdesc-HTTPProxyServer.yaml", should be 0, group is 99.
------------------------------------------------------------

Similar Messages

  • Traded in my iPhone for a different brand of phone. I had no idea that I had to sign out of iMessage before doing this. Now, my old phone is gone and my new phone cannot receive texts from people who have iphones and had me as a contact before. They try t

    Traded in my iPhone for a different brand of phone. I had no idea that I had to sign out of iMessage before doing this. Now, my old phone is gone and my new phone cannot receive texts from people who have iphones and had me as a contact before. They try to send an iMessage and I have no way to receive an iMessgae now. On some server somwhere my AppleID still tells people they should send me iMessages. What is the solution to this issue? Deleting my AppleID would work to solve this issue, but I cannot ever delete the ID? What can Apple do for this?

    If you did not erase your apps and data before getting rid of your old phone, try using Find My Phone and erasing everything remotely. See if this works.

  • For people who have had it die due to sweat - how did you have it?

    The title is basically my question. For people who have had it die due to sweat, what orientation/where did you have it? I'm just wondering if all the claims are from having the open adapter slot face up, where sweat would easily drip into it.

    @WalleWalle you are brave. Try drying it out in the sun or in some rice, and don't turn it on for a day or 2. The best thing to do would be to take it apart right away, disconnect the batter and wash the circuit with DI water, but that would be very difficult!

  • In the name of hearing loss and equal access, there needs to be a balance control for people who have decreased hearing in one ear only. It is STILL not available in itunes YET, despite MUCH clamor. WE NEED BALANCE/Pan/L-R control!

    OK, there's been complaining about this for YEARS, and now I have a relative who has extreme hearing loss in one ear (not deaf) and usually compensates by turning up the balance on her speakers/ipod to the left or right side in order to compensate.
    Also, as a musician and a guitar teacher, I make teaching audio tracks that have a particular part on the left or the right side only, and which needs to be "muted" by panning to the opposite side, then the student can play to the backing track without that part. Of course, then they can adjust the balance back and check themselves. This is also done with a LOT of jazz teaching exercises, etc...
    Apple-PLEASE give us an elegant, easy to get to way of adjusting balance WITHIN ITUNES. Most of us us professional grade equipment and sound interfaces, and care deeply about the quality of sounds we make. we do NOT want to have to keep going into Prefs in order to adjust balance, and a LOT of high end sound interfaces don't allow that anyways anymore.
    PLEASE PLEASE PLEASE fix this Apple. It should be easy, it should be done in the name of compassion for those with one sided hearing loss  if for no other reason, but I've outlined other reasons to do it as well.
    AND I'll repeat this for the people who won't read what I wrote---WE DO NOT NEED TO BE TOLD TO "ADJUST IT UNDER PREFERENCES"---that defeats the point of having a simple solution, and it certainly won't work on an ipod.
    HELP! You guys can fix this IMMEDIATELY if you will just DO IT! I cannot stress how important it is to the music community as a whole...
    Why has this not been done before now? Even the cheapest, sorryest stereo receivers, players, etc., in the world have ALWAYS had a "balance" control along with a "bass" and "treble" even at their simplist. Its PAST time for iTunes to become something better. WAY PAST.
    AND AGAIN---DOING IT THROUGH PREFERENCES IS NOT POSSIBLE FOR THOSE OF US USING "REAL" INTERFACES or playing on a iPod, etc...

    -> Feedback and Suggestions.

  • My observations ( for people that have indexing and connection issues )

    Since cisco takes an awful lot of time doing anything about these problems i decided to investigate the box myself today.
    I followed advice from various threads and did some digging aroudn with network traffic snoopers and some other tools.
    First ( and this is buried somewhere deep in the documentation ) you can NOT have ANY file or folder name that is longer than 32 characters. This is a limitation of the stupid linux they are running on ! If you have a file with longer name or foldername it may screw up the indexing.
    Second : file and path names can only have alphanumerical characters and numbers and spaces in them. DO NOT USE ANY other character. it messes up the indexing  I had folders named -= folder 1 =-. they never got indexed. as soon as i removed teh  -= and =- the indexing kicked in .... This is again a twonkyvision / loonix problem
    The box has tremendous problems with ghost devices on the network. I have on my network at home : 4 pc's running XP ( some pro some home edition )  2 laptops with Vista. One box with Win7. One Windows home Server. One linksys Skype phone , One Roku soundbridge, one Dlink DNS323 , one ADS network drive , one Simpletech Simplestor , A HP color laserjet , a Hp 6250 , 7650 and some other HP network printer. Thru the wireless link my PDA ( iPaq) and iPhone connect once in a while too. My blu ray player is also hooked up (netflix streaming). And then there are various experimental systems ( i am an electronics engineer and i have built some gadgets that are network connected that allow me to remotely turn on lights monitor temperature etc. )
    Now , the NMH does not detect correctly most of the devices. It keeps on trying to feed information to the printers ... it also tries feeding information to other NAS devices as well as to the Windows Homeserver ... It falsely identifies one of the printers as a dlink ethernet connected dvd player ...
    It also has problems with devices that use static ip addresses on the network ( i set up the printers and other NAS devices with hardcoded ip addresses. so no dhcp )
    So here is what i did : go to twonky configuration ( port 9000 see tony's article )
    Step 1 : Yank out the ethernet cable to ANY OTHER DEVICE except the pc you are working on , your router and the NMH <- this is important
    step 2 : Hit the button to erase all the devices it discovered.  (reset list)
    Step 3 : hit the SAVE button
    step 4: UNCHECK the box next to the 'reset list' button
    step 5: hit the SAVE button
    Now , on the left hand side click on Maintenance
    Click on ALL checkboxes under Log level. they should ALL be checked
    Hit the Clear Logs button
    Hit Save changes
    Hit RESTART server. you wil get a file not foound error page. you will see in your browsers titlebar that the url changes to an ip address with some text behind it. remove all that text and key in :9000 and hit return. it will take you back to tonky. ( i don't know how important this step is , but i did not go in throught the device name , i used the ip address from this point on. normally it should not matter but you never know ( i have a suspicion i will explain later )
    Write down this IP address. it is usefull to know.
    Now since we are back in wonkyvision ( stupid half baked program ) Go back to the maintenance screen.
    now hit the rebuild databse button.
    You should hear disk activity now.
    Hit the Show log  button once. the log files should open.
    you can refresh this screen by hitting the reload button in your browser.
    you should see messages fly by like
    21:14:40:317 LOG_SYSTEM:fsmon_add_watch inotify_add_watch (12, /share/media/photos/Moorea May 1998) returns 2045
    21:14:40:317 LOG_DB:watch wd=2045 added on /share/media/photos/Moorea May 1998
    21:14:40:379 LOG_DB:upnp_folder_watch_add_dir /share/media/photos/Moorea May 1998/New Folder
    thnis means it is probin the entire directory structure and adding files and paths.
    Let it run for a while. hitting refresh on your browser once in a while. it took a couple of hours on mine ( 76000+ pictures ... ) and a couple of hundred songs + some videos.
    once disc activity ceases : go back to twonky port 9000 , go in to maintenance and hit Clear Logs button.
    HitSave button
    Hit restart server. you will again get an error page. get rid of the rubbish behind the ip address.and key in :9000
    go to the clients and security page.
    Make sure Automatic discovery is still turned OFF ( if it is on you will see in the logbooks that it attempts several times a second to connecto to anything it can find. Since the detection process is flawed it bombs out. this may overload the poor cpu in the NMH... )
    Hit the reset list once more
    hit save
    Now turn automatic discovery on and hit Save.
    go back to maintenacne and hit restart server. again on the error page : erase the garbage after the ip address and go back to port 9000.
    if you now go back to client/sharing page you should see 2 possibly 3 device. one is your router , one is the pc you are working on, and the last one is the same ip address as you see in the browser. ( the ipaddress you are using to talk to the nmh )
    make sure all the checkboxes before these devices are checked. and hit the save button once more.
    at this point i unchecekd the automatic discovery and hit save once more. i go back to maintenance and hit restart server for the last time.
    At this point the nmh restarted twonky and immediately there was a ton of disc activity. i opened the normal nmh user interface and lo and behold : the green spinning arrow started to move and progress was going forward. it increased 1% roughly ever 10 seconds or so. when it finally hit 100% everything was there. as it should be.
    Now. speculation on my part
    - this thing has trouble with long file names and non alphanumerical characters.
    - this thing has trouble with device it incorrectly identiefies or cannot identify. this screws up wonkymedia.
    - the communication between the process on the NMH (that serves the flash user interface running on your browser ) and winkymedia is going through a network port itself. There are problems. thye do not do inter process communication but go via network messages... ( this is kind of dumb as it loads the network... )
    proof :
    21:01:03:625 filescanner thread started
    21:01:03:628 LOG_SSDPSDP_notify_packet ### SSDP sending:
    NOTIFY * HTTP/1.1
    HOST: 239.255.255.250:1900
    CACHE-CONTROL: max-age=99999
    LOCATION: http://192.168.1.66:9000/DeviceDescription.xml
    NT: urn:schemas-upnp-org:service:ContentDirectory:1
    NTS: ssdp:alive
    SERVER: Linux/2.x.x, UPnP/1.0, pvConnect UPnP SDK/1.0
    the filescanner sends messages through network port 1900 to the NMH. Since the filescanner is running on the NMH ... i also have no clue what 239:255:255:250 at 190 is ...
    i also see sometimes the following messages fly by
    21:01:03:894 [Error] - LOG_HTTP:HTTP_get_header Cannot receive header, clientSocket=13, nBytesReceived=0
    21:01:03:894 LOG_HTTP:HTTP_send_receive received no header in HTTP_send_receive, propably client closed socket, URL=http://192.168.1.66:9000/
    my suspicion is that , since the various processes running on the NMH ( the indexer , the UI server and all the twonky processes) all intercommunicate through the network port , this is a problem. if the network settings get corrupted ( because false identification , notwork overload or whatever ) the thing jams up.
    by cleaning out all the false identieis , letting it identify itself ( important for its own process communication ) and a pc , and then turning off the detection .this solves that problem.
    limiting the filesstem to 'clean 32 char max' names solves another problem.
    I also see a lot of keep-alive message fly by on the netowrk ( several a second. )
    i eventually plugged in my other computers and the roku , let it autodetect for a while and turned this feature back off. Then i plugged in all other devices the NMH has no business with.
    So far it still works fine.
    I still do see a ton of messages fly by where the NMH is probing the network on existing devices. tey come back with 'device already validated
    21:01:04:140 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.1.76)
    21:01:04:140 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.76, mac=
    21:01:04:140 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.76)
    21:01:04:141 LOG_CLIENT_DB:Ignoring client with fixed flag = TRUE (ip=192.168.1.76)
    ( .76 is the pc i am working on right now. )
    i don't know why they keep probing. i am not streaming anything and auto detect is turned off ..
    anyway i will keep you guys posted on how this evolves.
    One thing is for sure. this is another half baked ' broken source' based system.

    further observations :
    22:24:31:868 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.66, mac=
    22:24:31:868 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.66)
    22:24:31:869 LOG_CLIENT_DB:HHetting client adaptation to 49 (ip=192.168.1.66)
    22:24:36:878 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.1.66)
    22:24:36:878 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.66, mac=
    22:24:36:878 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.66)
    22:24:36:879 LOG_CLIENT_DB:HHetting client adaptation to 49 (ip=192.168.1.66)
    22:24:37:926 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.1.76)
    22:24:37:926 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.76, mac=
    22:24:37:926 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.76)
    22:24:37:927 LOG_CLIENT_DB:Ignoring client with fixed flag = TRUE (ip=192.168.1.76)
    22:2
    thisnthing keeps on probing itself ... i wonder why. (.66 is the NMH  .76 is my pc ... ) it is also strange it cannot retrieve its own mac address....
    Oh , you can turn off the logging features again when done. it only takes time and diskspace on the NMH
    And before i get flamed : the comments i make about 'broken source' : i have no gripe with linux. I have a problem with companies that grab a bunch of stuff that is free ,slap it together, sell it for a lot of money and give no support to the people that bought it. They want all the money for no effort .. they turn open source into broken source ...

  • 10.5.3 update -A possible solution for those who have hard spinning fans!!!

    Hey people!
    I've been diggin around the internet for a solution to this problem... I couldn't find anything at all till I started to mess with my macbook around... I tried to reindex the spotlight by deleting the previous indexed list of files with an app called "spotless" but nothing happened. I even tried to reset the SMC - system management controller - but still nothing happened... I tried some other things out but I had come out unsuccessful TILL... I remembered myself to try all this out in safe mode....
    This was so far the strangest thing I've ever experienced on a mac... by entering in safe mode the fans just started to ramp down and my laptop returned to what it used to be! Just that - entering on safe mode! After entering and after listening to the fans loosing speed, I rebooted in normal mode and my laptop was healthy again!
    To start up into safe mode (to "Safe Boot"), do this:
    - Be sure the computer is shut down.
    - Press the power button.
    - Immediately after you hear the startup tone, press and hold the Shift key.
    Tip: The Shift key should be held as soon as possible after the startup tone but not before.
    Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    P.S. - if you get lucky with this procedure just reply me and spread the word!
    Good luck!
    Rui Caldeira
    Message was edited by: Caldeira

    Actually... it really solved the problem for me! My computer have sounded like a jet plane for the last couple of days. But I'm not sure if the only solution is to boot into safe mode. I recommend you to do like this:
    1.) Remove the spotlight indexes and disable the service if you don't use it. You can use Spotless to do this. You find it here: http://mac.softpedia.com/progDownload/Spotless-Download-9834.html
    2.) Reset the SMC. Om a MacBook, you turn the computer off and remove AC and the battery. Hold the power button for about 10 seconds. Insert the AC but NOT the battery and boot the computer. Shut it down and install the battery.
    3.) After the SMC reset, boot the computer into safe mode by holding the shift key during boot up.
    4.) Let the fans spin down in safe mode for a couple of minutes.
    5.) Restart the computer into normal mode and the fans should now be spinning normally again!
    This worked for me, but only in the order above!
    /D

  • I have a question for people who have ordered personalized iPods online and picked them up at a Retail Store

    Is it possible to be credited in-store for recycling an old iPod even if you were already charged in full for the new device at the time of purchase?
    The difference between "yes" and "no" is about $30 and if it's "no" then I'll definitely forego the engraving, as much as I'd like to have it done for my intended 5G purchase (that is, assuming that Apple ever gives us an actual retail date).

    Firstly, the CS3 Design Prem comes with Photoshop Extended CS3, Illustrator CS3, InDesign CS3, Dreamweaver CS3, Acrobat Pro 8 as well as Bridge and and Vesion Cue.
    Secondly, has the packaging been opened? If so, it could still be installed on a PC or rather Macintosh somewhere. If so, this makes it a trickier proposition with regards to installing it yourself or selling it on.
    Don't quote me on this, but if the software is fresh and unopened or has been deactivated, you could upgrade to Design Prem CS4 Mac and then crossgrade to Design Prem Windows. Don't know if it's possible to crossgrade and upgrade in one fell swoop from Mac to Win. I suspect not - but will be happy to be proven wrong.
    Hope this helps.
    Ian

  • Is family base for people who don't have kids?  can I unscribe from family base if I find i don't need it at a later time?

    Is family base just for people who have kids?  Can I un subscribe to it if I don't need it later on?  I only want it to block un wanted calls.
    Thank you
    Bettie

    Horlacher, we want you to subscribe to only the wireless tools that you need. Family Base allows you to monitor your usage and set limits on usage for data, messages, calls and purchases. You also have the ability to block incoming calls and text messages, as well.
    For more details regarding Family Base, click http://vz.to/1AdYFWU
    LasinaH_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Providing archival folio for people who bought subscriptions

    Hello,
    I have a kiosk in which each issue has a fixed in-app price. Also, I would like to add to the kiosk possibility to buy an annual subscription for all the issue for next year, but that does not give me the opportunity to download all the previous folio, with a subscription. Is it possible, with the Adobe DPS Professional suite, to provide free archival issues for people who have bought an annual subscription? If not, what is the easiest way to do this with the version Enterprise, with minimum of programming.
    Regards,
    Tom.

    There's no option to "switch subscriptions".
    You would have to:
    1) Cancel your subscription: https://support.skype.com/en/faq/FA1881/how-do-i-cancel-my-subscription
    2) If you haven't used the subscription you can request a refund: https://support.skype.com/en/faq/FA12147/when-can-i-get-a-refund
    3) Buy the correct subscription
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • APPHANGB1 when browsing the web, or just keeping it open. Happens once in a 5 minutes, and it freezes for 30 seconds. I found many people who have this problem too ....

    APPHANGB1 when browsing the web, or just keeping it open. Happens once in a 5 minutes, and it freezes for 30 seconds. I found many people who have this problem too ....

    Odds are only someone that develops apps for iOS would have access to whatever this is and, even then, this information may still not be available.
    I would do a backup of your phone & then erase it and restore from the backup to see if the odd behavior goes away. If so, something went funny with your update the first time around. If not, there's something in your backup that's making the phone throw a fit.
    I resolved my battery issues (more or less) by disabling the "set date/time automatically" setting. I haven't re-enabled it yet but my battery life has been much better with it off.
    ~Lyssa

  • I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

    I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

    I foolishly downloaded OS8 on my iPhone 4S. It not only greyed out my wifi button making it impossiblr to use wifi, but bluetooth connection doesn't work either. I reset the phone to factory settings but that did nothing apart from loose all my photos and contacts. OS 8 was still on after too. Apple say it is a problem but the download only brought the fact the hardware was faulty to the fore, but not being under warranty , the repair would cost £166 that I would have to pay. Totally unacceptable. If the problem was known and they knew it would cause problems on older models, why have it bob up on iTUNES for download.
    Don;t download it guys, APPLE aren't admitting culpability and it will cost you a fortune to put right!!

  • I don't have a credit card to enter in too App Store . I never had to have one befor to buy aps befor so why start it now it's so stupid for people who don't have one or don't want to put there private details on here

    I don't have a credit card to enter in too App Store . I never had to have one befor to buy aps befor so why start it now it's so stupid for people who don't have one or don't want to put there private details on here

    How to Get Apps From the App Store Without a Credit Card
    http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/ts5366
    If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/HT1918
    iTunes Store Accepted Forms of Payment
    http://support.apple.com/kb/HT5552
     Cheers, Tom

  • To the people who have N96 device

    to the people who have N96 device, does anyones naviwheel is working? and do you have the square thingy next to the battery? and how do you call that anyway, and what is that for?
    plz reply..
    Solved!
    Go to Solution.

    im sorry about the square thingy. what i was thinking awhile ago was my old cellphone the nokia n78. and that square thingy one was kind of look like a "simcard" and located on the side of the battery bar on the upper right hand side of the screen.
    and from what i remember when i used to have that phone even if i wasnt using the WLAN, that square thingy was just stay there.
    sorry guys for my ignorance, i was just curious.
    plz reply....

  • Can't SMS people who have gone overseas and then come back - weird!!!!!!

    I have a problem with my texts when OTHER people go overseas. When they come back from overseas they can text me but I can't return their text. This has happened 3 times now with 3 different people. I have tried deleting and adding their number and entire contact again, added and deleted the +61 before their number.
    One of the people's text came to me from their @icoud name but they were actually sending it from their phone and the phone setting said they had sent it from their actual telephone number.
    When i tried to reply it bounced back but when I returned text to their @icloud address it went through as a normal text and ended up their conversation thread from me.
    As I mentioned its only happened to people who have been overseas and then come back to Australia.
    Very confusing - any ideas anyone.
    thanks Craig

    Sorry it took me so long to write back, But unfortunately this didn't help my issue.
    My uncle and I did a lot of tests on this computer and have narrowed down the location of the problem a little bit.
    We tried to first reset the SMC and the NVRAM as suggested, but the only thing that did was make the fans run on full tilt for the first session after restarting it for some reason. After that we tried re installing OSX over the OSX that was already on the system (not removing any of the files). This also didn't do anything but make refit stop working. Then we moved onto the next task at hand by removing the hard drive entirely and booting it as an external drive from one of the USB ports... as long as you booted it with the options key held down, it worked perfectly fine. Then we put an alternative hard drive into the computer and installed OSX on that. This time there was no trouble booting anything up. Everything seemed to work flawlessly. So we made a backup of my original drive (OSX, Windows, and all) onto an external hard drive and tested booting to it via USB. That again worked perfectly fine and booted right up with no problems. So after that we formatted the original hard drive and reinstated OSX. We then proceeded to transfer all the old files from the backup onto this new installation and LOW AND BEHOLD..... we were back to square one with it refusing to recognize the hard drive again.
    So this basically told us that there appears to be something either wrong with the hard drive, or something got really screwed up in the software along the lines and by me copying all my old files back over, I just ended up bringing the screwed up file back over with it! (despite not copying over any settings of any kind) So I am still extremely confused as to what is going wrong... did some boot sector possibly get screwed up may be?

  • With iOs 7 and the iPhone can someone use the phone while also using a communication app such as Speak It or Assistive Chat? These are text to speech systems for people who cannot speak well. Thanks you!

    With ios 7 and the iPhone can someone use their phone while also using a text to speech app, such as Speak It or Assistive Chat? These apps are used by people who have difficulty with speech production.
    Thank you.

    My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
    I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the  iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
    The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
    Once I completed both restores, the sync with iTunes worked fine.

Maybe you are looking for