Posting date wise PM order actual cost

Hi friends ,
I want a report where I can see the actual cost of PM orders , posting period wise :
Say an order's basic start date =  26.7.2011
material is reserved on the order on 29.7.2011 with planned cost Rs100 .
Now reservation is issued with MIGO with posting date  2.8.2010
Now I want a report where I can see this cost by posting period.
Say if I enter 1.7.2011 to 31.7.2011 then cost should be zero .
only cost should come when i will enter 8th month .
One more point should be there the report should not consider controlling area's currency .
Because our controlling area currency is USD and cost in our orders is in INR
Regards
AM

S_ALR_87012993 
Enter
controlling area
fiscal year
from month
to month
Enter order or order group  or leave it blank
Execute
Double click the actual value you want to see
A small screen - select report will appear
Double click 
Orders actual line items
click change layout    select posting date

Similar Messages

  • Report  for bom wise target and actual cost as well as qty at line item

    Dear Experts,
    Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
    there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
    I want to see line item wise breakup/bom wise target and cost cost as well as qty.
    Thanks in advance.
    regards
    RK

    Dear experts,
    I am still looking for a revert.
    regards
    RK

  • Posting date on sales order to invoice

    hi all,
    I hope any can help, i need pass the posting date from sales order to an invoice,
    this is after made an sales order this sales order convert to invoice so i need the same posting date i have on sales order in the invoice.
    thnks for the help
    Humberto

    Another way of using is going deeper and modifying the SP_SBO_TransactionNotice store procedure to pull up the sales order posting date and passing that value to the invoice posting date.
    I know that this answer belongs in the SDK section of the forum, but its also another way of doing it; besides formatted searches have there restriction and it not always work in certain circunstances like using copy to.
    Regards,
    WB

  • How to see cost componentwise production order actual cost-not planned cost

    Hi,
    Can anybody tell me how to see cost componentwise production order actual cost ?
    Thanks,
    Bijay

    Hi,
    CO03->Goto-> costs-> Anlysis
    or use the std. report KKBC_ORD
    std. reoprt MCRI
    KVBI - Actual Costs
    Regards,
    R.Brahmankar

  • Posting date in settlement order

    Hi experts,
    I have problem with posting date in settlement order.
    when I run settlement KO88 or KO8G, SAP take posting date as the last day of the month, so in FI runs the validation that I cannot post with a future date.
    My question is: How can I change the posting date in settlement order? Instead of change the posting date manually, I want SAP use posting date as the system date, because I would schedule the transaction every day.
    Please help me.
    Thanks,
    Gaetano

    Scheduled the program RKO7KO8G.
    Solved.

  • Process Order Actual Cost?

    Dear Experts,
    I understand that we need to run KSII - Actual Activity Price Calculation first before we run the Revaluation of Orders using CON2 in order for us to get the actual cost updated in FI at the end of the day.
    Somehow, in SAP Best Practices (BPD) Business Process Documentation, never ask us to run KSII and CON2.  It just asked us to run KKS1(variance calculation).
    My question is that do we need to run KSII and CON2 to get the actual cost updated in FI or just KKS1 will do?
    regards,
    Abraham

    Dear Abraham,
    What i know is the step that you running in Product Costing is:
    1. KSS2 (Actual Splitting) --> you split the cost in Cost Center by Activity Type 
    2. KSII (Actual Price Calculation) --> you calculate the activity type price per Cost Center, you can see the result in KSBT
    3. CON2 (Revaluate Activity Price) per Plant --> you allocate the expense in cost center to process order
    4. KKS1 (Calculate Variance) per Plant --> you calculate the variance between Actual Cost vs Standard Cost (Standard Cost is come from SCE (Standard Cost Estimate) process)
    5. CO88 (Process Orders Settlement) per Plant --> you settle the cost in Process Order to Material
    From step 1 to 3 there is no update in FI just in CO, when you execute report S_ALR_87013611 you can find the allocation result and you can find Actual Activity per Activity Type.
    In step 4, KKSI you only can  calculate the variance between Actual Cost vs Standard Cost.
    Posting in FI is happen in step 5, when you settle the cost in Process Order to Material (CKMLCP).
    Your question is that do we need to run KSII and CON2 to get the actual cost updated in FI or just KKS1 will do?
    My answer is yes, and you also have to run SCE to get the Standard Cost first.
    Thanks,
    Ferdinand

  • Results analysis for sales orders- actual costs/ revenues - (kka3-kkak)

    Hi, i have a problem when I execute the individual results analysis for sales orders (kka3) I can see actual revenues and actual costs, however when I execute the collective processing (kkak) for the results analysis I don´t see these (actual revenues and costs). Is it normal? How can I see these in the collective processing?

    Could be one of these possibilities:
    1) Controlling Area set is wrong
    2) You're input parameters are insufficient to get that sales order. Check Order Type etc you input in the main screen
    3) The master data is wrong which is not allowing the link to the Sales Order. You would have to check each field thoroughly.
    You will have to probably do a lot of checks before you resolve this. This isn't normal btw....you should see all Sales Orders
    Assign Points if useful....

  • Tax Code removed on changing the posting Date in Purchase Order

    Dear All,
    This is with reference to the Purchase Order Document tax part, the document has been defined with the approval procedure and document series followed as annual series. The document series is linked to the period indicator as I am using the monthly series for the A/R & A/P Invoice.
    Now some Purchase Order was generated in the last month i.e. 30 NOV 07 which has gone for approval. These document are approved in the current month (Dec 07) & user are trying to add the records it displays the message as "Date deviates from permissible range [Purchase Order - Posting Date]  [Message 173-11]" as the period indicator is changed to Dec 07 in document numbering.
    The problem is when user changes the document date to Dec 07 for posting; system removes the tax codes, which is available in the document. Now as this is approved document user is not able to change or renter the tax codes.
    In this situation what can be done as the same case will again happen for the next month.
    Pls. provide the solution / work around for this problem.
    Regards,
    Yogesh Jadav

    hi yogesh,
    Cancel/Close the created purchase order.
    First you should change docduedate in posting period upto december 2007/end of fiscal year,by following the below path.
    (Administration->sytem intialization-> general settings--> posting period tab)
    Create a new purchase order.
    Send it for approval,authorizer can change date as required,
    once the posting date changes,tax code get refreshed,authorizer
    need to select tax code once again.
    <b>Tax code normally get refreshed when you change posting date it's normal
    system behaviour.</b>
    After authorizer does above changes,he can approve purchase order.
    Once purchase order is approved,orginator can add it as purchase order in draft stauts.
    <b>After approval we can not do any changes in purchase order.</b>
    Hope my solution will solve the problem.
    Thanks,
    With regards,
    A.Jeyakanthan

  • Report to view the per unit of Production Order Actual cost

    Dear All,
    As we see the per unit cost of FG materail,when we estimate the cost by CK11N for FG materail,
    Is there any standard report available to view the per unit ACTUAL cost  of FG Materrial (Primary & Secondary Cost Element wise ) either from CO or PP.
    Please share the report T Code.
    Regards
    Su

    Hi
    you need to make a report in KKO0 as per your requirement
    OKN0 settingss are required.. I have explained that in forum many times.. Re: Report of production : Standard cost + variance
    br, Ajay M

  • Trail balance Posting date wise .

    Hello all,
    My Cleint want trail balance Date wise reporting.
    We had done go live on 27.11.2011
    They want a reporting of that date .
    I am trying in F.01 ,
    In special evaluation there is option of
    Alternative period selection here I am giving date : 27.11.2011
    but there are giving whole month reporting.
    As include posting of 28-30 th nov.
    PLs reply is too Immediatte

    Date Wise Financial Statements
    Hi Sharif,
    Greetings for the Day,
    I have a very small doubt in this.
    While creating the BASIC SET in GS01: say CALLED.... here we are giving FROM VALUE as 50000 - CALLED UP CAPITAL NOT PAID.
    Can you explain me on this.
    Is this 50000, which we give here or the one we have to pick from GL (FS00) ??
    Since, this calledup capital I cannot find in my GL (FS00).
    Similarly all, the other BASIC SET`s aswell ?
    Also, can we take all the GL`s available in my comp code instead ?? if so where ??
    Please suggest, thanks.
    Thanking in Advance,
    Raghav.

  • Service Order Actual costs and revenue

    Hi,
    Can you please let me know how to find actual costs and revenue related to service orders?
    what tables to go to?
    We are planning on going back to a service order from the billing document and get the actual labor costs.
    Thanks,
    MS

    Hi Mahesh,
    Thank you very much for that quick response.
    EKKO is for purchasing documents. Can you please let me know how to use it for my service order?
    Thanks,
    Maulik Shah

  • SES report based SES sheet and Posting date wise

    Hi All,
    Please let me know is there any standard report is available to view the SES sheets created against a PO and within a date range (posting date based).
    I have tried below T-Codes but  i am not getting Posting date field in these codes.
    1.ME2S
    2.ML84
    3.MSRV6
    Regards,
    Bhadra

    May I know what do your mean by posting date ?
    When you accept the SES, at that time you can see posting date..
    Either there are two date you can see in SES,
    1. Document Date , 2. Created Date.
    The document date will shows in every report..
    But Created date will available only in table level..
    Check table ESSR, Here you will find entry date, SES number and PO number also..
    Regards
    Dev

  • Production Order Actual Cost

    Hi,

    HI,
    Can you describe what you actually want to know specifically?
    Unable to understand your problem.
    Regards,
    Tejas

  • Actual cost is coming zero in service order

    Hi experts
    I am newer in CO.i can not recognise that "Actual cost is coming zero in service order".Please let me know that sollution
    thanks in advance
    sachin

    Have the cost data been archived? If not, please check configurations and whether there is do actual goods issue or activity confirmation posted. Check plan and actual costing variant under tab page 'Control', BOM structure under tab page 'Components' and Routing structure under tab page 'Operations'. And if any goods issue or activity confirmation to the order, cost can be analysed under tab page 'Cost'.

  • Internal Order Settlement Posting Date

    Hi gurus,
    Can I change the posting date on an Internal Order settlement or it has to be always the last day of the settlement period?

    Hi Susanna,
    Yes, you can change the posting date. On order settlement screen KO88 or KO8G, under extras you can find posting date where you can enter the new posting date however, it should be within the open period.
    Assign points if helpful
    Thanks,
    Manoj

Maybe you are looking for