Post goods issue for outbound delivery in previous month

Hi experts,
Pls help. Many thx.
Due to roll out, some stock need to be issued in previous month. It works fine except some deliveries. Those deliveries have been cancelled goods issue due to wrong posting date.
For e.g. the posting date in delivery should be April 1. Due to oversight, the date is entered as May 27. In VL09, the reverse date should be in May. Otherwise, the system disallows further.
Now, the problem comes up. When doing those deliveries again (even create new deliveries), the error message pops up "Deficit of SL Unrestr. prev. 350 KG : XX material XX plant XX storage location
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 350 KG.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing."

Hi Lakshmipathy,
I tried the same as you said but its throwing the error below:
GI for delivery 80014996 cannot be canceled for the following reasons:
Cancellation date 30.04.2009 is before the goods issue date 28.05.2009.
I don't have the any issues but i tried whether its working or not.
Kindly suggest...
Regards,
SK

Similar Messages

  • Post Goods Issue for Outbound delivery return

    Hi, I'm trying to Post a Goods Issue for a returned outbound delivery but  I cannot find a function module to do this, I tried using SD_DELIVERY_UPDATE_PICKING but its creating the material against the outbound delivery with status archived, which means it wasn't created.
    I also tried using the MB_CREATE_GOODS_MOVEMENT, but this one is creating the material document but not updating the status and the document flow of the delivery.
    Thanks,
    Pablo

    Hi Lopez,
    Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
    Regards,
    Sravanthi

  • Automatic goods issue for outbound delivery, during the transfer order confirmation

    Hello,
    Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
    Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
    Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
    Thanks in advance.

    Hi Iiya
    Check the below setting, might be helpful

  • Goods issue for outbound delivery

    Any example on how to simulate vl06g (goods issue for otubound delivery)?
    I'm trying it with BAPI_GOODSMVT_CREATE...
    Thnks.

    Hi Lopez,
    Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
    Regards,
    Sravanthi

  • Automatic goods issue for outbound delivery without picking/packing

    Hi,
    I have the following flow: sales order -> outbound delivery -> goods issue.
    I would like to to be able to post an automatic goods issue on my delivery.
    Could someone please let me me know how to perform the customizing for this or give me the reference of the appropriate post which answers this.
    Thanks,

    Hi,
    Use t-code VL23
    select  varient SAP & STANDARD >>> Click on START IMMEDIATELY
    or else
    click on schedule >>> click on schedule periodically >>> select your option as Minute and maintain value 1 or ( 1 to 60 )
    it means sytem will run this program after every one minute
    Also You can able to create your own varients and speciefy criteris like form which sales orz, which delivery types etc.
    Kapil

  • SD: Need to cancel Goods Issue for Outbound delivery cancellation via VL09

    Hello.
    User have have canceled the GI for OBD via VL09. But the date of cancelation is 09.11.2010 though it should be 29.10.2010 (as it was in the initial document).
    Is there any possibility to cancel this cancellation?
    Best regards.

    hi
    once PGR happend basing on the document date we cannot reverse on the same.  functionally it is not possible because the entry has been registered/credited wirh COGS.
    hope this helps
    regards
    balajia
    Edited by: balaji timmampalli achari on Nov 14, 2010 2:43 AM

  • Different movement types for goods issue via outbound delivery

    Hi gurus,
    How can I use different movement types for goods issue via outbound delivery?
    Thanks&Best Regards,
    Burcu

    To use different schedule lines, we need different item types and different document types. Is that right?
    Is there a user exit in outbound delivery to post goods issue?
    Thanks...

  • Automatic Goods Issue after Outbound delivery and shipment.

    Hi,
    I am working on LES part.
    Could you please explain me how to do Automatic post goods issue for shipments.
    (in our scenario where after outbound delivery, picking, packing shipment takes place.)
    Can we use VL23 for automatic goods issue for shipments? (or igoods issue is only for outbound deliveries?)
    If so what is the selection criteria for background scheduling-Variants?
    Please explain me in detail
    Thanks a lot.

    Anil,
    Not sure if I understand your question, Goods Issue is posted for the delivery and not the shipment.  In a shipment you can update the actual values for Planned, Check-In, Load Start, Load End etc values.  A shipment can have single/multiple deliveries, you can use VL23 for scheduling a background job to do the PGI automatically, use either the standard variants or define your own variant and use that variant to schedule the job.
    hith
    Sunil Achyut

  • Goods Issue against outbound delivery from blocked stock

    Dear All
    I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
    Please let me know any solution for this.
    Thanks and Regards
    Satish Kumar

    Hi
    Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
    http://scn.sap.com/thread/1541911
    Thank$

  • Post Goods Issue for movement type 351

    Hi experts,
    I need to perform a post goods issue for the movement type 351.
    which bapi we need to use? is it going to be "BAPI_GOODSMVT_CREATE" or something else.
    What are the information that we require other than movement type for performing post goods isue?
    Any pointers on this will be highly appreciated.
    Regards,
    Sajith

    Hi ,
    Thanks man.. Then where should I do that.
    Idoc is PORDCR102. Message type is PORDCR1.
    My requirement is to create a STO first in the user exit EXIT_SAPL2012_001 and then to perform a Post goods issue in the user exit EXIT_SAPL2012_003.
    Can u please explain it.
    Regards,
    Sajith

  • I can't  post goods issue for the outbound delivery

    I select the indicator of GI via delivery in transport block via TCODE OPKP and assign the production profile to the work schedule view of the material master.then I create a production order for the material and release it.I do the wm material staging for the producion order via TCODE LP10,An outbound delivery was created automatically and the movement type is 261.then I pick for the delivery and confirm the transfer order.When I do the post goods issue there is a error message .
    E M7 226
    Update control of movement type incorrect (entry 261 X X _ _ _ V )
    then I see the onlinehelp,I find the configurations are ok.
    the content is following in table t345.
    werks  supply area  material staging indicaor  
    1000   PVB 1310WM     1                         1   wmpp   10000

    Please kindly refer to the attached notes below :
    523509     FAQ: Control tables (no Customizing)
    161729     M7226 with KZVBR=V
    Hope this helps.

  • Posting of Goods Issue for a Delivery (Different movement types)

    Hello SD Experts,
    We have this process wherein we use Deliveries w/o reference. There's a customization in place for this process, the movement type is determined through the item category of the material.
    Given this scenario, my question is if it is possible to process the goods issue of a delivery with multiple item which require different movement types (diffrent items and item categories thus it have different movement types)?
    Thank you for your kind consideration.

    Hello,
    Yes, you can.
    As you know LO is std delv doc for delv w/o reference.
    And I cat determination for that LO delv doc are
    Delv Type  __ I Cat Group  __  Usage __ High I Cat  __  Def I Cat  __ Man I Cat __ Man I Cat
    LO _____________________TEXT ______________ DLTX          
    LO ________DIEN____________________________ DLX _______DLX     
    LO ________LEER___________________________ DLN          
    LO ________LEER________________DLNG_______DLNZ          
    LO ________LEIS_____________________________DLX_______DLX     
    LO________ NLAG____________________________ DLX          
    LO________NORM____________________________DLN          
    LO________NORM________CHSP_______________DLN          
    LO________NORM________CHSP____KLN________KLN          
    LO________NORM________CHSP____TANN______TANN          
    LO________NORM________PACK_______________DLN________DLX________DLP
    LO________VERP____________________________DLN          
    LO________VERP_________PACK_______________HUPM______DLN     
    LO ________VOLL____________________________ DLNG          
    LO ________ WERT____________________________ DLW          
    Corresponding maintain movement type in Schedule line cat (Tcode VOV6) & determination that in TCode VOV5.
    If you want diff movement type then create your own 'Z' Sch line cat with you desired Movement type (Tcode VOV6) and determine the Sch line Cat accordingly in TCoDe VOV5.
    Thanks & Regards
    JP

  • Goods Receive for Outbound Delivery Without Reference using MIGO

    Dear Colleague ...
    We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
    (1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
    (2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
    (3) The first 2 (two) cases work just find with MIGO.  We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
    (4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5".  We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
    (5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
    Appreciate for any thoughts or input on the above.  Many thanks,
    Alvon Sibarani

    use transaction mb0a it will work for the scenario.

  • Post Goods Receipt for Inbound Delivery using WHSCON IDoc

    Dear All
    Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
    We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
    I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
    We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
    We create a delivery (type NL = replenishment delivery) for this POs
    As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
    At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
    Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
    We dispatched 50 units of a product => QTY:50:12
    The partner received indeed 50 units => QVR:50:66
    Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
    When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
    the goods receipts for the products in the original stock transport order and
    upate the message flow in the delivery
    My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
    In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
    I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
    To make a long story short here are my questions:
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    Does anybody have an example on how to fill the WHSCON IDoc?
    Or is my approach a cul-de-sac ?
    Kind Regards
       Uwe
    PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Automatic Goods Issue in Outbound delivery scenario with resp to Shipment

    Hi,
    Could you please explain me, how  Automatic Goods Issue happens in Outbound delivery scenario process and in shipment process.
    Is there any transaction for this?
    Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
    How  we schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
    Could you please explain me in detail?
    Thanks A lot.

    Hi Anil,
    VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
    Thanks,
    Sree.Manam

Maybe you are looking for

  • Missing tools Adobe Muse

    if they created a new web program, taking away support adobe firework, there are tools that are necessary for the web: Create a rectangular slice based on a selected object Add Filters button in the Properties panel. Photoshop Live Effects Tools and

  • Bank Data automatic transfer for Portugal

    Hi, I would like to know if there is an automatic way of transfering bank data from a file for Portugal. For Spain for example I know we can do it using transaction BAUP, but we do not know how to it for Portugal. Can anyone help me? Thank you very m

  • AirPlay works for everything except Stan.

    airplay works for everything from the iPad, youtube, iTunes etc. no drop outs, clear as day. When using Stan it connects and streams for about a minute, then the air play connection drops out. Re connects but at best plays for a minute. Router in nex

  • Is there one simple button or option called "delete or remove duplicates" ??

    is there one simple button or option called "delete or remove duplicates" ??

  • Can't preview webpage in firefox

    Hello, i've been using firefox to preview my webpages in dreamweaver for some time now and for some reason it won't open the page in firefox. If i use explorer or safari it works fine. Any suggestions as to why it might not be loading? thanks