PostgreSql JDBC from Red Hat Linux works on Windows not on Linux

I started using ODI from a Windows XP box in development and Beta, and was successfully connecting to and loading data from several different database platforms including a PostgreSql database. I copied the PostgreSql JDBC driver to the ODI drivers folder, set up the connection information and it worked. When I moved from Windows XP to "Red Hat Enterprise Linux AS release 4 (Nahant Update 6)", I could no longer connect to this PostgreSql database. I put the same driver jar file "postgresql-8.3-603.jdbc3.jar" in the drivers folder and used the same connection string. All of the other drivers (Oracle, MS SQL, etc.) in that driver folder work correctly on this Linux box. I can even tell ODI to connect to the PostgreSql through the agent on the Windows XP machine and it works. That suggests that the URL must be OK, but for some reason it can't connect from the Linux box. I also tried updating to the newest driver"postgresql-8.3-604.jdbc3.jar" with no success.
Any Ideas on what I may have missed?

I started using ODI from a Windows XP box in development and Beta, and was successfully connecting to and loading data from several different database >>>>platforms including a PostgreSql database. I copied the PostgreSql JDBC driver to the ODI drivers folder, set up the connection information and it worked.
When I moved from Windows XP to "Red Hat Enterprise Linux AS release 4 (Nahant Update 6)", I could no longer connect to this PostgreSql database. I >>>>put the same driver jar file "postgresql-8.3-603.jdbc3.jar" in the drivers folder and used the same connection string.
All of the other drivers (Oracle, MS SQL, etc.) in that driver folder work correctly on this Linux box. I can even tell ODI to connect to the PostgreSql through >>>>the agent on the Windows XP machine and it works.
That suggests that the URL must be OK, but for some reason it can't connect from the Linux box. I also tried updating to the newest driver
"postgresql-8.3-604.jdbc3.jar" with no success.
Any Ideas on what I may have missed?Hi,
I'm having a problem in connecting to a PostGreSQL database, I was just wondering how you did it? I'm using a Windows Server 2003 R2 Standard Edition.
Thanks,
Randy

Similar Messages

Printing from Red Hat Linux via command line - Landscape

Hello, First off, I am unable to print via the command line using this command: cat o3700491.out | /usr/bin/acroread -toPostScript -landscape | lp -dPrinterName The error I receive is: <stdin>: lp: stdin is empty, so no job has been sent. any ideas?

Hi Scott, In this case, the error message is coming because acroread is expecting a pdf file in the standard input(stdin). And as it gets a non pdf file, it does not get processed. Try the command using a pdf file : cat a.pdf | /usr/bin/acroread -toPostScript -landscape | lp -d <PrinterName> This will surely work. I hope you are using 8.1.3 version of acroread. Please feel free to come back in case of any issues. Regards, Rishi

Have anyone upgraded Red Hat Linux AS from 4.4 to 4.6 of EBS11510.2(CU2)?

Hi,
Have anyone upgraded Red Hat Linux AS from 4.4 to 4.6 of EBS11510.2(CU2)?
Please advice any issue/concerned etc?
Thanks,

You need to relink all binaries after an OS Upgrade to ensure that everything is working as expected.
- Take a backup of the application/database
- Upgrade the OS
- Relink all binaries
- Start up the application/database
- Take another backup once you confirm that everything works properly
Note: 356878.1 - How to relink the whole Applications 11i Installation
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=356878.1
Note: 131321.1 - How to Relink Oracle Database Software on UNIX
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=131321.1
Note: 407055.1 - Process To Upgrade the Operating System and Oracle Database Server
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=407055.1

DB lookup problem with Sun One App. Server 7.0,MySQL3.x - Red hat linux 7.2

Hi Group,
I have deployed my project in sun one application server 7.0 installed in red hat linux 7.2 and database is mysql. Its working in fine in normal conditions. I could not able to get connection from datasource after I kept my server 10 hours ideal. Again its working fine once I restarted the server. Please give me any solution to prevent this.
The same project is working fine under all conditions in Sun one app server 7.0 installed in windows 2000 server without any look up probem. I Got this problem only in linux OS.
mysql datasource class com.mysql.jdbc.jdbc2.optional.MysqlDataSource
please find the below code..
Context ctx = new InitialContext();
Datasource testDS = (javax.sql.DataSource)ctx.lookup( "jdbc/testDS");
Connection con = testDs.getConnection();
connection pool settings
<jdbc-connection-pool steady-pool-size="8" max-pool-size="32" max-wait-time-in-millis="0" pool-resize-quantity="2" idle-timeout-in-seconds="0" is-isolation-level-guaranteed="false" is-connection-validation-required="false" connection-validation-method="auto-commit" fail-all-connections="false" datasource-classname="com.mysql.jdbc.jdbc2.optional.MysqlDataSource" name="testCP">
<property value="localhost" name="serverName"/>
<property value="3306" name="portNumber"/>
<property value="root" name="user"/>
<property value="test" name="databaseName"/>
</jdbc-connection-pool>
Regards,
Hari haran

My team solved the problem and I thought that we would share.
The version of Xalan that was packaged with the JRE, that is installed by the Sun One app server, was at least 2 versions out of date. Updating the Xalan package solves the issue and the WAR file now works.
Again, this appears to be only on the Linux version as the package deploys and works perfectly on the Windows version.

Failed Installation of Oracle8i on Red Hat Linux 7.0

Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.
null

Richard,
It's a glib problem. 8i uses the glib 2.1 libraries, while RH7 uses the 2.2. There is a patch available from oracle support, or you can find a solution that has worked for me twice on the otn discussion forum.
Cory Franzmeier
<BLOCKQUOTE>quote:<HR>Originally posted by Richard Yip ([email protected]):
Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.<HR></BLOCKQUOTE>
null

Installation of OracleAS 10g on Red Hat Linux ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Problem installing Oracle 8.0.5 on Red Hat Linux 7.0

Hi,
Due to a software requirement, I have to install Oracle 8.0.5 on Red Hat Linux 7.0. (I know Oracle 8.0.5 is pretty old and so as RH Linux 7.0 but that is what required).
I downloaded the Oracle8051EE_Intel.tgz from Oracle and tried to installed it but it didn't work.
It crashed out when it tried to run some of the SQL script during the installation using SVRMGRL. Later on, we found out all the binaries under $ORACLE_HOME/bin were corrupted during the installation. We did a comparison of the size of SVRMGRL and SQLPLUS and they are different from the Stage (or the one from the .tgz).
Does anyone have this problem before? Will 8.0.5 works on Linux 7.0?
Thanks in advanced for any help.
Best regards,
William
null

I'm having the same exact problem. The link you have provided
seems to be a bad link. I would really appreciate it alot if you
could help get us through this first step of starting the oracle
installer interface. I never thought it would be this hard to
get started.

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

Oracle Upgrade 8.1.7.4 to 10g in Red hat linux

Dear All,
We are planning to upgrade our oracle database from 8i to 10g along with the Redhat linux upgrade from 2.4.9-e 27 ent to Red Hat Linux 5. In my study and also from Installation guides and oracle upgrade guides I made sure that its possible to upgrade our database from 8.1.7.4.
So I have planned the below options to do the same and not sure about the possibilities. If anyone have thoughts and idea on the same please suggest me.
We dont have plan to migrate the development hardware and the sap version is 4.7E
Option 1: Upgrade the Linux to 5 and then upgrading the database to 10g usign upgrade assistant tool
Option 2: Export the database using sapinst tool and then crashing the server. Installing linux5 and importing the database using sapinst tool.(I am aware this is not a good idea since there is no migration in hardware but it will be helpful in production since we are migrating the production system).
Option 3: Performing DBUA assistant in development and sapinst method in production.(helpful in disaster recovery)
Could you please suggest on the same?
My query is that.
If i am performing oracle export from 8.1.7.4 and if i am import the same in oracle 10g using the sapinst tool. Will this work? or it will create a problem in table level. I am looking for answers for this Question. Kindly explain me on this.
Regards
Vijay

Re: Restoring data from 9i to 10g
The above link was useful to me
Regards
Vijay

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

BI 4.1 installation in Red hat Linux 6.5

Hi Experts,
we are planning to have one cluster environment in Red hat Linux 6.5.
1) Two nodes in cluster ( two red hat Linux 6.5 servers)
2) 1 server with Websphere as a web application server.
From the last two years i am completely working on windows environment. hence i would like to know few details about installing BI 4.1 in RHL 6.5.
What are the prerequisites to install Bi 4.1 in RHL 6.5, Even though it mentioned in installation guides, i would request someone to share there real time expertise.
I would like to have split deployment in the webapplication server ( Websphere ).I have performed the split deployement with ref of the below document which was created by James Rapp Improving the User Experience in SAP BI Platform - BI 4.1 and Apache 2.4 Supplement
it completely talks about tomcat+ Apache.
is it possible to perform the websphere + Apache split deployment.
Kindly share your expertise.

Hi Prasad,
Below are my thoughts on your queries.
1. Check Installing SAP BI 4.1 SP01 on Red Hat Enterprise Linux 6.x Step-by-step. This is an amazing blog by Brian. Hope you find it useful.
2. You cannot do a split deployment with Apache and Websphere. However you can do it with IHS (Web server provided by IBM) plus websphere. If you are using Websphere Network deployment version, IHS must be installed by default. For performing the split deployment, check https://websmp206.sap-ag.de/~sapidb/011000358700000171102014E/sbo41sp3_bip_wapd_unix_en.pdf See section 4.4.2 on page 27
Hope it helps.
Regards
Chinmaya

FMS RED HAT LINUX PROBLEMS

Hi,
I hope that someone can help me. I am having so much trouble
getting FMS to work it is unbelievable.
We have installed FMS onto virtual server running Red Hat
Linux Enterprise 3. We have managed to get
FMS running but cannot get a connection to work. This is
using the sample application 'textchat'. here is a summary of what
we and a coleague have done.
1) I have linked the libraries to obtain the desired
libssl.so.4,
libssl.so.6, libcrypto.so.4 and libcrypto.so.6.
2) I have installed the lates mozilla firefox and the latest
flash
plugin (together with the update-flashplugin)
3) Then I have created the installation by adding the
following entry:
/etc/redhat-release together with it's content
4) Then I have performed a regular fms installation together
with adding
the licensing etc. I have also copied the textchat main.asc
file and the
textchat pages (swf and html)
So basically we have added all the missing libraries (that we
know of...cmon adobe get it together £3000
and you don't even include relavent libraries) .
If any body has any ideas please reply. we are almost a month
down the line struggling with this software.
Thanks for an help
Paul

Got Oracle Grid Infrastructure 11.2.0.3 to work on Red Hat Enterprise 6.3 Linux with out using asmlib and oracleasm.
SQL> alter system set asm_diskstring='/DATA/','/FRA/' scope=both;
SQL> show parameters asm_diskstring
NAME TYPE VALUE
asm_diskstring string /DATA/, /FRA/
SQL> create diskgroup FRA external redundancy disk '/FRA/';
Diskgroup created.
SQL> select name,state, total_mb, free_mb from v$asm_diskgroup;
NAME STATE TOTAL_MB FREE_MB
DATA MOUNTED 500,000 494,000
FRA MOUNTED 200,000 194,000
The issue I had encountered that was that I tried to install and configure Grid Infrastructure the way that I had previously using Red Hat Linux 5.5, 5.8 and then 6.0. I had decided to install Red Hat Linux 6.3 which does not support Oracle asmlib and oracleasm to keep up with the technology and to be innovative.
Oracle has added significant enhancements to Grid Infrastructure. The only way to become aware of these enhancements is to "Do It". I've documented this implementation and will now

Oracle 10g Installation on Red Hat Linux

Hi
I am trying to install Oracle 10g (Downloaded from Oracle Site) in a Linux Installation. I have checked with the following command about the Linux Version
# cat /etc/issue and the output is :
Red Hat Linux Release 7.1 (Seawolf)
Kernel 2.4.2-2 on an i686
Then I am giving #uname -r and the output is
2.4.2-2
Now Oracle Installation Guide for 10g for Linux is saying that
if the errata level is less than 25 on x86 system then install latest Kernel Updates.
Please Let me know from where I can get the Latest Kernel Updates appropriately and what I need to do to put that patch into Linux so that I can smoothly install the Oracle 10g.
Thanks and regards.
Keshav Tripathy

Jer is absolutely right.... just changing the values in oraparm.ini to reflect your kernel distribution will work for you.
For example the file contains:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3
now to add your linux into it just check your version by issuing the command #uname -r
in my case the output was "2.4.20-8smp". I just appended redhat before this value and entered in the oraparm.ini file.
The new ini file looks like:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3,redhat-2.4.20-8smp
[Linux-redhat-2.4.20-8smp-optional]
TEMP_SPACE=80
SWAP_SPACE=150
MIN_DISPLAY_COLORS=256
Now you are all set to install. I assume that all other pre-requisites have been fulfilled.
Thanks & Regards,
Rajesh Kumar
Team Lead UNIX

Oracle 8i Internet for Red Hat Linux

Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you

Let me try again. I was to fast with the enter key. There is a known bug with the installer. The work around is to use the runInstall.sh that is in the subdirectory /install/linux. If you have your environment variables setup correctly this should work, also you need a minimum of 128 meg of ram on the machine.
Hope this helps.
<BLOCKQUOTE>quote:<HR>Originally posted by hhtham ():
Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you<HR></BLOCKQUOTE>
null

After installing glibc patch (oracle9i - red hat linux 8)

My oracle9i was working fine on red hat linux 8. but after installation of a glibc patch
"glibc-2.1..3-stubs.tar.gz" something has gone wrong. it has renamed executables by appending/suffixing
zero '0' to the filenames. e.g sqlplus is sqlplus0
i cannot find my sqlplus? i am afraid to restart the system?
should i restart? what is the problem?

Whenever you re-link Oracle, it makes backup copies of the executables (appending 0 to the filename). However, you should have a new SQLPLUS. I would suggest just doing a
relink all
from a command prompt as user Oracle and see if that helps.

PostgreSql JDBC from Red Hat Linux works on Windows not on Linux

Similar Messages

Maybe you are looking for