Posting row of CO document not consecutive.

Hi,
There are some confirmations on WBS elements. In the CO document the posting row is like 1,2,4,5,7,8,10....
So basically, multiples of 3 are missing from the document althought the document is complete.
Note that the document itself is complete - no lines are missing - it is only that the posting row does not generate line 3,6,9 etc
Consequenly the field DOCLN of GLPCA also does not have numbers 3,6,9 etc.
Does anyone have any clue why this behavior?
BR
Abhi

Hi,
Please check SNRO and check the buffer and number ranges there for the CO
many Thanks

Similar Messages

Error in Posting Excise Invoice - Accounting document not generated !

Hi,
We have done the GR using MIGO-Only Part I, captured in the Excise Invoice using J1IEX and these two transactions are OK.
While we are trying to post the Excise Invoice, the system is displaying the following error:
Accounting document not generated!
Message no. 4F186
Please guide.
Please note that we are running the transaction in the Pre-production server for the very first time.
Also would like to know what all reports I should run related with Excise. Someone told me that I should run the T Code J1I5 & J2I5 to update the RG23 register the next day of the transaction the entry related with excise is not updated on the same day. I think the updation of register should be automatic
Regards,

Hi,
I am repeating my Process/Question:
We have Created a Purchase Order with Tax Code (JMOP) related with Excise (Cenvatable).
We did the Goods Receipt (MIGO-> Only Part 1)
We did the Capture Invoice (J1IEX).
Till here every thing is OK.
While Posting the Excise Invoice (J1IEX), the system is giving the follwoing error:
Accounting document not generated!
Message no. 4F186
On Simulation window, the System is displaying the following CENVAT Posting:
24820020           Dr.      1,058.00
24820000           Dr.      105,840.00
24820010           Dr.      2,117.00
13113920           Dr.     109,015.00
But when we click on the Post CENVAT Button, the system is displaying the message "Accounting document not generated !" and exits.
Please guide.
Please note that we are running this Transaction on the Pre-production Server; On the Development Server it is working fine.
Regards,

Application document not posted / business partner in RPM

Hi,
We tried to import data from ECC HCM System to RPM system, by using tcode PFAL, and when we review the result with tcode bd87 (receiver system) these errors occurs:
51 Application document not posted.
52 Application document not fully posted.
The result it's that we have the HCM Organization created, the positions created, but instead of having person created, we have object "central person". So, in the transaction BP in RPM we can not see the business partner like employee.
In the sap note 1311399 we saw the reason why we have central person created, and not the object person. That is because exits infotype 105 subtype 01.
How can we create these persons like business partner in RPM?
Thanks in advance.
Albio
Edited by: Albio Vivas on Oct 20, 2010 12:02 AM

Hi,
In the receiver system (RPM) we don't have this program "hr_sync_person", but we have this one: "HRALXSYNC".
In the source system (ECC HR) we have both programs hr_sync_person and hralxsync.
1) Are the same programs or similar?
2) The program must be executed in the receiver system (RPM) or in the Origin HR system (ECC)?. (remember we don't have in the receiver system the program hr_sync_person).
3) I tried with the hralxsync in the RPM system (receiver hr data), we executed and we don't have a buttom "repair" instead of that there is a buttom "start syschronization procedure with partner (F8)". But nothings seems to happens.
Thanks,
Albio.-

Error in document date & posting date-- Posting period 001 2008 is not open

hi guru's
while doing vendor creation in XK01, i m not getting the data screens like address, ..etc.i m getting error..posting period not open". what does it mean..
What date i need to give in both fields...?
can anybody send a set of data for me to create a vendor to test for my bdc/lsmw?
can any help me step by step vendor creation in xk01,
I am getting this below....
Posting period 001 2008 is not open
Message no. F5201
Diagnosis
Period 001 of fiscal year 2008 is not open for posting for the variant of posting period 1000.
System Response
Processing cannot be continued.
Procedure
The error can have several causes. In order to eliminate the error, proceed as follows:
1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
2. Check whether the required posting period is open for posting for the variant of posting period 1000 and account type +. Make sure that the period is open for posting.
To do this, specify a period interval in which the required period for the variant of posting period 1000 and account type + is contained.
Proceed
thanks

Hi
Kris is right, that message means you can't post a FI document in the period 1 (probably Gennuary) of the 2008, but this can't mean you can't create a new vendor.
So are you sure on trx?
If the trx is right perhaps somebody has inserted a control in a user-exit.
Max

Posting period 011 2013 is not open while posting the document using F-02 getting the error

Hi SAP Captains,
Pls help me here.
While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
Please help me how to do, can you provide step by step.
Rgds..Suresh

Hi Suresh,
You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
If it is past, open the FI posting periods in OB52.
BR, Srinivas Salpala

Error while posting payroll results to FI - Documents not getting created

Hi all,
While posting payroll results to FI for Dec 2011 a failure of our Production Server resulted in erroneous posting of payroll
results. Posting run no: 1756 did not get posted at all though the run
status shown was "document posted". The issue was resolved by resorting
to manual posting of entries.
Now we are unable to post payroll results for Jan 2012 for the same
range of employee numbers for whom the manual posting was made for Dec
2011. No posting documents are getting created.
Kindly suggest how to resolve the issue.
Regards,
Sunil

Hi All,
I raised an OSS for the issue. SAP Support provided a solution for the problem. The solution involved cancelling a reversal which we had tried and failed followed by re posting the run no 1756. Our manual entries had to be reversed.The solution is given below.
Please follow these steps:
- Select the posting run 1756
- Menu => Edit => Reversal => Reset after termination
- After last step the status of the posting run should appear as
'documents posted'
- Go to transaction SM13
- Select by user 8273 and date 02.01.2012
- You should see an entry like this:
400 8273 02.01.2012 15:26:57 @07\QEnqueues released@ Error
- Select the entry and press the button 'Single test'
- In case the system shows an error, please send the message back to us
- In case the system shows no errors => press button 'Repeat update'
- Then check in PCP0 and FI is the document has been correctly posted.
Regards
Sunil

Controlling Document Not Getting Posted

Dear All,
We have a peculiar scenario of Controlling Document not getting posted. Any pointers on wat could be the issue will be highly helpful.
Scenario:
We have an interface which posts an accounting document.
Dr. Expense
Cr. Balance Sheet.
The Cost Center is supplied thru the interface and FI document and Profit Center Document is posted without any issues. However, CO document is not generated, not sure wat could be the issue. We have performed the basic checks. Also, for the same expense account, we observe some postings have gone into CO where are some didnt'. The difference between documents posted with corresponding CO and documents without corrsponding CO posting is only the "Transaction Key". When we maintain blank Transaction key.. the system posts CO document, when transaction key is "WRX" for that specific GL the system doesn't post.
Not sure why Standard SAP behaves like that. Please advice wat items i need to check to resolve
this.
regards
Diwakar

Hello,
Make sure in OBYC, for key WRX, you have maintained the GL accounts.
Regards,
Ravi

Extended Payment Order with status 51 Application document not posted in IHC

Dear Gurus,
We are make an extended payment order (PAYEXT), through the transaction F110, and then when we want to see the IDOC (by Tx. WE02) we have the following error in the Inbound IDOC´s:
IDoc: 0000000002179110 Status: Application document not posted
Error Message: A transaction type could not be (uniquely) determined - IHC 0308
We enter a payment method and payment method supplement in the proposal on F110.
I don´t know whats the reason of the error. I hope you can help me please.
Kind Regards,

Hi Jayj,
Thanks for your response. Sorry for the delay in responding you
I make the following steps to get the error:
1. I´ve created the invoice through FB60, on the company CO05.
2. IThen I pay the invoice by F110, (I´m attaching the log of the payment).
3. When I want to check by WE02 the IDOC the system generate the error message: a transaction type could not be determine. (I´m attaching the error message)
Please I hope you can help me.
Thanks a lot and kind regards,
Ivan R. Menacho

Profit Center Document not getting generated when direct FI doc is posted

Dear Experts,
Profit Center Document not getting generated when direct FI doc is posted. However CO Document is generated for Line Item 1 mentioned below.
Accounting Entry
Line 1 -Debit Expense ( Cost Center) 1000
Line 2 - Credit Bank 1000
Advance Thanks
Sanjai

Hi,
Pls check profit center configuration.... Some config might have missed.....
Use the t.code 1KE1 For analysing the profit center configuration.
Regards,
RAM
Edited by: Ram000 on Oct 7, 2011 10:45 AM

COPA Documents not getting posted - Doc with unauthorized busi.trans SD00

Dear Experts,
COPA Documents are not getting posted, although billing /accounting documents are getting posted
We are getting the below error message, when KE4ST is executed
Kindly share your inputs for this issue
Document with unauthorized business transaction "SD00"
Message no. KE/AD604
Diagnosis
Document 6000000026 cannot be transferred to Profitability Analysis (CO-PA) because the business transaction"SD00'"(Billing document) is not profit-related.
System Response
The document is not posted to CO-PA.
Procedure
If you decide that the document does contain data relevant to CO-PA and that it therefore should be posted to CO-PA, change your Customizing settings accordingly. Otherwise you can ignore this message.
Advance Thanks,
Sanjai

Hi,
   1. First please check if COPA is active in the system i.e. tcode KEKE
   2. Then check if operating concern is active in tcode KEA0
   3. If so then check if billing document has an account assignment to PA segment. If not then maybe you have changed the account assignment in OKC9.
   4. If all the 3 conditions above are satisfied then you need to check if this is a made-to-order scenario (MTO). A made-to-order scenario can be identified in COPA in that the billing doc will have an account assignment to a sales order in addition to a
PA segment (field vbap-kzvbr = 'E' and vbap-vbelv = sales order no).
If the above conditions are satisfied then from a COPA point of view it is a MTO. In this case the invoice will be assigned to the sales order and will not be directly transferred to COPA. With the order settlement the costs and the revenues (invoice) will then be posted to COPA.
regards
Waman

Accounting document not posting in production using FIPP

hi all,
I had copied a workflow to post the accounting document. i am using release and post methods in that. it is working fine in development. initially when the document is parked, in the header of the document in workflow control i found that release necessary check box is checked which is same in the production. in the development whenever i am releasing the document the document is getting posted, but in production i am getting the status as released only(relesed check box is checked). and complete check box is not checked( though the document is complete) and document is not getting posted. i noticed in the workflow log that the post block is executed succesfully. the binding are similar to that in the development.
can any one help me out where the problem is.
Thansk & regards
sreehari p

Hi Sreehari,
Test the Post method of BOR FIPP separately using SWO1 transaction for the same Accounting Document. And check if it posting. If it is not then debug the method and try to figure out why it is not posting.
Regards,
Devananda A J

Accounting document not created at the time of capture and post excise duty

Hi
Accounting document not created at the time of capture and post excise duty
Please explain what the reason
Regards,
Channa

reloved myself

Document not found. Excise posting not done or document is archived.

Hi,
I have created an order, delivery and billing document. Billing doc has been released to accounting. However though the accounting doc has been generated, the excise invoice is not generated and also BED, EDCESS & VAT amount not disable. When I was doing the Excise invoice (T code: j1iin) I got the following error
Modvat utilization done already for XXXXXX of Delivery No: XXXXX
Message no. 8I446
Diagnosis
Modvat utilization done already for mentioned billing document
Procedure
Check the billing document entered
If I click on display button after that I got error like
Document not found. Excise posting not done or document is archived.
Message no. 8I301
Diagnosis
The entered document number could not be found either because it is not
correct or the document has been archived
Procedure
Please check the entered document number
Plz help me what cud be the reason for that.
Regards
LVK

Dear LVK
Go to SE16, input Table J_1IEXCHDR and execute. There input the excise invoice number and execute. Check whether system is showing a document. Alternatively, without giving any data in the above table, just give the excise invoice date and execute. Check whether the said excise invoice is stored in the table.
thanks
G. Lakshmipathi

Posting document not created (Pricing Error)

Hello Everybody,
I have a problem with a invoice. If i go to VF03, I can see a positing status as F Posting document not created (pricing error). The error message is showing as pricing error in item 000010 Message No. VF 073. Kindly help me how to unblock this invoice.
Your help much appreciated.
Regards,
Ravi

Hi,
I think problem is in VKOA settings. Please go to VF03. Press Shift + F11. System will lead to Revenue Account Determination analysis. Please check the settings.
Regards,
Jigar

Posting Document not created (export data missing)

We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
Can any one suggest the solution for this?
Thanks.

Hello Mohammad,
About this issue, the incompletion of this cancellation document
arises might because the reference delivery has been archived/deleted.
This is likely due to your current copy control settings (VTFL).
If you have set ' ', in the export determination field this means that
there is a common 'exnum' key between the delivery and billing documents
LIKP-EXNUM & VBRK-EXNUM are the same.
The result of deleting the delivery is that you also delete the FT data
for the delivery, Because the billing document and delivery share the
same foreign trade table entries, you have in effect deleted the FT data
of the billing document too. This would most likely go unnoticed but if
you then cancel the invoice the system has no FT to copy into the new
cancellation billing document, which leads to this issue.
Firstly you should set the export determination flag in the copy control
of the delivery & billing documents. This will avoid this issue in the
future. Set it to to 'A' or 'B' depending on your requirements.
For the incomplete cancellation billing document, you could use userexit to
set it as complete:
You can use transaction CMOD.
Create a project for example FT project button create short text: ....
drop button Enhancement assignment & save use for example local object.
Use the F4-help for Enhancement and look for V50EPROP.
Drop button Components:
here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
The coding in the userexits should be: C_COMPLETE = 'X'.
Afterwards activate generate ... and save.
The development class is VEI.
Please also check note 118573 which explains the FT user exits.
Regards,
Alex

Posting row of CO document not consecutive.

Similar Messages

Maybe you are looking for