Post install failing with Java Exception creating the Oracle Context

I have not been able to complete the post-install portion of the OID which is run by the Oracle 9iAS Infrastructure installer.
Is there a way to create the Oracle Context and whatever else is part of the /ldap/postcfg/postcfg script without the use of the Java assistants? I am getting a Java exception when creating the Oracle Context.
Thanks,
e.

are you trying to install ias on Linux or windows??

Similar Messages

  • Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

    Hello,
    Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
    Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana.  zip folder: "sap_hana_win32_studio_rev80"
    Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
    Actions taken:
    Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
    Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
    Checked OSS (ie Note 1859686 - HANA Studio does not start)
    Description of installation error:
    Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine".  I've verified that there is nearly 3G of memory free.  What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini".  I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
    Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
    If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution.  Thanks very much.
    FYI: the HANA Client installed with no issues.
    Jim Cleek
    FYI: the images below reflect the sequence of images produced during the installation.
    after clicking OK above, the screen below gets updated (see the "is not empty" msg).
    Below is the eclipse.ini file located in the deployed/target folder:
    Message was edited by: Jim Cleek
    FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder.  The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

    Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario.  They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package.  One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
    Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory.  The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
    FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
    SAPCAR 7.20 -> Windows on x64 64bit:  SAPCAR_315-20010453.EXE
    IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
    Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
    IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
    Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
    jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
    Jim Cleek
    HP Enterprise Services

  • Db 11.2.0.3 install fails with this exception

    Hello All,
    To give a background :
    have Virtual box on windows 7.. Virtual box have the oracle linux 6. Completed installed for clusterware.
    I have successfully installed clusterware, while attempting to install database i get a alert at the step 2 of the db install.
    this is my second attempt to install the db software , at the first time I had the bad checksum of the db installation software .. I cleaned up the Oracle home and made the second attempt to get the below warning and fails:
    more oraInstall2013-04-11_06-50-25PM.err
    ---# Begin Stacktrace #---------------------------
    ID: oracle.install.ivw.common.validator.SupportedOSValidator:363
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not a
    vailable for verifying prerequisites on this operating system distribution
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTa
    skFactory.java:301)
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTa
    skFactory.java:159)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSuppo
    rted(VerificationUtil.java:7441)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSuppo
    rted(VerificationUtil.java:7390)
         at oracle.cluster.verification.ClusterVerification.isPreReqSupported(Clu
    sterVerification.java:6598)
         at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnviro
    nment(SupportedOSValidator.java:68)
         at oracle.install.ivw.common.validator.SupportedOSValidator.validate(Sup
    portedOSValidator.java:96)
         at oracle.install.commons.flow.validation.ValidationHelper.validateState
    (ValidationHelper.java:185)
         at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlo
    wExecutor.java:415)
         at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(Abstract
    FlowExecutor.java:639)
         at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:331)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:271)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:230)
         at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
         at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:125)
         at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:101)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:417)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
         at java.util.concurrent.FutureTask.run(FutureTask.java:123)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:651)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:676)
         at java.lang.Thread.run(Thread.java:637)
    ---# End Stacktrace #-----------------------------
    ---# Begin Stacktrace #---------------------------
    ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:366
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:301)
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:159)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:7441)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:7390)
         at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6598)
         at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnvironment(SupportedOSValidator.java:68)
         at oracle.install.ivw.common.validator.SupportedOSValidator.validate(SupportedOSValidator.java:96)
         at oracle.install.commons.flow.validation.ValidationHelper.validateState(ValidationHelper.java:185)
         at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlowExecutor.java:415)
         at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(AbstractFlowExecutor.java:639)
         at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:331)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:271)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:230)
         at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
         at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:125)
         at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:101)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:417)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
         at java.util.concurrent.FutureTask.run(FutureTask.java:123)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:651)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:676)
         at java.lang.Thread.run(Thread.java:637)
    ---# End Stacktrace #-----------------------------
    I tried to deinstall the failed installation through deinstall but get an error with that as well with a perl error. Currently I do not have any files under my oracle home.
    Any suggestions on how to proceed at this point would be really helpful.

    Hi Friend,
    Please check Pre-Requisites for Oracle 11g R2 database for Virtual Box. May be below link will give you some sort of idea.
    http://eudba.wordpress.com/2012/08/10/installing-oracle-11g-on-oracle-linux-6-with-asm-eng/
    Thanks
    LaserSoft

  • BB Link Install fails with message "Some of the installati​on files from the previous versions of the software could not be removed. Make sure that no other applicatio​n is using these files."

    Has anyone seen a solution to BB Link failure with this mode?

    Yes - there was an interval of days between the unsinstallation of the original BBL, when I was not using the Z10. I had resorted to using my 9810 and had re-established my BIS Account. Originally I was not aware that the Z10 caused my BIS Account to go away, so I returned to using the 9810,
    Recently, I went back to reinstall the BBL and considered activating the Z10 again, however now I am unable to install BBL.
    Do you know where I can find the Launch version of BBL? Perhaps reinstalling that will work?
    Incidentally, I had unistalled BB Desktop 7 one time including all recommendations for a clean uninstall and did perform a system scan.
    It may help to mention that I am running VISTA32 business in case that is germain.

  • XML Publisher report failing with java.lang.outofmemoryerror.

    Hi,
    We have developed a custom Oracle report that produces an XML output file that is about 13M in size (about 18K rows from the database). When running report as concurrent request, post processing fails with java.lang.outofmemoryerror. The failure occurs when specifying output format as Excel, RTF or HTML. However, the process completes successfully when specifying output format as PDF. We have also noticed that Excel, RTF and HTML will complete successfully if the XML data file is smaller (around 3M).
    Is anyone aware of a restriction on the size of the XML data file when specifying output formats Excel, RTF or HTML? We have tried setting temp directory but that has not helped.
    Thanks.

    Hi
    I found this at metalink [Note:390968.1].. hope it helps =)
    Symptoms: When attempting to run an XML Publisher concurrent program the following error occurs:
    ERROR: Warning!!! Got out of memory exception, retrying with scalable option..
    Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
    Oracle.apps.xdo.oa.cp.JCP4XDODataEngine
    Program exited with status 1
    Solution: To implement the solution, please execute the following steps:
    1. Login select the responsibility: System Administrator.
    2. Navigate to Concurrent > Program > Define.
    3. Query for concurrent program that is receiving the error.
    4. In the 'Options' field please enter -Xmx512M.
    5. Save the change and retest the issue.
    6. If the report still fails with the option set to -Xmx512M change the value to -Xmx1024M, save and try again
    7. Migrate the solution as appropriate to other environments.

  • Oracle Apps R12 post install fails.

    Hi All, I am trying to install Oracle Apps r12 on Ubuntu 8.10, after everything went good,,,the post install failed with all entries having red cross.
    it said
    HTTP server not responding
    JSP page is not responding
    Database file was created
    Login Page is not responding
    Help page is not responding
    environment file was not created
    Vitual Directory page not responding
    Can some please help me with this, i have been trying to install Oracle Apps R12 for a long long time.
    Thanks.

    Thanks for replying.
    I tried to install Oracle Enterprise Linux 5 but i was not able to connect to the internet with that OS so i chose Ubuntu 8.10. I have Intel wifi 5000 card,,,,which was not working in OEL 5. If you have any fix for that, then I will certainly switch to OEL 5.
    Please help.
    thanks.

  • Flash Player Install Manager[681:16322] Install failed with error code: 30

    OS 10.10, MBP 2011 i7, latest updates. I ran the installer by opening up the app package and invoking the install via terminal. at the 75% mark ( download finishes ) the installer fails. in the terminal I got this maybe helpful error message. any idea on getting flash to install ? its worse because I've run the uninstaller so parts of various websites don't work now
    S

    ok, its a permissions error because the installer isn't at the right run level, even asking for my admin password. if I do
    sudo Install Adobe Flash Player.app
    [enter password]
    Installer now runs. it generates a bunch of error messages in the terminal
    Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder:  dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
      Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
      Reason: image not found
    ——— does this about 10 times ending like this -------
    2014-10-28 22:03:10.831 Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder:  dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
      Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
      Reason: image not found
    2014-10-28 22:03:47.190 Adobe Flash Player Install Manager[764:19989] Install failed with error code: 17.
    the install actually finishes though  and flash is working… YAH ! but only a semi uber geek would ever figure this out or think to try it. please fix the installer as its got a problem under 10.10

  • The PowerShell script failed with below exception

    I'm receiving the following errors on all SQL Express Servers (every machine that has SQL Express inside).
    it seems that the discovery has found SQL Express but could not connect to the instance.
    details on the alerts:
    Date and Time:
    10/22/2013 12:04:22 PM
    Log Name:
    Operations Manager
    Source:
    Health Service Modules
    Generating Rule:
    Collect Power Shell Module Events
    Event Number:
    22406
    Level:
     Error
    Logging Computer:
    SQLEXPRESS.DOMAIN.COM
    User:
    N/A
    Description:
    The PowerShell script failed with below exception
    System.Management.Automation.RuntimeException: Exception calling "Fill" with "1" argument(s): "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not
    accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"
    At line:44 char:19
    + $SqlAdapter.Fill <<<< ($DataSet)|out-null
    at System.Management.Automation.FlowControlNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
    at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
    at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
    Script Name: StolenServerMemory2008.ps1
    One or more workflows were affected by this.
    Workflow name: Microsoft.SQLServer.2008.DBEngine.StolenServerMemoryMonitor
    Instance name: SQLEXPRESS
    Instance ID: {9705795C-4F3B-C2EF-AA7D-C736B40FD6A4}
    Management group: SCOMGROUP 

    Some additional inf.
    http://stackoverflow.com/questions/6466974/unable-to-connect-to-sql-express-error-26-error-locating-server-instance-speci?rq=1
    anyway you can disable this rule/monitor as no control from monitoring solution in that case. Or try to rewrite the same monitor...
    The problem in your case is when function tries to get Max Server Memory MB by connecting to master DB, but you can replace it with performance counter like Target Server Memory (KB)...
    just see the function main in StolenServerMemory2008.ps1 and what you need to replace
    $api = New-Object -comObject "MOM.ScriptAPI"
    $bag = $api.CreatePropertyBag()
    $msg = [Environment]::NewLine
    $err = [Environment]::NewLine
    #try {
    $maxMemoryMB = GetMaxServerMemoryMB $ComputerName $InstanceName
    $stolenPages = (Get-Counter ("\" + $PerformanceCounterObject + ":Buffer Manager\Stolen Pages")).CounterSamples[0].CookedValue
    $pakeSizeKB = 8
    [double]$stolenMemoryMB = $stolenPages * $pakeSizeKB / 1024                                      
    [double]$stolenMemoryPercent = 0
    if($maxMemoryMB -gt 0){
    [double]$stolenMemoryPercent= 100.0 * $stolenMemoryMB / $maxMemoryMB
    $bag.AddValue("StolenMemoryMB", $stolenMemoryMB)
    $bag.AddValue("StolenMemoryPercent", $stolenMemoryPercent)                                  
    $msg += "StolenMemoryMB=$stolenMemoryMB StolenMemoryPercent=$stolenMemoryPercent"
    $msg += [Environment]::NewLine                          
    #debug $api.LogScriptEvent("SQL 2008 Stolen Server Memory data source", $SCRIPT_EVENT_ID, $INFORMATION_EVENT_TYPE, $msg + $err)                     
    #catch {
    #             $header = "Managegement Group: $Target/ManagementGroup/Name$. Script: {0}" -f ($MyInvocation.MyCommand).Name.ToString()
    #             $msg += "Error occured during SQL 2008 Stolen Server Memory data source executing.{0}Computer:{1} {0}Reason: {2}" -f [Environment]::NewLine, $env:COMPUTERNAME, $_.Exception.Message
    #             $api.LogScriptEvent($header, $SCRIPT_EVENT_ID, $ERROR_EVENT_TYPE, $msg + $err)                           
    $bag

  • Javax.security.auth.login.Configuration.setConfiguration() fails with  java.lang.SecurityException: No Permission to set the Configuration

    Hi All,
    I have a custom security class (deployed in an application) that uses JAAS
    to login, i have to set the Configuration in my security handler like this
    Configuration.setConfiguration(new MyConfiguration());
    This fails with
    java.lang.SecurityException: No Permission to set the Configuration
    How do i give this class the permission to set configuration???
    Thanks,
    Ako

    nobody knows?

  • JAI extension automatic installation fail with Java Plug-in 1.4.1_01

    Hi everyone,
    i have a html page with an applet that use the JAI (Java Advanced imaging) extension. I used to run it with java plug-in 1.3.1_03.
    When the JAI extension was not installed, it was automatically downloaded and installed. I use the sun "Signed Auto Installation for browsers" jar available on the JAI download page.
    But with Java Plug-in 1.4.1_01, it seems to have a security problem. Is the "Signed Auto Installation for browsers" only java plug-in 1.3 compatible or is there a way to install it with 1.4.
    If anyone has encountered the same problem with another extension, it could help me to know how to have it installed automatically with java Plug-in 1.4.
    I tested on IE 4 and 6 on Windows NT4 & IE 6 on Windows 2000, and i have the same results.
    Thanks
    Philippe
    see the following java console output :
    Java(TM) Plug-in: Version 1.4.1_01
    Using JRE version 1.4.1_01 Java HotSpot(TM) Client VM
    Modality popped
    User selected: 0
    Optional package download granted by user, download from http://xxxxxxxxxxxxxxxxxxxxxx/jai_windows-i586.jar
    Connecting http://xxxxxxxxxxxxxxxxxx/jai_windows-i586.jar with no proxy
    Connecting http://xxxxxxxxxxxxxxxxxx/jai_windows-i586.jar with cookie "JIGSAW-SESSION-ID=J986902630-19"
    Loading Root CA certificates from D:\PROGRA~1\Java\J2RE14~1.1_0\lib\security\cacerts
    Loaded Root CA certificates from D:\PROGRA~1\Java\J2RE14~1.1_0\lib\security\cacerts
    Loading JPI certificates from D:\WINNT\Profiles\qpbl\.java\jpicerts141_01
    Loaded JPI certificates from D:\WINNT\Profiles\qpbl\.java\jpicerts141_01
    Loading certificates from JPI session certificate store
    Loaded certificates from JPI session certificate store
    Checking if certificate is in JPI permanent certificate store
    Checking if certificate is in JPI session certificate store
    Checking if certificate is in Root CA certificate store
    Checking if certificate is in Root CA certificate store
    Checking if certificate is in Root CA certificate store
    sun.misc.ExtensionInstallationException: User deny optional package installer to be launched.
         at sun.plugin.extension.ExtensionInstallationImpl.verifyJar(Unknown Source)
         at sun.plugin.extension.ExtensionInstallationImpl.access$100(Unknown Source)
         at sun.plugin.extension.ExtensionInstallationImpl$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.plugin.extension.ExtensionInstallationImpl.installExtension(Unknown Source)
         at sun.misc.ExtensionDependency.installExtension(Unknown Source)
         at sun.misc.ExtensionDependency.checkExtension(Unknown Source)
         at sun.misc.ExtensionDependency.checkExtensions(Unknown Source)
         at sun.misc.ExtensionDependency.checkExtensionsDependencies(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.parseExtensionsDependencies(Unknown Source)
         at sun.misc.URLClassPath$JarLoader.getClassPath(Unknown Source)
         at sun.misc.URLClassPath.getLoader(Unknown Source)
         at sun.misc.URLClassPath.getResource(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Modality pushed
    Modality popped
    Optional package installation failed.
    Installation successful

    I seem to be having the same problem. If you figured out the solution, can you please post it?
    Thanks

  • Flash Player Install failed with error code: 30

    Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks.  I'm posting this so the engineers will know what to fix in the next update version.
    I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
    Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark.  The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
    The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
    The FlashPlayerInstallManager.log says:
    2014-04-13 16:12:01 -0500 [I]  IM: ---------- log start ----------
    2014-04-13 16:12:01 -0500 [I]  IM: All install checks pass
    2014-04-13 16:12:01 -0500 [W]  IM: Unexpected umask value for process: 0
    2014-04-13 16:12:06 -0500 [I]  IM: User does not have any processes that need to be closed.
    2014-04-13 16:12:06 -0500 [I]  IM: [install started]
    2014-04-13 16:12:06 -0500 [E]  RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
    2014-04-13 16:12:06 -0500 [E]  RA:
    Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
        NSFileCreationDate = "2014-03-27 04:20:43 +0000";
        NSFileExtensionHidden = 0;
        NSFileGroupOwnerAccountID = 0;
        NSFileGroupOwnerAccountName = wheel;
        NSFileHFSCreatorCode = 0;
        NSFileHFSTypeCode = 0;
        NSFileModificationDate = "2014-03-27 04:20:43 +0000";
        NSFileOwnerAccountID = 0;
        NSFileOwnerAccountName = root;
        NSFilePosixPermissions = 2541;
        NSFileReferenceCount = 1;
        NSFileSize = 13348;
        NSFileSystemFileNumber = 4892044;
        NSFileSystemNumber = 16777224;
        NSFileType = NSFileTypeRegular;
    2014-04-13 16:12:06 -0500 [E]  RA:
    Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
        NSFileCreationDate = "2014-04-07 13:43:21 +0000";
        NSFileExtensionHidden = 0;
        NSFileGroupOwnerAccountID = 0;
        NSFileGroupOwnerAccountName = wheel;
        NSFileModificationDate = "2014-04-13 21:12:06 +0000";
        NSFileOwnerAccountID = 0;
        NSFileOwnerAccountName = root;
        NSFilePosixPermissions = 449;
        NSFileReferenceCount = 12;
        NSFileSize = 408;
        NSFileSystemFileNumber = 4552991;
        NSFileSystemNumber = 16777224;
        NSFileType = NSFileTypeDirectory;
    2014-04-13 16:12:06 -0500 [E]  IM: [install failed: 30]
    2014-04-13 16:12:06 -0500 [E]  IM: Install failed with error code: 30.
    2014-04-13 16:12:06 -0500 [I]  IM: ----------  log end  ----------

    I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
    Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
    ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
    Using the offline installer completely eliminates the errors seen with the stub installer.

  • Flash CS6 AIR error: CreateWinProcess failed with error 2. The system cannot find the file specified

    I created an AIR application in Adobe Flash CS6, but when I test, debug or publish it, an error always occured.
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    When I clicked OK, Flash suddenly stops responding, so I need to end the process using Task Manager.
    I created a blank FLA document and tested and published it, everything's fine there. It was exported properly. But when I do it with the AIR app, Flash can't even start exporting the SWF of the AIP app, and instead gave me the error.
    I speculate that there is something wrong with the Java command line stuff Flash is doing behind the curtain. I tried using ADL myself and get the AIR app working fine.
    I also found out that Flash has its own JRE installed, so I don't have to bother the JRE used by my computer.
    Is there any way to fix this? Thanks in advance. Have a nice day!

    I installed  the update, but I'm sorry to say that it did not solve the problem
    The error is still there as described by Master §ix and Daniel777
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
    In this case, I can't use the simulator to test the applications,
    thanks

  • System Update 5.03 install fails with 'wizard was interrupted'

    I have a W520 that I have upgraded to Win 8.1. I'm trying to install the System Update utility and InstallShield Wizard  fails with:
    InstallShield Wizard Completed 
    The wizard was interrupted before System Update could be completely installed.
    Your system has not been modified. To install this program at a later time, please run the installation again.
    Click Finish to exit the Wizard.
    I've searched for solutions all over the place and come up blank. This usually tells me there is something screwy on my machine or I'm not searching for the right keywords.
    Solved!
    Go to Solution.

    Windows 7x64 - T430s - 2352CTO
    There is a log file but it's too big to post. 
    It can be viewed at https://www.dropbox.com/s/hl420jgyqs8z9oj/tvsuSetup.log?dl=0
    The part where it fails is below:
    InstallShield 8:08:51: Invoking script function InstallSUService
    1: SU service installation failed, please retry the install.
    InstallShield 8:08:52: Setup aborted
    InstallShield 8:08:52: CallScriptFunctionFromMsiCA() ends
    CustomAction InstallSUService returned actual error code 1602 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (E4:78) [08:08:52:146]: NOTE: custom action InstallSUService unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    Action ended 8:08:52: InstallSUService. Return value 2.

  • Error in Creating the Oracle Fail Safe Group during installation on MSCS

    Hi All,
    I am installing ECC 6 dual stack on MSCS.
    I have done steps till CI installation as per installation guide.
    I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
    "Error occurred while working with configuration(scanning)
    MSG:Error while connecting to the database"
    I think it is not accepting the virtual hostname.
    In our scenario CI is running CI node and DB instance is running on DB node.
    I have followed the steps as per the installation guide.
    Please let me know how to resolve this issue.
    Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
    Regards,
    Dinakar
    Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
    Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

    Hi,
    Thanks for your reply.
    1) did you stop the CI before making the modifications as stated in the installation guide?
         Yes
    2) is your database currently running on the same physical cluster node as your CI?
        No.Database instance is running on DB node and CI is on CI node.
    3) is your database online?
         Yes,it is up and running
    Please let me know if there is anyway to resolve this issue.
    Regards,
    Dinakar

  • Install failed with exit code 11?

    Hi,
    I am trying to deploy a language pack and set the override language to English-US which I have created 2 programs for in my package. When the first program runs I am getting an error in the execmgr.log that "Install failed with exit code 11" Any
    ideas what this means? When I run this command manually on the machine it works fine:
    "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
    I checked the dism.log as well but I don't see any errors. Both logs are below, any help or suggestions would be greatly appreciated TIA
    <![LOG[Command line = "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab", Working Directory = C:\WINDOWS\ccmcache\4j\]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr"
    context="" type="1" thread="4976" file="scriptexecution.cpp:352">
    <![LOG[Running "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab" with 32bitLauncher]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr" context=""
    type="1" thread="4976" file="scriptexecution.cpp:370">
    <![LOG[Created Process for the passed command line]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="scriptexecution.cpp:513">
    <![LOG[Raising event:
    [SMS_CodePage(437), SMS_LocaleID(1033)]
    instance of SoftDistProgramStartedEvent
     AdvertisementId = "LIA20115";
     ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
     CommandLine = "\"C:\\WINDOWS\\System32\\Dism.exe\" /online /add-package /packagepath:\"en-us\\lp.cab\"";
     DateTime = "20150127130028.509000+000";
     MachineName = "";
     PackageName = "";
     ProcessID = 2012;
     ProgramName = "Install";
     SiteCode = "";
     ThreadID = 4976;
     UserContext = "NT AUTHORITY\\SYSTEM";
     WorkingDirectory = "C:\\WINDOWS\\ccmcache\\4j\\";
    ]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:715">
    <![LOG[Raised Program Started Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976"
    file="executioncontext.cpp:459">
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
    date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
    date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
    <![LOG[MTC task with id {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}, changed state from 4 to 5]LOG]!><time="08:00:28.525+300" date="01-27-2015" component="execmgr" context="" type="1" thread="5904"
    file="execreqmgr.cpp:6288">
    <![LOG[Program exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="scriptexecution.cpp:676">
    <![LOG[Looking for MIF file to get program status]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="executionstatus.cpp:282">
    <![LOG[Script for Package:LIA002A0, Program: Install failed with exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="3" thread="2488" file="executionstatus.cpp:252">
    <![LOG[Raising event:
    [SMS_CodePage(437), SMS_LocaleID(1033)]
    instance of SoftDistProgramErrorEvent
     AdvertisementId = "LIA20115";
     ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
     DateTime = "20150127130028.650000+000";
     ExitCode = "11";
     MachineName = "";
     PackageName = "LIA002A0";
     ProcessID = 2012;
     ProgramName = "Install";
     SiteCode = "";
     ThreadID = 2488;
     UserContext = "NT AUTHORITY\\SYSTEM";
    ]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="event.cpp:715">
    <![LOG[Raised Program Error Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488"
    file="executioncontext.cpp:572">
    <![LOG[Execution is complete for program Install. The exit code is 11, the execution status is FailureNonRetry]LOG]!><time="08:00:28.665+300" date="01-27-2015" component="execmgr" context="" type="1"
    thread="1956" file="execreqmgr.cpp:4165">
    <![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
    file="executionrequest.cpp:9041">
    <![LOG[MTC task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D} deleted successfully.]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
    file="executionrequest.cpp:9070">
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
    date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
    <![LOG[Deleting request for program Install. Failing parent program InstallEN]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="execreqmgr.cpp:8147">
    <![LOG[Requesting MTC to delete task with id: ]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9041">
    <![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
    <![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
    file="executionrequest.cpp:9041">
    <![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
    date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
    015-01-27 08:00:28, Info                  DISM   DISM.EXE:
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE:
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.3.9600, Running architecture=x86, Number of processors=4
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Dism.exe version: 6.3.9600.16384
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Executing command line: "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
    2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Loading Provider from location C:\WINDOWS\System32\Dism\FolderProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Connecting to the provider located at C:\WINDOWS\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE:
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2015-01-27 08:00:28, Info                  DISM   DISM.EXE:

    Thanks, it seems as though it is not doing anything now. I just see that the policy has arrived in the log below but it is not installing it? The dism.log hasn't changed at all so it seems that it isn't even executing the command now? Am I missing something
    else? I even tried re-advertising it though client center.
    Command is now:
    C:\WINDOWS\sysnative\Dism.exe  /online /add-package /packagepath:"en-us\lp.cab"
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:52:28.943+300"
    date="01-27-2015" component="execmgr" context="" type="1" thread="5036" file="event.cpp:405">
    <![LOG[Policy arrived for child program Install]LOG]!><time="09:12:48.440+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6867">
    <![LOG[Policy arrived for parent package LIA002A0 program InstallEN]LOG]!><time="09:12:48.487+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6893">
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="09:12:48.487+300"
    date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:405">
    <![LOG[Raising event:
    [SMS_CodePage(437), SMS_LocaleID(1033)]
    instance of SoftDistProgramOfferReceivedEvent
     AdvertisementId = "LIA20116";
     ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
     DateTime = "20150127141248.502000+000";
     MachineName = "";
     ProcessID = 2012;
     SiteCode = "";
     ThreadID = 3528;
    ]LOG]!><time="09:12:48.502+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:715">
    <![LOG[The user has logged off.]LOG]!><time="09:36:59.174+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4320" file="execreqmgr.cpp:5138">

Maybe you are looking for

  • Error while parsing xml document that file name is Japanese.

    who can help me. when my xml file name is Japanese. Error occurs while parsing. the error message is "ORA-20100: Error occurred while parsing: No such file or directory" thanks.

  • Chapter one won't play

    This is odd. I have several chapters in my movie (created in FCP). They all imported fine into DVD SP. I used a DVD SP template, everything works great in the simulator. I burned the disk as disk image. Everything plays fine on the computer. But when

  • Adding Dates To Query

    What I am trying to achieve. I have 3 tables. tblCUSTDETAILS - Contains Customers Information. tblFLTNUMS - Contains Faults The Customer Has tblCONTACTS - Contains The Monthly Volume of Contacts by the Customer. What I want to do is show the amount o

  • Disaster Recovery - Managed Server Startup

    We are testing some disaster recovery and want to be able to start our managed servers on our B node in MSI mode while the A node with admin server is down. It tests fine and works with nodemanager running. However, we want to assume that there has b

  • OMS patch  post-install procedures fail

    Hello, It might be a long shot, but I have to ask for suggestions: Doing PSU7 upgrade on the OMS server (11.1 EMGControl) , the last step (after OPatch apply) is to have "apply.sql" run: $ORACLE_HOME/bin/rcuJDBCEngine [email protected]:1521:GRIDREPO