Post capitalization - posts to sub ledger?

Dear Experts,
Does post capitalization transaction ABNAN posts to subledger?
When i made the posting, i have some difference between sub ledger and main ledger.
Regards,
Smile

Hi Smile,
Yes it sure does because you need to provide the asset number during ABNAN. Check your aw01n for that asset and see the value of your difference between your sub & General ledgers if you find something significant there or most likely, equal to the planned values. Because, I'd rather see your problem arising on the asset value date which you have identified during ABNAN and that you need to run depreciation for that particular asset that you have capitalized. Hope this helps.
rgds,
jay

Similar Messages

  • Current Day Bank Statement post to GL and Sub-Ledger

    Hello SAP Friends,
    I need help on Current Day Bank Statement. Appreciate your input/help/opinion.
    My client wants to update Current day bank statement to G/L and Sub-Ledger so that any electronic payment received from customer updated in real-time. As the sale cycle is very short about a week, they do not want to wait to update book with prior day bank statement.
    SAP standard functionality allows creating memo record from current day bank statement to reflect Correct Cash Position.
    Can someone share there experience for Current day bank statement posting and how process has been managed technically?
    Thanks for all help.
    Suresh

    Hi,
    When Manual bank statement is run, a JV gets posted knocking of subledger with debit or credit (Payment/Deposit) and one line item will be posted in the main bank account.
    In you scenario, take the document available in the main bank account and reverse it in transaction code FBRA. This will knock off all the balances and the ledger will be zero.

  • Error in posting to a ledger using sapfgubt

    Hi experts,
    May I ask your help regarding the dump error I get when posting to a ledger using the sap standard program sapfgubt. Below is my code.
    loop at itab.
    move correspoding fields of itab to sidata.
    perform e10_ext_table(sapfgubt) using ' ' ' ' 'X' sidata.
    endloop.
    perform f80_set_end_docnr(sapfgubt).
    perform f40_update(sapfgubt) using 'X' ' '.
    commit work.
    The error happens inside the "commit work" statement. It calls another sap standard program SAPLGLIU. The error specifically happens under the include program "LGLIUF11" when it inserts the entries into the ledger.
    The error says runtime errors: "SAPSQL_ARRAY_INSERT_DUPREC" and Except.: "CX_SY_OPEN_SQL_DB".
    It is saying that the record already exists with the same key even if it doesn't exist in the ledger yet.
    I was able to find a partial solution by adding a number per document line. Now it posts to the ledger successfully but there are times also that it fails to post and the program still dumps.
    Is there an OSS for this? do I need to add something.
    Any suggestion would be much appreciated.
    Thanks a lot!
    Edited by: bgmis pma on Dec 9, 2008 6:57 AM

    check
    V_T52EL
    V_T52EK
    t code OBYE  OBYG  once
    check especially for The TDS  wage type
    if possible send me the screen shot of pay roll accounting simulation
    check my bcard for my info
    Edited by: Sikindar on Oct 16, 2008 3:59 PM

  • Posted One-Time Ledger Re-appear in Plan Item

    Hi Expert,
    I have a contact with Actual Rental and One-Time Ledger Rental (dated 15.05.2007 with RM6000). The cash flow appear correctly (just appear actual rental) before i enter a new one time ledger rental.
    When i insert a new One-Time Ledger Rental dated 01.05.2009 (RM500), why the old posted One Time Ledger Rental (15.05.2007, RM6000) row appear also in cash flow in Display Plan Item view ? If i save new one time retnal and execute Periodic Posting (RERAPP), the old one time ledger also incuded.
    I tried for other contract is ok, this only happen to one of the contract. Can anyone help me why before insert one-time rental it display fine but after insert new one time rental, the old row also appear as plan item ?
    Thanks in advance
    Regards,
    Oscar

    -

  • Double Posting in Parallel Ledger

    Hello Gurus
    We have Non-US company codes and have various depreciation areas assigned to it. Area 01 is main assigned to leading ledger 0L and area 30 is USGAAP assigned to L1 ( parallel Ledger). Area 01 Post real time and Area 30 is "Area post APC Directly and Depreciation.
    Everything was working fine. Area 01 and L1 were getting correct postings. Recently due to client requirement for treatment of their Composite assets, we make certain adjustments in area 30 and area 01 differently. Like area 01 does not get any posting and area 30 get some adjustment posting and we do through Z transaction types. To achieve this we had to run periodic posting and thus assigned ZA document type to company codes of Mexico.
    With this what is now happening is
    When we post 10000 MXN to asset, Area 01 gets 10000 but area 30 which is L1 gets 20000.
    To resolve this issue we tried various options like, If we
    Assign Area post depreciation only to area 30 then it works fine but then our treatment of composite does not work
    If we assign area post APC and depreciation on periodic basis, then it again doubles but doubles when we run ASKBN.
    Please advise. It is real serious issue here.
    Thanks

    Hi Jean,
    now I am astonished. Ok, I do not know your Support tickets, and I don´t know which bad OSS notes you mean. But your statement that you always get double postings is not correct if you follow the guideline how to set up your scenario with 2 different ledger (groups).
    The documentation can be found in the SAP Help Portal here: Parallel Accounting in Asset Accounting  .
    There you find the link to the chapter "Parallel Ledgers in Asset Accounting", which contains detailed information and configuration steps to fulfill this requirement.
    If you want to post 2 areas to G/L to different ledger groups, then the official SAP proposal is to use the so called "Ledger Scenario". In that scenario your alternative valuation does only post depreciation to G/L, so that you do not get double postings. If you have valuation differences, which appear automatically through different APC amounts or different value adjustments at retirement, then a derived depreciation area will post these differences ledger specific to your alternative valuation.
    I admit that this scenario is not the most convenient, but it will provide the full functionality of parallel valuation at ledger (group) level.
    The only real big limitation existing is that you can not really use different fiscal year variants within the valuation areas. But the basic requirement under which this thread was opened should work without problems.
    Regards,
    Markus

  • F.05 Posting for general ledger account .......[Error]

    Hi expert,
    I am running a transaction in F.05 and encounter several error messages such as:
    1 Incorrect account determination: ABC 11111 >> No performance Assistant message
    2 Enter account number with a maximum of 10 characters  No performance Assistant message
    3 Posting for general ledger account 11111 amount >> 
    Performance Assistant message prompt:
    Posting for general ledger account 11111 amount 199,999.00 set in batch input
    Message no. FR008
    Diagnosis
    In an evaluation that affects the financial statements, the posting for company code ABC and G/L amount 199,999.00 SGD, could not be carried out.
    System Response
    The posting is entered in a batch input session.
    Procedure
    Correct the error, for example, missing account determination, and run the batch input session. This ensures that the posting and the evaluation difference noted in the documents agree again.
    Please advise.
    Thank you!

    1.  Financial Accounting (New) > General Ledger Accounting (New) > Periodic Processing > Valuate > Foreign Currency Valuation.
    Check your settings
    2. Check if how you have defined you account groups in OBD4. Most probabaly you have defined 10 digit account length.
    3. Check if the document type is relevent only for batch input.
    Rgds
    Harmees

  • No accounting rule despite posting to general ledger ERP

    Hi expert,
    I create a securities transaction and faced this message in TBB1.
    No accounting rule despite posting to general ledger ERP
    Message no. TPM_TRAC1509
    Am I miss somethings in configuration? Thanks for any support!

    Hi tap nguyen,
    You have to maintain accounting principle in SPRO - Corporate Finance Management - Transaction Manager - General Settings- Accounting - Organization - Assign Accounting Codes and Valuation Areas.
    Regards
    Gouse

  • Please help how to undo the post in general ledger?

    dear all,,
    please help me ?
    we have R12 Orcale.
    I made a post in general ledger for closing purpose ??
    now I want to undo post whatever I posted should return back as it is ??
    how I can do it ??
    for more clarification
    for closing the account period we went to the general ledger than post journal after that we select the period name than we select find ?
    after find I made tick to all the transactions there than I posted ?
    my question How I can cancel the post or undo and keep it as it is ??
    please help

    A posted journal batch can not be deleted, You can reverse it to nullify the accounting effects of the posted journal batch.
    refer MOS note:
    Can a Posted General Ledger Journal Entry be Deleted? [ID 135532.1]
    regards,

  • Unable to clear sub-ledger items on uploading electronic bank statement

    Hi All,
    The client is in Belgium & uses format BE for bank statements. in postprocessing of EBS (FEBA), there are a few items with a posting rule 0002 (for Eg) that need to be posted manually. The posting rule is as below:
    0002   1  40   BE INTERIM                 50  BE BANK      ZR   1
    0002   2         BE OUTGOING BE      50  BE INTERIM   ZV   4
    As you can see the posting type is 1 & 4. The user's contention is that this should knock off items in sub-ledger i.e., vendor & customer open items but the system is posting to the GL accounts that are assigned to the account symbols shown above.
    My question is... Is it possible with such a posting rule to clear items in sub-ledger? If yes, is there any setting that needs to done to ensire that in FEBA, on manually trying to post the system should direct to the screen where you can enter the customer or vendor number & select open item?
    Thanks,
    Lakshmi

    I found the answer in Customizing new G/L. thanks anyway.
    Heiidi

  • FI GL and FI AA sub-ledger recon balance  mismatch

    Hi,
    FI GL and FI AA sub-ledger recon balance mismatch
    Year 2010 .and period 12 .. no mismatch
    Year 2011 and period  01 .. there is mismatch
    so I thing there was issue in year end closing. And now we are in Nov ( 11 period ) . so our special posting period is also  not open to reprocess year end activity.
    How  should i approach to this issue.
    Please guide with step by step process.
    Thanks
    P B

    Thank you for reply,
    2010 Closing and 2011 Opening balance is same.
    and we are using SAP R/3 4.7  so we dont have that t code FAGLGVTR.
    in ABST2 there is the difference in Balance.
    2010 period 12  
    In GL                                                                         
    Begging Balance(100)        
    ending balance (100)
    In Subledger
    Begging Balance (100)
    ending balance    (100)
    difference between both ledgers ( 0)
    But in 
    2011 period 1
    In GL                                                                         In Subledger
    Begging Balance   (100)
    ending balance      (100)
    In Subledger
    Begging Balance ( -400)
    ending balance    (-400)
    difference between both ledgers ( 500)
    Now i checked this
    1. FS10N - GL Balance is same in 2010 period 12 and 2011 period 1
    2. AR01  - Subledger Balance is same in 2010 period 12 and 2011 period 1
    Q : where this -400 balance is coming from . ( where can i see or how can i identify ?)
    Note :
    ( Program is pulling this value from Table : GLPCT )
    Thanks
    P B
    Edited by: pbpatel on Nov 9, 2011 1:38 AM

  • Intial Bank Balanace in Sub-Ledger Bank Accounting

    Hi,
    I am going to upload the first ELECTRONIC bank statement into the system. I am using FF.5 to post the initial bank statement and the program is RFEBGB00. However, when I post the initial bank statement in the bank sub-ledger, the initial bank statement is showing as balance "0", which is deviating with the entries that I posted into F-02. In other words, the balances in General ledger bank account and sub-ledger would be deviating to the extent of the balance as on first bank statement.
    In GL Accounting we have already loaded the balance of the bank main account using F-02.
    Any conceptual clarity would be highly appreciated.
    Regards,
    Edited by: John Garner on Dec 8, 2008 3:27 PM

    Hi Alexis,
    Posting area 2 (Subledger Posting) is already configured for posting rule in OT83 for your system, thats the reason system is posting to customer and vendor accounts once it is finding subledger account details in the file.
    If your client doesn't want to post to subledger accounts then delete posting area 2 from posting rule in OT83.
    Regards,
    Mohammed Kalim

  • Report to tie sub-ledger to the G/L

    The client needs a balances report that shows detailed balances that would tie to the trial balance in fs10n. The asset balances report cant be used because the "report date" appears to use the value date of the asset and not the posting date. Say if an asset was posted today with a value date in february, the cost appears when you run the report as of 2/28, but this cost wasnt in the G/L on 2/28. Hence fs10n and the balance report dont tie. Where can we get a report to pull the asset balances by the POSTING DATE?
    Note: ABST2 wouldnt fulfill the requirement as it only shows recon analysis and has no details.

    Hi,
    The current book value only works for this period not historicals. I would like to get historicals based on the posting date. The report date is not really the posting date. For example, if you post a retirement now with a value date of 3/31 and posting date 8/20 and run the balances report for 4/30, 5/31 etc you would see that the asset wouldnt be on the report but it would show up on retirements. Same with transfers. Here we do a lot of transfers/retirements and acquisitions with old value dates, that way we can have the asset on the subledger and account for the depreciation from that date. However, as a rule the asset is posted in the current period (since the old periods are obviously closed). Now the internal audit requirement is that they need a balances report to tie the G/L to the sub-ledger as of any posting date (including historicals). As far as I have seen, no standard report is able to accomplish this for us. If its going to be a custom report, then please let me know which tables I can find this data. The issue I have is that the legacy assets which are not posted to but have balances dont exist in ANEK. So, ANEK info doesnt let me tie to the G/L. I need balances + ANEK info upto a certain posting date.

  • Sub ledger Postings - EBS

    Hi All,
    I wanted to confirm whether sub ledger posting through Bank Statement upload works only in case of customers and not in case of vendors. I m trying the carry out sub ledger posting for vendors. however SAP is determining account type D only for sub ledger posting.
    Thanks in advance for your valuable inputs.
    Regards,
    Aman Goel

    Hi,
    Please refer this link:
    http://www.sapfans.com/forums/viewtopic.php?f=10&t=336113
    Regards,
    Pramitha.

  • Advance sub ledger and create Artist statement

    hi all,
    i am getting error in one report program name ( *ZFI_ARTIST_STATEMENT* ) Tcode (ZFI_ARTIST_STATEMENT) Clear advance sub ledger and create Artist statement .
    this is running good in FCI environment but not in FCP environment. so please can you suggest me that what could be the isssue.
    there is no change in program . that i have already seen.

    I feel you have posted the question in wrong forum as it seems from your explanation that the issue is not related to SD.  What for that zee report has been developed ??
    thanks
    G. Lakshmipathi

  • General ledger / sub ledger reconciliation, without new GL:

    Hi experts, hope you can help me with this quick question:
    My client is currently reconciling SAP General Ledger  and Subledger balances in excel spreadsheets, for Customer and Vendors.
    The reconciliation is as follows, when the postings are done on general ledger on a reconciliation account and on the correspondent sub ledger, the line items have to be checked on both to be sure that transfer has been done correctly. Currently this process if done by a Vlookup in Excel, using the reference number as join between the data extracted.
    We are running ECC6.0, without the new GL, do you know if there is a standard program to make this reconciliation, I will appreciate any documentation about this topic.
    Thanks in advance.

    Firstly, why would there be any difference between the total of customer/vendor sub-ledger balances and the balance on the reconciliation account(s)?  The posting to the reconciliation account is happening automatically right, when you are posting to a customer/vendor (basing on the reconciliation account assigned in the customer/vendor master)?  And system would not allow direct postings to reconciliation accounts, which eliminates the threat of reconciliation GL account going out of balance as compared to the sub-ledger accounts.
    However, you can run FBL3N or FS10N for the reconciliation account(s) and match it with the total balance on all customers/vendors using transaction FBL5N/FBL1N.

Maybe you are looking for

  • How do I get my Bookmarks to appear with icons instead of text?

    I do not want my bookmarked websites that are in my toolbar to appear as text only. i want them to show with the icon as well.

  • Captioned Videos Saved as .swf not uploading

    Is there any way to upload a captioned video, saved as .swf, to the content library? I thought Adobe Connect Presenter was Section 508 compliant. This seems ridiculous if it can't be done. I work for the Govt and we have to abide by all Section 508 g

  • How do I modify the test of an enumeration programmatically?

    Hi everyone, I have an application with 8 scopes on it and the data displayed on the scope is selected by a drop down menu which is an enum control that is a typedef.  Since this application interfaces with different hardware, I need to be able to ch

  • Browse option --

    Hi, Is there any way to change the look of browse option window?[am using WEBUTIL_FILE.FILE_SAVE_DIALOG method] Regards Priya

  • Migration assistant locked up at 5-8 minutes

    Im trying to run migration assistant, and it went for three hours then got stuck at the applications folder. it has said between 8 and 5 minutes for over an hour. is there a safe way to shut it down?