Post moved Connected new Samsung TV to my LAN but...

Moved http://community.bt.com/t5/Other-BB-Queries/Connected-new-Samsung-TV-to-my-LAN-but-has-problems/td-p...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Hi Sprucie and welcome
Firstly, can you remove the image you've posted as it gives the hub's SSID and your wireless password for connecting to it. Although the odds must be huge, if anyone near you read this and realised it was your hub, they would be able to connect to it.
Secondly, from that screen, click advanced settings, continue to advanced settings and click on wireless. From there select another wireless channel, either channel 1, 6 or 11. Click apply when you've done this. Also the distance from the hub will affect the connection speed - how far away is it? - do other devices in the same room also operate slowly?
Installing inSSIDer on a wireless enabled laptop would also be beneficial as you would be able to see what channels are used in your area - you're best to avoid heavily used channels.
Also, ideally connecting via an ethernet cable would solve all this - but this isn't always practical. You could use powerline adapters
-+-No longer a forum member-+-

Similar Messages

I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air. I can connect to samsung soundbar with my mac but the connection drops immediately. Please help MacBook Air, iOS 10.9.4

I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
MacBook Air, iOS 10.9.4

Contact Samsung for help.
Barry

Post Moved Connecting-hub-3-infinity-to-smart-tv

Post moved http://community.bt.com/t5/Other-BB-Queries/Connecting-hub-3-infinity-to-smart-tv/td-p/616324
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

ABG wrote:
I bought a wireless Panasonic smart tv and keep on having issues with the wireless connection to my hub 3 infinity
I have a netgear router and I connected it up to the tv but the viera connection was not connecting to the router ,so i could not connect ,can any one help
I still cannot believe that even with infinity i still cannot get a strong wifi connection in my house .
It would be better to avoid wireless, and use a direct Ethernet cable or powerline adapter.
See Network connection problems and possible solutions
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Post Moved Infinity-New-install-today

Post moved to Inifinity Board http://community.bt.com/t5/BT-Infinity/Infinity-New-install-today/td-p/682502
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Contact the mods or speak to BT, only in extreme cases they will deal within the first 10 days but to me it's very clear something is wrong with your line.
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Post Moved Connection to the Internet

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Connection-to-the-Internet/td-p/522313
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I think you need to upgrade firmware on the router using www.linksys.com/download & definately you will be able to go ONLINE!!!!!

Post Moved Can't use Openzone or FON. But I could...

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Can-t-use-Openzone-or-FON-But-I-could-yesterday/td-p/547...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I had an online chat with a BT Broadband help person, who said she wasn't trained on Openzone and gave me a number to call, where I got a recorded message saying that the BT wi-fi network had "issues". A few hours later the problems disappeared and today everything's fine. So who knows.
Regarding Ts and Cs, if Openzone is bundled with your Total Broadband package there's no volume or time limit, you just have to log in every 30 mins if you go over 10,000 minutes in any given month. Large files are positively encouraged: "Is there a download limit? No. Wireless broadband is perfect for uploading or downloading large files at high speed. Usage is based on time rather than data transfer amount." From https://www.btopenzone.com/help/common-questions/index.jsp#using_8 I'm downloading 50GB+ files via P2P. But perhaps the BT network sees them as lots of small files, as P2P works by chopping them into little bits.
The Openzone Fair Use policy only applies if you buy an Openzone subscription separately. In which case P2P, large files and a 3GB+ monthly volume are "inappropriate". http://www.btopenzone.com/terms-and-conditions/fair-usage-policy.jsp
DS, what did you mean by clearing the connection history? Sounds interesting. Do you mean removing the profile from the Manage Wireless Networks screen?

Just added new Mac Mini to my LAN but cant see PCs either direction!?

Can someone point to a foolproof tutorial on all required settings to get these 2 systems to play nice please?? All my Windows 7 PCs, with File Sharing on can see each other but they can't see the Mac with File Sharing turned on, nor can the Mac see any of the Windows PCs!

Mac 101: File sharing
Learn about File Sharing in Mac OS X v10.5 and later in this article. File sharing allows your Mac to share files and folders with other computers on your network.
http://support.apple.com/kb/HT1549
Dah•veed

Connecting to a database on a LAN

I have developed a system and it runs well. The only problem is that, it can not run on the client machine accessing the server database on another machine. I suspect that my connection to the database may not be fit for a LAN batabase connection. Below is some of the code I use to connect to the database on a LAN, but I have put a static address here such that it is not difficult for you guys to get (understand) what I want to achieve.
try
                Class.forName("com.mysql.jdbc.Driver").newInstance();
                conn = DriverManager.getConnection("jdbc:mysql://12.4.6.34/mydatabasename","root","**************");
catch(Exception e)
           System.out.println(e);
              When the above code is run the below exception is thrown
** BEGIN NESTED EXCEPTION **
java.net.SocketException
MESSAGE: java.net.ConnectException: Connection refused: connect
STACKTRACE:
java.net.SocketException: java.net.ConnectException: Connection refused: connect
        at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:156)
        at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:284)
        at com.mysql.jdbc.Connection.createNewIO(Connection.java:2555)
        at com.mysql.jdbc.Connection.<init>(Connection.java:1485)
        at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266)
** END NESTED EXCEPTION **
Last packet sent to the server was 16 ms ago.
debug:
BUILD SUCCESSFUL (total time: 1 minute 4 seconds)However if I put the IP Adress 127.0.0.1 instead of 12.4.6.34 or instead of any other non 127.0.0.1 address, the system runs perfectly. So the question is where am I going wrong in specifying the database on another machine.

Yes the database is running but being accessible, I
am not sure because I am not able to test
accessibilty over a LAN.Why not?
If you can help, the DBMS is
mysql. How do I make it accessible?Get a DB browser.

Post Moved New-to-BT-Infinity-only-just-works-an...

Post Moved toInfinity Board http://community.bt.com/t5/BT-Infinity/New-to-BT-Infinity-only-just-works-and-only-1Mbps/td-p/866208
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

They installed a new master socket etc when they put the modem in. There is no phone plugged into the master but there are 3 phones AFTER the master socket (extension terminals inside socket, after filter I guess) . I think they tried it with all those disconnected. As for the signal, I mean the DSL light takes ages to actually come on and sync. I don't use wireless here. I have a long Cat5e cable from modem to bt hub then 2 computers and a CCTV box coming off the hub via LAN.
Property is a farmhouse on unmade track with no other properties nearby served by the phone wires. We are approx 1000m from the main road. I think if they could connect the wires into the cabinet at and of my track they might get the claimed speeds. I did a test using a known phone number of a house near that cabinet and it came back as 64mbps quoted , so theres obviously fibre in that cabinet.
One more thing, there is currently broadband on another line in the same cable coming up my track, which is on my business line, I have kept this running but when infinity working better it can be cut off. I wonder if there could be any interference from one pair of wires to the other having 2 broadband signals travelleing 1000m together. Probably not but just trying to think of everything.

Connecting Macbook to new Samsung LCD

Apologies if its been asked before but I cant figure out the technical mumbo jumbo
I have a C2D Macbook with Leopard and now want to connect it to my new Samsung 26 LCD to watch videos which have been stored on my mac.
I know I have to buy a chord for that (which one) but will the picture quality be okay? The Samsung model is LA26A450C1 and it has a resolution of 1366 x 768. Do I have to plug it in AV or HDMI and is my LCD compatible with the macbook?
Again, sorry for such a basic question.
Message was edited by: Tanya Palta

You have three optional adapters to get the video signal out of the MacBook through the built-in mini-DVI port:
mini-DVI to DVI, chained with an additional DVI to HDMI adapter/cable, for the best digital signal. (recommended option)
mini-DVI to VGA, for an analog signal with a VGA/Dsub15 computer monitor cable.
mini-DVI to Video (either S-Video or Composite) for an analog signal, usually for PAL or NTSC equipment.
you will also need to run an audio cable from the little headphone jack on the MacBook to a AUX line-input on your stereo or TV.

TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Connecting my Macboook late (2008) to my new samsung LCD TV

So I have a aluminum unibody macbook late (2008) and Im trying to connect it to my new samsung TV. I purchased the hdmi cords along with the hdmi adapter to plug into my macbook. I can get the display to show on the TV, but the sound is missing from the hdmi port. I also tried using an RCA cord for the audio, but the sound only works on the tv if i dont switch the source to hdmia and just leave it on TV. It's as if the hdmi and the audio are kept separate. Does anyone know how I could get it working?

When you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

HT1665 I am trying to connect my Samsung Bluetooth device with my new Iphone 4S. Can anyone explain how this is done?

I am trying to connect my Samsung Bluetooth device to my new Iphone 4s. Can anyone explain how this is don?

Which Samsung Bluetooth device?
Please note that the iPhone will not pair with other phones, tablets, etc for purposes of file transfer.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Post Moved Cannot-connect-through-anonymous-prox...

Post moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Cannot-connect-through-anonymous-proxy/td-p/650446
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

You could try reading about wingates, socks and proxies (oh before i forget, turn off java, javascript, cookies, what's related, and smart update ... if you are using IE you're not very smart). Also try installing a firewall, or DHCP or you can learn from me!Here is the info of best 10 proxy software, from which you may try: http://www.techyv.com/article/top-10-free-proxy-software

Post moved Connected new Samsung TV to my LAN but...

Similar Messages

Maybe you are looking for