Posting the MIRO Document with reference of PO

Hello friends
while user posting the MIRO Document with reference of PO , he is getting difference in balance
Total amount is 31,237.00
Posting amount is 28,320.05
Balance amount is 2,916.95 this balance amount not getting post in MIRO
Before that i have seen GR amount is 28,320.05 but In IR amount same 28,320.05 but withholding tax tab not appering withholding tax  amount
Can any body please  help me on the same
Regards
sudharshana vamsi
Edited by: asuvamsi on Feb 24, 2010 1:43 PM

Hello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed.  it is just an information message not an error message.  this message will trigger when the trans. type is non project type activity.  No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi

Similar Messages

  • I am not able to post the MIRO Document with reference of PO

    Hello friends
    My user while posting the MIRO document TDS (service tax ) amount not appering in the MIRO screen
    But last month it was working fine.
    before that i have checked out  vendor master in that they given tax code properly.
    can any body please give me suggestion on the same
    Regards
    vamsi
    Edited by: asuvamsi on Mar 2, 2010 4:53 PM

    Hello friends
    Thanks For all my problem was resloved
    Solution is
    An message has been occuring like withhold tax has been refreshed.  it is just an information message not an error message.  this message will trigger when the trans. type is non project type activity.  No back end process has been disturbed due to this message. it just passing the information to the user.
    we changed the trans. type to manufacturing activity and it is working fine.
    I hope it ll help in future
    Thanks and Regards
    vamsi

  • BAPI for Posting the WIP document with respect to profit center

    Hi All,
    as per the SAP standards SAP posts the WIP revaluation to the profit center of the subcomponents instead of profit center of the manufactured material..
    But now i have write a logic to  make correcting entries for WIP revaluation to the Profit Center of the Manufactured Product.
    I have to  Post an accounting document with the adjustment posting (Revaluation Document) as of the last day of the Period.
    If the Revaluation Amount is POSITIVE, the DEBIT is to Profit Center of the Manufactured Material and CREDIT is to the Profit Center of Subcomponent Material/ Activity.
    If the Revaluation Amount is NEGATIVE, the CREDIT is to Profit Center of the Manufactured Material and DEBIT is to the Profit Center of Subcomponent Material/ Activity.
    Can any one suggest me the  Function module which available to post the this type of document ?
    Regards,
    Praveen

    Hi Ajit,
    My requirement is to get the total of GL balances for the respective profit center.
    But in Report i didn't found profit center parameter.
    Thanks

  • Call transaction FB70 while posting the MIRO DOcument

    Dear All,
    My Requirement is , When ever the user posts a MIRO document for a particular PO document type, then automatically a customer invoice(FB70) has to posted automatically in the back end.
    If there any BAdi or user-exits are there for the above requirement, please tell me.
    Thanks In Advance.

    Thanks for your reply
    yah....i have seen in PO in that  VAT is V0 0% tax but if i went seen in withholding tax  there is no amount in the withholding tax  filed
    Can please suggestion on the same
    Reagrds
    vamsi

  • Problem in posting the goods receipt with reference to the inbound delivery

    Hi All,
    Below is the explanation of the scenario:
    1. Materials are purchased (PO created in CAS as order unit) and inbound delivery document is created in cases as well.
    2. When the TO is created for put away (we are performing put away using the hand held devices) the line item is split resulting in new line item number created
    3. When the TO is confirmed the del quantity on the split line item is zeroing out and as a result the system is treating it as a service item with zero del quantity and is stopping from performing the GR with respect to the inbound delivery document
    And also the inbound delivery is disappearing from the confirmation tab on the PO)
    This is happening only with the materials which have an alternate unit set up in the material master (in this scenario CAS is the order unit and JAR is the base unit of measure)
    Can some one help fix this?

    Hi,
    There is no standard option available and I don't think that there is any feasible way of stopping this without the use of a user exit (as already suggested).
    But even the user exit option would be complex because it would have to block off the PO number field after enter (or any other key) was pressed.
    It would also have to stop the use of multiple entries via the "find" option.
    If you have a valid reason for doing this, have you thought of trying to get your users to do as they are told instead of changing the system?
    Why is it important to have one PO per GR ?
    Steve B

  • Posting a Credit Memo with Reference to the Invoice

    Dear all,
    I'd like to post a Credit Memo with Reference to the Invoice but in transaction FB65 or I can't find field to input Reference to the Invoice
    Please tell me where I can Reference to the Invoice
    Thank in advance
    Minh

    Dear all,
    When I create a a Credit Memo (Transaction FB65),
    On the Payment tab page in the Enter Vendor Credit Memo,the system doesn't display field Invoice Reference to input Invoice document number of an invoice reference exists.
    Please tell me how to configure to display field Invoice Reference
    Thank in advance
    Minh

  • One MIRO document with two different vendors for two different line items

    Can it possible to make MIRO for a PO which is having two conditions(Basic price+Freight) with two different vendors.
    MIRO document needs:
    GR/IR Clearing    Dr.
    Freight Clearing  Dr.
    Vendor RM(X)         Cr.
    Vendor Freight(Y)   Cr.
    Is it possible to post the above document at a time not individually for each condition.

    Hi,
    Yes, It is possible to post Material and delivery cost in one document.where in material supplier is different than the Frieght vendor.
    Itm PK  BusA Acct no.   Description                    Tx     Amount in   USD   
    001 89       130001     Stock-Ingredients               244 0            880.00 
    002 96       320001     GR/IR Account - Ing.            244 0          1,200.00-
    003 86       520002     Ingredients - PPV               244 0          3,297.87 
    004 50       320008     GR/IR Account - Duty            244 0            797.87-
    005 50       320009     GR/IR Account - Fre.            244 0          2,180.00-
    Thanks
    Dinabandhu

  • Returns Process - Billing Document with reference to delivery

    Dear All,
    In standard returns process we are creating billing document with reference to sales order.
    How can we make the billing dcoument to be created with refernce to delivery as the business wants the invoice document to be created only when the delivery is posted.
    Kinldy advise what are the configuration settings required.
    With Regards
    Mohammed Raees
    Edited by: Raeesuddin Mohammed on Aug 30, 2011 7:25 PM

    Hi Raees,
    Isnt your process flow like this: Sales Order>Delivery>Billing>Return Order>Return Delivery-->Billing?
    In general, to ensure that you're creating the invoice always w/ref to a delivery document pls do the following:
    1) In VOV8, where you cnofigure your sales doc type remove the order related billing i.e. keep it blank.
    2) In VOV8, put the billing doc in delivery relevant doc.
    3) In VOV8, in shipping section put the delivery doc type.
    4) Create copy controls between the delivery doc type and billing in VTFL at header and item levels.
    5) In the item category for this order type+ item cat grp ensure the billing relevance is either B, C or F.
    6) Maintain no copy controls between sales order and the billing in VTFA.
    I hope this helps.
    Regards,
    Raghu.

  • How to park document with reference?

    Hi All,
    We have function to post document with reference in SAP but how about park document with reference?
    Can anybody help me?
    Thanks n really appreciate

    Thanks for your reply. Fyi, I've applied employee limitation to post manual journal at tcode OBA4 and OB57.
    User A : >100K - 500K
    User B : >500K - 1 MILL (Asst. Manager)
    User C : >1 MILL (Manager)
    Normally user A will park all the journals but after apllied the limitation, user A only can park for the journal (normal tcode F-02 or other tcode) which not more than 500K. The limitation affect the park as well.
    Alternative for tcode F-02:
    User A : Park doc at FB50 (any amount) and post at tcode FBV0 by other user. There's no park or post with reference.
    User request to park with reference.. Any idea?
    Thanks friends

  • Posting a parked document with a  BI session

    Hi, I am trying to post a parked dokument in FI through a  batch input session.
    The problem is that the parked dokument is yet not complete and I want to complete it with the missing line items and post it in one step, meaning with one batch input. is that possible? especially in using the RFBIBL for triggering the batch input session.
    Is it possibel to post a parked document with FB01 when parked dokument and 'new posted document' have the same document ID? what happens with the parked document if this is possible?
    thanks! for your help
    denise

    Hi
    I suspect it may not be possible. The only option i could see in FBS1, is Post with reference, but again it would not accept parked document as reference
    Thank You,

  • The user exit on the sap post the account document

    Dear all.
       I use the t-code mb01 or migo to receipt goods for purchase order.When I execute post or save,the sap generate the material document and the account document.The account documents have two item with account 12110000 and account 12010000.And I know this two account was configure in the t-code omwb.
       Now my company have a new requirement:
       When the sap generate the account documents,I need to write some code to do some judgement and change the account 12110000 to account 35510000 or other account.The logic of the code was complex and it's impossible to do in sap standard configure.So I want to find the user exit on the sap post the account document.In the user exit I would write some code to do some judgement and change the account 12110000 to account 35510000 or other account.
      But I can't found the user exit.So I need the experts to give me some reference.
    Regard
    Yoda

    Hi,
    You may use ZXF48U01 of EXIT_SAPLF048_001 of enhancement F180A001 for the same.
    Please note that control comes here for no of transactions hence you need to specifically check for sy-tcode, for which your 'exit' logic needs o be executed.
    I hope this helps,
    Regards
    Raju Chitale

  • Issue in printing the batch document with the T-code COPI

    Issue in printing the batch document with the T-code COPI.
    So Batch document is not printing not printing.
    Kindly help.

    I would suggest to read this blog as a starting point: Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers
    then rephrase and enhance your question with some facts because in the moment it is not at all sufficient enough for anybody to help you further on your particular issue.
    I am even in doubt that you posted this issue in the right forum, has this PP transaction really something to do with ABAP Connectivity. Check the space overview page of ABAP Connectivity , under the picture you can read what this space is about.

  • How to remove the option GR with reference to PO from MIGO?

    Hi All,
    We are doing the Goods receipt with reference to Inbound Delivery (in T code MIGO).
    And never use the option Goods receipt with reference to Purchase Order.
    So, we want to remove this option Goods receipt with reference to Purchase Order.
    Is it possible and how?

    Dear,
    Goto - SPRO - MATERIAL MANAGEMENT - INVENTORY MANAGEMENT AND PHYSICAL INVENTORY - SETTINGS FOR ENJOY TRANSACTIONS - SETTINGS FOR GOODS MOVEMENTS - SETTINGS FOR TRANSACTIONS AND REFERENCE DOCUMENTS.
    Once select this option, from the next window open - select the appropriate action usually - MIGO-GR.
    Then select Transaction / Event.
    Then select again GOODS RECEIPT and double click on REFERENCE DOCUMENTS.
    DE-ACTIVATE purchase order check box and save.
    No need to delete purchase order option, just de-activate it.
    Try this.
    Regards,
    Syed Hussain.
    Edited by: Syed Hussain on Aug 29, 2009 10:37 AM

  • How to post a PARK document with Withholding Tax

    Hi All,
    I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
    "Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
    The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
    My entries are :
    29J Vendor a/c  Dr.
    50   XYZ a/c
    If i using F-02 and not parking ;then it is getting posted.
    Note: Line Item is a special G/L Indicator
    Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

    Hi Parag,
    Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
    But,when posting the parked document ,it is asking for Section Code.
    The error message displayed is:
    "Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

  • BAPI to create a billing document with reference to delivery or sales order

    Hi,
    Does anyone know any BAPI or function module that allows the creation of a billing document with reference to a sales order or to a delivery.
    Maybe the BAPI_BILLINGDOC_CREATEFROMDATA may be used to create a billing document with reference to a sales document, but i'm looking for a solution where I only need to indicate the number of the reference sales order or the reference delivery and maybe some few data more without the need of transfer all the items and conditions information.
    Thanks.
    Kind regards,
    Paulo Sousa

    Hello Paulo,
    To create a billing document based on a delivery use BAPI_BILLINGDOC_CREATEMULTIPLE. In table BILLINGDATAIN insert one line with the following data:
    REF_DOC = Delivery number
    REF_DOC_CA = 'J'
    If it runs fine, table SUCCESS will bring back useful data, like BILL_DOC (Billing document number).
    Regards,
    Joã

Maybe you are looking for