POST ANNA - Calling / Messages Issue

Anyone can help on this?
When receiving an incoming call on my Nokia N8 (after updating to ANNA), the caller's name is not being displayed but only the phone number. In my phonebook, all my contacts have numbers with my country's international code as prefix (i.e.. +XXX). If I remove the international code from a contact, the caller's name is being displayed but then, in doing so, I have an issue with text messages whereby now the sender's name is not being displayed. I always used to have international code in all my contacts' numbers and everything was fine prior to ANNA update. I also DO NOT have duplicate contact numbers in my phone and I am using ONLY phone memory. My wife's Nokia C7 is not having this issue after the upgrade. However, I noticed that the following 3 apps are no more on my phone: Conversation Appl, Conversation Server and Messaging whereas same are still present in the C7.

Same here - contact name fails to appear and contact-ringtone fails to sound when I'm called by that contact.  Phone is C6-01, Anna 025.007.00.01 2011-09-16, fully updated except for unused "Social"  App which is factory default.
I've tried fiddling with how the number is listed in the contacts (+, country-code, area-code included/excluded), none of it worked.
This is a basic feature of a smart phone - please send us a fix, Nokia!

Similar Messages

  • Post Anna browser issue

    After loading Anna, the native browser will not open for more than a mere flash of the browser screen, then closes itself.  What's the problem and what's the fix.  Has anyone else experienced this?  If I can't get this damn post Anna N8 figured out VERY soon, I'm bailing for a high end Samsung or HTC Android.  Thanks for any suggestions

    ABernal wrote:
    fardawg wrote:
    After loading Anna, the native browser will not open for more than a mere flash of the browser screen, then closes itself.  What's the problem and what's the fix.  Has anyone else experienced this?  If I can't get this damn post Anna N8 figured out VERY soon, I'm bailing for a high end Samsung or HTC Android.  Thanks for any suggestions
    I have the exactly same issue, I have to use Opera but its not flash enabled
    I hope they fix this in the next Belle oficial release
    Make a backup of your phone, and then do a hard reset, by entering the code *#7370# on your phone. If a security code is being asked enter "12345"

  • Video Message Issue

    Hello, guys! I have a bit of an issue with the new video message feature of Skype. That is, the option to send a video message is grayed out on every contact I have on Skype, but my friends can send me video messages and I can view them without any problems.
    Skype version: 6.21.59.104 (searching for updates yields me that I have the latest version of Skype)
    Operating system: Windows 7 Home Premium Service Pack 1 (100% legal)
    Camera: Turbo-X 1080P Full HD with built-in microphone (functions perfectly during video calls)
    Internet Speed: Average of 100Mbps if I remember correctly. Fairly fast and functional 100% of the time (I don't know if it is relevant)
    Note: I have no Facebook or Live contacts on my contact list. I do not log in as Invisible. Some of my friends do, but the option is grayed out for everyone, not just those that are Invisible. The only personal modification I have done for Skype is to block the advertisments by blocking access to apps.skype.com through my Control Panel.
    Solved!
    Go to Solution.
    Attachments:
    video message issue.jpg ‏22 KB

    Wingmom23 wrote:
    It seems that everything you are telling me to do about video messaging is not working.   Even going to the Help, About to check for the latest version of Skype is not working.   I downloaded the latest version just in case.   I want to send a video message but the instructions tell me to 1. Click on the contact and then 2. Click on the plus sign.   When I click on the contact, I do not get a plus sign.   I get a dialog box that has a paper clip beside it.   I click on the paper clip and it has the "Send Video Message" there.   I click on that and Skype tells me there is a problem.   What do I need to do?
    Help please.    Thank you.
    Most likely you are on the new Skype version with a different design of user interface.
    http://blogs.skype.com/2014/12/18/here-are-the-skype-for-windows-layout-changes-that-you-requested/
    Please,  run the DirectX diagnostics tool (32-bit option).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • N8 Anna browser differences / issues?

    A couple of things I've noticed since the Anna upgrade, WRT the browser.
    1. When entering text in text windows for some forum posts (it actually works correctly on this forum, but on others I read / post to) the newline button doesn't add a line break. It did using the browser in PR1.2, can't remember the behaviour in PR1.1.
    2. When using the PR1.2 browser, I used to double tap on the screen to zoom, which worked very well. This seems to work quite differently in Anna.
    Both are notable issues / irritations for me. I suspect 1 is a big / issue - whether 2 is expected or planned behaviour, or not, though I'm unsure.
    Truth be told, I've not found anything hugely positive about the upgrade to Anna - all it's brought me is irritations in the differences or things that work differently. Performance and stability seem the same to me - which is to say that it's been good before and after Anna. The difference in look and feel just makes me feel meh. I don't mean to be overly critical, I kind of expected more from it, really.
    My N8 (admittedly this is my 2nd - first encountered the bug where it won't charge, nor turn on) has been well behaved, performs well and is stable. Main irritations have been with things like WiFi access being, well, unreliable and flakey - and seemed to be best served with scanning turned off, and WiFi power saving on. Post Anna, that hasn't improved, WiFi is still flakey, and not fully reliable (and there is context, there, I've got plenty of other WiFi devices that are stable, including other mobile phones).
    Photo viewer no longer picks up on all my photos any more since Anna (I'd have to move other folders, that worked just fine before Anna). Browser I've not found any benefits, and merely negatives. Portrait qwerty  means nothing to me, as I find the landscape one tricky enough to get key presses accepted accurately. Video player seems no better (still no bookmark facility).
    3.06 of maps seems the golden release - every beta since has been awful, one way or another - too much removed or configuration options removed, and the app dumbed down (3.08 betas). I've tried 3.07 and both 3.08 releases and in all 3 cases have reverted to 3.06 once I became sufficiently irritated that functionality that I wanted or wanted to configure better had either been removed, or was no longer configurable.
    Not sure what's going on with N8 software, but I'm considering imposing a software freeze on myself, because it seems that newer releases are doing nothing more than irritating me in not addressing things that need addressing, and merely tweaking look and feel, and dumbing everything down to make it less of a well usable device.

    laffcarl wrote:
    Well put
    Another Browser issue entering text into forums, that has stopped me using one of the only sites I used to frequent before 'AnnaUpdate!', has the strange effect of sending a line of 'Question marks and maybe the odd square box? (Have tried all font settings)
    Also the ?'s and square boxes don't add up to the characters in the message i.e.. a 50 character message will be sent as may be 10 ?'s or sometimes just a few. The annoying thing about it is, it looks fine before and as you send it, but when you look at the message you have sent it's as described and rather sinister looking for the recipient lol.
    One step Forward-Three steps Back!...dont even start going on about the flash player lmho...What I need is to be able to butcher the N8's camera into my old N95 then there would be no problems
    £400 odd quid for a 12 meg nokia camera, you can get an SLR for that money....But hey wait..."You can't browse the web with an SLR!!"...Oh it's OK, you can't browse it with Nokias Flagship either lmao
    *Shakes head in disbelief*
    Here's the thing - I'm not a hater - I'm not just looking to bash Nokia. Personally, I'm drawn to their handsets because for me, OVI / Nokia maps is a killer app for me.
    All the same, though, and it does really irritate - key things people have been complaining about, still not fixed. Basic functions that people have been wanting from various normal apps not implemented. Yet Anna looks a bit more funky.
    Same with the mapping betas - well actually worse - 3.06 for me seems to work very well - practically all the key things working quite well. Not perfect, and certainly could be enhanced.
    But the recent betas have been awful - ripped out functionality, removed configuration options, dumbed down functions - but again, it looks more funky. But it all just leaves me with a big "So what?". The newer versions simply don't work as well, are not as capable, and all with some dogmatic opinions expressed as the rationale behind why some things have been removed, some options removed, and some bugs not addressed.
    If they'd just focus on getting the stuff that doesn't work well, to work, in the process not remove good features or configuration options that many will want to use, THEN - if they have the time - update the visuals, then fine. But I'm sick and tired with the focus on form over function - it's making me question my entire reason for sticking with Nokia handsets - their mapping app - and I don't want to be told that mapping on phones is due a paradigm shift - I just want it to work well, with the maps updatable and relevant.

  • Nokia 301 Feature Request: Missed calls/messages n...

    Hi,
    I just bought a Nokia 301 dual sim phone. I'm satisfied with it except one thing - IT DOESN"T HAVE MISSED CALLS/MESSAGES NOTIFICATION. How come such important and basic function not implemented? No one will check his phone regularly and there is no way to know wether I have missed calls or messages. It should keep making a beep until I read it. I believe this function could be implemented easily in software, even by polling the status at a constant interval or setting up a counter which issues interrupts. Any Nokia staff can answer this questtion?
    Thanks.
    Leonard

    This is a feature which the majority of phone users do not want, and that's why Nokia phones have not done it since the early 2000s when Nokia phones used to beep the morse code for SMS.
    There are two primary reasons why a person might not read a message at the time it comes in:
    He didn't hear it, maybe he was in a noisy place and didn't hear or maybe the phone is in a different room.
    He heard it but was prevented from reacting by other circumstances.
    If you are away from your phone, there are visual cues when you get back to it that a message has come in. If you are walking down a busy street with your phone in your pocket, there is also in the vast majority of phones a vibrate option to give an alternative kind of notification. If you are driving a car responsibly on a journey of some length, it would becoming annoying after a while if your phone was beeping in your briefcase in the back of the car, or if you leave your phone on your desk at the office whilst you are elsewhere, the repeated beeping could be just as annoying to other people.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • SFTP adapter error : Catching exception calling messaging system

    Error: com.aedaptive.sftp.adapter.SFTPException : Not all messages were delivered succesfully
      Could not deliver message to XI: com.sap.aii.af.lib.mp.module.ModuleException: senderChannel 'ca09269447583427adc545f8c23d244b': Catching exception calling messaging system
    This is error message which i get in sender communication channel while working  with SFTP adapter.

    Hi Pooja,
    I think it would be better to add getcause() to get the cause of the issue.
    Ref: http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/aii/af/lib/mp/module/ModuleException.html
    Thanks,

  • How to determine number from Restricted call message

    Is there a way I can find out who keeps calling me from a restricted number?
    >Thread branched. Post and Subject edited to remove question concerning the thread this post came from<
    Message was edited by: Verizon Moderator><

        Hi there MirankaVanHintum,
    Let's put a stop to those pesky restricted calls! We have a great option to prevent this from happening.  We have a service called Family Base!
    Check it out here
    Thanks, BobbyS_VZW
    Follow us on Twitter @VZWSupport

  • Reverse call log issue

    i keep getting an error when i try to do a reverse call lookup. it says try setting phone list view to "call log" but i don't have that option. It says if this option is unavailable this is a known but and we are working with RIM to correct the issue. If you require assitance accessing the phone list view settings or would like to be notified when a fix is available please use the Send Us Feedback option and indicate Reverse Call Log issue in message. But where is this send us feedback? I'm so confused. Anyone have this problem or know where I can get some help for it? Thanks again

    How did you reload the firmware? Did you backup the data and perform a reset using *#7370# before reloading? Try and reply.
    Nokia C7

  • My iTunes in MacBook is not working i do received error You can not post a blank message. Please type your message and try again. saying I don't  have  permission to media folder could help me

    You can not post a blank message. Please type your message and try again.

    some additional info about the clean install, I did not Migrate any data over from a Time Machine, I started fresh. Perhaps this could be my issue. Do I need to Migrate over the User account in order to have access to my old data?

  • Stumped on BDC Call Transaction issue

    Hi,
    When I do a:
                call transaction 'VGM2' using bdcdata
                   messages into itab.
    It doesn't work.
    If I debug the transaction, there is is a row of data in itab.
    I would like to use this data to figure out what's going wrong, but I can't find any documentation on what the fields in the table refer to.
    Does anyone know where BDCMSGCOLL is documented along with the error numbers that get returned?
    Thx.
    Andy Jacobs

    Hi Andy,
    help.sap.com gives very good documentation.  Just plug in
    BDCMSGCOLL and look at the segment on Call Transaction Using.
    For example:The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
    Meaning of the fields:
    System fields:
    SY-MSGID Message-ID
    SY-MSGTY Message type (E,I,W,S,A,X)
    SY-MSGNO Message number
    SY-MSGV1 Message variable 1
    SY-MSGV2 Message variable 2
    SY-MSGV3 Message variable 3
    SY-MSGV4 Message variable 4
    These messages are in message classes.
    For your transaction VGM2 the message class is VL.
    You can see this by doing a System->Status on the screen and looking at the message-id of the report line.
    Each of the messages are self-documented in the message class.  Go to transaction SE91 and view the messages of VL.
    You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
    write out or save the message table
    use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.
    regards,
    Marilyn Pratt

  • Load More Messages issues

    I saw some posts about load more messages issues, but nothing seems to be the same as my problem. I'm new to iPhone, so I must be missing something obvious.
    I was looking at my emails this morning and deleted all but 5. I responded to an email, but didn’t send because I forget change the server port for outgoing mail that our server requires. So I went into settings and changed the port. I went back to my inbox but can no longer see the messages I saved, instead there's an option that says “Load More Messages” with a note below it stating “5 messages total, 0 unread”. I have no other emails in my inbox. When I click Load More Messages, nothing happens. I can’t figure out how to get to those emails. I tried cycling the power on the iphone, that didn’t help.
    I'm getting new messages normally. My mail is set to show 25 recent messages. Even if I change this, it still displays the "Load More Messages". As an extreme test, I set it to show 200 recent messages, went back to my inbox, hit the "Load More Messages" option, but that didn't help. What's more, I have a full signal and I'm running 3G.

    Hey man, your problem sounds similar to the one I'm having. I can't load more messages on both of my email accounts. But I think I might have figured out the problem. I recently re-installed my hotmail account and when I was looking through my,"Unread" inbox the, "Load more messages" command was working just fine. So I was continuing to go through my messages to make them read (because if your like me, I don't like to have any messages, "Unread." So when all my messages were read there was about 80 in total, and my setting was set to show the 25 most recent. So I backed out of the mail app, did a few more things and came back hoping that there would only be 25 showing with 0 unread and the ability to load more if i wished. Well, there was 25 showing but the box with the load more messages command was gone and no matter how many times I tried to refresh it would not come back.
    So my theory is this; there always has to be an unread message in your inbox for the load more messages to work. Sorry about the long post. I'm going to test this theory out, knowing my luck, it won't work at all. Good luck bro!
    Peace.

  • Iphone 6 call quality issue....

    Hi, yesterday i saw software update in my iphone 6 and i thought it will solve the call quality issue , but unfortunately it was not for that.
    Dear iphone support , the call quality in iphone 6 is really bad, I was using iphone 4S and that had great voice quality. iphone 6 voice during call is not clear , it has noise .
    When I told my friends about the problem , they told me that I might have bought the refurbish phone. But I bought it from Dubai in 750 USD and I do not think it would be the case.

    Since my iPhone 6 has great Call Quality,
    My tip would be to take it to an Apple shop. All apple Products have world wide warranty.
    If it is really they should be able to fix it.
    Hope this helps,

  • Calls, Messages, Facetime going to wrong Iphone?

    Me and my mum both have an Iphone 4. Recently she has been recieving my calls, messages and facetimes? Any Ideas?
    I have recently just downloaded IOS 7 but it seems to be working fine.

    Settings>iMessage>uncheck your phoen number and email from her iphone

  • Enter a name and city for one-time account posting is the message i get

    Enter a name and city for one-time account posting is the message i get ,when i am trying to post a onetime vendor .I have entered name ,country and language when the pop comes.But still throws me this message ,pls help.

    Hi,
    I didnt understand what u mean by "when i am trying to post a onetime vendor".
    Pl. specify whether you are:
    -Creating a OTV
    -Creating a PO for a OTV
    or
    doing any other transaction
    Regards,
    Prithviraj

  • HU items' material posting is inconsistent (Message no. HUGENERAL327)

    Hi,
    I am trying to pack a material in an Outbound Delivery (OBDLV),  into a container (Packing Material) and while trying to Post GI (PGI), system is throwing the error message:
    HU items' material posting is inconsistent (Message no. HUGENERAL327).
    In Details of the message it is as below:
    Diagnosis
    Handling unit 2001422 contains more than one item. The goods movement posts the items to storage locations with different HU-management strategies. The stock contained in one handling unit can be located either only in HU-managed storage locations or only in non-HU storage locations.
    Procedure
    You have the following options:
    Post all items to an HU-managed storage location
    Post all items to a non-HU storage location
    Repack the items in different handling units so that items that are to be posted to the same type of storage location are packed together.
    I am not sure what in configuration is missing opr what master data is not set up correctly.
    Please help.
    Regards,
    Kalyan

    Hi,
    different cases can cause the error message hugeneral327. In most cases this error message is shown  when stock determination is used together with handling unit management. This is not supported in standard.                                                                               
    Please check the attached notes 550289, 605629 and 952440, where it is described, that handling unit management and stock determination does not work together.          
    Regards,
    Ely

Maybe you are looking for